Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Recrystallization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Formation mechanism and the role of nanoparticles in Fe-Cr ODS steels developed for radiation tolerance

Structures of nanoparticles in Fe-16Cr-4.5Al-0.3Ti-2W-0.37Y{sub 2}O{sub 3} (K3) and Fe-20Cr-4.5Al-0.34Ti-0.5Y{sub 2}O{sub 3} (MA956) oxide dispersion strengthened (ODS) ferritic steels produced by mechanical alloying (MA) and followed by hot extrusion have been studied using high-resolution transmission electron microscopy (HRTEM) techniques to understand the formation mechanism of nanoparticles in MA/ODS steels. The observations of Y-Al-O complex-oxide nanoparticles in both ODS steels imply that decomposition of Y{sub 2}O{sub 3} in association with internal oxidation of Al occurred during mechanical alloying. While the majority of oxide nanoparticles formed in both steels is Y{sub 4}Al{sub 2}O{sub 9}, a few oxide particles of YAlO{sub 3} are also observed occasionally. These results reveal that Ti (0.3 wt %) plays an insignificant role in forming oxide nanoparticles in the presence of Al (4.5 wt %). HRTEM observations of crystalline nanoparticles larger than {approx}2 nm and amorphous or disordered cluster domains smaller than {approx}2 nm provide an insight into the formation mechanism of oxide nanoparticle in MA/ODS steels, which we believe from our observations involves solid-state amorphization and recrystallization. The role of nanoparticles in suppressing radiation-induced swelling is revealed through TEM examinations of cavity distributions in ion-irradiated Fe-14Cr and K3-ODS ferritic steels. HRTEM observations of helium-filled cavities (helium bubbles) preferably trapped at nanoscale oxide particles and clusters in ion-irradiated K3-ODS are presented.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Flowing damage in ion-implanted amorphous silicon

Using molecular-dynamics simulations, we have studied the creation and evolution of damage in crystalline and amorphous silicon following the implantation of energetic keV ions. A method is proposed to identify anomalous atoms based on a weighted combination of local, atomic-scale properties, which applies to both Si phases. For crystalline Si, the passage of the ions causes compact amorphous regions to form, while no evidence for melting is observed. The relaxation of the amorphouslike regions proceeds initially by the rapid recrystallization of smaller clusters and isolated atoms, followed by a long period of steplike changes in the number of defects due to spontaneous annealing of damage pockets at the crystalline-amorphous interface. In amorphous Si, the initial stage of damage annealing (which lasts a few picoseconds) resembles closely that observed in crystalline Si; on larger time scales, however, the damage is found to ''percolate,'' or flow, through the system, inducing damage away from the collision cascade, thus causing an overall ''derelaxation'' of the material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced annealing of the dislocation network under irradiation

In crystalline metals, the dislocation network is the main source of internal strain, while irradiation steadily injects new sources of internal strain (point defects, defect clusters). As a consequence, the evolution of the dislocation network is driven by irradiation. While the atomistic mechanisms by which the forcing proceeds have long been suggested, namely the partitioning of defect elimination between dislocations and other defect sinks, both in stationary or transient regimes, some of the macroscopic consequences, such as irradiation enhanced dislocation annealing and irradiation driven recrystallization, are left unexplained. In this work we show that dislocation sink strengths for point defects are altered in the presence of neighboring dislocations and their climb motion is coordinated with the dislocation microstructure. A climb model, which takes into account the dislocation network, provides the mechanism for coordinated climb, which is shown to ease dislocation annealing. In particular, we demonstrate that coordinated dislocation climb accelerates the annihilation of dislocation pairs with the opposite sign and the repulsion of dislocations of the same sign, thereby, among other things, promoting the annealing of small-angle tilt boundaries by subgrain rotation.

36 MATERIALS SCIENCE↗

Ferromagnetism in Mn-Implanted Epitaxially Grown Ge on Si(100)

We have studied ferromagnetism of Mn-implanted epitaxial Ge films on silicon. The Ge films were grown by ultrahigh vacuum chemical vapor deposition using a mixture of germane (GeH{sub 4}) and methylgermane (CH{sub 3}GeH{sub 3}) gases with a carbon concentration of less than 1 at. %, and observed surface rms roughness of 0.5 nm, as measured by atomic force microscopy. Manganese ions were implanted in epitaxial Ge films grown on Si (100) wafers to an effective concentration of 16, 12, 6, and 2 at. %. Superconducting quantum interference device measurements showed that only the three highest Mn concentration samples are ferromagnetic, while the fourth sample, with [Mn] = 2 at. %, is paramagnetic. X-ray absorption spectroscopy and x-ray magnetic circular dichroism measurements indicate that localized Mn moments are ferromagnetically coupled below the Curie temperature. Isothermal annealing of Mn-implanted Ge films with [Mn] = 16 at. % at 300 C for up to 1200 s decreases the magnetization but does not change the Curie temperature, suggesting that the amount of the magnetic phase slowly decreases with time at this anneal temperature. Furthermore, transmission electron microscopy and synchrotron grazing incidence x-ray diffraction experiments show that the Mn-implanted region is amorphous, and we believe that it is this phase that is responsible for the ferromagnetism. This is supported by our observation that high-temperature annealing leads to recrystallization and transformation of the material into a paramagnetic phase.

36 MATERIALS SCIENCE↗

Radiation-induced damage and evolution of defects in Mo

The formation of defects in bcc Mo lattice as a result of 50-keV Xe bombardment is studied via atomistic simulation with an interatomic potential developed using the force-matching ab initio based approach. The defect evolution in the cascade is described. Diffusion and interaction of interstitials and vacancies are analyzed. Only small interstitial atom clusters form directly in the cascade. Larger clusters grow only via aggregation at temperatures up to 2000 K. Stable forms of clusters demonstrate one-dimensional diffusion with a very high diffusion coefficient and escape quickly to the open surface. Point vacancies have much lower diffusivity and do not aggregate. The possibility of a large prismatic vacancy loop formation near the impact surface as a result of fast recrystallization is revealed. The mobility of the vacancy dislocation loop segments is high, however, the motion of the entire loops is strongly hindered by neighbor point defects. This paper explains the existence of the large prismatic vacancy loops and the absence of the interstitial loops in the recent experiments with ion irradiation of Mo foils.

36 MATERIALS SCIENCE↗

Crystallization Dynamics of a Single Layer Complex Plasma

We report a series of complex (dusty) plasma experiments, aimed at the study of the detailed time evolution of the recrystallization process following a rapid quench of a two-dimensional dust liquid. The experiments were accompanied by large-scale (million-particle) molecular dynamics simulations, assuming Yukawa-type interparticle interaction. Both experiment and simulation show a {proportional_to}t{sup {alpha}} (power-law) dependence of the linear crystallite domain size as measured by the bond-order correlation length, translational correlation length, dislocation (defect) density, and a direct size measurement algorithm. The results show two stages of order formation. On short time scales, individual particle motion dominates; this is a fast process characterized by {alpha}=0.93{+-}0.1. At longer time scales, small crystallites undergo collective rearrangement, merging into bigger ones, resulting in a smaller exponent {alpha}=0.38{+-}0.06.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Grain Enhancement in Polycrystalline CuGaSe 2 by AgBr Vapor Treatment

Copper Gallium diselenide (CuGaSe 2 or CGS) thin film were deposited using a three-stage thermal co-evaporation process on molybdenum coated soda lime glass. Recrystallization was carried after the second stage by flashing AgBr for 2 mins. The change in morphology, structure and depth profile were studied after the treatment. SEM and XRD showed an increase in grain size and enhanced crystallinity. Here, a decrease in sodium profile after the treatment was observed through SIMS measurements. Overall, AgBr treatment of CGS seems to be promising for the improvement of film quality, which could help with enhanced device fabrication in the future.

14 SOLAR ENERGY↗

Impact of Indium Chloride Treatment on the Properties of CuInSe 2 Thin Films

Copper Indium diselenide (CIS) semiconductor thin films were deposited by single-stage process. Following the deposition, annealing and recrystallization of CIS was carried out in the presence of InCl 3 at different temperatures. Increase in grain size was observed by SEM in all cases. Increase in peak intensity was observed by XRD after treatment, correlating well with the SEM results. Measurements of the composition by both XRF and EDS indicate significant changes, notably a decrease in copper content. Here, this will likely be an issue for device performance and will need to be addressed.

14 SOLAR ENERGY↗

Effect of Metal Halides Treatment on High Throughput Low Temperature CIGS Solar Cells

Copper indium gallium diselenide (CIGS) semiconductor thin films were deposited at high rate and low temperature using single-stage thermal co-evaporation process on molybdenum back contact. A post deposition treatment was done by flashing AgBr at 350 ºC to induce recrystallization. Changes in morphology were confirmed by SEM, with an observed increase in grain size, as well as by XRD measurements, with a decrease in FWHM. Device results show an improvement of the performance after the AgBr vapor treatment, as all the photovoltaic parameters enhanced. Altogether, AgBr seems to be a suitable transport agent and beneficial for device fabrication.

14 SOLAR ENERGY↗

Post-deposition Metal Halide Treatment of CuGaSe 2 for Photovoltaic Application

Copper gallium diselenide (CGS) semiconductor thin films were deposited by three-stage thermal co-evaporation process. Post-deposition treatments and recrystallization were performed at various AgBr doses of 40 mg, 60 mg, and 80 mg after the 2 nd stage. The changes in surface morphology were confirmed by SEM. The electrical properties were also modified, as the resistivity of the film decreases with increasing doses. Here, the device performance after the treatment did not change as expected, as the overall device performance only slightly increases in the case of 60 mg of AgBr. Substantial changes in the fabrication process will therefore be required for better device results.

14 SOLAR ENERGY↗

Shear-based deformation processing of age-hardened aluminum alloy for single-step sheet production

Shear-based deformation processing by hybrid cutting-extrusion and free machining are used to make continuous strip, of thickness up to one millimeter, from low-workability AA6013-T6 in a single deformation step. The intense shear can impose effective strains as large as 2 in the strip without pre-heating of the workpiece. The creation of strip in a single step is facilitated by three factors inherent to the cutting deformation zone: highly confined shear deformation, in situ plastic deformation-induced heating and high hydrostatic pressure. The hybrid cutting-extrusion, which employs a second die located across from the primary cutting tool to constrain the chip geometry, is found to produce strip with smooth surfaces (S a < 0.4 μm) that is similar to cold-rolled strip. The strips show an elongated grain microstructure that is inclined to the strip surfaces – a shear texture – that is quite different from rolled sheet. Furthermore, this shear texture (inclination) angle is determined by the deformation path. Through control of the deformation parameters such as strain and temperature, a range of microstructures and strengths could be achieved in the strip. When the cutting-based deformation was done at room temperature, without workpiece pre-heating, the starting T6 material was further strengthened by as much as 30% in a single step. In elevated-temperature cutting-extrusion, dynamic recrystallization was observed, resulting in a refined grain size in the strip. Implications for deformation processing of age-hardenable Al alloys into sheet form, and microstructure control therein, are discussed.

36 MATERIALS SCIENCE↗

Control over the Size Effect in the Spectroscopic Properties of Zn{sub x}Cd{sub 1–} {sub x}S Colloidal Quantum Dots

Approaches are developed for controlling the size effect in the absorption and photoluminescence properties of colloidal CdS and Zn{sub 0.5}Cd{sub 0.5}S quantum dots (QDs) in a gelatin matrix and thioglycolic acid. We analyze spectroscopic manifestations of dark Ostwald ripening and size-selective photoetching and demonstrate that the illumination of molten colloidal CdS and Zn{sub 0.5}Cd{sub 0.5}S QD solutions at a wavelength lying at the optical absorption edge in the presence of hydrogen peroxide as a catalyst for photoetching leads to a blue shift of the optical absorption and photoluminescence spectra of the QDs. Analysis of TEM images of QD samples leads us to conclude that photoetching reduces the average QD size as a consequence of the photodissolution of the CdS and Zn{sub 0.5}Cd{sub 0.5}S compounds. We demonstrate that, by contrast, heat treatment of the synthesized CdS and Zn{sub 0.5}Cd{sub 0.5}S QD sols at a temperature between 75 and 90°C leads to an increase in nanocrystal size through recrystallization, which shows up as a redshift of the optical absorption and photoluminescence spectra of the corresponding samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystallization, crystal-structure refinement, and IR spectroscopy of a synthetic hexahydroborite analog

The crystal structure of the hexahydroborite analog Ca[B(OH){sub 4}]{sub 2} {center_dot} 2H{sub 2}O (a = 7.9941(3) Angstrom-Sign , b = 6.6321(2) Angstrom-Sign , c = 7.9871(3) Angstrom-Sign , {beta} = 104.166(4) Degree-Sign , V = 410.58(3) Angstrom-Sign {sup 3}, sp. gr. P2/c, Z = 2, {rho}{sub calc} = 1.891 g/cm{sup 3}; Xcalibur S CCD automated diffractometer, 1196 reflections with I > 2{sigma}(I), {lambda}MoK{sub {alpha}}), which was synthesized by the hydrothermal method via the recrystallization of calciborite CaB{sub 2}O{sub 4} (M) in the M - B{sub 2}O{sub 3} - H{sub 2}O system (t = 250 Degree-Sign C and P = 70-80 atm), was refined by the least-squares method with anisotropic displacement parameters (H atoms were located; R{sub 1} = 0.0260). The structure of synthetic hexahydroborite consists of infinite columns running along the c axis. The columns are formed by Ca polyhedra linked together and to [B(OH){sub 4}] orthotetrahedra by sharing edges. Along the two other axes, the translationally equivalent columns are linked only by hydrogen bonds. The presence of a stronger bond between the discrete (Ca-B-O) columns along the shortest (b = 6.6 Angstrom-Sign ) axis accounts for the possibility of the shift of the columns by 1/2T{sub b} and the formation of the second modification of Ca[B(OH){sub 4}]{sub 2} {center_dot} 2H{sub 2}O. The crystals of synthetic hexahydroborite were studied by IR spectroscopy. A crystal-chemical analysis was performed for a series of natural metaborates with the general formula CaB{sub 2}O{sub 4} {center_dot} nH{sub 2}O (CaO: B{sub 2}O{sub 3} = 1: 1, n = 0-6), including calciborite CaB{sub 2}O{sub 4} and hexahydroborite CaB{sub 2}O{sub 4} {center_dot} 6H{sub 2}O as the end members.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of double annealing on the critical parameters of highly textured YBa{sub 2}Cu{sub 3}O{sub 6.9}

The effect of low-temperature treatment (200 Degree-Sign C) and subsequent annealing at 930 Degree-Sign C on the critical parameters of highly textured YBa{sub 2}Cu{sub 3}O{sub 6.9} is studied. The structural defects that are formed during the low-temperature decomposition of this compound into phases with different oxygen contents and during interaction with atmospheric moisture are shown to deteriorate the superconducting properties. After annealing at T = 930 Degree-Sign C and subsequent oxidation, superconductivity is restored and the formed defects are partly retained and serve as effective pinning centers, including the case of high magnetic fields. The stresses induced by the low-temperature treatment lead to primary recrystallization at T = 930 Degree-Sign C, which results in the disappearance of texture and an isotropic state of the material in high fields.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructure and mechanical properties of V–4Ti–4Cr alloy as a function of the chemical heat treatment regimes

The regularities of the formation of a heterophase structure and mechanical properties of V–4Ti–4Cr alloy as a function of thermomechanical and chemical heat treatments are studied. The regimes of thermomechanical treatment which provide the formation of a heterophase structure with a homogeneous volume distribution of oxycarbonitride nanoparticles with a size of about 10 nm and an increase in the volume content and thermal stability of this phase and which provide an increase in the temperature of alloy recrystallization are developed. The formation of the heterophase structure results in a substantial (up to 70%) increase in the short-term high-temperature strength of the alloy at T = 800°C. The increase in the strength is achieved while keeping a rather high level of plasticity.

36 MATERIALS SCIENCE↗

The effect of thermomechanical treatment regimes on microstructure and mechanical properties of V–Me(Cr, W)–Zr–C alloys

The regularities of the formation of a heterophase structure in dispersion-strengthened vanadium V–Me(Cr, W)–Zr–C alloys are studied as a function of the regimes of their thermomechanical treatment. The regimes of treatment providing a substantial increase in the dispersity and homogeneity of spatial distribution of ZrC particles, temperature of recrystallization, and high-temperature (at T = 800°C) short-time strength are found in comparison to conventional treatment regimes.

36 MATERIALS SCIENCE↗

Results of high heat flux tests of tungsten divertor targets under plasma heat loads expected in ITER and tokamaks (review)

Heat loads on the tungsten divertor targets in the ITER and the tokamak power reactors reach ~10MW m{sup −2} in the steady state of DT discharges, increasing to ~0.6–3.5 GW m{sup −2} under disruptions and ELMs. The results of high heat flux tests (HHFTs) of tungsten under such transient plasma heat loads are reviewed in the paper. The main attention is paid to description of the surface microstructure, recrystallization, and the morphology of the cracks on the target. Effects of melting, cracking of tungsten, drop erosion of the surface, and formation of corrugated and porous layers are observed. Production of submicron-sized tungsten dust and the effects of the inhomogeneous surface of tungsten on the plasma–wall interaction are discussed. In conclusion, the necessity of further HHFTs and investigations of the durability of tungsten under high pulsed plasma loads on the ITER divertor plates, including disruptions and ELMs, is stressed.

36 MATERIALS SCIENCE↗