Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Single Crystal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Phase equilibria in the quasi-ternary system Ag{sub 2}Se–Ga{sub 2}Se{sub 3}–In{sub 2}Se{sub 3} and physical properties of (Ga{sub 0.6}In{sub 0.4}){sub 2}Se{sub 3}, (Ga{sub 0.594}In{sub 0.396}Er{sub 0.01}){sub 2}Se{sub 3} single crystals

The quasi-ternary system Ag{sub 2}Se–Ga{sub 2}Se{sub 3}–In{sub 2}Se{sub 3} was investigated by differential thermal, X-ray phase, X-ray structure, microstructure analysis and microhardness measurements. Five quasi-binary phase diagrams, six polythermal sections, isothermal section at 820 K and the liquidus surface projection were constructed. The character and temperature of the invariant processes were determined. The specific resistance of the single crystals (Ga{sub 0.6}In{sub 0.4}){sub 2}Se{sub 3}, (Ga{sub 0.594}In{sub 0.396}Er{sub 0.01}){sub 2}Se{sub 3} was measured, 7.5×10{sup 5} and 3.15×10{sup 5} Ω m, respectively, optical absorption spectra in the 600–1050 nm range were recorded at room temperature, and the band gap energy was estimated which is 1.95±0. 01 eV for both samples. - Graphical abstract: The article reports for the first time the investigated liquidus surface projection of the Ag{sub 2}Se–Ga{sub 2}Se{sub 3}–In{sub 2}Se{sub 3} system and isothermal section at 820 K of the system. Five phase diagrams, six polythermal sections, isothermal section at 820 K and the liquidus surface projection were built at the first time. The existence of the large region of the solid solutions based on AgIn{sub 5}Se{sub 8}, Ga{sub 2}Se{sub 3} and AgGa{sub 1−x}In{sub x}Se{sub 2} was investigated. The existence of two ternary phases was established in the Ga{sub 2}Se{sub 3}–In{sub 2}Se{sub 3} system. Two single crystals (Ga{sub 0.6}In{sub 0.4}){sub 2}Se{sub 3}, (Ga{sub 0.594}In{sub 0.396}Er{sub 0.01}){sub 2}Se{sub 3} were grown and some of optical properties of them were studied at first time. Display Omitted - Highlights: • Liquidus surface projection was built for Ag{sub 2}Se–Ga{sub 2}Se{sub 3}–In{sub 2}Se{sub 3} system. • Solid solution ranges of AgIn{sub 5}Se{sub 8}, Ga{sub 2}Se{sub 3} and AgGa{sub 1−x}In{sub x}Se{sub 2} were investigated. • Two single crystals (Ga{sub 0.6}In{sub 0.4}){sub 2}Se{sub 3}, (Ga{sub 0.594}In{sub 0.396}Er{sub 0.01}){sub 2}Se{sub 3} were grown. • Some optical properties of these single crystals were studied.

36 MATERIALS SCIENCE↗

Magnetic properties of Co{sub 2}{sup 2+}Co{sub 1−} {sub x}{sup 3+}Fe{sub x}{sup 3+}BO{sub 5} (x = 0.10) single crystals with a ludwigite structure

The investigation of mixed Co–Fe ludwigite single crystals shows that their magnetic properties are close to the magnetic properties of Fe{sub 3}BO{sub 5} despite the predominance of cobalt ions. The magnetic properties of Co{sub 3–} {sub x}Fe{sub x}BO{sub 5} single crystals with x = 0.10 are studied in detail. Magnetometric measurements demonstrate a strong magnetic anisotropy with easy magnetization axis b, and the orbital magnetic moment of cobalt is in a frozen state. The detected temperature dependence of the absorption of Mössbauer spectra allowed us to determine the magnetic ordering temperature, which agrees with the results of magnetization measurements (T{sub C} = 84 K).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Bulk single crystal growth and sample surface preparation of catalytic NaAu 2

Here in we have grown bulk single crystals of NaAu 2 for the first time to enable surface studies on the nature of the (111) bulk surface. This intermetallic compound exhibits surprisingly high catalytic activity for CO oxidation, a benchmark reaction. Theory predicts NaAu 2 to be the most thermodynamically stable composition in the Na-Au binary phase diagram and NaAu 2 has been seen to preferentially form in experiments containing Na and Au which supports this prediction. The (111) surface was also predicted to be the most stable and is nearly bulk-terminated making single crystal samples prepared with this crystallographic orientation a fitting choice. As a result, the crystal quality and surface composition of the metallographically prepared surface was determined by x-ray diffraction methods in addition to optical and electron microscopy.

(111) catalytic surface↗

Increase in the Fluorine-Ion Conductivity of Single Crystals of Tysonite-type CeF{sub 3} Superionic Conductor by Substituting Polarized Cd{sup 2+} Ions for Ce{sup 3+} Ions

The fluorine-ion conductivity of single crystals with a tysonite (LaF{sub 3}) structure with heterovalent isomorphic substitutions of highly polarizable Cd{sup 2+} cations with a 18-electron shell for rare earth ions Ce{sup 3+} have been studied for the first time. Ce{sub 0.995}Cd{sub 0.005}F{sub 2.995} single crystals have been grown from melt by the Bridgman technique in a fluorinating atmosphere. The fluorine-ion conductivity of single crystal is measured by impedance spectroscopy in the temperature range from 153 to 1073 K, where it increases by a factor of 10{sup 9}, approaching the value σ{sub dc} = 5 × 10{sup –2} S/cm at 1073 K. At T{sub 0} = 450 ± 20 K, the dependence σ{sub dc}(T) is split into two portions with the ion-transport activation enthalpy ΔH{sub σ} = 0.39 ± 0.01 eV (T < T{sub 0}) and ΔH{sub σ} = 0.23 ± 0.02 eV (T > T0). It is found that at T = 293 K the conductivity σ{sub dc} = 3 × 10{sup –5} S/cm of Ce{sub 0.995}Cd{sub 0.005}F{sub 2.995} crystal is higher by a factor of 10 than the conductivity of the tysonite matrix CeF{sub 3} and close to the σ{sub dc} value for Ce{sub 0.995}Sr{sub 0.005}F{sub 2.995} crystal. This finding indicates a significant effect of the substitutions of Cd{sup 2+} ions for Ce{sup 3+} on the σdc value and the advantage of Cd{sup 2+} ions over Ca{sup 2+} and Ba{sup 2+} from the viewpoint of increasing σ{sub dc}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultrafast photovoltaic effects in miscut Nb-doped SrTiO{sub 3} single crystals

Picosecond photovoltaic effect in miscut Nb-doped SrTiO{sub 3} single crystal has been observed under ultraviolet pulsed laser irradiation at ambient temperature without an applied bias. The 10%-90% rise time and the full width at half maximum are 828 and 670 ps, respectively, which is faster than that of exact cut Nb-doped SrTiO{sub 3} single crystal. A model based on terrace structure is put forward to explain the observation.

36 MATERIALS SCIENCE↗

Quantitative experimental determination of the solid solution hardening potential of rhenium, tungsten and molybdenum in single-crystal nickel-based superalloys

Here, the solid-solution hardening potential of the refractory elements rhenium, tungsten and molybdenum in the matrix of single-crystal nickel-based superalloys was experimentally quantified. Single-phase alloys with the composition of the nickel solid-solution matrix of superalloys were cast as single crystals, and tested in creep at 980 °C and 30–75 MPa. The use of single-phase single-crystalline material ensures very clean data because no grain boundary or particle strengthening effects interfere with the solid-solution hardening. This makes it possible to quantify the amount of rhenium, tungsten and molybdenum necessary to reduce the creep rate by a factor of 10. Rhenium is more than two times more effective for matrix strengthening than either tungsten or molybdenum. The existence of rhenium clusters as a possible reason for the strong strengthening effect is excluded as a result of atom probe tomography measurements. If the partitioning coefficient of rhenium, tungsten and molybdenum between the γ matrix and the γ' precipitates is taken into account, the effectiveness of the alloying elements in two-phase superalloys can be calculated and the rhenium effect can be explained.

36 MATERIALS SCIENCE↗

Ligand assisted growth of perovskite single crystals with low defect density

A low defect density in metal halide perovskite single crystals is critical to achieve high performance optoelectronic devices. Here we show the reduction of defect density in perovskite single crystals grown by a ligand-assisted solution process with 3-(decyldimethylammonio)-propane-sulfonate inner salt (DPSI) as an additive. DPSI ligands anchoring with lead ions on perovskite crystal surfaces not only suppress nucleation in solution, but also regulate the addition of proper ions to the growing surface, which greatly enhances the crystal quality. The grown CH 3 NH 3 PbI 3 crystals show better crystallinity and a 23-fold smaller trap density of 7 × 10 10 cm -3 than the optimized control crystals. The enhanced material properties result in significantly suppressed ion migration and superior X-ray detection sensitivity of CH 3 NH 3 PbI 3 detectors of (2.6 ± 0.4) × 10 6 µC Gy -1 air cm -2 for 60 kVp X-ray and the lowest detectable dose rate reaches (5.0 ± 0.7) nGy s -1 , which enables reduced radiation dose to patients in medical X-ray diagnostics.

36 MATERIALS SCIENCE↗

On the Thermal and Vibrational Properties of LaGaO3 Single Crystals

The thermal expansion and vibrational properties of [100] and [001] LaGaO3 single crystals have been studied by Thermal Mechanical Analysis and micro-Raman spectroscopy. A first order orthorhombic to rhombohedral phase transition has been confirmed by both techniques, as well as by in-situ heating using optical microscopy. The appearance of a metastable intermediate phase, tentatively assigned as monoclinic, has been detected both by optical microscopy and Raman spectroscopy upon heating of [100] and [001] LaGaO3 single crystals. Not only temperature but the stress induced orthorhombic to rhombohedral phase transition has also been detected by Raman mapping of the residual impression made by Vickers indentation. The position map of bands belonging to the lower temperature/pressure orthorhombic and the higher temperature/pressure rhombohedral phase show that the rhombohedral phase is located inside the impression, where the applied indentation stresses are the highest, and no rhombohedral phase can be located outside the impression, where the surface has not been altered by the contact stresses

36 MATERIALS SCIENCE↗

Preparation of single-crystal spherical γ-Mo{sub 2}N by temperature-programmed reaction between β-MoO{sub 3} and NH{sub 3}

In the present wok, single-crystalline spherical γ-Mo{sub 2}N powders was successfully prepared by the temperature-programmed reaction of single-crystal spherical β-MoO{sub 3} with NH{sub 3} in the temperature ranges of 1013–1073 K. Herein, the Mo source used was monoclinic system, β-MoO{sub 3}, a metastable phase of MoO{sub 3}. It is found that the characterizations of the as-prepared γ-Mo{sub 2}N powders are strongly depended on the selection of the MoO{sub 3} precursor. In other words, the as-prepared γ-Mo{sub 2}N powders inherited the shape, size and structure of the used β-MoO{sub 3} precursors upon reaction with NH{sub 3}. In order to make a comparison, β-MoO{sub 3} was also reduced by the mixed gases of N{sub 2} and H{sub 2} with the flow rate ratio of 1:3 at the identical conditions. It was found that pure β-Mo{sub 2}N polycrystalline can be obtained when the temperature was 1013 K; while further increasing the reaction temperature, metal Mo powder will be turned up. - Highlights: • Metastable phase β-MoO{sub 3} was used to prepare Mo{sub 2}N via temperature-programmed reaction. • Single-crystal spherical γ-Mo{sub 2}N can be obtained by reducing Single-crystal spherical β-MoO{sub 3} with NH{sub 3}. • The as-prepared γ-Mo{sub 2}N inherited the morphology and size of β-MoO{sub 3} precursors. • β-Mo{sub 2}N can be obtained if using the N{sub 2}-H{sub 2} mixed gases. • The morphologies of β-Mo{sub 2}N had no heredity with the parent MoO{sub 3}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anharmonicity of Lattice Vibrations in Bi{sub 2}Se{sub 3} Single Crystals

The temperature dependences of the Raman-active frequencies E{sub g}{sup 2}, A{sub 1g}{sup 2} in layered Bi{sub 2}Se{sub 3} single crystals are studied. The contribution of the thermal expansion to a temperature variation in the frequencies is determined. The decay of the anisotropy of the elastic properties in layered Bi{sub 2}Se{sub 3} single crystals due to strong spin–orbit coupling is shown. The Gruneisen-mode parameters for phonons E{sub g}{sup 2} and A{sub 1g}{sup 2} are calculated. Systematic features in the dependences of vibrational frequencies on the atomic masses in layered Bi{sub 2}Te{sub 3}, Bi{sub 2}Se{sub 3}, and Sb{sub 2}Te{sub 3} single crystals are determined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of B 2 O 3 on the Growth, Structural, and Magneto-Optical Properties of Yttrium Iron Garnet Single-Crystal Fibers

This study explores the fabrication of yttrium iron garnet (YIG) single crystal fibers using the laser heated pedestal growth (LHPG) method with the experimental addition of B 2 O 3 . The incorporation of B 2 O 3 facilitates the fiber fabrication process by lowering the required growth temperatures and likely modifying melt viscosity behavior, consistent with the established fluxing behavior of B2O3 and the comparative viscosity trend observed in the TMA−VFT analysis, thereby improving process efficiency while maintaining fiber quality. Structural characterization using EBSD and SC-XRD reveals a transition from polycrystalline to single-crystal behavior, with improved alignment along the [111] direction without altering the garnet structure. Magnetic measurements show increases in saturation magnetization in B 2 O 3 -assisted fibers. Three-dimensional anisotropy energy modeling, based on EBSD-derived Euler angles, indicates that the enhanced crystallinity and orientation contribute to reorientation of MCA energy distribution due to improved crystallographic alignment. Faraday rotation measurements show that the B 2 O 3 -assisted sample exhibits a rotation angle closer to reported values for high-quality YIG, suggesting improved phase purity and crystallographic quality. These findings demonstrate that B 2 O 3 -assisted LHPG growth is a scalable and nontoxic approach to producing high-performance YIG fibers for integrated photonic and magnetic field sensing applications.

Crystal structure↗

NMR spin-lattice relaxation study of {sup 7}Li and {sup 93}Nb nuclei in Ti- or Fe-doped LiNbO{sub 3}:Mg single crystals

In this study, to understand the effects of paramagnetic impurities, we investigated the temperature dependent of the spin-lattice relaxation times of pure LiNbO{sub 3}, LiNbO{sub 3}:Mg, LiNbO{sub 3}:Mg/Ti, LiNbO{sub 3}:Mg/Fe, and LiNbO{sub 3}:Mg/Fe (thermally treated at 500°C) single crystals. The results for the LiNbO{sub 3}:Mg single crystals doped with Fe{sup 3+} or Ti{sup 3+} are discussed with respect to the site distribution and atomic mobility of Li and Nb. In addition, the effects of a thermal treatment on LiNbO{sub 3}:Mg/Fe single crystals were examined based on the T{sub 1} analysis of {sup 7}Li and {sup 93}Nb. It was found that the presence of impurities in the crystals induced systematic changes of activation energies concerning atomic mobility.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of the specific features of single-crystal boron microstructure

A complex study of the structure of β-boron single crystal grown by the floating-zone method, with sizes significantly exceeding the analogs known in the literature, has been performed. The study includes X-ray diffraction analysis and X-ray diffractometry (measurement of pole figures and rocking curves), performed on both laboratory and synchrotron sources; atomic-resolution scanning transmission electron microscopy with spherical aberration correction; and energy-dispersive microanalysis. X-ray diffraction analysis using synchrotron radiation has been used to refine the β-boron structure and find impurity Si atoms. The relative variations in the unit-cell parameters a and c for the crystal bulk are found to be δa/a ≈ 0.4 and δc/c ≈ 0.1%. X-ray diffractometry has revealed that the single-crystal growth axis coincides with the [22̄013] crystallographic axis and makes an angle of 21.12° with the [0001] threefold axis. Electron microscopy data have confirmed that the sample under study is a β-boron crystal, which may contain 0.3–0.4 at % Si as an impurity. Planar defects (stacking faults and dislocations) are found. The results of additional measurements of the temperature dependence of the thermal conductivity of the crystal in the range of 50–300 K are indicative of its high structural quality.

36 MATERIALS SCIENCE↗

Laser Fabrication of Two-Dimensional Rotating-Lattice Single Crystal

A rotating lattice single (RLS) crystal is a unique form of solid, which was fabricated recently as one-dimensional architecture in glass via solid state transformation induced by laser irradiation. In these objects, the lattice rotates gradually and predictably about an axis that lies in the plane of the crystal and is normal to the laser scanning direction. This paper reports on the fabrication of Sb 2 S 3 two-dimensional (2D) RLS crystals on the surface of 16SbI 3 -84Sb 2 S 3 glass, as a model example: individual RLS crystal lines are joined together using "stitching" or "rastering" as two successful protocols. The electron back scattered diffraction mapping and scanning Laue X-ray microdiffraction of the 2D RLS crystals show gradual rotation of lattice comprising of two components, one along the length of each line and another normal to this direction. The former component is determined by the rotation of the first line of the 2D pattern, but the relative contribution of the last component depends on the extent of overlap between two successive lines. By the appropriate choice of initial seed orientation and the direction of scanning, it is possible to control the lattice rotation, and even to reduce it down to 5 for a 50 × 50 μm 2 2D pattern of Sb 2 S 3 crystal.

36 MATERIALS SCIENCE↗

Orientation and temperature dependence of some mechanical properties of the single-crystal nickel-base superalloy Rene N4. 3: Tension-compression anisotropy

Single crystal superalloy specimens with various crystallographic directions along their axes were tested in compression at room temperature, 650, 760, 870, and 980 deg C. These results are compared with the tensile behavior studied previously. The alloy, Rene N4, was developed for gas turbine engine blades and has the nominal composition 3.7 Al, 4.2 Ti, 4 Ta, 0.5 Nb, 6 W, 1.5 Mo 9 Cr. 7.5 Co, balance Ni, in weight percent. Slip trace analysis showed that primary cube slip occurred even at room temperature for the 111 specimens. With increasing test temperature more orientations exhibited primary cube slip, until at 870 deg C only the 100 and 011 specimens exhibited normal octahedral slip. The yield strength for octahedral slip was numerically analysed using a model proposed by Lall, Chin, and Pope to explain deviations from Schmid's Law in the yielding behavior of a single phase Gamma prime alloy, Ni3(Al, Nb). The Schmid's Law deviations in Rene N4 were found to be largely due to a tension-compression anisotropy. A second effect, which increases trength for orientations away from 001, was found to be small in Rene N4. Analysis of recently published data on the single crystal superalloy PWA 1480 yielded the same result.

Miner, R. V.↗

Single Crystal Synthesis and STM Studies of High Temperature Superconductors

This is a final report for the work initiated in September of 1994 under the grant NAG8-1085 - NASA/OMU, on the fabrication of bulk and single crystal synthesis, specific heat measuring and STM studies of high temperature superconductors. Efforts were made to fabricate bulk and single crystals of mercury based superconducting material. A systematic thermal analysis on the precursors for the corresponding oxides and carbonates were carried out to synthesized bulk samples. Bulk material was used as seed in an attempt to grow single crystals by a two-step self flux process. On the other hand bulk samples were characterized by x-ray diffraction, electrical resistivity and magnetic susceptibility, We studied the specific heat behavior in the range from 80 to 300 K. Some preliminary attempts were made to study the atomic morphology of our samples. As part of our efforts we built an ac susceptibility apparatus for measuring the transition temperature of our sintered samples.

Barrientos, Alfonso↗