Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STREAMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Simultaneous film and convection cooling of a plate inserted in the exhaust stream of a gas turbine combustor

Data were obtained on a parallel-flow film- and convection-cooled test section placed in the exhaust stream of a rectangular-sector combustor. The combustor was operated at atmospheric pressure and at exhaust temperatures of 589 and 1033 K (600 and 1400 F). The cooling air was at ambient pressure and temperature. Test results indicate that it is better to use combined film and convection cooling rather than either film or convection cooling alone for a fixed total coolant flow. An optimum ratio of film to convection cooling flow rates was determined for the particular geometry tested. The experimental results compared well with calculated results.

Marek, C. J.↗

Effect of pressure on tangential-injection film cooling in a combustor exhaust stream

A tangential-injection film cooled test section was placed in the exhaust stream of a high pressure combustor. Film cooling data were taken at pressure of 1, 10, and 20 atmospheres. The film cooling effectiveness was found to be independent of pressure. The data were correlated adequately by a turbulent-mixing film cooling correlation with a turbulent-mixing coefficient of 0.05 + or - 0.02.

Marek, C. J.↗

Turbulent mixing of multiple, co-axial helium jets in a supersonic air stream

An experimental study of a strut-mounted, five-port, coaxial gaseous fuel injector assembly in a Mach 4 air stream with P sub o = 145 psia and T sub o = 546 R was conducted. Helium was used as the injectant, and the interjet spacing was the main parameter varied. The principal data are in the form of helium concentration profiles at six axial stations and pitot pressure profiles at two axial stations. Schlieren photographs are also presented. The slight sensitivity of the mixing rate to decreased interjet spacing was determined in the range 3.5 or = to S/D or = to 5.0.

Lorber, A. K.↗

Multiple-orifice liquid injection into hypersonic air streams.

Review of oblique water and fluorocarbon injection test results obtained in experimental studies of the effects of multiple-orifice liquid injection into hypersonic air streams. The results include the finding that maximum lateral penetration from such injections increases linearly with the square root of the jet-to-freestream dynamic-pressure ratio and is proportional to an equivalent orifice diameter.

Weaver, W. L.↗

The dynamic behavior and compliance of a stream of cavitating bubbles.

Study of the dynamic response of streams of cavitating bubbles to imposed pressure fluctuations to determine the role played by turbopump cavitation in the POGO instability of liquid rockets. Both quasi-static and more general linearized dynamic analyses are made of the perturbations to a cavitating flow through a region of reduced pressure in which the bubbles first grow and then collapse. The results, when coupled with typical bubble number density distribution functions, yield compliances which compare favorably with the existing measurements. Since the fluids involved are frequently cryogenic, a careful examination was made of the thermal effects both on the mean flow and on the perturbations. As a result, the discrepancy between theory and experiment for particular engines could be qualitatively ascribed to reductions in the compliance caused either by these thermal effects or by relatively high reduced frequencies.

Brennen, C.↗

The turbulence structure in the plane two-stream mixing layer.

Experimental data on the turbulent structure of free shear layers is examined in incompressible air streams. Both single-point and two-point data are used to examine the large coherent structure of the mixing layer. The use of spatial scales to define this large structure is explored. Application of these scales to modeling of free shear layers to show the similarity of such flows is demonstrated. Comparison of the statistical structure with observations from shadowgraph displays of plane shear layer flows shows good qualitative and quantitative agreement.

Jones, B. G.↗

Note on the modified two-stream approximation of Sagan and Pollack.

The modified two-stream approximation is derived from the radiative transfer equation using a two-point gaussian quadrature and neglecting terms of order l equal to or greater than 3 in the Legendre expansion of the phase function. The results are compared with the Eddington approximation and with exact results for the special cases of perfect absorption, perfect scattering, and a semi-infinite layer with isotropic scattering.

Lyzenga, D. R.↗

Drag characteristics of circular cylinders in a laminar boundary layer at supersonic free-stream velocities

Drag measurements were obtained with circular cylinders attached to a flat-plate surface with their longitudinal axes perpendicular to the plate surface. When more than one cylinder was tested, they were alined in a spanwise row perpendicular to the free-stream velocity vector. The drag measurements were obtained through a range of Mach numbers from 2.3 to 4.6, cylinder heights ranging from approximately 0.4 to 3 times the undisturbed laminar boundary-layer thickness, and cylinder height-to-diameter ratios of 1.0 and approximately 2. Included in the paper is a complete presentation in figure form of the experimental results and a discussion of the more significant findings. An attempt is made to select the most appropriate parameters for correlating the experimental results and, where possible, these results are compared with theoretical calculations.

Stallings, R. L., Jr.↗

Venting characteristics of gaseous helium and nitrogen discharging into a free stream at Mach numbers from 0.60 to 1.57

An experimental investigation was conducted in the Lewis Research Center 8- by 6-Foot Supersonic Wind Tunnel to compare the effects on discharge coefficient of venting gaseous helium and gaseous nitrogen into a free stream. The test was conducted from Mach 0.06 to 1.57 with the vent mounted in a flat plate. The plate was strut mounted to the tunnel ceiling and at a 0 angle of attack. The gases were discharged from a plenum chamber through a 2.54-centimeter (1.00-in.) diameter vent. The ratio of local static pressure to plenum pressure was varied from 0.51 to 0.975. The ratio of boundary layer thickness to vent diameter varied from a maximum of 1.34 at Mach 0.60 to a minimum of 0.55 at Mach 1.37.

Johns, A. L.↗

Calculation of supersonic stream parameters of a real gas from measurable quantities using FORTRAN 4 routines

Sets of routines are presented that calculate such real-gas supersonic stream properties as velocity, density, enthalpy, entropy, and isentropic exponent. Two alternative sets of measurements are assumed: (1) stagnation pressure, stagnation temperature, and the pressure on the surface of a static-pressure wedge; or (2) pressure and temperature in a plenum upstream of a supersonic nozzle and the stagnation pressure at the exit of this nozzle. The routines are applicable to any gas whose properties are known. Explicit routines are presented for determining these properties for air, nitrogen, oxygen, normal hydrogen, para-hydrogen, helium, argon, steam, methane, and natural gas.

Johnson, R. C.↗

Performance of LI-1542 reusable surface insulation system in a hypersonic stream

The thermal and structural performance of a large panel of LI-1542 reusable surface insulation tiles was determined by a series of cyclic heating tests using radiant lamps and aerothemal tests in the Langley 8-foot high-temperature structures tunnel. Aerothermal tests were conducted at a free-stream Mach number of 6.6, a total temperature of 1830 K, Reynolds numbers of 2.0 and 4,900,000 per meter, and dynamic pressures of 29 and 65 kPa. The results suggest that pressure gradients in gaps and flow impingement on the header walls at the end of longitudinal gaps are sources for increased gap heating. Temperatures higher than surface radiation equilibrium temperature were measured deep in gaps and at the header walls. Also, the damage tolerance of the LI-1542 tiles appears to be very high. Tile edge erosion rate was slow; could not be tolerated in a shuttle application. Tiles soaked with water and subjected to rapid depressurization and aerodynamic heating showed no visible evidence of damage.

Hunt, L. R.↗

Initiation and structure of axisymmetric eddies in a rotating stream

Axisymmetric flow of a rotating stream is examined numerically to determine conditions under which an isolated eddy will form on the axis of rotation. An explicit finite difference procedure is used to integrate the time dependent transport equations. Solutions provide details of the flow structure and are presented for a range of Reynolds numbers and swirl ratios. Calculated results are interpreted in terms of recent physical experiments insofar as is possible.

Kopecky, R. M.↗

Effects of solar wind composition, anisotropy, and streaming on ordinary mode electromagnetic instability

The stability of the low-frequency waves propagating transverse to the magnetic field of a plasma composed of electrons, protons, and alpha particles with anisotropic electron and ion temperatures is explored. The threshold for the ordinary mode instability and the growth rates have a very strong dependence on the electron temperature anisotropy but have a comparatively weaker dependence on the ion temperature anisotropy, on the relative abundance of helium to hydrogen, and on the relative streaming of two ion species. The threshold for the instability of these low-frequency waves is (m sub e/m sub p) to the 1/2 power times smaller than the one corresponding to high-frequency waves; however, for a relative abundance of helium to hydrogen up to 20% for the relevant known magnetic fields, particle densities, temperatures, and drifts, the solar wind remains below the threshold for this instability.

Buti, B.↗

A coronal hole and its identification as the source of a high velocity solar wind stream

X-ray images of the solar corona showed a magnetically open structure in the low corona which extended from N20W20 to the south pole. Analysis of the measured X-ray intensities shows the density scale heights within the structure to be typically a factor of two less than that in the surrounding large scale magnetically closed regions. The structure is identified as a coronal hole. Wind measurements for the appropriate period were traced back to the sun by the method of instantaneous ideal spirals. A striking agreement was found between the Carrington longitude of the solar source of a recurrent high velocity solar wind stream and the position of the hole.

Krieger, A. S.↗

Nonequilibrium boundary layer at a stagnation point for a hydrogen-helium stream over ablating graphite

The nonequilibrium axisymmetric stagnation point boundary layer over an ablating graphite surface is considered. The external stream is a high temperature mixture of hydrogen and helium. Variable thermodynamic and transport properties are assumed. Lennard-Jones potential model is used to calculate the transport coefficients of each species. Although the mixture rules for viscosity of the gas mixture are used, the weighting functions are more sophisticated than those commonly employed. For the conductivity of the mixture, generalized Wassiljewa coefficients are used. Seven species with 28 dissociation/recombination reactions are considered. Hansen's model for the dissociation rate constants is employed. The recombination rate constants are obtained by invoking detailed balance principles assisted by the JANAF thermodynamic data and the Hansen-Pearson thermodynamic data for C3.

Liu, T.-M.↗

Cosmic-ray streaming perpendicular to the mean magnetic field

Starting from a quasi-linear approximation for the ensemble-averaged particle distribution function in a random magnetic field, the complete diffusion tensor is derived. This is done by assuming a simple form for the ensemble-averaged distribution function, explicitly retaining all components of the streaming flux. This derivation obtains the antisymmetric terms in a natural manner. The necessary dropping of higher-order terms gives a criterion for the lower-energy limit of validity of the perpendicular and antisymmetric diffusion coefficients. The limit for the assumed distribution function is about 0.8 GV rigidity in the interplanetary field near 1 AU.

Forman, M. A.↗

Sweep effect on the drag of rows of perpendicular circular cylinders in a laminar boundary layer at supersonic free-stream velocities

Drag measurements were obtained for circular cylinders attached perpendicularly to a flat-plate surface. Measurements were obtained for a single cylinder and for rows of cylinders. The cylinders were alined at various sweep angles relative to the free-stream velocity vector and at spacings appropriate for roughness elements used as boundary layer trips. The drag measurements were obtained for Mach numbers of 3.95 and 4.60, ratios of cylinder height to an undisturbed laminar boundary layer displacement thickness of approximately 1.0 to 3.0, a cylinder height-to-diameter ratio of approximately 2, and sweep angles up to 60. A complete presentation of the experimental results is given. A discussion of the more significant findings, including the most appropriate parameters for correlating the experimental results, is presented.

Lamb, M.↗