Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ThIn”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Formation of Vertically Oriented Channels during Calcination of Surfactant-Templated Titania-Doped Mesoporous Silica Thin Films

Here, the mesoporous structure development during calcination of titania-doped mesoporous silica thin films is characterized by in situ grazing-incidence small angle x-ray scattering (GISAXS). Varying amounts of titania (≤ 6 mol%) are incorporated in cetyltrimethylammonium bromide (CTAB) templated film by two methods in this study: dispersion of titania in the silica matrix, and fixing titania at the pore surface by complexation of the titania precursor with a sugar-based co-surfactant, dodecyl maltoside (C 12 G 2 ). Before calcination, films templated with only CTAB display a mesoporous structure with a mixture of in-plane 2D hexagonal and randomly oriented porous structure, while C 12 G 2 -complexed film possessed randomly oriented mesostructure only. Both methods yield a final structure of hexagonal close-packed pores orthogonally oriented to the substrate after calcination at 500 °C. This is attributed to weak Si-O-Ti bonds which allow sintering to occur at 500 °C, combined with unidirectional thermal contraction of the film in the vertical direction. Anisotropic stress and annealing of the films allows the randomly oriented pores to merge vertically and form channels with pore diameter of 2.3 ± 0.3 nm. Titania doping greater than 1% is required for this transformation in films with no C 12 G 2 surfactant used while the transformation was observed for films with C 12 G 2 complexation even at low (0.005%) titania doping, perhaps accentuated by orientational disorder introduced by the sugar surfactant.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Structure and Desorption Kinetics of Acetonitrile Thin Films on Pt(111) and on Graphene on Pt(111)

Acetonitrile thin films were prepared on Pt(111) and on graphene on Pt(111) using molecular beam techniques. Temperature programed desorption (TPD) experiments of acetonitrile on Pt(111) displayed first-order kinetics for monolayer desorption and zero-order kinetics for multilayer desorption. We used reflection adsorption infrared spectroscopy (RAIRS) to characterize the orientation of the monolayer on Pt(111). Acetonitrile molecules have been shown to adopt a bridging structure where the C=N bond breaks to form two single bonds to underlying platinum atoms. When Tdeposition = 120 K our RAIRS spectra are consistent with this bridging configuration. However, when Tdeposition was lowered to 60 K molecules retained the C=N bond and adopted a vertical orientation with the nitrogen closest to the platinum. On graphene, the TPD experiments show that both the monolayer and multilayer desorb with zero-order kinetics. Our RAIRS spectra suggest that the monolayer consists of acetonitrile molecules oriented with their molecular axes parallel to the graphene substrate. This orientation did not change when Tdeposition was varied from 60 to 120 K. Our results provide a more complete picture of how acetonitrile molecules interact with Pt(111) and with graphene surfaces.

desorption tin films, molecules, thin films, desor↗
DOE OSTI2020

Opportunities in the Synthesis and Design of Radioactive Thin Films and Nanoparticles

Studies of radioactive isotopes at the liquid-solid or gas-solid interface are enabling a detailed mechanistic understanding the effects of radioactive decay on physical, biological, and chemical systems. In recent years, there has been a burgeoning interest in using radioactive isotopes for both imaging and therapeutic purposes by attaching them to the surface of colloidal nanoparticles. By merging the field of nanomedicine with the more mature field of internal radiation therapy, researchers are discovering new ways to diagnose and treat cancer. In this perspective, we discuss state-of-the-art radioactive thin films as applied to both well-defined surfaces and more complex nanoparticles. Here, we highlight the design considerations that are unique to radioactive films, which originate from the damaging and potentially self-destructive emissions produced during radioactive decay and highlight future opportunities in the largely underexplored area between radioisotope chemistry and nanoscience.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Using Grazing-Incidence Small-Angle Neutron Scattering to Study the Orientation of Block Copolymer Morphologies in Thin Films

Here, we used grazing-incidence small-angle neutron scattering (GISANS) to probe the depth-dependent orientation of self-assembled morphologies of block copolymers. A hydrophobic–hydrophobic block copolymer, poly(solketal methacrylate)-block-polystyrene (PSM-b-PS), was synthesized and spin-coated into films tens of nanometers in thickness where the polymers adopted a disordered state. PSM-b-PS was then hydrolyzed by exposing the polymer thin film to trifluoroacetic acid vapor or embedding a photoacid generator in the film during spin coating, followed by exposure to UV light. The hydrolysis converted the block copolymer into a hydrophilic–hydrophobic block copolymer, poly(glycerol monomethacrylate)-block-polystyrene (PGM-b-PS), significantly increasing the segmental interaction parameter (χ) and causing microphase separation of the copolymers. GISANS was used to study the depth-dependent structure of the films and revealed that the orientation of the microphase-separated structure differed at the polymer–air and polymer–substrate interfaces. In the regions where the lamellae were parallel to the interfaces, the orientation propagated into the film from the interfaces. However, in the areas where the lamellae were perpendicular to the interfaces, the orientation did not persist with increasing distance from the interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Hydrolysis-Induced Morphology Evolution of Linear and Bottlebrush Block Copolymers in Thin Films with Acid Vapor or Photoacid Generators

The self-assembly of high-χ low-N block copolymers (BCPs) can give patterns with sub-10 nm full pitch, serving as a promising alternative to photolithographic methods. Here, in this work, we synthesized poly(solketal methacrylate)-block-polystyrene copolymers, PSM-b-PS, with various volume ratios of the two blocks. After hydrolysis of the PSM block into poly(glycerol monomethacrylate), PGM, the BCPs had both lamellar and cylindrical microdomain morphologies in the bulk phase and in thin films. In addition to our previously developed solid-state hydrolysis strategy involving trifluoroacetic acid vapor, we developed a new photoinduced solid-state hydrolysis using photoacid generators, PAGs, embedded within the polymer films. After exposure to UV followed by a postexposure baking or solvent vapor annealing, the BCPs transitioned from the disordered, phase-mixed state into laterally ordered cylindrical patterns. In comparison to linear BCPs that rely on a random copolymer layer to modify interfacial interactions with the substrate to promote an orientation of the microdomains normal to the interface, we found that the microdomains in bottlebrush multiblock copolymers oriented normal to the interface absent substrate modification due to the chain architecture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Wet Brush Homopolymers as “Smart Solvents” for Rapid, Large Period Block Copolymer Thin Film Self-Assembly

The spontaneous formation of periodic nanopatterns through the self-assembly of block copolymer (BCP) thin films offers an enticing path to engineer functional material properties over large areas, but the prohibitively slow ordering of ultrahigh molecular weight BCPs that generate large pattern periods (>100 nm) severely restricts the design space in which BCPs may be used. Here, we demonstrate that blending lamellae-forming polystyrene-block-poly(methyl methacrylate) diblock copolymers with very low molecular weight polystyrene and poly(methyl methacrylate) homopolymers can reduce by an order-of-magnitude the times required to form ordered large period patterns through solvent vapor annealing. Using in situ grazing-incidence small-angle X-ray scattering and ex situ electron microscopy, we show that the added homopolymer plasticizers act as a “smart solvent”: They increase the mobility of the long BCP chains by amplifying the dilution effect during solvent vapor annealing but segregate to like domains during subsequent thermal annealing to produce high-quality patterns with periods that may exceed 200 nm, which are readily transferred to other materials. The dramatic impact of homopolymer plasticizers may help extend the use of BCPs into new areas, particularly for visible light photonic applications that demand larger period nanopatterns.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Multifunctional Metal–Oxide Nanocomposite Thin Film with Plasmonic Au Nanopillars Embedded in Magnetic La 0.67 Sr 0.33 MnO 3 Matrix

Searching for multifunctional materials with tunable magnetic and optical properties has been a critical task toward the implementation of future integrated optical devices. Vertically aligned nanocomposite (VAN) thin films provide a unique platform for multifunctional material designs. In this work, a new metal–oxide VAN has been designed with plasmonic Au nanopillars embedded in a ferromagnetic La 0.67 Sr 0.33 MnO 3 (LSMO) matrix. Such Au–LSMO nanocomposite presents intriguing plasmon resonance in the visible range and magnetic anisotropy property, which are functionalized by the Au and LSMO phase, respectively. Furthermore, the vertically aligned nanostructure of metal and dielectric oxide results in the hyperbolic property for near-field electromagnetic wave manipulation. Such optical and magnetic response could be further tailored by tuning the composition of Au and LSMO phases.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Observation of Coexisting Weak Localization and Superconducting Fluctuations in Strained Sn 1– x In x Te Thin Films

Topological superconductors have attracted tremendous excitement as they are predicted to host Majorana zero modes that can be utilized for topological quantum computing. Candidate topological superconductor Sn 1–x In x Te thin films (0 < x < 0.3) grown by molecular beam epitaxy and strained in the (111) plane are shown to host quantum interference effects in the conductivity coexisting with superconducting fluctuations above the critical temperature T c . An analysis of the normal state magnetoresistance reveals these effects. A crossover from weak antilocalization to localization is consistently observed in superconducting samples, indicating that superconductivity originates dominantly from charge carriers occupying trivial states that may be strongly spin–orbit split. A large enhancement of the conductivity is observed above T c , indicating the presence of superconducting fluctuations. Furthermore, our results motivate a re-examination of the debated pairing symmetry of this material when subjected to quantum confinement and lattice strain.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Light-Induced Structural Dynamics and Charge Transport in Layered Halide Perovskite Thin Films

The dynamic nature of the metal halide perovskite lattice upon photoexcitation plays a vital role in their properties. Here we report an observation of light-induced structure dynamics in quasi-2D Ruddlesden–Popper phase perovskite thin films and its impact on the carrier transport properties. By a time-resolved X-ray scattering technique, we observe a rapid lattice expansion upon photoexcitation, followed by a slow relaxation over the course of 100 ns in the dark. Theoretical modeling suggests that the expansion originates from the lattice’s thermal fluctuations caused by photon energy deposition. Power dependent optical spectroscopy and photoconductivity indicate that high laser powers triggered a strong local structural disorder, which increased the charge dissociation activation energy that results in localized transport. Finally, our study investigates the impact of laser energy deposition on the lattices and the subsequent carrier transport properties, that are relevant to device operations.

2D perovskites↗
DOE OSTI2024

Layer Resolved Cr Oxidation State Modulation in Epitaxial SrFe 0.67 Cr 0.33 O 3−δ Thin Films

Understanding how doping influences physicochemical properties of ABO 3 perovskite oxides is critical for tailoring their functionalities. In this study, SrFe 0.67 Cr 0.33 O 3−δ epitaxial thin films were used to examine the effects of Fe and Cr competition on structure and B-site cation oxidation states. The films exhibit a perovskite-like structure near the film/substrate interface, while a brownmillerite-like structure with horizontal oxygen vacancy channels predominates near the surface. Electron energy loss spectroscopy shows Fe remains Fe 3+ , while Cr varies from ∼Cr 3+ (tetrahedral layers) to ∼Cr 4+ (octahedral layers) within brownmillerite phases and becomes ∼Cr 4.5+ in perovskite-like phases. Theoretical simulations indicate that Cr–O bond arrangements and the way oxygen vacancies interact with Cr and Fe drive Cr charge disproportionation. High-valent Cr cations introduce additional densities of states near the Fermi level, reducing the optical bandgap from ∼2.0 eV (SrFeO 2.5 ) to ∼1.7 eV (SrFe 0.67 Cr 0.33 O 3−δ ). In conclusion, these findings offer insights into B-site cation doping in the perovskite oxide framework.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Online Bayesian State Estimation for Real-Time Monitoring of Growth Kinetics in Thin Film Synthesis

Rapid validation of newly predicted materials through autonomous synthesis requires real-time adaptive control methods that exploit physics knowledge, a capability that is lacking in most systems. Here, in this study, we demonstrate an approach to enable real-time control of thin film synthesis by combining in situ optical diagnostics with a Bayesian state estimation method. We developed a physical model for film growth and applied the direct filter (DF) method for real-time estimation of nucleation and growth rates during pulsed laser deposition (PLD). We validated the approach using simulated and experimental reflectivity data for WSe 2 growth and ultimately deployed the algorithm on an autonomous PLD system during the growth of 1T'-MoTe 2 . The DF robustly estimates growth parameters in real time at early stages of growth, down to 15% monolayer area coverage. This fusion of in situ diagnostics, data assimilation, and physical modeling opens new opportunities in adaptive control of synthesis trajectories toward desired material states.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Electrical Detection of Spin-Hall-Induced Auto-oscillations in Lithium Aluminate Ferrite Thin Films

Ferrimagnetic insulators with ultralow damping are of great interest for their potential applications in energy-efficient computing devices. Here, we report the direct electrical detection of magnetic auto-oscillations in unpatterned ultralow damping ferrimagnetic insulator epitaxial Li 0.5 Al 0.5 Fe 2 O 4 thin films, driven by a current in a proximal Pt nanowire. Auto-oscillations occur for only one current polarity, consistent with the spin-Hall effect inducing the oscillation state. Micromagnetic modeling shows good agreement with the experimental frequency and field dispersions, showing only one dominant oscillation mode, in contrast to the multiple modes typically observed in transition-metal nanowire-type spin-Hall nanooscillators. This study illustrates a new material system for neuromorphic computing and magnonics, a simple material platform with the direct-current generation of high-frequency (~10 GHz) signals and their electrical detection.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Selective Oxidation and Cr Segregation in High-Entropy Oxide Thin Films

High-entropy oxides (HEOs) offer exceptional compositional flexibility and structural stability, making them promising materials for energy and catalytic applications. Here, in this study, we investigate Sr doping effects on B-site cation oxidation states, local composition, and structure in epitaxial La 1–x Sr x (Cr 0.2 Mn 0.2 Fe 0.2 Co 0.2 Ni 0.2 )O 3 thin films. X-ray spectroscopies reveal that Sr doping preferentially promotes Cr oxidation from Cr 3+ to Cr 6+ , partially oxidizes Co and Ni, while leaving Mn 4+ and Fe 3+ unchanged. Atomic-resolution scanning transmission electron microscopy with energy-dispersive X-ray spectroscopy shows pronounced Cr segregation, with depletion at the interface and enrichment at the surface, along with partial amorphization in heavily Sr-doped samples. This segregation is likely driven by oxidation-induced migration of smaller, high-valence Cr cations during growth. These findings highlight the critical interplay between charge compensation, local strain, and compositional fluctuations in HEOs, indicating that precise control over growth conditions is critical for tuning their surface composition and electronic structure toward more robust electrocatalyst design.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Grain Boundary-Limited Thermal Transport in Suspended Thin Graphite across an Unexplored Thickness Regime

Here, we present systematic thermal conductivity (κ) measurements of suspended thin graphite ribbons, 234–527 nm thick, using a four-probe 3ω method. Unlike recent reports of phonon hydrodynamics and exceptionally high κ in micrometer-thick graphite ( Science, 2020), we observe significantly lower κ and no signatures of collective phonon flow in this intermediate thickness regime. Instead, our measured κ lies between few-layer graphene and bulk graphite. These results agree with a first-principles-informed Peierls–Boltzmann transport model with spatially resolved Monte Carlo sampling. Additionally, the temperature for the peak κ shifts lower with increasing thickness, due to the interplay of phonon-boundary and phonon-isotope scattering. Incorporating grain boundary scattering into simulations is necessary to replicate the experimental trends. These findings delineate the boundary between ballistic, hydrodynamic, and diffusive transport regimes in graphite and underscore the dominant role of disorder and geometry in phonon transport in quasi-two-dimensional materials, offering insights for nanoscale thermal management.

Boltzmann transport model↗
DOE OSTI2020

All-Sputtered, Superior Power Density Thin-Film Solid Oxide Fuel Cells with a Novel Nanofibrous Ceramic Cathode

Thin film solid oxide fuel cells (TF-SOFCs) are attracting attention due to their ability to operate at comparatively lower temperatures (400–650 °C) that are unattainable for conventional anode-supported SOFCs (650–800 °C). However, limited cathode performance and cell scalability remain persistent issues. Here, we report a new approach of fabricating yttria-stabilized zirconia (YSZ)-based TF-SOFCs via a scalable magnetron sputtering process. Notable is the development and deposition of a porous La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 2.95 (LSCF)-based cathode with a unique fibrous nanostructure. This all-sputtered cell shows an open-circuit voltage of ~1.0 V and peak power densities of ~1.7 and ~2.5 W/cm 2 at 600 and 650 °C, respectively, under hydrogen fuel and air along with showing stable performance in short-term testing. The power densities obtained in this work are the highest among YSZ-based SOFCs at these low temperatures, which demonstrate the feasibility of fabricating exceptionally high-performance TF-SOFC cells with distinctive dense or porous nanostructures for each layer, as desired, by a sputtering process. This work illustrates a new, potentially low-cost, and scalable platform for the fabrication of next-generation TF-SOFCs with excellent power output and stability.

25 ENERGY STORAGE↗
DOE OSTI2020

Understanding and Advancing Bifacial Thin Film Solar Cells

Because bifacial solar cells increase the power generated per area, their market share is projected to increase over the next decade. While silicon technologies have implemented bifacial technology, little progress has occurred in bifacial thin film (BTF) solar cells. Understanding the factors that limit performance is critical to advancing BTF cells. We show that recombination at the back interface has limited device performance of fabricated BTF devices. Improved BTF performance will require decreasing recombination at the back interface, through passivation or by reducing downward band-bending at this interface. Increasing carrier lifetimes improves performance, but increasing hole density has little effect.

14 SOLAR ENERGY↗
DOE OSTI2020

Nano-Ceramic Cathodes via Co-sputtering of Gd–Ce Alloy and Lanthanum Strontium Cobaltite for Low-Temperature Thin-Film Solid Oxide Fuel Cells

We report the electrochemical performance and structural characteristics of porous nanostructured ceramic cathodes for thin-film solid oxide fuel cells (TF-SOFCs) based on yttria-stabilized zirconia (YSZ) electrolytes. The nanostructured cathode is obtained through magnetron co-sputtering of gadolinium–cerium (Gd–Ce) alloy and lanthanum strontium cobaltite perovskite targets. The resultant nanostructure and composition of the ceramic cathode are controlled by adjusting the co-sputtering conditions. The peak power densities in our fabricated TF-SOFCs are the highest reported values for YSZ-based electrolyte SOFCs, showing 0.14, 0.48, 1.21, 2.56, and 3.01 W/cm2 at 450, 500, 550, 600, and 650 °C, respectively, operating under air and pure hydrogen fuel. The results show that the porosity and composition of the cathode greatly affect the resulting peak power densities. This work illustrates the capability of sputtering to produce stable, scalable, nano-ceramic cathodes with superb peak power densities when integrated in TF-SOFCs.

25 ENERGY STORAGE↗
DOE OSTI2020

Effects of Oxygen and Water on the Formation and Degradation Processes of (CH 3 NH 3 )PbI 3 Thin Films

Thin films of lead halide perovskites have attracted considerable interest for optoelectronic applications, especially photovoltaics. The influence of oxygen and water have been well studied on fully formed films in an effort to improve and understand material stability. In this paper, we study the influence of oxygen and water exposure on unconverted, precursor films prior to the conversion to the (CH 3 NH 3 )PbI 3 perovskite phase. We find that, for the PbCl 2 synthesis route studied here, extended oxygen exposure can lead to increased PbI 2 in the final film. Additionally, a reversible transformation into the perovskite structure can be driven by exposure to high humidity, which we hypothesize is due to the deliquescent nature of methylammonium chloride in the precursor film. Upon prolonged exposure to humidity, the film undergoes an irreversible phase transformation to a previously unknown crystalline phase of (CH 3 NH 3 ) 2 PbI 3 Cl, the structure of which is solved using X-ray powder diffraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗