Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SEM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

High quality transmission Kikuchi diffraction analysis of deformed alloys - Case study

Modern scanning electron microscopes (SEM) equipped with thermally assisted field emission guns (Schottky FEG) are capable of imaging with a resolution in the range of several nanometers or better. Simultaneously, the high electron beam current can be used, which enables fast chemical and crystallographic analysis with a higher resolution than is normally offered by SEM with a tungsten cathode. The current resolution that limits the EDS and EBSD analysis is related to materials' physics, particularly to the electron-specimen interaction volume. The application of thin, electron-transparent specimens, instead of bulk samples, improves the resolution and allows for the detailed analysis of very fine microstructural features. Beside the typical imaging mode, it is possible to use a standard EBSD camera in such a configuration that only transmitted and scattered electrons are detected. This modern approach was successfully applied to various materials giving rise to significant resolution improvement, especially for the light element magnesium based alloys. This paper presents an insight into the application of the transmission Kikuchi diffraction (TKD) technique applied to the most troublesome, heavily-deformed materials. In particular, the values of the highest possible acquisition rates for high resolution and high quality mapping were estimated within typical imaging conditions of stainless steel and magnesium-yttrium alloy. - Highlights: •Monte Carlo simulations were used to simulate EBSD camera intensity for various measuring conditions. •Transmission Kikuchi diffraction parameters were evaluated for highly deformed, light and heavy elements based alloys. •High quality maps with 20 nm spatial resolution were acquired for Mg and Fe based alloys. •High speed TKD measurements were performed at acquisition rates comparable to the reflection EBSD.

36 MATERIALS SCIENCE↗

Sample preparation methods for scanning electron microscopy of homogenized Al-Mg-Si billets: A comparative study

Characterization of Mg-Si precipitates is crucial for optimizing the homogenization heat treatment of Al-Mg-Si alloys. Although sample preparation is key for high quality scanning electron microscopy imaging, most common methods lead to dealloying of Mg-Si precipitates. In this article we systematically evaluate different sample preparation methods: mechanical polishing, etching with various reagents, and electropolishing using different electrolytes. We demonstrate that the use of a nitric acid and methanol electrolyte for electropolishing a homogenized Al-Mg-Si alloy prevents the dissolution of Mg-Si precipitates, resulting in micrographs of higher quality. This preparation method is investigated in depth and the obtained scanning electron microscopy images are compared with transmission electron micrographs: the shape and size of Mg-Si precipitates appear very similar in either method. The scanning electron micrographs allow proper identification and measurement of the Mg-Si phases including needles with lengths of roughly 200 nm. These needles are β″ precipitates as confirmed by high resolution transmission electron microscopy. - Highlights: •Secondary precipitation in homogenized 6xxx Al alloys is crucial for extrudability. •Existing sample preparation methods for SEM are improvable. •Electropolishing with nitric acid/methanol yields superior quality in SEM. •The obtained micrographs are compared to TEM micrographs.

36 MATERIALS SCIENCE↗

Hardness and modulus of Fe2B, Fe3(C,B), and Fe23(C,B)6 borides and carboborides in the Fe-C-B system

Highlights: • Hardness and modulus of the Fe{sub 2}B, Fe{sub 3}(C,B), Fe{sub 23}(C,B){sub 6} and M{sub 7}C{sub 3} phases are analyzed. • Hardness and modulus of the Fe{sub 3}(C,B) phase are increasing with its B content. • Size effects are apparent for hardness of Fe{sub 2}B, Fe{sub 3}(C,B), Fe{sub 23}(C,B){sub 6} and M{sub 7}C{sub 3}. • The model of Nix and Gao was used to evaluate the load-independent hardness H{sub 0}. • Hardness ranking is Fe{sub 2}B > M{sub 7}C{sub 3} > Fe{sub 3}(C,B) > Fe{sub 23}(C,B){sub 6} - Abstract: This work provides a comparative and comprehensive study of the indentation hardness and indentation modulus of iron-rich borides and carboborides of types Fe{sub 2}B, Fe{sub 3}(C,B), and Fe{sub 23}(C,B){sub 6}. In addition, the hardness and elastic modulus of Cr-rich M{sub 7}C are investigated for comparative purposes. We investigated the impact of increasing B content and indentation size effect (ISE). The phases of interest were stabilized in cast Fe-C-B alloys that varied with respect to the B / (B + C) ratio and heat treatment. The resulting microstructures were characterized by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), and wavelength X-ray spectroscopy (WDS). Dynamic in-situ nanoindentation experiments based on the method of continuous stiffness measurement (CSM) were coupled to SEM and EBSD investigations to determine the mechanical properties of the individual borides and carboborides as a function of the indentation depth. The results were compared to values obtained for the Cr-rich M{sub 7}C{sub 3} carbide. It was found that the hardness of the B-rich Fe{sub 3}(C{sub ,}B) phase is considerably higher than pure Fe{sub 3}C and increases with increasing B content. The ISE was present in all investigated phases, and the hardness decreased as a function of indentation depth. The hardness at infinite indentation depth H{sub 0} was estimated according to the model of Nix and Gao. The Fe{sub 2}B phase was found to be the hardest phase (H{sub 0} = 19.04 GPa), followed by M{sub 7}C{sub 3} (H{sub 0} = 16.43 GPa), Fe{sub 3}(C,B) (H{sub 0} = 11.18 to 12.24 GPa), and Fe{sub 23}(C,B){sub 6} (H{sub 0} = 10.39 GPa).

36 MATERIALS SCIENCE↗

Pulsed laser powder bed fusion additive manufacturing of A356

Highlights: • Dense A356 specimens (98 ± 0.4%) were fabricated using a customized P-LPBF system. • Microstructure and grain morphology were examined using LOM, SEM, and EBSD. • Solidification front velocities (R) were evaluated through the KGT model. • A columnar grain structure was observed and predicted by the Hunt's criterion. - Abstract: A356 (Al7SiMg) specimens were fabricated through pulsed laser powder bed fusion (P-LPBF) additive manufacturing. Microstructural examinations and analyses were carried out through the usage of light optical microscopy (LOM), scanning electron microscopy (SEM), and electron backscatter diffraction (EBSD). The results revealed a fine cellular microstructure with the intercellular network consisting of Al cells and defined by a network of Si arms. The Al cells at the center of the melt pools and within the melt pool boundary bands were measured to be 423 ± 49 nm and 664 ± 76 nm, respectively. The presence of a fine columnar grain structure and epitaxial growth on partially melted grains was observed and explained by the KGT model and Hunt's criterion.

36 MATERIALS SCIENCE↗

Effect of equal channel angular pressing on the mechanical and tribological behavior of Al-Zn-Mg-Cu alloy

Highlights: • The correlation of microstructure, mechanical and wear properties has been studied. • The correlation between tensile properties and shear properties has been also studied. • Mechanical and tribological properties have been improved through the ECAP process of the Al-7075 alloy. • The dominant wear mechanisms in the initial material were adhesive and oxidative wear as well as delamination. • Abrasive and oxidative wear were the dominant wear mechanisms in ECAP processed specimens. - Abstract: Microstructure, mechanical properties and wear behavior of severely deformed Al-7075 alloy by equal channel angular pressing (ECAP) were studied. Microhardness, tensile and shear strength tests were performed to evaluate the mechanical properties of the material. The relationship between tensile and shear strength was also extracted. In addition, with the aim of study the wear behavior, the wear tests were performed by using a pin-on-disk machine under different normal loads. The microscopic observations i.e. transmission electron microscopy (TEM) and scanning electron microscope (SEM), were used to analyze the microstructure of specimens as well as the surface, subsurface and debris of worn specimens. Mechanical properties results showed that the hardness and strength (tensile and shear) of the ECAP-processed alloy were higher than that of the annealed alloy and increased with the increment of pass number. The wear test data revealed that the wear rate and friction coefficient decreased with increasing ECAP passes. The SEM analysis of worn specimens demonstrated that the dominant wear mechanisms of the annealed alloy were adhesion wear and delamination and the dominant wear mechanisms of ECAP processed alloy were abrasive wear and plowing bands. Oxidative wear was also observed at both annealed and ECAPed alloy. Totally, these results demonstrated that ultrafine-grained structure fabricated by ECAP, improves the wear resistance of the Al-7075 alloy.

36 MATERIALS SCIENCE↗

The influence of deposition conditions and bilayer thickness on physical-mechanical properties of CA-PVD multilayer ZrN/CrN coatings

Highlights: • Multilayer ZrN/CrN coatings were deposited using Arc-PVD AISI321 steel substrates. • Structure, elemental and phase composition, and mechanical properties were studied. • Presence of face-centered cubic ZrN, CrN and hexagonal Cr{sub 2}N phases were detected. • All samples were heated up to 1400 °C in argon to understand thermal behavior. • Enhancement of microhardness was observed at lower values of bilayer thickness. - Abstract: ZrN/CrN multilayers have been produced by a cathodic arc technique (CA-PVD) using different depositions conditions. Microstructural and mechanical characterizations of the coatings were performed by X-ray diffraction (XRD), scanning electron microscopy with energy dispersive spectroscopy (SEM with EDS), transmission electron microscopy (TEM), and Vickers microhardness tests. Variations in thermal transformation properties due to heating within the temperature range from 30 °C to 1400 °C were studied by differential scanning calorimetry (DSC) measurements. SEM and TEM observations showed that the coatings comprise a multilayered structure with nanometric grains. EDS spectra confirmed the formation of stoichiometric composition. Near-to-super stoichiometric nitrides can be suggested in certain specimens. Results of the XRD analysis revealed that the (200) and (111) planes for ZrN and Cr{sub 2}N are the most intense. Calorimetric tests showed that below a certain annealing temperature no transformations were defined. 1180 °C was found to be the value where only one-stage state transformation, presented by endothermic or exothermic reactions, took place. The highest hardness (4685HV0.025) was obtained for the coating with Λ = 140 nm, P{sub N} = 0.43 Pa, U{sub S} = −70 V.

36 MATERIALS SCIENCE↗

Cyclic plastic deformation behaviour of a directionally solidified nickel base superalloy at 850 °C: Damage micromechanisms

Highlights: • Isothermal LCF life of CM 247 DS is reduced using R = 0 instead of R = −1. • Reduction in LCF life is significant at lower values of Δε/2. • Reduction in fatigue life is attributed to the development of sustained mean stress. • Sustained mean stress prevents the slip transfer from γ-channels to γ′-precipitates. • Sustained mean stress promotes dislocation network formation and looping. - Abstract: Dislocation based deformation micromechanisms during low cycle fatigue deformation of nickel base superalloy CM 247 DS LC at 850 °C was investigated by conducting fatigue tests employing constant strain amplitudes for strain ratio (R) values of 0, −1 and carrying out extensive SEM and TEM examinations. Cyclic life of the alloy reduces for all fatigue tests conducted employing R = 0 in comparison with R = −1 owing to sustained mean stress developed during fatigue at R = 0. TEM examinations confirmed that sustained mean stress developed during low strain amplitude fatigue test (Δε/2 = 0.5%) using R = 0 condition prevented slip transfer from γ-channels to γ′-precipitates and resulted in the formation of dislocation substructures such as networks, nodes etc. and also promoted dislocation looping around γ′-precipitates. Lower fatigue life at R = 0 is mainly attributed to the development of these types of substructures, which promotes strain localization in both intra as well intergranular regions. Whereas, in specimen fatigue tested (Δε/2 = 0.5%) using R = −1 condition, shearing of γ′-precipitates by APB coupled dislocation and formation of stacking faults were observed. The formation and nature of stacking faults were analysed using weak beam imaging technique. Stacking fault formed during fatigue tests using R = −1 condition matured to micro-twins when Δε/2 value was increased to 0.8%. The mechanism of formation of these microtwins is discussed in detail. SEM based microstructural and fractographic examinations revealed that mean stress induced creep effect resulted in intergranular crack initiation and grain boundary cavitation during fatigue tests under R = 0 condition and therefore verified the facts revealed in TEM studies.

36 MATERIALS SCIENCE↗

Automated correlative segmentation of large Transmission X-ray Microscopy (TXM) tomograms using deep learning

Highlights: • A unique automated segmentation approach for large 3D nanotomography datasets obtained by Transmission X-ray Microscopy (TXM) in an Al-Cu alloy. • Automated segmentation using a Convolutional Neural Network (CNN) architecture based on a deep learning approach was employed. • This extremely versatile technique is capable of emulating the manual segmentation process effectively. • Quantitative comparison between manual segmentation and CNN architecture established the accuracy of this automated technique. • Its ability to robustly process ultra-large volumes of data in relatively small time frames can exponentially accelerate tomographic data analysis. - Abstract: A unique correlative approach for automated segmentation of large 3D nanotomography datasets obtained using Transmission X-ray Microscopy (TXM) in an Al-Cu alloy has been introduced. Automated segmentation using a Convolutional Neural Network (CNN) architecture based on a deep learning approach was employed. This extremely versatile technique is capable of emulating the manual segmentation process effectively. Coupling this technique with post-scanning SEM imaging ensured precise estimation of 3D morphological parameters from nanotomography. The segmentation process as well as subsequent analysis was expedited by several orders of magnitude. Quantitative comparison between segmentation performed manually and using the CNN architecture established the accuracy of this automated technique. Its ability to robustly process ultra-large volumes of data in relatively small time frames can exponentially accelerate tomographic data analysis, possibly opening up novel avenues for performing 4D characterization experiments with finer time steps.

36 MATERIALS SCIENCE↗

Secondary carbides in high chromium cast irons: An alternative approach to their morphological and spatial distribution characterization

Highlights: • Systematic characterization of second phase particles by combining a variety of techniques • Comparison of morphological parameters obtained from SEM, BSE, etching+CLSM and EBSD • Quantitative analysis and degree of distribution of secondary carbides • Particle size, distribution and morphology from image analysis of CLSM, SEM and EBS images - Abstract: Secondary carbides precipitated in high chromium cast irons during thermal treatments were characterized by means of different characterization techniques, including scanning electron microscopy, energy dispersive X-ray spectroscopy, electron backscattered diffraction and a combination of chemical etching with confocal scanning laser microscopy. This set of techniques provides a full morphological, chemical and crystallographic description of the analysed phases. This work evaluated different methods for optimizing the image acquisition for a further image analysis (IA) based on the threshold binarization. Finally, the carbide size, distribution and morphology were determined after IA of the images acquired by aforementioned characterization techniques. Although the different techniques report some dispersion in the value for the average particle size, the particle inter-spacing and aspect ratio meet within the error value. The proposed characterization methodology provides statistically reliable data for a further evaluation of related physical properties in composites.

36 MATERIALS SCIENCE↗

Dynamic recrystallization kinetics and microstructure evolution of an AZ91D magnesium alloy during hot compression

Highlights: • DRX kinetic model is developed for the aged AZ91D magnesium alloy. • The DRX behavior in different strained regions was investigated. • Four morphologies of the second phase were proposed during the hot compression tests. • The nucleation mechanisms of the DRX grains were clarified. - Abstract: The flow behavior of as-cast AZ91D magnesium alloy was evaluated by isothermal compression tests within the temperatures of 220 °C, 260 °C, 300 °C, 340 °C, and 380 °C, and the strain rates of 0.001, 0.01, 0.1, 1 and 10s{sup −1}. Based on the stress-strain curve and hyperbolic sine function, the thermal activation energy and the strain rate sensitivity of the material were determined to be 142.2726 kJ·mol{sup −1} and 0.142, respectively. The S type evolution of the dynamic recrystallization with the increasing strain that dynamic recrystallization (DRX) model obtained from stress and strain data. There was a good consistency between the proposed DRX kinetics model and microstructure observation results. Combining isothermal compression specimens with finite element and scanning electron microscopy (SEM) analysis indicated that the sample can be divided into rarely recrystallized region, partially recrystallized region and completely recrystallized region, which falls within the dense deformation zone, free deformation zone and severe deformation zone, respectively. The different forms of the β-Mg{sub 17}Al{sub 12} phase induced by compression tests were confirmed by SEM. Nucleation mechanisms of the DRX were discussed with reference to the transmission electron microscope (TEM) analysis results.

36 MATERIALS SCIENCE↗

Advanced processing of EBSD data to distinguish the complex microstructure evolution of a Cu-Ni-Si alloy induced by fatigue

Highlights: • Microstructure investigation of the fatigue behaviour of a Cu-Ni-Si alloy • Use of ECCI and EBSD to investigate the microstructure evolution related to fatigue dislocations structures • Characterisation of local plastic accommodation through EBSD misorientation criteria - Abstract: The present work aims at identifying the evolution of the microstructure of a Cu-Ni-Si (Corson alloy) alloy after low cycle fatigue by means of advanced electron microscopy analysis techniques (SEM-ECCI, Orientation Imaging Microscopy by means of SEM-EBSD and TEM). Deep attention is paid on the material subjected to high cyclic strains where a transient cellular dislocation structure transformed into precipitate free bands. It is shown that the formation of dislocation cells leads to a high GROD and high GOSaera value and its standard deviation. However, the presence of precipitate free bands results in the low GOSarea level and its low standard deviation.

36 MATERIALS SCIENCE↗

Development of pore-free Ti-Al-C MAX/Al-Si MMC composite materials manufactured by squeeze casting infiltration

Highlights: • Open-porous MAX phase preforms were synthesized by Microwave Assisted Self-propagating High-temperature Synthesis • Manufactured preforms were infiltrated by Al-Si alloy with the use of Squeeze Casting method to create pore-free composites • Obtained materials were characterized by the means of SEM, TEM and XRD analyses • Mechanical properties were tested and discussed in relation to the microstructures An innovative method of manufacturing of Ti-Al-C MAX/Al-Si MMC composite materials was developed using squeeze casting infiltration of open-porous MAX phase preforms. Self-propagating High-temperature Synthesis (SHS) in microwave-assisted mode was applied for the creation of preforms in the Ti-Al-C system, that were subsequently infiltrated with Al-Si alloy to create dense composite materials. Microstructure and phase composition, structural defects and potential impacts between constituents of manufactured composites were characterized by the means of SEM and TEM microscopies and XRD analysis. No undesired reaction at the interface was observed, but TiC inclusions were identified in the material. Among the mechanical properties, the instrumental Young's modulus and Vickers hardness were established. The hardness and the elastic modulus of the matrix were enhanced 4 to 5 times. Wear behaviour was tested with a “pin-on-flat” method with the reciprocating motion for different load values (0.1, 0.2 and 0.5 MPa) for tool steel counterpart. Wear resistance of the composite material (WR = 1.6–2.3 × 10{sup −4} mm{sup 3}/Nm) was twofold higher than for the sole matrix (WR = 3.5–4.8 × 10{sup −4} mm{sup 3}/Nm). The developed manufacturing method allows the effective fabrication of pore-free MAX phase based MMC composite materials, with significantly higher wear resistance than the widely applied Al-Si alloys.

36 MATERIALS SCIENCE↗

A melting-like process and the local structures during the anatase-to-rutile transition

Highlights: • The maximum size of anatase crystallites is more useful to describe the phase stability than the traditional critical size. • The melting-like process accelerates the phase transition from anatase to rutile. • The cis-coordinated anatase is transformed to trans-coordinated rutile by torsion & rotation of TiO{sub 6} octahedra in anatase. Phase transition of titanium oxide from anatase to rutile was investigated by using transmitted electron microscope (TEM), scanning electron microscope (SEM) and X-ray diffraction (XRD), in combination with the atomic pair distribution function (PDF) technique. The transition range is about 528–805 °C and the critical size is ~73 nm for the sol-gel samples calcined for 6 h. A melting-like process was evidently observed in the transition samples by SEM and it will speed up the phase transition. PDF reveals that anatase crystallites are packed by neighbouring TiO{sub 6} octahedra in a cis-coordinated way. Anatase crystallites larger than the critical size will be unstable and transform into rutile in a trans-coordinated way by torsion and rotation of part of octahedra and it will rapidly spread the entire crystallites driven by a melting-like process. We suggest the maximum size of anatase will be more technically useful for the description of the phase stability from anatase to rutile because unstable small anatase crystals are consumed during longer calcination process to grow the larger anatase crystals.

36 MATERIALS SCIENCE↗

Microscopy modality transfer of steel microstructures: Inferring scanning electron micrographs from optical microscopy using generative AI

Scanning electron microscopy (SEM) is resource intensive, which limits its throughput in some applications. As an alternative, we propose applying computer vision and machine learning to generate high-quality synthetic SEM micrographs from micrographs obtained using light optical microscopy (LOM). Working with a correlated LOM/SEM dataset of dual-phase steel images, we test generative models of various architectures, including encoder-decoder networks, generative adversarial networks (GANs), and diffusion-based models. We find that the diffusion models significantly outperform other methods on both qualitative and quantitative assessments, while preserving key metallurgical meaning. This work establishes diffusion as the state-of-the-art for microscopy modality transfer and demonstrates the potential of AI-powered microscopy to enhance LOM with micron scale structural recreation.

Computer vision↗

Nondestructive ultrasonic characterization of a triple-weld-bead wire arc additively manufactured ER70S-6 S-curved wall

Understanding build-scale microstructural variation in wire arc additive manufacturing (WAAM) of low-carbon steels is essential for ensuring consistent structure–property relationships throughout large components. Conventional destructive characterization techniques, such as scanning electron microscopy (SEM) and electron backscatter diffraction (EBSD), are time-intensive and limited to localized regions, making comprehensive evaluation of large WAAM structures challenging. In this study, a nondestructive ultrasonic approach was employed to characterize a 252 mm tall ER70S-6 S-curved WAAM wall produced using a triple-bead deposition strategy. Optical and SEM analysis revealed a repeating dual-region microstructure consisting of uniform polygonal ferrite at melt pool centers and heterogeneous ferrite with coarse and fine grains near melt pool boundaries, attributed to cyclic thermal conditions. Longitudinal ultrasonic backscatter imaging was used to evaluate the continuity of this periodicity along the full build height. The ultrasonic response exhibited a consistent repeating pattern that correlated with the observed layer-wise microstructural variation. X-ray computed tomography confirmed the absence of detectable porosity, indicating that ultrasonic contrast is primarily governed by grain morphology. Overall, the results indicate that longitudinal backscatter ultrasound is a promising nondestructive characterization technique for validating microstructural variations along the s-curved WAAM wall, with significant potential for microstructure optimization and process control.

36 MATERIALS SCIENCE↗

Organic assisted hydrothermal route to MoO{sub 2}/HDA composite microspheres and their characterization

Synthesis of molybdenum oxide/hexadecylamine (MoO{sub 2}/HDA) microspheres in aqueous solution has been investigated systematically by varying the concentration of the precursor, surfactant and reducing agent, as well as the reaction temperature and duration. To understand this, the nature of the solid has been probed by PXRD, FTIR, UV-visible and SEM equipped with an EDS. The PXRD patterns of as-prepared products reveal that MoO{sub 2} microspheres are of monoclinic structure. The bands at 985 and 952 cm{sup -1} reflect the {nu}(Mo-O) stretch vibration of terminal -Mo{sup VI}=O{sub t} and -Mo{sup IV}=O{sub t} groups. UV-vis spectrum of calcined sample exhibits maximum absorption at 358 nm. SEM images reveal that the average diameters of the MoO{sub 2} microspheres are in the range 1-3 {mu}m. The reduction of the precursor yields a metastable poorly crystalline oxide of lower valence molybdenum, which is crystallized to {alpha}-MoO{sub 3} on calcination to 400 deg. C.

36 MATERIALS SCIENCE↗

A novel synthesis of micrometer silica hollow sphere

Silica microcapsules (hollow spheres) were synthesized successfully by a novel CTAB-stabilized water/oil emulsion system mediated hydrothermal method. The addition of urea to a solution of aqueous phase was an essential step of the simple synthetic procedure of silica hollow spheres, which leads to the formation of silica hollow spheres with smooth shell during hydrothermal process. The intact hollow spheres were obtained by washing the as-synthesized solid products with distilled water to remove the organic components. A large amount of silanol groups were retained in the hollow spheres by this facile route without calcination. The morphologies and optical properties of the product were characterized by transmission electron microscopy, scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy. Furthermore, on the basis of a series of SEM observations, phenomenological elucidation of a mechanism for the growth of the silica hollow spheres has been presented.

36 MATERIALS SCIENCE↗

Preparation and luminescence properties of Mn{sup 2+}-doped ZnGa{sub 2}O{sub 4} nanofibers via electrospinning process

One-dimensional Mn{sup 2+}-doped ZnGa{sub 2}O{sub 4} nanofibers were prepared by a simple and cost-effective electrospinning process. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric and differential thermal analysis (TG-DTA), scanning electron microscopy (SEM), energy-dispersive X-ray spectrum (EDS), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), photoluminescence (PL) and cathodoluminescence (CL) spectra as well as kinetic decays were used to characterize the samples. SEM results indicated that the as-formed precursor fibers and those annealed at 700 deg. C are uniform with length of several tens to hundred micrometers, and the diameters of the fibers decrease greatly after being heated at 700 deg. C. Under ultraviolet excitation (246 nm) and low-voltage electron beams (1-3 kV) excitation, the ZnGa{sub 2}O{sub 4}:Mn{sup 2+} nanofibers presents the blue emission band of the ZnGa{sub 2}O{sub 4} host lattice and the strong green emission with a peak at 505 nm corresponding to the {sup 4}T{sub 1}-{sup 6}A{sub 1} transition of Mn{sup 2+} ion.

36 MATERIALS SCIENCE↗