Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SOLAR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

A simulation of convective dynamo in the solar convective envelope: Maintenance of the solar-like differential rotation and emerging flux

We report the results of a magnetohydrodynamic (MHD) simulation of a convective dynamo in a model solar convective envelope driven by the solar radiative diffusive heat flux. The convective dynamo produces a large-scale mean magnetic field that exhibits irregular cyclic behavior with oscillation time scales ranging from about 5 to 15 yr and undergoes irregular polarity reversals. The mean axisymmetric toroidal magnetic field is of opposite signs in the two hemispheres and is concentrated at the bottom of the convection zone. The presence of the magnetic fields is found to play an important role in the self-consistent maintenance of a solar-like differential rotation in the convective dynamo model. Without the magnetic fields, the convective flows drive a differential rotation with a faster rotating polar region. In the midst of magneto-convection, we found the emergence of strong super-equipartition flux bundles at the surface, exhibiting properties that are similar to emerging solar active regions.

79 ASTRONOMY AND ASTROPHYSICS↗

Using the standard solar model to constrain solar composition and nuclear reaction 𝑆 factors

While standard solar model (SSM) predictions depend on approximately 20 input parameters, SSM neutrino flux predictions are strongly correlated with a single model output parameter, the core temperature 𝑇 𝑐 . Consequently, one can extract physics from solar neutrino flux measurements while minimizing the consequences of SSM uncertainties, by studying flux ratios with appropriate power-law weightings tuned to cancel this 𝑇 𝑐 dependence. Here, we reexamine an idea for constraining the primordial C + N content of the solar core from a ratio of CN-cycle 15 O to pp-chain 8 B neutrino fluxes, showing that non-nuclear SSM uncertainties in the ratio are small and effectively governed by a single parameter, the diffusion coefficient. We point out that measurements of both CN-I cycle neutrino branches— 15 O and 13 N 𝛽-decay—could, in principle, lead to separate determinations of the core C and N abundances, due to out-of-equilibrium CN-cycle burning in the cooler outer layers of the solar core. Lastly, we show that the strategy of constructing “minimum uncertainty” neutrino flux ratios can also test other properties of the SSM. In particular, we demonstrate that a weighted ratio of 7 Be and 8 B fluxes constrains a product of S-factors to the same precision currently possible with laboratory data.

Serenelli, Aldo↗

New Limits on Bosonic Dark Matter, Solar Axions, Pauli Exclusion Principle Violation, and Electron Decay from the Majorana Demonstrator

Here, we present new limits on exotic keV-scale physics based on 478 kg d of Majorana Demonstrator commissioning data. Constraints at the 90% confidence level are derived on bosonic dark matter (DM) and solar axion couplings, Pauli exclusion principle violating (PEPV) decay, and electron decay using monoenergetic peak signal limits above our background. We set our most stringent DM constraints for 11.8 keV mass particles, limiting g A e < 4.5 × 10 -13 for pseudoscalars and ( α ' / α ) < 9.7 × 10 -28 for vectors. We also report a 14.4 keV solar axion coupling limit of g$eff\atop{AN}$ × g A e < 3.8 × 10 -17 , a 1/2 β 2 < 8.5 × 10 - 48 limit on the strength of PEPV electron transitions, and a lower limit on the electron lifetime of τ e > 1.2 × 1 0 24 yr for e - → invisible.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Structural Considerations for Solar Installers: An approach for small, simplified solar installations or retrofits

Structural Considerations for Solar Installers provides a comprehensive outline of structural considerations associated with simplified solar installations and recommends a set of best practices installers can follow when assessing such considerations. Information in the manual comes from engineering and solar experts as well as case studies. The objectives of the manual are to ensure safety and structural durability for rooftop solar installations and to potentially accelerate the permitting process by identifying and remedying structural issues prior to installation. The purpose of this document is to provide tools and guidelines for installers to help ensure that residential photovoltaic (PV) power systems are properly specified and installed with respect to the continuing structural integrity of the building.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Machine Learning for Solar Accessibility: Implications for Low-Income Solar Expansion and Profitability

The solar industry in the US typically uses a credit score such as the FICO score as an indicator of consumer utility payment performance and credit worthiness to approve customers for new solar installations. Using data on over 800,000 utility payment performance and over 5,000 demographic variables, we compare machine learning and econometric models to predict the probability of default to credit-score cutoffs. Here, we compare these models across a variety of measures, including how they affect consumers of different socio-economic backgrounds and profitability. We find that a traditional regression analysis using a small number of variables specific to utility repayment performance greatly increases accuracy and LMI inclusivity relative to FICO score, and that using machine learning techniques further enhances model performance. Relative to FICO, the machine learning model increases the number of low-to-moderate income consumers approved for community solar by 1.1% to 4.2% depending on the stringency used for evaluating potential customers, while decreasing the default rate by 1.4 to 1.9 percentage points. Using electricity utility repayment as a proxy for solar installation repayment, shifting from a FICO score cutoff to the machine learning model increases profits by 34% to 1882% depending on the stringency used for evaluating potential customers.

Davuluri, Sruthi↗

ROTATION PERIODS FOR COOL STARS IN THE 4 Gyr OLD OPEN CLUSTER M67, THE SOLAR–STELLAR CONNECTION, AND THE APPLICABILITY OF GYROCHRONOLOGY TO AT LEAST SOLAR AGE

We report rotation periods for 20 cool (FGK) main sequence member stars of the 4 Gyr-old open cluster M67 (=NGC 2682), obtained by analyzing data from Campaign 5 of the K2 mission with the Kepler Space Telescope . The rotation periods delineate a sequence in the color–period diagram (CPD) of increasing period with redder color. This sequence represents a cross-section at the cluster age of the surface P = P ( t , M ), suggested in prior work to extend to at least solar age. The current Sun is located marginally (approximately 1 σ ) above M67 in the CPD, as its relative age leads us to expect, and lies on the P = P ( t , M ) surface to within measurement precision. We therefore conclude that the solar rotation rate is normal as compared with cluster stars, a fact that strengthens the solar–stellar connection. The agreement between the M67 rotation period measurements and prior predictions further implies that rotation periods, especially when coupled with appropriate supporting work such as spectroscopy, can provide reliable ages via gyrochronology for other similar FGK dwarfs from the early main sequence to solar age and likely until the main sequence turnoff. The M67 rotators have a rotational age of 4.2 Gyr with a standard deviation of 0.7 Gyr, implying that similar field stars can be age-dated to precisions of ∼17%. The rotational age of the M67 cluster as a whole is therefore 4.2 Gyr, but with a lower (averaged) uncertainty of 0.2 Gyr.

79 ASTRONOMY AND ASTROPHYSICS↗

Solar wind rare gas analysis: Trapped solar wind helium and neon in Surveyor 3 material

The He-4 and Ne-20 contents in sections of the Surveyor 3 support strut samples were determined by optical and scanning electron microscopy and are compared to the results of the Apollo solar wind composition (SWC) experiments. The He-4/Ne-20 ratio in the samples from the sunlit side of the strut was approximately 300; the ratios determined in Apollo 12 lunar fines and SWC foil were below 100. The He-4/He-3 ratios were also determined, and the ratio obtained from Surveyor 3 material is higher than those found with Apollo 11 and 12 SWC experiments. The effects of spallation by cosmic rays or solar protons, stripping by cosmic ray or energetic solar alpha particles, recycling of solar wind He and radiogenic Ne, He from terrestrial atmosphere, mass discrimination near the moon, mass dependence of trapping probability, diffusion, and contamination by lunar dust are considered.

Buehler, F.↗

The solar wind near the sun - The solar envelope.

Recent observational data and models for the structure of the solar envelope are discussed, with emphasis on those physical processes in the envelope which are decisive in determining solar wind states at 1 AU. Diffusion of relativistic solar flare protons, collisionless damping of a variable flux of hydromagnetic waves, heat transfer from electrons to protons, acceleration by Alfven waves, and magnetic field effects are examined from the viewpoint of possible contributions to solar wind behavior.

Burlaga, L. F.↗

Solar array study for solar electric propulsion spacecraft for the Encke rendezvous mission

The work is described which was performed on the design, analysis and performance of a 20 kW rollup solar array capable of meeting the design requirements of a solar electric spacecraft for the 1980 Encke rendezvous mission. To meet the high power requirements of the proposed electric propulsion mission, solar arrays on the order of 186.6 sq m were defined. Because of the large weights involved with arrays of this size, consideration of array configurations is limited to lightweight, large area concepts with maximum power-to-weight ratios. Items covered include solar array requirements and constraints, array concept selection and rationale, structural and electrical design considerations, and reliability considerations.

Sequeira, E. A.↗

Solar flare particles - Energy-dependent composition and relationship to solar composition

Plastic and glass track detectors on rockets and Apollo spacecraft have been used to determine the composition of particles from He to Ni at energies from 0.1 to 50 MeV per nucleon in several solar flares of widely varying intensities. At low energies the composition of solar particles is enriched in heavy elements by an amount, relative to the asymptotic high-energy composition, that increases with atomic number from Z = 2 up to at least Z = 50, that decreases with energy, and that varies from flare to flare. At high energies (usually beyond an energy of 5 to 20 MeV per nucleon) the composition becomes independent of energy and, though somewhat variable from flare to flare, approximates the composition of the solar atmosphere. A table of abundances of the even-Z elements from He to Ni (plus N) in solar particles is constructed by averaging the asymptotic high-energy abundances in several flares.

Crawford, H. J.↗

Flat-plate solar-collector performance evaluation with a solar simulator as a basis for collector selection and performance prediction

This paper reports the measured thermal efficiency and evaluation of 23 collectors which differ according to absorber material (copper, aluminum, steel), absorber coating (nonselective black paint, selective copper oxide, selective black nickel, selective black chrome), type of glazing material (glass, Tedlar, Lexan, anti-reflection glass), the use of honeycomb material and the use of vacuum to prevent thermal convection losses. The collectors are given performance rankings based on noon-hour solar conditions and all-day solar conditions. The determination with the simulator of an all-day collector performance is made possible by tests at different incident angles. The solar performance rankings are made based on whether the collector is to be used for pool heating, hot water, absorption air conditioning, heating, or for a solar Rankine machine.

Simon, F. F.↗

A possible correlation between maxima of the far ultraviolet solar irradiance and central meridian passages of solar magnetic sector boundaries

Satellite observations of the sun over almost 5 yrs show that principally two UV active longitudes have persisted over a significant portion of this observational period. A comparison between the position of solar magnetic sector boundaries and UV enhancements of the sun seems to show, at least during the year 1969, that the UV maxima tend to occur near the times when a solar sector boundary is near central meridian. An estimate of the magnitude of the variable UV solar energy input into the atmosphere resulting from the rotation of active solar longitudes is that for wavelengths less than 175 nm and down to H Lyman-alpha it exceeds the annual variation, whereas at longer wavelengths it is less.

Heath, D. F.↗

Solar seismology. I - The stability of the solar p-modes

The stability of the radial p-modes of the sun is investigated by computing nonadiabatic eigenvalues and eigenfunctions for a solar envelope model which extends from an inner radius of about 0.3 solar radius out to an optical depth of about 0.0003. The calculations take into account in a crude fashion the response of the convective flux to the oscillation. The dynamical effect of turbulence in the convection zone is parametrized in terms of a turbulent shear viscosity. The results show that if damping by turbulent viscosity is neglected, all modes with periods longer than 6 minutes are unstable. The familiar kappa-mechanism, which operates in the H ionization-H(-) opacity region, is the dominant source of driving of the oscillations. Modes with periods shorter than 6 minutes are stabilized by radiative damping in the solar atmosphere. When turbulent dissipation of pulsational energy is included, all modes are predicted to be stable. However, the margin of stability is very small. In view of the large uncertainty that must be assigned to the estimate of turbulent damping, it is concluded that theoretical calculations cannot unequivocally resolve the question of the stability of the solar p-modes.

Goldreich, P.↗

Verification test of the MSFC solar simulator using a Honeywell double-covered liquid solar collector

Additional verification data to support the utilization of the MSFC Solar Simulator for testing solar collectors was obtained. The Honeywell double-covered liquid solar collector number 2 for which thermal performance data under natural outdoor conditions had been previously obtained was installed on the Solar Simulator and subjected to a series of eight tests under various conditions of wind flow rate. Although these test conditions were not absolutely identical to those of the outdoor tests, they are considered to be sufficiently representative to provide a basis for an accurate comparative analysis of the data recorded for both test programs.

Shih, K., Sr.↗

Preliminary design package for solar collector and solar pump

A solar-operated pump using an existing solar collector, for use on solar heating and cooling and hot water systems is described. Preliminary design criteria of the collector and solar-powered pump is given including: design drawings, verification plans, and hazard analysis.

Source record↗

Solar power satellites - Heat engine or solar cells

A solar power satellite is the energy-converting element of a system that can deliver some 10 GW of power to utilities on the earth's surface. We evaluated heat engines and solar cells for converting sunshine to electric power at the satellite. A potassium Rankine cycle was the best of the heat engines, and 50 microns thick single-crystal silicon cells were the best of the photovoltaic converters. Neither solar cells nor heat engines had a clear advantage when all factors were considered. The potassium-turbine power plant, however, was more difficult to assemble and required a more expensive orbital assembly base. We therefore based our cost analyses on solar-cell energy conversion, concluding that satellite-generated power could be delivered to utilities for around 4 to 5 cents a kWh.

Oman, H.↗