Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sensitivity Coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

High-Sensitivity Low-Energy Ion Spectroscopy with Sub-Nanometer Depth Resolution Reveals Oxidation Resistance of MoS 2 Increases with Film Density and Shear-Induced Nanostructural Modifications of the Surface

For decades, density has been attributed as a critical aspect of the structure of sputter-deposited nanocrystalline molybdenum disulfide (MoS 2 ) coatings impacting oxidation resistance and wear resistance. Despite its importance, there are few examples in the literature that explicitly investigate the relationship between the density and oxidation behaviors of MoS 2 coatings. Aging and oxidation are primary considerations for the use of MoS 2 coatings in aerospace applications as they inevitably experience prolonged storage in water and oxygen-rich environments prior to use. Oxidation that is either limited to the first few nanometers or through the bulk of the coating can result in seizure due to high initial coefficients of friction or component failure from excessive wear. High-sensitivity low-energy ion spectroscopy (HS-LEIS) and Rutherford backscattering spectrometry (RBS) are both used to understand the extent of oxidation throughout the first ~10 nanometers of the surface of pure sputtered nanocrystalline MoS 2 coatings after high-temperature aging and how it is impacted by the density of coatings as measured by RBS. Results show that low-density coatings (ρ = 3.55 g/cm 3 ) exhibit a more columnar microstructure and voiding, which act as pathways for oxidative species to penetrate and interact with edge sites, causing severe surface and subsurface oxidation. Furthermore, HS-LEIS of surfaces sheared prior to oxidation reveals that the oxidation resistance of low-density MoS 2 coatings can be significantly improved by shear-induced reorientation of the surface microstructure to a basal orientation and elimination of pathways for oxygen into the bulk through compaction of surface and subsurface voids.

36 MATERIALS SCIENCE↗

Next neighbors effect along the Ca–Sr–Ba-åkermanite join: Long-range vs. short-range structural features

An original approach has been developed herein to explore the correlations between short- and long-range structural properties of solid solutions. X-ray diffraction (XRD) and electronic absorption spectroscopy (EAS) data were combined on a (Ca,Sr,Ba){sub 2}(Mg{sub 0.7}Co{sub 0.3})Si{sub 2}O{sub 7} join to determine average and local distances, respectively. Instead of varying the EAS-active ion concentration along the join, as has commonly been performed in previous studies, the constant replacement of Mg{sup 2+} by a minimal fraction of a similar size cation (Co{sup 2+}) has been used to assess the effects of varying second-nearest neighbor cations (Ca, Sr, Ba) on the local distances of the first shell. A comparison between doped and un-doped series has shown that, although the overall symmetry of the Co-centered T1-site was retained, greater relaxation occurs at the CoO{sub 4} tetrahedra which become increasingly large and more distorted than the MgO{sub 4} tetrahedra. This is indicated by an increase in both the quadratic elongation (λ{sub T1}) and the bond angle variance (σ{sup 2}{sub T1}) distortion indices, as the whole structure expands due to an increase in size in the second-nearest neighbors. This behavior highlights the effect of the different electronic configurations of Co{sup 2+} (3d{sup 7}) and Mg{sup 2+} (2p{sup 6}) in spite of their very similar ionic size. Furthermore, although the overall symmetry of the Co-centered T1-site is retained, relatively limited (<10 deg) angular variations in O–Co{sup 2+}–O occur along the solid solution series and large changes are found in molar absorption coefficients showing that EAS Co{sup 2+}-bands are highly sensitive to change in the local structure. - Graphical abstract: Average (Mg–O) vs. local (Co–O{sub local}) tetrahedral bond distances in function of the average X cation radius in the (Ca,Sr,Ba){sub 2}(Mg{sub 0.7}Co{sub 0.3})Si{sub 2}O{sub 7} join. - Highlights: • New method to assess short- vs. long-range properties of non-ideal solid solutions. • Constant Co{sup 2+}-for-Mg replacement turns the Ca–Sr–Ba-åkermanite join EAS-active. • Co→Mg substitution does not produce any alteration in the average structure. • Relaxation around Co-tetrahedra scales with second-nearest neighbor cation radius. • Different electronic configurations of Co and Mg cause different local structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Single-Molecule Fluorescence Imaging of DNA at a Potential-Controlled Interface

Many interfacial chemical phenomena are governed in part by electrostatic interactions between polyelectrolytes and charged surfaces; these phenomena can influence the performance of biosensors, adsorption of natural polyelectrolytes (humic substances) on soils, and production of polyelectrolyte multilayer films. In order to understand electrostatic interactions that govern these phenomena, we have investigated the behavior of a model polyelectrolyte, 15 kbp fluorescently labeled plasmid DNA, near a polarized indium tin oxide (ITO) electrode surface. The interfacial population of DNA was monitored in situ by imaging individual molecules through the transparent electrode using total-internal-reflection fluorescence microscopy. At applied potentials of +0.8 V versus Ag/AgCl, the DNA interfacial population near the ITO surface can be increased by 2 orders of magnitude relative to bulk solution. The DNA molecules attracted to the interface do not adsorb to ITO, but rather they remain mobile with a diffusion coefficient comparable to free solution. Ionic strength strongly influences the sensitivity of the interfacial population to applied potential, where the increase in the interfacial population over a +300 mV change in potential varies from 20% in 30 mM ionic strength to over 25-fold in 300 μM electrolyte. The DNA accumulation with applied potential was interpreted using a simple Boltzmann model to predict average ion concentrations in the electrical double layer and the fraction of interfacial detection volume that is influenced by applied potential. A Gouy–Chapman model was also applied to the data to account for the dependence of the ion population on distance from the electrode surface, which indicates that the net charge on DNA responsible for interactions with the polarized surface is low, on the order of one excess electron. Furthermore, the results are consistent with a small fraction of the DNA plasmid being resident in the double-layer and with counterions screening much of the DNA excess charge.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Skin depth criterion for foil thickness in laser pressure acceleration of monoenergetic ions

An analytical formalism is developed to study the nonlinear laser penetration through radiation pressure accelerated thin foils, employed to produce high energy ions. We include the effects of relativistic mass increase and nonuniform electron density compression due to the ponderomotive force in plasma permittivity. For foils like diamond the usual optimum foil thickness l{sub opt}={lambda}{sub L}n{sub cr}a{sub 0}/{pi}n{sub 0} (where {lambda}{sub L} and a{sub 0} are the wavelength and normalized amplitude of the laser), at which the ponderomotive force on electrons balances the space charge force due to the ions left behind, is significantly below the skin depth unless the laser intensity is excessively large and significant laser transmission through the foil reduces the radiation pressure on it. The reflection coefficient decreases with laser field strength, though the ponderomotive force led electron compression tends to raise it. The reflection coefficient also decreases significantly with foil velocity, which is a sensitive function of laser field strength and foil thickness.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Sensitivity of the 13 C(α,n) 16 O S factor to the uncertainty in the level parameters of the near-threshold state

The 13 C(α,n) 16 O reaction is the main source of neutrons for the s and i processes in asymptotic giant branch stars and carbon-enhanced metal-poor stars, respectively. The reaction rate over the relevant temperature range from 0.1 to 0.3 GK translates into a center-of-mass energy range of 150 to 540 keV. Current measurements extend down to 300 keV, still requiring an extrapolation of the cross section. At these low energies, the high-energy tail of a 1/2 + state near the reaction threshold makes a significant contribution to the cross section, but its amplitude is still highly uncertain. In this work the uncertainties associated with the low-energy cross-section extrapolation are investigated, in particular the sensitivity to the energy, width, and Coulomb renormalized asymptotic normalization coefficient of the near-threshold resonance. Furthermore, recently it has been suggested that the energy of the near-threshold level may have a large impact on the extrapolation, but this is not found to be the case compared with the other sources of uncertainty.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Exploring theoretical uncertainties in the hydrodynamic description of relativistic heavy-ion collisions

We explore theoretical uncertainties in the hydrodynamic description of relativistic heavy-ion collisions by examining the full nonlinear causality conditions and quantifying the second-order transport coefficients' role on flow observables. The causality conditions impose physical constraints on the maximum allowed values of inverse Reynolds numbers during the hydrodynamic evolution. Including additional second-order gradient terms in the Denicol-Niemi-Molnár-Rischke (DNMR) theory significantly shrinks the casual regions compared to those in the Israel-Stewart hydrodynamics. For Au + Au collisions, we find the variations of flow observables are small with and without imposing the necessary causality conditions, suggesting a robust extraction of the quark-gluon plasma's transport coefficients in previous model-to-data comparisons. However, sizable sensitivity is present in small p + Au collisions, which poses challenges to study the small systems' collectivity.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Modeling, Design, and Experimental Verification of a WPT Level-3 Wireless Charger with Compact Secondary Coupler

This study introduces a wireless power transfer (WPT) Level-3 rated charger with >11 kW nominal output. The proposed system is interoperable for WPT Level-1, 2, and 3 charger applications of which power levels and airgap separations are defined in SAE J2954. The system designed for this study is capable of operating at Z 1 (100-150 mm), Z 2 (140-210 mm) and Z 3 (170-250 mm) vehicle assembly ground clearance range classes with a very compact vehicle-side (secondary) coupler. The couplers are characterized for the maximum output power (P out ) and the coupling coefficient (k) with different airgaps. System frequency response and the sensitivity analysis are presented. Experimental results are shown for 190.5 mm and 216 mm airgap separations. These results demonstrate that the proposed system with a very compact secondary can be operated at these ground clearance classes with high efficiency at WPT level-3 charging levels.

Onar, Omer↗

In situ ultrahigh vacuum residual gas analyzer 'calibration'

Knowing the residual gas spectrum is essential for many applications and research in ultrahigh vacuum (UHV). Residual gas analyzers (RGAs) are used for both qualitative and quantitative gas analyses, where the quadrupole mass analyzers are now the most popular. It was found that RGAs supplied by different manufacturers are not necessarily well calibrated for quantitative gas analysis. A procedure applied for in situ RGA 'calibration' against a calibrated UHV total pressure gauge is described in this article. It was found that special attention should be paid to H{sub 2} calibration, as RGAs are usually much more sensitive to H{sub 2} than ionization gauges. The calibration coefficients are quite reproducible in Faraday cup mode, however, using the secondary electron multiplier requires frequent checks of the calibration coefficients. The coefficients obtained for the RGA allow the use of the RGA as an accurate device for gas spectrum analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Performing k eff Validation of As-Loaded Criticality Safety Calculations Using UNF-ST&DARDS: Applicable Experiment Selection

The general method for performing validation of as loaded criticality safety calculations using UNF ST&DARDS is presented in a paper by Clarity, which includes a description of the UNF-ST&DARDS system. Proof-of-principle analyses were performed in the summer of 2019 for MPC-32 dual purpose canisters (DPCs) containing pressurized water reactor (PWR) fuel assemblies. Summaries of these results are presented in this and a companion paper for this conference. The current paper describes the TSUNAMI-IP calculations performed to select applicable experiments for validation of 11 MPC-32 DPCs. The companion paper discusses the TSUNAMI-3D calculations used to generate sensitivity data to support the experiment selections discussed here. Experiment selection is based on the sensitivity/uncertainty (S/U) methods used to validate criticality safety calculations of as-loaded DPCs containing pressurized water reactor (PWR) spent nuclear fuel (SNF). This process has been demonstrated and is summarized in this paper. The approach is similar to that used in NUREG/CR-7109, which provides an approach for validation of PWR burnup credit (BUC), including major and minor actinides and major fission products. The premise of S/U-based validation is that applicable experiments—those having a similar bias to a given application system—will have similar sensitivities for each isotope and reaction in the two systems. It is assumed that cross sections with larger uncertainties are more likely to contain data errors which contribute to the bias. The integral index c k thus propagates the system sensitivities with the nuclear covariance data to calculate a correlation coefficient representing the similarity of the two systems. In this work, a c k value of 0.8 or higher is interpreted as identifying an experiment with sufficient similarity for use in validation. This paper presents a brief summary of the characteristics of the 11 MPC-32 DPCs used in the proof of-principle analysis for as-loaded criticality safety calculation validation and an overview of the critical experiment suite with which each of these DPC models was compared. A summary and discussion of c k results is also presented, followed by conclusions and a discussion of future work to be performed for validation of UNF ST&DARDS as-loaded criticality safety calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Effect of Reaction Kinetics on Graphene-Edge Morphology and Composition

New simulations of graphene growth in flame environments are presented. The simulations employed a kinetic Monte Carlo (KMC) algorithm coupled to molecular mechanics (MM) geometry optimization to track individual graphenic species as they evolve. Focus was given to incorporation of five-member rings and resulting curvature and edge defects. The model code was re-written to be more computationally efficient enabling a larger set of simulations to be run, decreasing stochastic fluctuations in the averaged results. The model also included updated rate coefficients for graphene edge reactions recently published in the literature. Sensitivity analysis, enabled by the more efficient coding, confirmed the importance of the updated rates as well as providing further insight on key reactions controlling layer growth and morphology. The new KMC code was applied to simulate graphene-layer growth in the environments of laminar premixed flames. Finally, in these flame simulations, C-H ratios of evolving structures were computed and compared to those from experiment and from an alternate model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A One-dimensional Heat Transfer Model for a Cooled Airfoil in a Direct-fired Supercritical CO 2 Turbine

A one-dimensional (1-D) heat transfer model was developed to predict the performance of a cooled airfoil for a supercritical carbon dioxide (sCO 2 ) turbine. The model included the effects of film cooling effectiveness, thermal barrier coating thickness, and internal Nusselt number augmentation. Trends for overall cooling effectiveness versus heat load parameter were obtained for over twelve unique thermal management schemes. The study found that adding a thermal barrier coating was the most effective scheme for increasing the airfoil overall cooling effectiveness. Internal cooling technologies have diminishing returns as the heat transfer coefficient augmentation increases past a factor of five, however the sensitivity of overall cooling effectiveness to heat transfer augmentation scales by a factor of 1.3 when a thermal barrier coating is introduced. Film cooling is seen as a long-term research area which will be inevitably explored as direct sCO 2 systems develop a market presence. However, the model indicates that realizable film cooling effectiveness levels yield a smaller improvement in overall cooling effectiveness than a thermal barrier coating.

42 ENGINEERING↗

Modeling Smoke Plume-Rise and Dispersion from Southern United States Prescribed Burns with Daysmoke.

We present Daysmoke, an empirical-statistical plume rise and dispersion model for simulating smoke from prescribed burns. Prescribed fires are characterized by complex plume structure including multiple-core updrafts which makes modeling with simple plume models difficult. Daysmoke accounts for plume structure in a three-dimensional veering/sheering atmospheric environment, multiple-core updrafts, and detrainment of particulate matter. The number of empirical coefficients appearing in the model theory is reduced through a sensitivity analysis with the Fourier Amplitude Sensitivity Test (FAST). Daysmoke simulations for 'bent-over' plumes compare closely with Briggs theory although the two-thirds law is not explicit in Daysmoke. However, the solutions for the 'highly-tilted' plume characterized by weak buoyancy, low initial vertical velocity, and large initial plume diameter depart considerably from Briggs theory. Results from a study of weak plumes from prescribed burns at Fort Benning GA showed simulated ground-level PM2.5 comparing favorably with observations taken within the first eight kilometers of eleven prescribed burns. Daysmoke placed plume tops near the lower end of the range of observed plume tops for six prescribed burns. Daysmoke provides the levels and amounts of smoke injected into regional scale air quality models. Results from CMAQ with and without an adaptive grid are presented.

54 ENVIRONMENTAL SCIENCES↗

Heterogeneous chemistry: a mechanism missing in current models to explain secondary inorganic aerosol formation during the January 2013 haze episode in North China

Severe regional haze pollution events occurred in eastern and central China in January 2013, which had adverse effects on the environment and public health. Extremely high levels of particulate matter with aerodynamic diameter of 2.5 μm or less (PM 2.5 ) with dominant components of sulfate and nitrate are responsible for the haze pollution. Although heterogeneous chemistry is thought to play an important role in the production of sulfate and nitrate during haze episodes, few studies have comprehensively evaluated the effect of heterogeneous chemistry on haze formation in China by using the 3-D models due to of a lack of treatments for heterogeneous reactions in most climate and chemical transport models. In this work, the WRF-CMAQ model with newly added heterogeneous reactions is applied to East Asia to evaluate the impacts of heterogeneous chemistry and the meteorological anomaly during January 2013 on regional haze formation. As the parameterization of heterogeneous reactions on different types of particles is not well established yet, we arbitrarily selected the uptake coefficients from reactions on dust particles and then conducted several sensitivity runs to find the value that can best match observations. The revised CMAQ with heterogeneous chemistry not only captures the magnitude and temporal variation of sulfate and nitrate, but also reproduces the enhancement of relative contribution of sulfate and nitrate to PM 2.5 mass from clean days to polluted haze days. Finally, these results indicate the significant role of heterogeneous chemistry in regional haze formation and improve the understanding of the haze formation mechanisms during the January 2013 episode.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamic analysis of gas-core reactor system

A heat transfer analysis was incorporated into a previously developed model CODYN to obtain a model of open-cycle gaseous core reactor dynamics which can predict the heat flux at the cavity wall. The resulting model was used to study the sensitivity of the model to the value of the reactivity coefficients and to determine the system response for twenty specified perturbations. In addition, the model was used to study the effectiveness of several control systems in controlling the reactor. It was concluded that control drums located in the moderator region capable of inserting reactivity quickly provided the best control.

Turner, K. H., Jr.↗

Tropospheric ozone - Coupling transport and photochemistry

The budget of tropospheric ozone is re-examined in the light of lower observed nitrogen oxide densities and revised reaction rates. To estimate the relative importance of transport and photochemistry, model calculations are presented which determine one-dimensional vertical ozone profiles at midlatitudes for equinoctial conditions. These calculations imply that both photochemistry and transport are important in controlling the abundance of tropospheric ozone. It is estimated that photochemical processes produce about 0.6 times 10 to the eleventh and destroy about 1.4 times 10 to the eleventh tropospheric ozone molecules per sq cm per sec, while mixing processes transport about 1.4 times 10 to the eleventh ozone molecules per sq cm per sec from the stratosphere into the troposphere and ground level fluxes destroy about 0.6 times 10 to the eleventh ozone molecules per sq cm per sec. The sensitivity of our model calculations to transport parameters, key rate coefficients, and nitrogen oxide densities are discussed.

Chameides, W. L.↗

A specific radioimmunoassay for osteocalcin with advantageous species crossreactivity

The specificities of immunoassays to rat and bovine osteocalcin are examined. Extracts of noncalcified tissues and tissue fractions are unreactive to the antibody, with the exception of the kidney, in which the reactive component appears to be identical with osteocalcin by gel filtration and dose dilution analysis. The assays, developed against protein isolated from bone, are also demonstrated to be reactive to the native protein (bone in situ) and to osteocalcin in serum. The assays are sensitive to less than 50 pg osteocalcin. Intra- and interassay coefficients of variation are less than 6.8%. The bovine antibody crossreacts with human, horse, monkey, baboon, and cat osteocalcin, while the rat antibody crossreacts with dog and mouse.

Patterson-Allen, P.↗

A model function for ocean microwave brightness temperatures

A relatively simple, yet accurate, relationship between the microwave brightness temperature of the ocean and conventional oceanographic and meteorological parameters is derived. The equation for the brightness temperature upwelling from the sea surface through the intervening atmosphere is obtained, considering radiative emission and scattering by the sea surface along with radiative absorption and emission by the atmosphere. A number of approximations are applied to the integral brightness temperature equation and its supporting equations in order to obtain a simple equation for the brightness temperature that does not contain integrals. Values for a number of atmospheric parameters are determined, including temperature sensitivities, oxygen opacity, water vapor and liquid water normalized absorption coefficients, and effective columnar height. The sea surface emissivity model is then considered, modelling the sea surface as a composite of foam-free rough water and foam patches.

Wentz, F. J.↗

Iterative methods for design sensitivity analysis

A numerical method is presented for design sensitivity analysis, using an iterative-method reanalysis of the structure generated by a small perturbation in the design variable; a forward-difference scheme is then employed to obtain the approximate sensitivity. Algorithms are developed for displacement and stress sensitivity, as well as for eignevalues and eigenvector sensitivity, and the iterative schemes are modified so that the coefficient matrices are constant and therefore decomposed only once.

Belegundu, A. D.↗