Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SAPPHIRE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Mapping the ionization state of laser-irradiated Ar gas jets with multiwavelength monochromatic x-ray imaging

Two-dimensional monochromatic images of fast-electron stimulated Ar K{alpha} and He-{alpha} x-ray self-emission have recorded a time-integrated map of the extent of Ar{sup {approx_equal}6+} and Ar{sup 16+} ions, respectively, within a high density (10{sup 20} cm{sup -3} atomic density) Ar plasma. This plasma was produced by irradiating a 2 mm wide clustering Ar gas jet with an ultrahigh intensity (10{sup 19} W/cm{sup 2}, 50 TW) Ti:sapphire laser operating at 800 nm. Spherically bent quartz crystals in the 200 (for K{alpha}) and 201 (for He-{alpha}) planes were used as near-normal incidence reflective x-ray optics. We see that a large (830 {mu}m long) region of plasma emits K{alpha} primarily along the laser axis, while the He-{alpha} emission is confined to smaller hot spot (230 {mu}m long) region that likely corresponds to the focal volume of the f/8 laser beam. X-ray spectra from a Bragg spectrometer operating in the von Hamos geometry indicate that the centroids of the K{alpha} and He-{alpha} emission regions are separated by approximately 330 {mu}m along the laser axis.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

GaN{sub 1-x}Bi{sub x}: Extremely mismatched semiconductor alloys

Through nonequilibrium low-temperature molecular beam epitaxy, we have grown GaN{sub 1-x}Bi{sub x} alloys on sapphire substrates with x up to 0.11. The GaN{sub 1-x}Bi{sub x} alloys are found to be amorphous with GaN crystals distributed throughout the film. A dramatic reduction in the optical band gap from 3.4 eV in GaN to as low as 1.2 eV for x{approx}0.11 was qualitatively explained by formation of a narrow band originating from anticrossing interaction between Bi localized states and the extended states of the GaN matrix.

36 MATERIALS SCIENCE↗

Effect of GaN interlayer on polarity control of epitaxial ZnO thin films grown by molecular beam epitaxy

Epitaxial ZnO thin films were grown on nitrided (0001) sapphire substrates with an intervening GaN layer by rf-plasma-assisted molecular beam epitaxy. It was found that polarity of the ZnO epilayer could be controlled by modifying the GaN interlayer. ZnO grown on a distorted 3-nm-thick GaN interlayer has Zn-polarity while ZnO on a 20-nm-thick GaN interlayer with a high structural quality has O-polarity. High resolution transmission electron microscopy analysis indicates that the polarity of ZnO epilayer is controlled by the atomic structure of the interface between the ZnO buffer layer and the intervening GaN layer.

36 MATERIALS SCIENCE↗

Nonlinear Mechanisms of Light Beam Absorption in Transparent Materials under High Power Laser Action

Analysis of nonlinear mechanisms of light beam absorption in transparent materials under high power and ultrashort pulses laser action is presented. The processes of nonlinear absorption and ablation of transparent materials (such as nitride semiconductor, sapphire and others) under terawatt/cm{sup 2}-laser irradiation with ultrashort pulses are considered. The values of ablation thresholds for different dielectrics are discussed. The threshold appears to grow approximately in proportion to the third power of the material energy bandgap. The model is based on the tunneling absorption under the irradiation by high-intensity ultrashort pulses. The theory of ionization of solids in a field of strong electromagnetic wave is used. The effect of the material energy bandgap on the laser ablation threshold s adequately explained.

36 MATERIALS SCIENCE↗

Effect of microstructure on Au/sapphire interfacial thermal resistance

We deposit Au films on single crystal sapphire substrates by sputtering and evaporation methods. The microstructure characteristics such as crystal textures, grain sizes, and fraction of contacted area of the films are examined by x-ray diffraction and transmission electron microscopy. The sputtered films have an average grain size of about 200 nm and perfectly attach to the substrates; the as-evaporated films partially attach to the substrate; the grain size varies from 10 to 30 nm, and after annealing, increases to 50 nm. Au{sub 2}Al phase is observed in the annealed samples. The interfacial thermal resistance is measured by a frequency domain thermoreflectance method. The thermal resistance of the sputtered Au/sapphire interfaces is 35.5x10{sup -9} m{sup 2} K W{sup -1}, and those of the evaporated samples are up to three times as large as this value. The change in interfacial thermal resistance is explained by the effect of detachment using a parallel arranged thermal resistance model, the effect of grain size, and the influence of chemical bonding at the interfaces.

36 MATERIALS SCIENCE↗

High Zn Content Single-phase RS-MgZnO Suitable for Solar-blind Frequency Applications

Single-phase rock-salt MgZnO films with high Zn content were successfully fabricated on the templates of MgO (111)/{alpha}-sapphire (0001) by radio-frequency plasma assisted molecular beam epitaxy. The influence of growth temperature on epitaxy of MgZnO alloy films was investigated by the combined studies of crystal structures, compositions, and optical properties. It is found that the incorporation of Zn atoms into the rock-salt MgZnO films is greatly enhanced at low temperature, confirmed by in-situ reflection high-energy electron diffraction observations and ex-situ X-ray diffraction characterization. Zn fraction in the single-phase rock-salt Mg{sub 0.53}Zn{sub 0.47}O film was determined by Rutherford backscattering spectrometry. Optical properties of the films were investigated by transmittance spectroscopy and reflectance spectroscopy, both of which demonstrate the solar-blind band gap and its dependence on Zn content.

36 MATERIALS SCIENCE↗

Ultrahigh Intensity Laser-Matter Interaction Studies at RRCAT, Indore

The Laser Plasma Division of the Raja Ramanna Centre for Advanced Technology (RRCAT), Indore has been engaged in research and development activities on laser plasma interaction using a 10 TW, 45 fs, Ti:sapphire laser and a variety of in-house developed diagnostic systems for ultrashort laser pulses, plasma, and x-ray radiation. Our recent studies include high order harmonic generation and optimization, laser driven electron acceleration, enhancement of x-ray yield in the water-window spectral region, ultrashort high brightness K-{alpha} x-ray generation, and MeV energy bremsstrahlung radiation. This paper briefly describes these studies and the important results obtained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Substrate orientation effects on the nucleation and growth of the M{sub n+1}AX{sub n} phase Ti{sub 2}AlC

The M{sub n+1}AX{sub n} (MAX) phases are ternary compounds comprising alternating layers of a transition metal carbide or nitride and a third ''A-group'' element. The effect of substrate orientation on the growth of Ti{sub 2}AlC MAX phase films was investigated by studying pulsed cathodic arc deposited samples grown on sapphire cut along the (0001), (1010), and (1102) crystallographic planes. Characterization of these samples was by x-ray diffraction, atomic force microscopy, and cross-sectional transmission electron microscopy. On the (1010) substrate, tilted (1018) growth of Ti{sub 2}AlC was found, such that the TiC octahedra of the MAX phase structure have the same orientation as a spontaneously formed epitaxial TiC sublayer, preserving the typical TiC-Ti{sub 2}AlC epitaxial relationship and confirming the importance of this relationship in determining MAX phase film orientation. An additional component of Ti{sub 2}AlC with tilted fiber texture was observed in this sample; tilted fiber texture, or axiotaxy, has not previously been seen in MAX phase films.

36 MATERIALS SCIENCE↗

Charge Transport Characteristics Of Cobalt Phthalocyanine Thin Films Grown By Molecular Beam Epitaxy

In the recent times organic semiconductors (OSC) have received attention because of their application in low-cost, flexible, and large area electronics devices. The application of OSC thin films has been limited due to their low charge carrier mobility ({approx}0.1 cm{sup 2}/V-s). We have investigated the effect of substrate on structure and charge transport characteristics of cobalt phthalocyanine (CoPc) films. Thin films have been grown on both single crystal (sapphire and LaAlO{sub 3}) and amorphous (quartz) substrates using molecular beam epitaxy system. The films grown on LaAlO{sub 3} substrates exhibited a higher value of mobility ({approx}4 cm{sup 2}/V-s) while those grown on Al{sub 2}O{sub 3} and quartz showed mobility value of {approx}1 cm{sup 2}/V-s. High mobility for LaAlO{sub 3} substrates has been attributed to the enhanced ordering of the molecules due to natural twin boundaries of substrates. In order to further confirm role of grain boundaries in aligning the CoPc molecules, we measured the charge transport on films deposited at bi-crystal SrTiO{sub 3} substrates. The results showed that current along bi-crystal grain boundary is three orders of magnitude higher than for films on SrTiO{sub 3} substrate without grain boundary, which confirms our hypothesis of ordering of molecules along grain boundaries.

36 MATERIALS SCIENCE↗

Correlation between structure and electrical transport in ion-irradiated graphene grown on Cu foils

Graphene grown by chemical vapor deposition and supported on SiO{sub 2} and sapphire substrates was studied following the controlled introduction of defects induced by 35 keV carbon ion irradiation. Changes in Raman spectra for fluences ranging from 10{sup 12} to 10{sup 15} cm{sup -2} indicate that the structure of graphene evolves from a highly ordered layer, to a patchwork of disordered domains, to an essentially amorphous film. These structural changes result in a dramatic decrease in the Hall mobility by orders of magnitude while, remarkably, the Hall concentration remains almost unchanged, suggesting that the Fermi level is pinned at a hole concentration near 1x10{sup 13} cm{sup -2}. A model for scattering by resonant scatterers is in good agreement with mobility measurements up to an ion fluence of 1x10{sup 14} cm{sup -2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Extreme low-temperature molecular beam epitaxy of ZnO-based quantum structures

We report on extreme low-temperature growth of ZnO by plasma-assisted molecular beam epitaxy. Epilayers and quantum well (QW) structures with very good structural and optical properties are prepared at substrate temperatures as low as 50 deg. C. The growth proceeds in a single crystalline layer-by-layer mode. ZnO QWs prepared on a-plane sapphire show bright excitonic luminescence with a very narrow linewidth of only 6 meV at 5 K. High-resolution transmission electron micrographs confirm that low-temperature single crystalline growth is not restricted to a particular surface termination of ZnO but works also for crystal growth along a nonpolar direction.

36 MATERIALS SCIENCE↗

Effect of window reflections on photonic Doppler velocimetry measurements

Photonic Doppler velocimetry (PDV) has rapidly become a standard diagnostic for measuring velocities in dynamic compression research. While free surface velocity measurements are fairly straightforward, complications occur when PDV is used to measure a dynamically loaded sample through a window. Fresnel reflections can severely affect the velocity and time resolution of PDV measurements, especially for low-velocity transients. Shock experiments of quartz compressed between two sapphire plates demonstrate how optical window reflections cause ringing in the extracted PDV velocity profile. Velocity ringing is significantly reduced by using either a wedge window or an antireflective coating.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Determination of the temperature of bremsstrahlung photon generated by ultraintense laser using various thickness attenuators

We evaluate the simplified method using the Lambert-Beer law to measure the temperature of bremsstrahlung photon generated by an ultraintense laser. Analytical values are compared to the results of the Monte Carlo calculation of GEANT4 and they agreed very well on the condition of the appropriate distance between the attenuator and the detector. We performed the experiment to measure the temperature of bremsstrahlung x-ray emitted from a metal target irradiated by a Ti:sapphire laser with 76 mJ, 72 fs, 2.2 x 10{sup 18} W/cm{sup 2}. For a Cu target of 30 {mu}m thick, the photon temperature was reasonably determined to be 0.18 MeV, which is in good agreement with previous studies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

X-ray enhancement in a nanohole target irradiated by intense ultrashort laser pulses

In this paper, we present a comparative study of the laser energy absorption, soft x-ray emission (in the water window region: 2.3-4.4 nm) and hard x-ray emission (in the 2-20 keV range) from planar aluminum and nanohole alumina of 40 nm average diameter, when irradiated by Ti:sapphire laser pulses. The laser pulse duration was varied from 45 to 500 fs, and the focused intensity on the target ranged from {approx}3 x 10{sup 16} W/cm{sup 2} to 3x10{sup 17} W/cm{sup 2}. The x-ray yield enhancement from the nanoholes shows an increased coupling of the laser energy to the target. The effect of laser pulse duration on the x-ray emission was also studied, where a resonance like phenomenon was observed. The laser energy absorption measurements in the nanoholes showed a marginal enhancement in absorption as compared to planar Al. The integrated keV x-ray yield, from nanohole alumina and planar Al, at an intensity of 3 x 10{sup 17} W/cm{sup 2}, was 25 and 3.5 {mu}J, respectively. The results can be explained by considering the hydrodynamic expansion of the laser irradiated structure and field enhancement in the nanoholes.

36 MATERIALS SCIENCE↗

Pencil lead plasma for generating multimicrojoule high-order harmonics with a broad spectrum

Using the plasma harmonic method, we show the generation of efficient and intense high-order harmonics from plasma of pencil lead. We demonstrate multimicrojoule energy in each harmonic order for the 11th to the 17th order of a Ti:sapphire laser. By analyzing the target morphology and the plasma composition, we conclude that these intense harmonics are generated from nanoparticles of graphitic carbon.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dependence of crystal orientation and bandgap on substrate temperature of molecular-beam epitaxy grown InN on bare Al{sub 2}O{sub 3} (0001)

The issue of variable bandgap values for InN films grown on c-sapphire has been addressed in this work. {alpha}-InN films have been deposited in nitrogen rich condition at different substrate temperatures on bare Al{sub 2}O{sub 3} (0001) by plasma assisted molecular beam epitaxy (PA-MBE). The results of several complementary characterization techniques show that single crystalline wurtzite InN is formed, but their orientation depends on the substrate temperature. The bandgap measured on these samples (1.78 eV) is explained by Moss-Burstein shift on these degenerately n-doped samples. Our results discount effects of crystal orientation, presence of oxygen at grain boundaries and In/N stoichiometry as factors that influence the measured band-gap values.

36 MATERIALS SCIENCE↗

Structural controlled magnetic anisotropy in Heusler L1{sub 0}-MnGa epitaxial thin films

Ferromagnetic L1{sub 0}-MnGa thin films have been epitaxially grown on GaN, sapphire, and MgO substrates using molecular beam epitaxy. Using diffraction techniques, the epitaxial relationships are determined. It is found that the crystalline orientation of the films differ due to the influence of the substrate. By comparing the magnetic anisotropy to the structural properties, a clear correlation could be established indicating that the in-plane and out-of-plane anisotropy is directly determined by the crystal orientation of the film and could be controlled via selection of the substrates. This result could be helpful in tailoring magnetic anisotropy in thin films for spintronic applications.

36 MATERIALS SCIENCE↗