Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SEEDING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Fresh Slice Self-Seeding and Fresh Slice Harmonic Lasing at LCLS

We present results from the successful demonstration of fresh slice self-seeding at the Linac Coherent Light Source (LCLS).* The performance is compared with SASE and regular self-seeding at photon energy of 5.5 keV, resulting in a relative average brightness increase of a factor of 12 and a factor of 2 respectively. Following this proof-of-principle we discuss the forthcoming plans to use the same technique** for fresh slice harmonic lasing in an upcoming experiment. The demonstration of fresh slice harmonic lasing provides an attractive solution for future XFELs aiming to achieve high efficiency, high brightness X-ray pulses at high photon energies (>12 keV).***

Amann, J.W.↗

Minimum Spectral Bandwidth in Echo Seeded Free Electron Lasers

This paper examines the impact of non-linear longitudinal phase distortions on the spectral bandwidth in echo seeded free electron lasers (FELs). It extends the existing theory developed in Ref.~\cite{HemsingBunchingPhase} for echo-enabled harmonic generation (EEHG) to include finite laser pulse durations. An analytic expression for the shape of the optimized longitudinal bunching envelope is derived, and is used to determine the laser and electron beam pulse durations that minimize the seeded bandwidth in the presence of arbitrary phase distortions. The time-bandwidth product (TBP) is also derived, and is shown that the TBP and the bandwidth increase by no more than $\sqrt{2}$ from their transform-limited values when the bandwidth is minimized.

Hemsing, Erik↗

Generation of High Peak Power Hard X-Rays at LCLS-II with Double Bunch Self-seeding

We propose to use existing LCLS copper S-band linac double bunch infrastructure to significantly improve LCLS-II hard X-ray performance. In our setup, we use the first bunch to generate a strong seeding X-ray signal, and the second bunch, initially traveling off-axis, to interact with the seed in the amplifier undulator and generate a near TW, 15 fs duration X-ray pulse in the 4 to 8 keV photon energy range. We investigate, via numerical simulations, the required transverse beam dynamics and the four crystals X-ray monochromator to be added to the existing LCLS-II beamline and discuss the final properties of the hard X-ray pulses and their potential application in high intensity, high-field physics experiments, including QED above the Schwinger critical field.

Halavanau, A.↗

Increasing the content of long chain fatty acids in seed oil

Provided are plants that express, or overexpress, a pPLAIIIδ protein. Constitutive or seed-specific expression of pPLAIIIδ protein in Arabidopsis increases seed oil content, the amount of C20 and C22 fatty acids, and the amount of C56, C58, and C60 triacylglycerols, effectively resulting in significantly higher oil yield per plant. Use of pPLAIIIδ is therefore an effective biotechnological tool to significantly increase plant yield, including oil, and the amount of high value long chain fatty acids in agricultural and horticultural crops, especially oilseed crops.

Wang, Xuemin↗

Defect reduction in seeded aluminum nitride crystal growth

Bulk single crystal of aluminum nitride (AlN) having an areal planar defect density ≤100 cm−2. Methods for growing single crystal aluminum nitride include melting an aluminum foil to uniformly wet a foundation with a layer of aluminum, the foundation forming a portion of an AlN seed holder, for an AlN seed to be used for the AlN growth. The holder may consist essentially of a substantially impervious backing plate.

Bondokov, Robert T.↗

Defect reduction in seeded aluminum nitride crystal growth

Bulk single crystal of aluminum nitride (AlN) having an areal planar defect density≤100 cm−2. Methods for growing single crystal aluminum nitride include melting an aluminum foil to uniformly wet a foundation with a layer of aluminum, the foundation forming a portion of an AlN seed holder, for an AlN seed to be used for the AlN growth. The holder may consist essentially of a substantially impervious backing plate.

Bondokov, Robert T.↗

Increasing the content of long chain fatty acids in seed oil

Provided are plants that express, or overexpress, a pPLAIIIδ protein. Constitutive or seed-specific expression of pPLAIIIδ protein in Arabidopsis increases seed oil content, the amount of C20 and C22 fatty acids, and the amount of C56, C58, and C60 triacylglycerols, effectively resulting in significantly higher oil yield per plant. Use of pPLAIIIδ is therefore an effective biotechnological tool to significantly increase plant yield, including oil, and the amount of high value long chain fatty acids in agricultural and horticultural crops, especially oilseed crops.

Wang, Xuemin↗

Graphene nanoribbons grown from aromatic molecular seeds

Methods for the bottom-up growth of graphene nanoribbons are provided. The methods utilize small aromatic molecular seeds to initiate the anisotropic chemical vapor deposition (CVD) growth of graphene nanoribbons having low size polydispersities on the surface of a growth substrate. The aromatic molecular seeds include polycyclic aromatic hydrocarbons (PAHs), functionalized derivatives of PAHs, heterocyclic aromatic molecules, and metal complexes of heterocyclic aromatic molecules.

Arnold, Michael Scott↗

CeO{sub 2} nanocrystals: Seed-mediated synthesis and size control

This work reports on seed-mediated synthesis and size control of monodispersed CeO{sub 2} nanoparticles. CeO{sub 2} nanoparticles of mean size smaller than 2 nm were first prepared by a simple mixing of aqueous solution of cerium (IV) sulfate and ammonia solution at ambient conditions. Using these as-prepared fine particles as the tiny seeds, tunable sizes of CeO{sub 2} nanoparticles were achieved via a facile hydrothermal treatment. All samples were characterized by X-ray diffraction (XRD), infrared (IR) spectroscopy, UV-vis spectroscopy, and thermogravimetric analysis (TGA). It is shown that in comparison with other inorganic cerium salts such as cerium (III) nitrates, cerium (IV) sulfate appears more suitable for forming CeO{sub 2} nanoparticles at room temperature. Sulfate groups are strongly thermodynamically adsorbed on CeO{sub 2} nanoparticle surfaces. The formation mechanism, surface hydration and sulfation characteristics of the resulting CeO{sub 2} nanoparticles are also discussed.

36 MATERIALS SCIENCE↗

Improved conversion efficiency in dye-sensitized solar cells based on electrospun Al-doped ZnO nanofiber electrodes prepared by seed layer treatment

The application of electrospun nanofibers in electronic devices is limited due to their poor adhesion to conductive substrates. To improve this, a seed layer (SD) is introduced on the FTO substrate before the deposition of the electrospun composite nanofibers. This facilitates the release of interfacial tensile stress during calcination and enhances the interfacial adhesion of the AZO nanofiber films with the FTO substrate. Dye-sensitized solar cells (DSSC) based on these AZO nanofiber photoelectrodes have been fabricated and investigated. An energy conversion efficiency ({eta}) of 0.54-0.55% has been obtained under irradiation of AM 1.5 simulated sunlight (100 mW/cm{sup 2}), indicating a massive improvement of {eta} in the AZO nanofiber film DSSCs after SD-treatment of the FTO substrate as compared to those with no treatment. The SD-treatment has been demonstrated to be a simple and facile method to solve the problem of poor adhesion between electrospun nanofibers and the conductive substrate. -- Graphical abstract: The poor adhesion between electrospun nanofibers and substrate is improved by a simple and facile seed layer (SD) treatment. The energy conversion efficiency of AZO nanofiber-based DSSCs has been greatly increased by SD-treatment of the FTO substrate. Display Omitted Research highlights: {yields} A simple and facile method (SD-treatment) has been demonstrated. {yields} The poor adhesion between electrospun nanofibers and substrate is improved by the SD-treatment. {yields} The {eta} of AZO nanofiber-based DSSCs has been greatly improved by SD-treatment of the FTO substrate.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nanocomposite-seeded epitaxial growth of single-domain lithium niobate thin films for surface acoustic wave devices

A method for making LNO film, including the steps of identifying a substrate, identifying a deposition target, placing the substrate and deposition target in a deposition environment, evolving target material into the deposition environment, and depositing evolved target material onto the substrate to yield an LNO film. The deposition environment defines a temperature of between 500 degrees Celsius and 750 degrees Celsius and a pressure of about 10 −6 Torr. A seed or buffer layer may be first deposited onto the substrate, wherein the seed layer is about 30 mole percent gold and about 70 LiNbO 3 .

Wang, Haiyan↗

Speckle contrast from the split-and-delay unit with seeded X-ray pulses of the MID instrument at European XFEL

We report on the coherence properties and characteristics of the split- and-delay unit at the Materials Imaging and Dynamics instrument of the European XFEL under seeded-beam conditions. Our investigation focuses on the speckle contrast extracted from the scattering patterns from static scatterers and pulse splitting characteristics. Seeded-beam operation enabled a high throughput of the split-and-delay unit. We highlight the invaluable potential of the split-and-delay unit for experimental investigations for enhancing our understanding of ultrafast phenomena in molecular liquids, such as water and aqueous solutions.

Fuoss, Paul↗

Elevated resistance to insects and plant pathogens without compromising seed production

Described herein are modified plants, plant cells, and plant seeds that have at least one mutant loss-of-function JAZ gene and at least one loss-of-function cdk8 gene. Such plants are highly resistant to pests and environmental stress and have restored growth and increased seed yield compared to plant lines with a jazD genetic background.

Howe, Gregg A.↗

Echo-seeding options for LCLS-II

The success of LCLS has opened up a new era of x-ray sciences. An upgrade to LCLS is currently being planned to enhance its capabilities. In this paper we study the feasibility of using the echo-enabled harmonic generation (EEHG) technique to generate narrow bandwidth soft x-ray radiation in the proposed LCLS-II soft x-ray beam line. We focus on the conceptual design, the technical implementation and the expected performances of the echo-seeding scheme. We will also show how the echo-seeding scheme allows one to generate two color x-ray pulses with the higher energy photons leading the lower energy ones as is favored in the x-ray pump-probe experiments.

ACCPHY, XFEL↗

Researching Seeds: Films, Sanitation Methods, Microbiological Growth, Viability, and Selection for New Crops

A major factor in long-term human exploration of the solar system is crop growth in microgravity. Space crops can provide fresh, nutritious food to supplement diets for astronauts. Important factors impacting space plant growth and consumption are water delivery to root zone in microgravity, sanitation methods for microbiological safety, plant responses to light quality/spectrum, and identifying optimal edible plants suitable for growth on the International Space Station (ISS). Astronauts growing their own food on the ISS provides necessary data for crop production for long duration deep space missions. The seed film project can be used in Advanced Plant Habitat and Veggies that are currently being utilized on the ISS.

Plant Biology↗

A Mechanistic Study on the Formation of Silver Nanoplates in the Presence of Silver Seeds and Citric Acid or Citrate Ions

The world on a plate: In addition to their role as a capping agent that selectively binds to the {l_brace}111{r_brace} faces of silver, the carboxylate group can coordinate with Ag+ ions to form complexes and thus substantially reduce the reduction rate of Ag+ ions, leading to the formation of silver seeds with both twin planes and stacking faults.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synchrotron-based diffraction-enhanced imaging and diffraction-enhanced imaging combined with CT X-ray imaging systems to image seeds at 30 keV

Utilized the upgraded Synchrotron-based non-destructive Diffraction-enhanced imaging and Diffraction-enhanced imaging coupled with CT X-ray imaging systems to image the chickpea seeds, to enhance the contrast in plant root architecture, visibility of fine structures of root architecture growth and some aspects of physiology at acceptable level. DEI-CT images were acquired with 30 keV synchrotron X-rays. A series of DEI-CT slices were assembled together, to form a 3D data set. DEI-CT images explored more structural information and morphology. Noticed detailed anatomical, physiological observations, and contrast mechanisms. Furthermore, with these systems, some of the complex plant traits, root morphology, growth of laterals and subsequent laterals can be visualized directly.

36 MATERIALS SCIENCE↗