Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Application study of filamentary composites in a commercial jet aircraft fuselage

A study of applications of filamentary composite materials to aircraft fuselage structure was performed. General design criteria were established and material studies conducted using the 727-200 forebody as the primary structural component. Three design approaches to the use of composites were investigated: uniaxial reinforcement of metal structure, uniaxial and biaxial reinforcement of metal structure, and an all-composite design. Materials application studies for all three concepts were conducted on fuselage shell panels, keel beam, floor beams, floor panels, body frames, fail-safe straps, and window frames. Cost benefit studies were conducted and developmental program costs estimated. On the basis of weight savings, cost effectiveness, developmental program costs, and potential for early application on commercial aircraft, the unaxial design is recommended for a 5-year flight service evaluation program.

Johnson, R. W.↗

Experimental study of spectral and spatial distribution of solar X-rays

The study of the physical conditions within the solar corona and the development of instrumentation and technical expertise necessary for advanced studies of solar X-ray emission are reported. Details are given on the Aerobee-borne-X-ray spectrometer/monochromator and also on the observing program. Preliminary discussions of some results are presented and include studies of helium-like line emission, mapping O(VII) and Ne(IX) lines, survey of O(VII) and Ne(IX) lines, study of plage regions and small flares, and analysis of line emission from individual active regions. It is concluded that the use of large-area collimated Bragg spectrometers to scan narrow wavelength intervals and the capability of the SPARCS pointing control to execute a complex observing program are established.

Acton, L. W.↗

A study of multiplex data bus techniques for the space shuttle

A comprehensive technology base for the design of a multiplexed data bus subsystem is provided. Extensive analyses, both analytical and empirical, were performed. Subjects covered are classified under the following headings: requirements identification and analysis; transmission media studies; signal design and detection studies; synchronization, timing, and control studies; user-subsystem interface studies; operational reliability analyses; design of candidate data bus configurations; and evaluation of candidate data bus designs.

Kearney, R. J.↗

Study of buoyancy systems for flight vehicles

The performance potential of buoyant systems and flexible structures used in air vehicles for short-haul passenger transportation is discussed. The study was intended only to determine if sufficient performance potential existed, and to provide a focus for a more extensive design study, if such a study appeared desirable. A relatively conventional helium system was examined along with a more unusual configuration employing hot-air as the buoyant fluid. Both configurations were examined in the VTOL and STOL modes of operation. The helium system appears to have some superiority in the VTOL mode, while the hot-air system has a superiority in the STOL mode. Both configurations exhibit sufficient performance potential to suggest that a much more extensive design study might well be undertaken.

Havill, C. D.↗

LST phase A design update study

An update is presented of the Phase A study of the Large Space Telescope (LST), based on changes in guidelines and new data developed subsequent to the Phase A study. The study defines an LST concept based on the broad mission guidelines provided by the Office of Space Science (OSS), the scientific requirements developed by OSS with the scientific community, and an understanding of long range NASA planning current at the time the study was performed. A low cost design approach was followed. This resulted in the use of standard spacecraft hardware, the provision for maintenance at the black box level, growth potential in systems designs, and sharing of shuttle maintenance flights with other payloads (See N73-18449 through N73-18453)

Source record↗

Status of two studies on active control of aeroelastic response

The application of active control technology to the suppression of flutter has been successfully demonstrated during two recent studies in the Langley transonic dynamics tunnel. The first study involved the implementation of an aerodynamic-energy criterion, using both leading- and trailing-edge controls, to suppress flutter of a simplified delta-wing model. Use of this technique has resulted in an increase in the flutter dynamic pressure of approximately 12 percent for this model at a Mach number of 0.9 Analytical methods used to predict the open- and closed-loop behavior of the model are also discussed. The second study, was conducted to establish the effect of active flutter suppression on a model of the Boeing B-52 Control Configured Vehicle (CCV). Some preliminary results of this study indicate significant improvements in the damping associated with the critical flutter mode.

Abel, I.↗

Simulation studies and the design of the First GARP Global Experiment

Simulation studies have played an increasingly important role in planning for the First GARP Global Experiment (FGGE) during the last two years by providing information on the meteorological impact of various untested or incompletely tested elements of the GARP observing system. The studies are intended to provide information to FGGE planners on the capabilities of alternature systems for meeting a specific FGGE requirement. The simulation studies also provide a valuable input to cost-effectiveness studies by indicating tradeoffs of one possible type of observing platform against another, such as constant-level balloons vs buoys. These tradeoffs can lead to major gains in research yield per dollar of expenditure on the observing system.

Jastrow, R.↗

Advancement of proprotor technology. Task 1: Design study summary

A tilt-proprotor proof-of-concept aircraft design study has been conducted. The results are presented. The ojective of the contract is to advance the state of proprotor technology through design studies and full-scale wind-tunnel tests. The specific objective is to conduct preliminary design studies to define a minimum-size tilt-proprotor research aircraft that can perform proof-of-concept flight research. The aircraft that results from these studies is a twin-engine, high-wing aircraft with 25-foot, three-bladed tilt proprotors mounted on pylons at the wingtips. Each pylon houses a Pratt and Whitney PT6C-40 engine with a takeoff rating of 1150 horsepower. Empty weight is estimated at 6876 pounds. The normal gross weight is 9500 pounds, and the maximum gross weight is 12,400 pounds.

Source record↗

Viking '79 Rover study. Volume 1: Summary report

The results of a study to define a roving vehicle suitable for inclusion in a 1979 Viking mission to Mars are presented. The study focused exclusively on the 1979 mission incorporating a rover that would be stowed on and deployed from a modified Viking lander. The overall objective of the study was to define a baseline rover, the lander/rover interfaces, a mission operations concept, and a rover development program compatible with the 1979 launch opportunity. During the study, numerous options at the rover system and subsystem levels were examined and a baseline configuration was selected. Launch vehicle, orbiter, and lander performance capabilities were examined to ensure that the baseline rover could be transported to Mars using minimum-modified Viking '75 hardware and designs.

Source record↗

Studies of the structure of the plasmasphere as seen by radiosounder measurements aboard the Alovetti-satellite

The structure of the plasmasphere was studied as seen by radiosounder measurements aboard the Alovetti-2 satellite. Magnetic tape data files were obtained from the NASA Ames Research Center to give a reasonably complete set of high latitude electron density profiles. Considerable effort was expended to develop models of ion flow in the topside ionosphere. These models took both H(+) and O(+) into account and permitted various parameter studies to be made of the various factors which affect H(+) escape in polar wind flows. The results of these studies are included. Extensive computer programs were written to display the measured electron density profiles in ways useful to geophysical analysis. The expected mid-latitude trough was easily discernable in the nightime ionosphere at locations expected from similar observations of the plasmapause. In the dayside ionosphere, however, it proved extremely difficult to find any trough-like phenomena. Using the previously developed computer models, it was possible to study the region where the plasmapause appeared to be absent. It was found that over much of the dayside, large fluxes were computed well inside the plasmapause extending down to L-shells as low as 2.5.

Banks, P. M.↗

Severe weather study

Current methods of severe weather information dissemination and the impact of this information on the general public are studied. The study is based on the responses of the general public and the local broadcasters to a severe weather incident which occurred on August 14, 1972 in the Dane County-Madison Metropolitan area. The results of the study were somewhat startling. From the sample, for instance, it was found that 45% of the Dane County population was not aware of the severe thunderstorm warning. In this case this may or may not have been critical, but had the storm been extremely severe or had a tornado and flooding been associated with the storm, a large segment of the population would have been in great danger. What this study has shown, is that the real problem with the dissemination of severe weather information is not the lack of it, but the inability to transfer it in useful form to an overwhelming majority of the general public.

Mills, C. J.↗

Status of two studies on active control of aeroelastic response at NASA Langley Research Center

The application of active control technology to the suppression of flutter was successfully demonstrated during two recent studies in the Langley transonic dynamics tunnel. The first study involved the implementation of an aerodynamic-energy criterion, using both leading- and trailing-edge controls, to suppress flutter of a simplified delta-wing model. Use of this technique resulted in an increase in the flutter dynamic pressure of approximately 12 percent for this model at a Mach number of 0.9. Analytical methods used to predict the open- and closed-loop behavior of the model are also discussed. The second study, which is a joint effort with the Air Force Flight Dynamics Laboratory, was conducted to establish the effect of active flutter suppression on a model of the Boeing B-52 Configured Vehicle (CCV). Some preliminary results of this study indicate significant improvements in the damping associated with the critical flutter mode.

Abel, I.↗

Civil helicopter noise assessment study Boeing-Vertol model 347

A study was conducted to forecast the noise restrictions which may be imposed on civil transport helicopters in the 1975-1985 time period. Certification and community acceptance criteria were predicted. A 50 passenger tandem rotor helicopter based on the Boeing-Vertol Model 347 was studied to determine the noise reductions required, and the means of achieving them. Some of the important study recommendations are: (1) certification limits should be equivalent to 95 EPNdb at data points located at 500 feet to each side of the touchdown/takeoff point, and 1000 feet from this point directly under the approach and departure flight path. (2) community acceptance should be measured as Equivalent Noise Level (Leq), based on dBA, with separate limits for day and night operations, and (3) in order to comply with the above guidelines, the Model 347 helicopter will require studies and tests leading to several modifications.

Hinterkeuser, E. G.↗

Study on Spacelab software development and integration concepts

A study was conducted to define the complexity and magnitude of the Spacelab software challenge. The study was based on current Spacelab program concepts, anticipated flight schedules, and ground operation plans. The study was primarily directed toward identifying and solving problems related to the experiment flight application and tests and checkout software executing in the Spacelab onboard command and data management subsystem (CDMS) computers and electrical ground support equipment (EGSE). The study provides a conceptual base from which it is possible to proceed into the development phase of the Software Test and Integration Laboratory (STIL) and establishes guidelines for the definition of standards which will ensure that the total Spacelab software is understood prior to entering development.

Source record↗

Parametric study of STOL short-haul engine cycles and operational techniques to minimize community noise impact

The effect of aircraft operational techniques in the terminal area on community noise impact of future short-haul aircraft was investigated. These operational techniques affected altitude, flap retraction rate, thrust cutback altitude, amount of thrust cutback, and amount of turning. During landing the parameters varied were glide slope angle, change in slope angle (two segment approach), and flap extension rate. One mechanical-flap (MF) aircraft and one externally-blown-flap (EBF) aircraft were used to study by noise impact at four U.S. airports, Hanscom Field (Boston); Washington National; Midway (Chicago); and Orange County (California). With the exception of Washington National (DCA), the study showed that a reduction of approximately 40 percent in the number of people highly annoyed (as defined in the study) can be obtained by using these operational techniques. At DCA the number of people highly annoyed using the standard procedure was quite low, but it is significant that the minimumimpact case for Runway 36 reduced the number of people highly annoyed to zero using a power cutback and a turning departure path. The evaluation procedures and methodology developed in this study represents an advance in acoustical state-of-the-art and should provide an effective and useful tool for determining aircraft noise impact upon the airport community.

Source record↗

Studies on disease transmission in spacecraft environments

The effects of the Skylab gas mixtures on general health and immunocompetence of mice and ferrets subjected to the Skylab space cabin environment (SCE) were initially studied in a stainless steel low pressure facility which was maintained at gas ratios of 30% nitrogen and 70% oxygen under 5 psia, and which consisted of two subchambers, that permitted mutual isolation of experimental groups and/or selective removal of animals without return of the entire cabin to ambient pressure was developed. The studies demonstrated that ferrets immunized with Brucella Strain 19 prior to being housed in SCE had decreased synthesis of IgG compared to their respective controls. The possibility of latent infections being responsible for stress-induced upper respiratory diseases of astronauts required that the role of neutralizing antibody as a function of antibody affinity/avidity be investigated. The model consisted of Aleutian disease virus (ADV) which infects ferrets and mink resulting in nonneutralized immune complexes. These studies demonstrated that early antibody to ADV had lower affinity/avidity than late antibody with respect to chronicity. These studies culminated in a description of antibody affinity, first isolation of ADV and its cultivation in vitro.

Kenyon, A. J.↗

Feasibility Study of a Satellite Solar Power Station

A feasibility study of a satellite solar power station (SSPS) was conducted to: (1) explore how an SSPS could be flown and controlled in orbit; (2) determine the techniques needed to avoid radio frequency interference (RFI); and (3) determine the key environmental, technological, and economic issues involved. Structural and dynamic analyses of the SSPS structure were performed, and deflections and internal member loads were determined. Desirable material characteristics were assessed and technology developments identified. Flight control performance of the SSPS baseline design was evaluated and parametric sizing studies were performed. The study of RFI avoidance techniques covered (1) optimization of the microwave transmission system; (2) device design and expected RFI; and (3) SSPS RFI effects. The identification of key issues involved (1) microwave generation, transmissions, and rectification and solar energy conversion; (2) environmental-ecological impact and biological effects; and (3) economic issues, i.e., costs and benefits associated with the SSPS. The feasibility of the SSPS based on the parameters of the study was established.

Glaser, P. E.↗

Engine/airframe compatibility studies for supersonic cruise aircraft

Engine/airframe compatibilities are studied utilizing the advanced supersonic transport point design as the baseline for comparison. Detailed studies of four engines are given. The technical analysis, configuration descriptions, and study results are presented for each of the four specific engines studied.

Source record↗