Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Spacecraft power”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Power processing system for a 200 watt communication satellite transmitter

A power processing system (PPS) for a communication satellite, high power (200W RF) multi-stage depressed collector, 12 GHz, traveling wave tube, is described. The PPS converts spacecraft bus power at a nominal voltage of 76 Vdc to the levels necessary for operating a ten-collector coupled cavity TWT requiring approximately 500 watts of input power. Regulated voltages of up to -11.3K Vdc are provided along with command, protection and telemetry signal conditioning circuits. Power processor interface requirements are set forth and a block diagram illustrating the basic approach utilized is presented. Overall performance, design characteristics and unique features are discussed. Thermal and mechanical interface requirements impacting on PPS design are described as well as the thermal control technique utilized for the overall PPS/TWT assembly.

Farber, B. F.↗
NASA NTRS2018

Cassini Power During the 20 Year Mission and Until the Final Plunge into Saturn

The NASA-ESA Cassini mission ended on September 15, 2017, after almost 20 years of operations. Electrical power telemetry data is presented for the entire mission from launch and End Of Mission (EOM). The Cassini spacecraft was powered by three Radioisotope Thermoelectric Generators (RTGs) connected in parallel. These three RTGs generated 882.1 W at the beginning of the mission. At EOM, the power level was 600.3 W. The electrical output of Cassini’s power subsystem decayed consistently, as predicted, during the entire mission between October 1997 and September 2017. Further, no heating of the RTGs was reported in telemetry during the last minutes of the mission, nor was there any variance apparent in the final output of the three RTGs that is attributable to the final plunge into Saturn.

Burk, Thomas A.↗
NASA NTRS1971

Experiments D001, D002, and D006: Basic object, nearby object, and surface photography

On the Gemini 5 mission, acquisition and tracking was performed by the use of celestial bodies as aiming points. However, distant photography of the REP was not possible because of spacecraft electrical power difficulties which occurred after REP ejection. Terrestrial photography was accomplished within the limitations imposed by weather conditions and spacecraft electrical and thruster problems. The photographs that were obtained were significant only as an element of the data to be used in technique evaluation. The other data were time-correlated position and pointing information, atmospheric conditions, sun angle, exposure settings, and the flight logs and verbal comments of the crewmembers. The photographs shown are representative of those that facilitated evaluation of the acquisition and tracking techniques that were used in these three experiments.

Geltmacher, H. E.↗
NASA NTRS1981

Modifications to CTVS TV cameras for space shuttle compatibility and evaluation

Five all solid state cockpit television system (CTVS) cameras, built to USAF requirements for high performance type F-16 aircraft, were modified and tested for possible use in the closed circuit television system on the space shuttle orbiter. The 400 HZ power supply in the electronics unit assembly was replaced with two DC/DC converters to enable operation from 28VDC spacecraft-type power sources. Nonessential circuit functions were deleted to minimize input power requirements. The normal 31 mm focal length lense assemblies were replaced with wider field-of-view 19 mm focal length lenses. Base plates for and housings were redesigned to facilitate mounting and heat-sinking of the camera in the space environment and short length (14") adapter cables were designed, fabricated, and tested to meet requirements for cameras configured to mount on the astronauts helmet/visor assembly. Technical requirements, design implementation, environmental tests, Modifications prodedures, and reliability/quality efforts are discussed. Schematics are included.

Hoagland, K.↗
NASA NTRS1964

Power supplies.

Power supplies for spacecraft including static and dynamic solar systems, batteries, fuel cells and nuclear systems

SOLAR POWER SOURCE↗
NASA NTRS1989

Magellan Prelaunch Mission Operations Report

The Magellan spacecraft will be launched from Kennedy Space Center (KSC) within a 31-day overall launch period extending from April 28 to May 28, 1989. The launch will use the Shuttle Orbiter Atlantis to lift an Inertial Upper Stage (IUS) and the Magellan Spacecraft into low Earth orbit. After the Shuttle achieves its parking orbit, the IUS and attached Magellan spacecraft are deployed from the payload bay. After a short coast time, the two-stage IUS is fired to inject the Magellan spacecraft into an Earth-Venus transfer trajectory. The Magellan spacecraft is powered by single degree of freedom, sun-tracking, solar panels charging a set of nickel-cadmium batteries. The spacecraft is three-axis stabilized by reaction wheels using gyros and a star sensor for attitude reference. The spacecraft carries a solid rocket motor for Venus Orbit Insertion (VOI). A hydrazine propulsion system allows trajectory correction and prevents saturation of the reaction wheels. Communication with Earth through the Deep Space Network (DSN) is provided by S- and X-band telemetry channels, through alternatively a low, medium, or 3.7 m high-gain parabolic antenna rigidly attached to the spacecraft. The high-gain antenna also serves as the radar and radiometer antenna during orbit around Venus.

Source record↗
NASA NTRS1983

Development of a rotary power transformer and inverter drive for spacecraft

Many future satellites and spacecraft with spun and despun configurations will require the transfer of power across rotating interfaces in lieu of slip-rings and/or flexures. This is particularly true of spacecraft that have to demonstrate a long life expectancy. The rotary transformer has the desirable characteristics of high reliability and low noise, which qualify it as a potential replacement for slip rings. Development of a rotary power transformer follows the successful completion of a task to develop rotary signal-level transformers for the Galileo Spacecraft Project. The physical configuration of a rotary power transformer has a significant effect on its magnetic and electrical characteristics and therefore impacts the design of the dc/ac inverter driver. Important characteristics addressed during this development effort include: operating frequency, efficiency, transformer gap size, leakage inductance, and leakage flux. A breadboard inverter and rotary transformer were designed, fabricated and tested.

Mclyman, W. T.↗