Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STACKING FAULTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Cross slip of extended dislocations in face-centered cubic metals through phase-field modeling

Cross slip is a dislocation mechanism that significantly impacts the mechanical behavior of engineering alloys. Here, in this work, we advance a 3D phase-field dislocation dynamics (PFDD) mesoscale technique to simulate cross slip across a broad range of face-centered cubic (FCC) metals. The formulation incorporates elastic anisotropy, an FCC numerical grid, and a high-fidelity representation of the entire γ -surface from density functional theory for eight FCC metals and no adjustable parameters or rules. The relaxed core structures under zero stress for all metals are predicted to extend in plane. The analytical model for stacking fault width agrees well with the PFDD result under the assumption of elastic isotropy but overestimates it under elastic anisotropy, when the degree of anisotropy is large. The dynamic simulations are designed to elucidate the material parameters that influence the propensity for cross slip. Whether cross slip occurs under a non-Schmid stress or to bypass a hard obstacle, the critical stress to cross slip scales strongly with the anisotropic energy coefficient for a screw dislocation.

36 MATERIALS SCIENCE↗

Interface, bulk and surface structure of heteroepitaxial altermagnetic α-MnTe films grown on GaAs(111)

Epitaxial MnTe films have recently seen a surge in research into their altermagnetic semiconducting properties. However, those properties may be extremely sensitive to structural and chemical modifications. We report a detailed investigation of the synthesis of the altermagnet α-MnTe on GaAs(111), which reveals the bulk defect structure of this material, the mechanism by which it releases strain from the underlying substrate, and the impact of oxidation on its surface. X-ray diffraction measurements show that α-MnTe layers with thicknesses spanning 45 to 640 nm acquire lattice parameters different from bulk, mostly due to thermal strain caused by the substrate rather than strain from the lattice mismatch. Through high-resolution transmission electron microscopy (TEM) measurement, we then unveil a misfit dislocation array at the interface, revealing the mechanism by which lattice strain is relaxed. TEM also reveals a stacking fault in the bulk, occurring along a glide plane parallel to the interface. The combination of TEM with polarized neutron reflectometry measurements finally reveals the impact of oxidation on the chemistry of the surface of uncapped MnTe. Furthermore, or findings highlight the subtle role of epitaxy in altering the structure of α-MnTe, providing potential opportunities to tune the altermagnetic properties of this material.

Altermagnets↗

Pervasive symmetry-lowering nanoscale structural fluctuations in the cuprate La 2−𝑥 ⁢Sr 𝑥 ⁢Cu⁢O 4

The cuprate superconductors are among the most widely studied quantum materials, yet there remain fundamental open questions regarding their electronic properties and the role of structural degrees of freedom. Recent neutron and x-ray scattering measurements uncovered exponential scaling with temperature of the strength of orthorhombic fluctuations in the tetragonal phase of La 2−𝑥⁢ Sr 𝑥 ⁢Cu⁢O 4 and Tl 2 ⁢Ba 2 ⁢Cu⁢O 6+𝛿 , unusual behavior that closely resembles prior results for the emergence of superconducting fluctuations, and that points to a common origin rooted in inherent correlated structural inhomogeneity. Here, in this study, we use neutron and x-ray diffuse scattering to provide further insight into structural fluctuations in La 2−𝑥 ⁢Sr 𝑥 ⁢Cu⁢O 4 . We perform measurements up to temperatures that approach the melting point of the undoped parent compound, and we investigate the effects of in situ in-plane uniaxial elastic stress and plastic deformation. Our neutron scattering results for the parent compound La 2 ⁢Cu⁢O 4 reveal that short-range orthorhombic fluctuations persist to the maximum experimental temperature of nearly 1000 K, i.e., to a significant fraction of the crystallization temperature. At this temperature, the spatial characteristic length extracted from the momentum-space data is still about three lattice constants. The neutron scattering experiment enables quasistatic discrimination and reveals that the response is increasingly dynamic at higher temperatures. We also find that neither compressive elastic stress along the tetragonal [110] direction nor irreversible plastic deformation activating the ⟨100⟩⁢[001] slip system significantly alter the robust orthorhombic fluctuations. Overall, these results support the notion that these fluctuations couple to subtle, underlying inhomogeneity that underpins the cuprate phase diagram. Finally, in La 1.8⁢ Sr 0.2⁢ Cu⁢O 4 , we uncover low-energy structural fluctuations at a nominally forbidden reflection that are distinct from the orthorhombic distortions. While the origin of these fluctuations is not clear, they might be related to the presence of extended defects such as dislocations or stacking faults.

Spieker, R. J. [Univ. of Minnesota, Minneapolis, M↗

Field-induced intermediate ordered phase and anisotropic interlayer interactions in α-RuCl 3

In α-RuCl 3 , an external magnetic field applied within the honeycomb plane can induce a transition from a magnetically ordered state to a disordered state that is potentially related to the Kitaev quantum spin liquid. In zero field, single crystals with minimal stacking faults display a low-temperature state with in-plane zigzag antiferromagnetic order and a three-layer periodicity in the direction perpendicular to the honeycomb planes. In this work, we present angle-dependent magnetization, ac susceptibility, and thermal transport data that demonstrate the presence of an additional intermediate-field ordered state at fields below the transition to the disordered phase. Neutron-diffraction results show that the magnetic structure in this phase is characterized by a six-layer periodicity in the direction perpendicular to the honeycomb planes. Theoretically, the intermediate ordered phase can be accounted for by including spin-anisotropic couplings between the layers in a three-dimensional spin model. Together, this demonstrates the importance of interlayer exchange interactions in α-RuCl 3 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Complex pressure-temperature structural phase diagram of the honeycomb iridate Cu 2 IrO 3

Cu 2 IrO 3 is among the newest layered honeycomb iridates and a promising candidate to harbor a Kitaev quantum spin liquid state. Here, we investigate the pressure and temperature dependence of its structure through a combination of powder x-ray diffraction and x-ray absorption fine structure measurements, as well as ab initio evolutionary structure search. At ambient pressure, we revise the previously proposed C2/c solution with a related but notably more stable P2 1 /c structure. Pressures below 8 GPa drive the formation of Ir-Ir dimers at both ambient and low temperatures, similar to the case of Li 2 IrO 3 . At higher pressures, the structural evolution dramatically depends on temperature. Furthermore, a large discontinuous reduction of the Ir honeycomb interplanar distance is observed around 15 GPa at room temperature, likely driven by a collapse of the O-Cu-O dumbbell bonds. At 15 K, pressures beyond 20 GPa first lead to an intermediate phase featuring a continuous reduction of the interplanar distance, which then collapses at 30 GPa across yet another phase transition. However, the resulting structure around 40 GPa is not the same at room and low temperatures. Remarkably, the reduction in interplanar distance leads to an apparent healing of the stacking faults at room temperature, but not at 15 K. Possible implications on the evolution of electronic structure of Cu 2 IrO 3 with pressure are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Realignment and suppression of charge density waves in the rare-earth tritellurides 𝑅⁢Te 3 (𝑅 = La, Gd, Er)

The rare-earth tritellurides have a rich phase diagram that includes charge density waves (CDWs), superconductivity, and magnetic order, offering a platform to study the interplay between these phases on a square-net system. Prior studies have shown that defects can affect the CDW characteristics in these materials, yet coupling between the CDW order and the underlying microstructure has not been studied at the nanoscale. Here we use scanning transmission electron microscopy at cryogenic temperatures to directly visualize the effects of defects on the CDW order and provide a spatially resolved microscopic correlation between the CDW transition and structural defects. Here, we show that in the presence of extended defects, such as dislocations and stacking faults, the weak orthorhombicity of the rare-earth tritellurides is lost and the material becomes pseudotetragonal. Since the orthorhombicity acts as a symmetry breaking field for the CDW transitions in rare-earth tritellurides, the presence of these extended defects modulates the energetics of the CDWs and suppresses the ground-state CDW phase at low temperature.

Charge density waves↗

Assessment of thermally driven local structural phase changes in 1⁢𝑇′−MoTe 2

The role of layer disorder is important in establishing the topological phases of MoTe 2 . A rich tapestry of atomic ordering influences the structural phase transitions (SPTs), but there is little understanding of the mechanistic details of the phase transition. An atomistic level study was conducted to investigate the local structure of the 1⁢𝑇′ and 𝑇 𝑑 phases of MoTe 2 by using the pair distribution function (PDF) technique. While the average structure exhibits an SPT and coexistence of phases as a function of temperature, the local structure showed the suppression of SPT. The sample retained its monoclinic structure at all temperatures in short-range order. A sharp PDF peak observed at short distances indicated a strong atom-atom correlation between the Mo and Te atoms within the Mo octahedra. In addition, a large-box modeling of the PDF data indicated a preferential motion of Te atoms towards 𝑐 axis at all temperatures. Structural defects, such as stacking faults, likely result in the coexistence of phases in the average structure and suppress the local SPT of MoTe 2 . These results are stepping stones to understand the long-debated origins of structural, vibrational, and electronic properties of MoTe 2 and similar transition metal dichalcogenides.

2-dimensional systems↗

Generation of subsurface voids and a nanocrystalline surface layer in femtosecond laser irradiation of a single-crystal Ag target

Structural transformations in a shallow surface region of a bulk Ag (001) target irradiated by a femtosecond laser pulse are investigated in large-scale atomistic simulations and experiments. The simulations reveal a complex interplay of fast laser melting, rapid resolidification, and dynamic relaxation of laser-induced stresses that leads to the formation of a subsurface porous region covered by a nanocrystalline surface layer. The generation of the porous region is consistent with the experimental observation of surface “swelling” occurring at laser fluences below the spallation/ablation threshold and may be related to the incubation effect in multipulse laser ablation of metals. In this work, the nanocrystalline layer is produced by massive nucleation of crystallites triggered by a deep undercooling of the melted surface region experiencing fast quenching at a rate on the order of 10 11 K/s. The predicted surface structure features random crystallographic orientation of nanograins and a high density of stacking faults, twins, and nanoscale twinned structural elements with fivefold symmetry, which suggests high hardness and possible enhancement of catalytic activity of the surface.

incubation effect in laser ablation↗

Crystal growth, microstructure, and physical properties of SrMnSb 2

We report on the crystal and magnetic structures, magnetic, and transport properties of SrMnSb 2 single crystals grown by the self-flux method. Magnetic susceptibility measurements reveal an antiferromagnetic (AFM) transition at T N = 295(3) K. Above T N , the susceptibility slightly increases and forms a broad peak at T ~ 420 K, which is a typical feature of two-dimensional magnetic systems. Neutron diffraction measurements on single crystals confirm the previously reported C-type AFM structure below T N . Both de Haas-van Alphen (dHvA) and Shubnikov-de Haas (SdH) effects are observed in SrMnSb2 single crystals. Analysis of the oscillatory component by a Fourier transform shows that the prominent frequencies obtained by the two different techniques are practically the same within error regardless of sample size or saturated magnetic moment. Transmission electron microscopy (TEM) reveals the existence of stacking faults in the crystals, which result from a horizontal shift of Sb atomic layers suggesting possible ordering of Sb vacancies in the crystals. Increase of temperature in susceptibility measurements leads to the formation of a strong peak at T ~ 570 K that upon cooling under magnetic field the susceptibility shows a ferromagnetic transition at T C ~ 580 K. Neutron powder diffraction on crushed single-crystals does not support an FM phase above T N . Furthermore, X-ray magnetic circular dichroism (XMCD) measurements of a single crystal at the L 2,3 edge of Mn shows a signal due to induced canting of AFM moments by the applied magnetic field. All evidence strongly suggests that a chemical transformation at the surface of single crystals occurs above 500 K concurrently producing a minute amount of ferromagnetic impurity phase.

36 MATERIALS SCIENCE↗

Correlated spin canting in ordered core-shell Fe 3 O 4 / Mn x Fe 3 - x O 4 nanoparticle assemblies

Polarization-analyzed small-angle neutron-scattering methods are used to determine the spin arrangements and experimental length scales of magnetic correlations in ordered three-dimensional assemblies of ~7.4-nm-diam core-shell Fe 3 O 4 /Mn x Fe 3–x O 4 nanoparticles. In moderate to high magnetic fields, the assemblies display a canted magnetic structure where the canting direction is coherent from nanoparticle to nanoparticle, in contrast to the less extended, more single-particle-like behavior for similar ferrite assemblies. The observed magnetic scattering is modeled by assuming that the interparticle dipolar coupling combined with Zeeman effects in a field leads to nanoparticle domains with preferred net spin alignments relative to packing symmetry axes. Over a range of fields and temperatures, the model qualitatively explains the observed scattering anomalies in terms of clusters that vary in area and thickness, highlighting the complex structures adopted in real, dense nanoparticle systems. Here, the clusters often have a strong two-dimensional magnetic character which is attributed to structural stacking faults and the resulting influence of interparticle dipolar interactions for these magnetically soft nanoparticles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Local volume effects in the generalized pseudopotential theory

The generalized pseudopotential theory (GPT) is a compelling approach for deriving real-space transferable interatomic potentials. Using a coarse-grained electronic structure, one can explicitly determine the pair ion-ion and multi-ion interactions in simple and transition metals. While successful in determining bulk properties, in central force metals the GPT fails to describe crystal defects for which there is a significant local volume change. A previous paper [J. A. Moriarty and R. Phillips, Phys. Rev. Lett. 66, 3036 (1991)] found that by allowing the GPT total energy to depend upon some spatially averaged local electron density, the energetics of vacancies and surfaces could be calculated within experimental ranges. In this paper, we develop the formalism further by explicitly calculating the forces and stress tensor associated with this total energy. We call this scheme the adaptive GPT (aGPT) and it is capable of both molecular dynamics (MD) and molecular statics. We apply the aGPT to vacancy formation, divacancy binding, and stacking faults in hcp Mg. We also calculate the local electron density corrections to the bulk elastic constants and phonon dispersion for which there is refinement over the baseline GPT treatment. Furthermore, we demonstrate aGPT-MD simulation through the calculation of thermal expansion in magnesium to 700 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dislocation Structure and Mobility in hcp He 4

We assess the core structure and mobility of the screw and edge basal-plane dislocations in hcp 4 He using path-integral Monte Carlo simulations. Our findings provide key insights into recent interpretations of giant plasticity and mass flow junction experiments. First, both dislocations are dissociated into nonsuperfluid Shockley partial dislocations separated by ribbons of stacking fault, suggesting that they are unlikely to act as one-dimensional channels that may display Lüttinger-liquid-like behavior. Second, the centroid positions of the partial cores are found to fluctuate substantially, even in the absence of applied shear stresses. This implies that the lattice resistance to motion of the partial dislocations is negligible, consistent with the recent experimental observations of giant plasticity. Our results indicate that both the structure of the partial cores and the zero-point fluctuations play a role in this extreme mobility.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atomistic Mechanism Underlying the Si ( 111 ) - ( 7 × 7 ) Surface Reconstruction Revealed by Artificial Neural-Network Potential

The 7×7 reconstruction of the Si(111) surface represents arguably the most fascinating surface reconstruction so far observed in nature. Yet, the atomistic mechanism underpinning its formation remains unclear after it was discovered sixty years ago. Experimentally, it is observed post priori so that analysis of its formation mechanism can only be carried out in analogy with archaeology. Theoretically, density-functional theory (DFT) correctly predicts the Si(111)-(7×7) ground state but is impractical to simulate its formation process; while empirical potentials failed to produce it as the ground state. Developing an artificial neural-network potential of DFT quality, we carried out accurate large-scale simulations to unravel the formation of the Si(111)-(7×7) surface. We reveal a possible step-mediated atom-pop rate-limiting process that triggers massive nonconserved atomic rearrangements, most remarkably, a critical process of collective vacancy diffusion that mediates a sequence of selective dimer, corner-hole, stacking-fault, and dimer-line pattern formation, to fulfill the 7×7 reconstruction. Our findings may not only solve the long-standing mystery of this famous surface reconstruction but they also illustrate the power of machine learning in studying complex structures.

36 MATERIALS SCIENCE↗

Martensitic Transformation in Fe x Mn 80-x Co 10 Cr 10 High-Entropy Alloy

High-entropy alloys and even medium-entropy alloys are an intriguing class of materials in that structure and property relations can be controlled via alloying and chemical disorder over wide ranges in the composition space. Employing density-functional theory combined with the coherent-potential approximation to average over all chemical configurations, we tune free energies between face-centered-cubic and hexagonal-close-packed phases in Fe x Mn 80 - x Co 10 Cr 10 systems. Within Fe-Mn-based alloys, we show that the martensitic transformation and chemical short-range order directly correlate with the face-centered-cubic and hexagonal-close-packed energy difference and stacking-fault energies, which are in quantitative agreement with recent observation of two phase region (face-centered cubic and hexagonal closed pack) in a polycrystalline high-entropy alloy sample at x = 40 at.%. Our predictions are further confirmed by single-crystal measurements on a x = 40 at.% using transmission-electron microscopy, selective-area diffraction, and electron-backscattered-diffraction mapping. The results herein offer an understanding of transformation-induced or twinning-induced plasticity in this class of high-entropy alloys and a design guide for controlling the physics at the electronic level.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗