Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solvent Free”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Corrosion of Commercial Mg–Al Alloys: AZ31B, AM60, and AZ91D

Aqueous corrosion, atmospheric corrosion, and ionic liquid dissolution studies were performed on commercial alloys AZ31B, AM60, and AZ91D and compared with previously reported results for single-phase binary Mg–Al alloys containing similar Al concentrations (αMg-2 at% Al, αMg-5 at% Al, and Mg-8 at% Al). Polarization studies in 0.6 M NaCl were used to characterize the aqueous free corrosion behavior during 20-h free immersion. Accelerated corrosion testing was performed using a rotating-disk electrode which revealed the evolution of an Al-rich mud-cracking and platelet morphology. Atmospheric droplet testing showed rapid pH increases that depended on the Al concentration in the alloy. Time-dependent contact angle measurements showed that the degree of droplet wetting increased during free corrosion by ~50° over 20 h in 0.6 M NaCl. Ionic liquid dissolution studies in 1:2 M choline chloride:urea deep eutectic solvent were performed in order to examine the current-voltage behavior of these alloys in the absence of water and hydrogen reduction. The results of these studies revealed the formation of nanowire corrosion morphologies within a honeycomb lattice structure which we attribute to selective dissolution of Mg via a two-dimensional stepflow process

25 ENERGY STORAGE↗
DOE OSTI2021

Efficient Free Triplet Generation Follows Singlet Fission in Diketopyrrolopyrrole Polymorphs with Goldilocks Coupling

Microcrystal electron diffraction, grazing incidence wide-angle scattering, and UV–vis spectroscopy were used to determine the unit-cell structure and the relative composition of dimethylated diketopyrrolopyrrole H- and J-polymorphs within thin films subjected to vapor solvent annealing (VSA) for different times. The electronic structure and excited-state deactivation pathways of the different polymorphs were examined by transient absorption spectroscopy, conductive probe atomic force microscopy, and molecular modeling. We find that VSA initially converts amorphous films into mixtures of H- and J-polymorphs and promotes further conversion from H to J with longer VSA times. Here, though both polymorphs exhibit efficient SF to form coupled triplets, free triplet yields are higher in J-polymorph films compared to mixed films because coupling in J-aggregates is lower and, in turn, more favorable for triplet decoupling.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The efficacy of Lewis affinity scale metrics to represent solvent interactions with reagent salts in all-inorganic metal halide perovskite solutions

Solvents employed in the solution processing of metal halide perovskites are known to play a key role in defining the morphology and properties of the resulting thin film, and thus the performance of perovskite solar cell devices. Accurate metrics are needed that are capable of differentiating among candidates, finding solvents that adequately solubilize the various precursor species in solution and facilitate the nucleation and growth of these materials. Existing metrics such as the unsaturated Mayer bond order (UMBO) and the Gutmann donor number (DN) have been tested for lead iodide perovskite systems; but there has yet to be a comprehensive study on their transferability to lead-free perovskite solutions. Here, we use ab initio methods (density functional theory) and regression analysis tools to study the usefulness of DN and BF 3 affinity scales in this regard. We compared the relative effectiveness of these scales to describe interactions between solvents and BXn perovskite salts of lead (Pb 2+ ), tin (Sn 2+ and Sn 4+ ), germanium (Ge 2+ ), bismuth (Bi 3+ ), and antimony (Sb 3+ and Sb 5+ ). The DN proved to be a better representation than the BF 3 of such interactions, reflecting the closer similarity of these species to the “parent” SbCl 5 Lewis acid than to BF 3 . In addition, we have uncovered the usefulness of the lithium cation affinity metric (LCA) to describe the strength of interactions between solvents and A-site cations (e.g. Na + , K + , Rb + and Cs + ) in all-inorganic metal halide perovskite solutions. We find that the coordination strengths of solvents towards species in all-inorganic metal halide perovskite solutions are best described by two different metrics with distinct modes of action: DN differentiates among BX n salt complexes, and LCA among A-site cation species. This revelation can help guide the choice of solvent to optimize processing conditions. It also emphasizes the importance of selecting solvents whose DN and LCA optimize coordination to key Lewis acid species in all-inorganic perovskite solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2013

Vapor condensation onto a non-volatile liquid drop

Molecular dynamics simulations of miscible and partially miscible binary Lennard–Jones mixtures are used to study the dynamics and thermodynamics of vapor condensation onto a non-volatile liquid drop in the canonical ensemble. When the system volume is large, the driving force for condensation is low and only a submonolayer of the solvent is adsorbed onto the liquid drop. A small degree of mixing of the solvent phase into the core of the particles occurs for the miscible system. At smaller volumes, complete film formation is observed and the dynamics of film growth are dominated by cluster-cluster coalescence. Mixing into the core of the droplet is also observed for partially miscible systems below an onset volume suggesting the presence of a solubility transition. We also develop a non-volatile liquid drop model, based on the capillarity approximations, that exhibits a solubility transition between small and large drops for partially miscible mixtures and has a hysteresis loop similar to the one observed in the deliquescence of small soluble salt particles. The properties of the model are compared to our simulation results and the model is used to study the formulation of classical nucleation theory for systems with low free energy barriers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

A Localized High-Concentration Electrolyte with Optimized Solvents and Lithium Difluoro(oxalate)borate Additive for Stable Lithium Metal Batteries

Lithium (Li) metal is considered as the ideal anode for high energy density rechargeable Li metal batteries (LMBs). However, the morphology instability of Li anode during electrochemical deposition/stripping leads to the uncontrolled growth of dendrites and the solid electrolyte interphase (SEI) layer which causes low Li Coulombic efficiency (CE) and rapid capacity fading in LMBs. Here, we report a carbonate-based localized high concentration electrolyte (LHCE) with a fluorinated ether as a diluent for 4-V class LMBs. This electrolyte consists of 1.2 M lithium bis(fluorosulfonyl)imide (LiFSI) in a co-solvent mixture of ethylene carbonate (EC)/ethyl methyl carbonate (EMC) with bis(2,2,2-trifluoroethyl) ether (BTFE) as diluent and 0.15 M lithium difluoro(oxalate)borate (LiDFOB) as additive. Using this electrolyte, dendrites-free Li deposition with a high Li CE (~98.5 %) is achieved. In addition, it offers much improved cycling stability of Li metal anode compared to previously reported dimethyl carbonate-based LHCEs. For example, a Li||NMC333 battery with a high areal loading of 3.8 mAh cm-2 maintains 84% of its initial capacity after 100 cycles. This is likely due to the highly robust SEI layer formed on the Li metal anode because of the decomposition of LiDFOB salt and EC solvent molecules. Therefore this novel electrolyte is promising for high energy density rechargeable LMBs.

lithium, lithium metal batteries, cycling stabilit↗
DOE OSTI2015

A Priori Estimation of Organic Reaction Yields

Abstract A thermodynamically guided calculation of free energies of substrate and product molecules allows for the estimation of the yields of organic reactions. The non‐ideality of the system and the solvent effects are taken into account through the activity coefficients calculated at the molecular level by perturbed‐chain statistical associating fluid theory (PC‐SAFT). The model is iteratively trained using a diverse set of reactions with yields that have been reported previously. This trained model can then estimate a priori the yields of reactions not included in the training set with an accuracy of ca. ±15 %. This ability has the potential to translate into significant economic savings through the selection and then execution of only those reactions that can proceed in good yields.

Emami, Fateme S.↗
DOE OSTI2019

Conformational Equilibria of Multimodal Chromatography Ligands in Water and Bound to Protein Surfaces

Multimodal chromatography uses small ligands with multiple modes of interaction, e.g., charged, hydrophobic or hydrogen bonding, to separate proteins from complex mixtures. The mechanism by which multimodal ligands interact with proteins is expected to be affected by ligand conformations, among other factors. In this report, we determine conformational equilibria of two commercially used multimodal cation exchange ligands, Capto MMC and Nuvia cPrime, in a range of solvents, a Lennard-Jones (LJ) liquid, ethanol, and water, using molecular dynamics (MD) simulations. By mapping ligand conformations onto two key torsion angles, ω and φ, in these solvents and in low and high dielectric media, we quantify the relative importance of intramolecular and solvent-mediated interactions. In a high dielectric medium, Capto MMC preferentially samples three conformations, which are stabilized by a combination of an intramolecular torsion potential (on ω) and LJ interactions. In an LJ liquid, solvent molecules compete with intramolecular interactions while simultaneously providing an osmotic force, stabilizing both closer and farther distances between ligand sites. This has the overall result of “flattening out” the conformational landscape. Interestingly, in ethanol and water, hydrogen bonding among the amide hydrogen and solvent molecules stabilizes two additional conformations of Capto MMC in which ω takes on less favorable cis-like configurations. MD simulations of ligands in free solution with three therapeutic antibody fragments show that ligand conformational equilibria remain effectively unchanged upon binding to proteins. Although, there is 20–30% dehydration of the overall ligand upon binding, the hydrogen-bonding sites are dehydrated to a much smaller extent, particularly in cis-like configurations. Conformational preferences of Nuvia cPrime are similar to that of Capto MMC, except for the effect of symmetry arising from the absence of an alkyl thiol tail. Characterizing the conformational equilibria of these two ligands in free solution and bound to a protein provides a foundation for developing a mechanistic understanding of protein–multimodal ligand interactions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Prediction of hydration energies of adsorbates at Pt(111) and liquid water interfaces using machine learning

Aqueous phase heterogeneous catalysis is important to various industrial processes, including biomass conversion, Fischer–Tropsch synthesis, and electrocatalysis. Accurate calculation of solvation thermodynamic properties is essential for modeling the performance of catalysts for these processes. Explicit solvation methods employing multiscale modeling, e.g., involving density functional theory and molecular dynamics have emerged for this purpose. Although accurate, these methods are computationally intensive. This study introduces machine learning (ML) models to predict solvation thermodynamics for adsorbates on a Pt(111) surface, aiming to enhance computational efficiency without compromising accuracy. In particular, ML models are developed using a combination of molecular descriptors and fingerprints and trained on previously published water–adsorbate interaction energies, energies of solvation, and free energies of solvation of adsorbates bound to Pt(111). These models achieve root mean square error values of 0.09 eV for interaction energies, 0.04 eV for energies of solvation, and 0.06 eV for free energies of solvation, demonstrating accuracy within the standard error of multiscale modeling. Feature importance analysis reveals that hydrogen bonding, van der Waals interactions, and solvent density, together with the properties of the adsorbate, are critical factors influencing solvation thermodynamics. Furthermore, these findings suggest that ML models can provide rapid and reliable predictions of solvation properties. This approach not only reduces computational costs but also offers insights into the solvation characteristics of adsorbates at Pt(111)–water interfaces.

Adsorption↗
NASA NTRS1998

Effect of Bearing Cleaning on Long Term Bearing Life

For many years chlorofluorocarbon (CFC ) based solvents, such as Freon and 1,1,1, Trichloroethane (TCA), were used as bearing cleaning solvents for space mechanisms. The 1995 ban on the production of ozone depleting chemicals (ODC) such as CFCs caused a change to new ODC-free cleaners for the precision bearing cleaning. With this change the question arises what effect if any do these new cleaners have on long term bearing life. The purpose of this study was to evaluate this effect. A one year test using 60 small electrical motors (two bearings per motor) was conducted in a high vacuum environment (2.0* 10(exp -6) torr) at a temperature of 90C. Prior to testing the bearings were cleaned with one of four cleaners. These cleaners included two aqueous based cleaners, a CFC based cleaner and supercritical carbon dioxide. Three space compatible greases were tested. After testing the mass of each lubricated bearing was measured both pre and post test. Along with mass loss measurements a profilometer trace of each bearing was taken to measure post test wear of the bearings. In addition the bearings were visually examined and analyzed using an optical microscope.

Jett, Timothy Raymond↗
DOE OSTI2024

Vacancy-mediated transport and segregation tendencies of solutes in FCC Ni under diffusional creep

Nickel-based alloys are known for their excellent corrosion resistance and high-temperature strength. However, at high temperatures, polycrystals experience grain boundary-stress-driven vacancy diffusion leading to diffusion-driven creep. Understanding the fundamentals of defect migration is essential to predict diffusion creep behavior. In this talk, we explore the Nabarro-Herring diffusion creep and the associated solute segregation that is likely to result from the different diffusivities of the solute and solvent elements. Density functional theory calculations are performed to determine the formation, migration and binding energies of the solute and vacancy defects in stress-free and stressed states. The dilute-limit transport coefficients are then calculated using the self-consistent mean field theory as implemented in the Kinetic Cluster Expansion (KineCluE) code. Predictions of diffusion creep strain rates and solute segregation are then presented for various solutes, stress and temperatures. This work opens research avenues for exploration of diffusion creep via characterization of elemental segregation to grain boundaries.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Integrated linker-regulation and ring-fusion engineering for efficient additive-free non-fullerene organic solar cells

The rational molecular design and structural modification of quasi-two-dimensional fused perylene diimide (quasi-2D FPDI) acceptors have received growing attention for application in non-fullerene organic solar cells (NF-OSCs). Herein, we designed and synthesized two pairs of FPDI acceptors, one in the form of FPDI–π-bridge–FPDI with the π-bridge being either an axisymmetric thiophene (T) or a centrosymmetric thienothiophene (TT) unit, and the other being the corresponding ring-fusion counterpart. Additionally, four small molecule acceptors, namely T-FPDI, TT-FPDI, FT-FPDI and FTT-FPDI, were paired with a common PTB7-Th polymeric electron donor as active materials for a comparative study of the effects of linkers and ring fusion on their photovoltaic performances. The T-FPDI-based NF-OSC exhibited a decent power conversion efficiency (PCE) of 5.50%, while a higher PCE of 7.17% with a simultaneous enhancement in the open circuit voltage ( V oc ), the short-circuit current density ( J sc ) and the fill factor (FF) was achieved for the TT-FPDI-based solar cells. The solar cells based on the ring-fused FT-FPDI and FTT-FPDI acceptors displayed PCEs of 6.75% and 7.66%, respectively, both higher than those of the corresponding non-fused counterparts. Notably, the trade-off between the J sc and V oc , commonly observed in fullerene OSCs, is alleviated in these systems. It is also worth noting that the NF-OSCs based on these FPDI acceptors do not need any solvent additives. Overall, this successful molecular engineering based on novel quasi-2D FPDI building blocks may inspire the development of emergent electron acceptors for high performance additive-free NF-OSCs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Grape pomace compost harbors organohalide-respiring Dehalogenimonas species with novel reductive dehalogenase genes

Here, organohalide-respiring bacteria play key roles in the natural chlorine cycle; however, most of the current knowledge is based on cultures from contaminated environments. We demonstrate that grape pomace compost without prior exposure to chlorinated solvents harbors a Dehalogenimonas ( Dhgm ) species capable of using chlorinated ethenes, including the human carcinogen and common groundwater pollutant vinyl chloride (VC) as electron acceptors. Grape pomace microcosms and derived solid-free enrichment cultures were able to dechlorinate trichloroethene (TCE) to less chlorinated daughter products including ethene. 16S rRNA gene amplicon and qPCR analyses revealed the predominance of Dhgm sequences, but no Dehalococcoides mccartyi ( Dhc ) biomarker genes were detected. The enumeration of Dhgm 16S rRNA genes demonstrated VC-dependent growth, and 6.55 ± 0.64 x 10 8 cells were produced per µmole of chloride released. Metagenome sequencing enabled the assembly of a Dhgm draft genome, and 52 putative reductive dehalogenase (RDase) genes were identified. Proteomic workflows identified a putative VC RDase with 49% and 56.1% amino acid similarity to the known VC RDases VcrA and BvcA, respectively. A survey of 1,173 groundwater samples collected from 111 chlorinated solvent-contaminated sites revealed that Dhgm 16S rRNA genes were frequently detected and outnumbered Dhc in 65% of the samples. Dhgm may be more relevant contributors to chlorinated solvent reductive dechlorination in contaminated aquifers than is currently recognized, and non-polluted environments are a source of strictly organohalide-respiring bacteria with novel RDase genes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2015

Comparison of the Marcus and Pekar partitions in the context of non-equilibrium, polarizable-continuum solvation models

The Marcus and Pekar partitions are common, alternative models to describe the non-equilibrium dielectric polarization response that accompanies instantaneous perturbation of a solute embedded in a dielectric continuum. Examples of such a perturbation include vertical electronic excitation and vertical ionization of a solution-phase molecule. Here, we provide a general derivation of the accompanying polarization response, for a quantum-mechanical solute described within the framework of a polarizable continuum model (PCM) of electrostatic solvation. Although the non-equilibrium free energy is formally equivalent within the two partitions, albeit partitioned differently into “fast” versus “slow” polarization contributions, discretization of the PCM integral equations fails to preserve certain symmetries contained in these equations (except in the case of the conductor-like models or when the solute cavity is spherical), leading to alternative, non-equivalent matrix equations. Unlike the total equilibrium solvation energy, however, which can differ dramatically between different formulations, we demonstrate that the equivalence of the Marcus and Pekar partitions for the non-equilibrium solvation correction is preserved to high accuracy. Differences in vertical excitation and ionization energies are <0.2 eV (and often <0.01 eV), even for systems specifically selected to afford a large polarization response. Numerical results therefore support the interchangeability of the Marcus and Pekar partitions, but also caution against relying too much on the fast PCM charges for interpretive value, as these charges differ greatly between the two partitions, especially in polar solvents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Electrostatics of proteins in dielectric solvent continua. I. An accurate and efficient reaction field description

We present a reaction field (RF) method which accurately solves the Poisson equation for proteins embedded in dielectric solvent continua at a computational effort comparable to that of an electrostatics calculation with polarizable molecular mechanics (MM) force fields. The method combines an approach originally suggested by Egwolf and Tavan [J. Chem. Phys. 118, 2039 (2003)] with concepts generalizing the Born solution [Z. Phys. 1, 45 (1920)] for a solvated ion. First, we derive an exact representation according to which the sources of the RF potential and energy are inducible atomic anti-polarization densities and atomic shielding charge distributions. Modeling these atomic densities by Gaussians leads to an approximate representation. Here, the strengths of the Gaussian shielding charge distributions are directly given in terms of the static partial charges as defined, e.g., by standard MM force fields for the various atom types, whereas the strengths of the Gaussian anti-polarization densities are calculated by a self-consistency iteration. The atomic volumes are also described by Gaussians. To account for covalently overlapping atoms, their effective volumes are calculated by another self-consistency procedure, which guarantees that the dielectric function ε(r) is close to one everywhere inside the protein. The Gaussian widths σ{sub i} of the atoms i are parameters of the RF approximation. The remarkable accuracy of the method is demonstrated by comparison with Kirkwood's analytical solution for a spherical protein [J. Chem. Phys. 2, 351 (1934)] and with computationally expensive grid-based numerical solutions for simple model systems in dielectric continua including a di-peptide (Ac-Ala-NHMe) as modeled by a standard MM force field. The latter example shows how weakly the RF conformational free energy landscape depends on the parameters σ{sub i}. A summarizing discussion highlights the achievements of the new theory and of its approximate solution particularly by comparison with so-called generalized Born methods. A follow-up paper describes how the method enables Hamiltonian, efficient, and accurate MM molecular dynamics simulations of proteins in dielectric solvent continua.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2013

Cluster-continuum quantum mechanical models to guide the choice of anions for Li{sup +}-conducting ionomers

A quantum-mechanical investigation on Li poly(ethylene oxide)-based ionomers was performed in the cluster-continuum solvation model (CCM) that includes specific solvation in the first shell surrounding the cation, all surrounded by a polarizable continuum. A four-state model, including a free Li cation, Li{sup +}-anion pair, triple ion, and quadrupole was used to represent the states of Li{sup +} within the ionomer in the CCM. The relative energy of each state was calculated for Li{sup +} with various anions, with dimethyl ether representing the ether oxygen solvation. The population distribution of Li{sup +} ions among states was estimated by applying Boltzmann statistics to the CCM energies. Entropy difference estimates are needed for populations to better match the true ionomer system. The total entropy change is considered to consist of four contributions: translational, rotational, electrostatic, and solvent immobilization entropies. The population of ion states is reported as a function of Bjerrum length divided by ion-pair separation with/without entropy considered to investigate the transition between states. Predicted concentrations of Li{sup +}-conducting states (free Li{sup +} and positive triple ions) are compared among a series of anions to indicate favorable features for design of an optimal Li{sup +}-conducting ionomer; the perfluorotetraphenylborate anion maximizes the conducting positive triple ion population among the series of anions considered.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Enabling aqueous processing for crack-free thick electrodes

Aqueous processing of thick electrodes for Li-ion cells promises to increase energy density due to increased volume fraction of active materials, and to reduce cost due to the elimination of the toxic solvents. Here in this paper this work reports the processing and characterization of aqueous processed electrodes with high areal loading and associated full pouch cell performance. Cracking of the electrode coatings becomes a critical issue for aqueous processing of the positive electrode as areal loading increases above 20–25 mg/cm 2 (~4 mAh/cm 2 ). Crack initiation and propagation, which was observed during drying via optical microscopy, is related to the build-up of capillary pressure during the drying process. The surface tension of water was reduced by the addition of isopropyl alcohol (IPA), which led to improved wettability and decreased capillary pressure during drying. The critical thickness (areal loading) without cracking increased gradually with increasing IPA content. The electrochemical performance was evaluated in pouch cells. Electrodes processed with water/IPA (80/20 wt%) mixture exhibited good structural integrity with good rate performance and cycling performance.

25 ENERGY STORAGE↗
DOE OSTI2023

High‐Performance Lithium Metal Batteries Enabled by a Fluorinated Cyclic Ether with a Low Reduction Potential

Abstract Electrolyte engineering is crucial for developing high‐performance lithium metal batteries (LMB). Here, we synthesized two cosolvents methyl bis(fluorosulfonyl)imide (MFSI) and 3,3,4,4‐tetrafluorotetrahydrofuran (TFF) with significantly different reduction potentials and add them into LiFSI‐DME electrolytes. The LiFSI/TFF‐DME electrolyte gave an average Li Coulombic efficiency (CE) of 99.41 % over 200 cycles, while the average Li CEs for MFSI‐based electrolyte is only 98.62 %. Additionally, the TFF‐based electrolytes exhibited a more reversible performance than the state‐of‐the‐art fluorinated 1,4‐dimethoxylbutane electrolyte in both Li||Cu half‐cell and anode‐free Cu||LiNi 0.8 Mn 0.1 Co 0.1 O 2 full cell. More importantly, the decomposition product from bis(fluorosulfonyl)imide anion could react with ether solvent, which destroyed the SEI, thus decreasing cell performance. These key discoveries provide new insights into the rational design of electrolyte solvents and cosolvents for LMB.

Wu, Min↗