Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REDOX REACTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Solar Thermochemical Carbon Dioxide Splitting Using Ceria and Iron Aluminate Foam Devices and Simulation of a Plant System for Demonstration

An international research project has been undertaken to integrate a unique solar thermal processing reactor system with ceria and iron aluminate as active redox materials for CO2 splitting. Experimental investigations for CO2 splitting were conducted using a solar simulator and tube furnace at Niigata University, followed by demonstrations using a high-flux solar furnace (HFSF) at the National Renewable Energy Laboratory (NREL) in Golden, CO. Each experimental setup consisted of foam devices composed of reticulated porous ceramic (RPC). The RPC has a full ceria or iron aluminate body. It fabricated using the replica method and subjected to a two-step redox reaction, which iteratively separated a stream of CO2 into O2 and CO. Reactivity was evaluated using CO production per mass of the reactive material. The tubular furnace yielded a CO production of 6.41 mL/g at a reduction temperature of 1600degrees C, showcasing a higher CO production rate and total amount than those obtained from experiments conducted with solar simulators and solar furnace setups. For iron aluminate RPC, the productivity was measured as 3.57 mL/g using HFSF at a reduction temperature of 1450degrees C. These results are somewhat higher than those of the previous experiment at lower reduction temperatures of 1400degrees C-1500degrees C. Additionally, the production of CO in the case of ceria RPC was compared with the steady flow model simulation, which assumed chemical equilibrium at various levels of oxygen partial pressure during the reduction process. On the basis of these results, this study proposes a solar fuel system with an open receiver that uses a high-temperature heat transfer fluid.

carbon dioxide thermochemical splitting↗

Spectroelectrochemistry as a Strategy for Improving Selectivity of Sensors for Security and Defense Applications

Spectroelectrochemistry provides improved selectivity for sensors by electrochemically modulating the optical signal associated with the analyte. The sensor consists of an optically transparent electrode (OTE) coated with a film that preconcentrates the target analyte. The OTE functions as an optical waveguide for attenuated total reflectance (ATR) spectroscopy, which detects the analyte by absorption. Alternatively, the OTE can serve as the excitation light for fluorescence detection, which is generally more sensitive than absorption. The analyte partitions into the film, undergoes an electrochemical redox reaction at the OTE surface, and absorbs or emits light in its oxidized or reduced state. The change in the optical response associated with electrochemical oxidation or reduction at the OTE is used to quantify the analyte. Absorption sensors for metal ion complexes such as [Fe(CN)6]4- and [Ru(bpy)3]2+ and fluorescence sensors for [Ru(bpy)3]2+ and the polycyclic aromatic hydrocarbon 1-hydroxypyrene have been developed. The sensor concept has been extended to binding assays for a protein using avidin–biotin and 17β-estradiol–anti-estradiol antibodies. The sensor has been demonstrated to measure metal complexes in complex samples such as nuclear waste and natural water. This sensor has qualities needed for security and defense applications that require a high level of selectivity and good detection limits for target analytes in complex samples. Quickly monitoring and designating intent of a nuclear program by measuring the Ru/Tc fission product ratio is such an application.

Environmental Molecular Sciences Laboratory↗

Photoactivation of Drosophila melanogaster cryptochrome through sequential conformational transitions

Cryptochromes are blue-light photoreceptor proteins, which provide input to circadian clocks. The cryptochrome from Drosophila melanogaster ( Dm Cry) modulates the degradation of Timeless and itself. It is unclear how light absorption by the chromophore and the subsequent redox reactions trigger these events. Here, we use nano- to millisecond time-resolved x-ray solution scattering to reveal the light-activated conformational changes in Dm Cry and the related (6-4) photolyase. Dm Cry undergoes a series of structural changes, culminating in the release of the carboxyl-terminal tail (CTT). The photolyase has a simpler structural response. We find that the CTT release in Dm Cry depends on pH. Mutation of a conserved histidine, important for the biochemical activity of Dm Cry, does not affect transduction of the structural signal to the CTT. Instead, molecular dynamics simulations suggest that it stabilizes the CTT in the resting-state conformation. Our structural photocycle unravels the first molecular events of signal transduction in an animal cryptochrome.

59 BASIC BIOLOGICAL SCIENCES↗

Solid-state polymer-particle hybrid electrolytes: Structure and electrochemical properties

Solid-state electrolytes (SSEs) are challenged by complex interfacial chemistry and poor ion transport through the interfaces they form with battery electrodes. Here, we investigate a class of SSE composed of micrometer-sized lithium oxide (Li 2 O) particles dispersed in a polymerizable 1,3-dioxolane (DOL) liquid. Ring-opening polymerization (ROP) of the DOL by Lewis acid salts inside a battery cell produces polymer-inorganic hybrid electrolytes with gradient properties on both the particle and battery cell length scales. These electrolytes sustain stable charge-discharge behavior in Li||NCM811 and anode-free Cu||NCM811 electrochemical cells. On the particle length scale, Li 2 O retards ROP, facilitating efficient ion transport in a fluid-like region near the particle surface. On battery cell length scales, gravity-assisted settling creates physical and electrochemical gradients in the hybrid electrolytes. By means of electrochemical and spectroscopic analyses, we find that Li 2 O particles participate in a reversible redox reaction that increases the effective CE in anode-free cells to values approaching 100%, enhancing battery cycle life.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lactiplantibacillus plantarum uses ecologically relevant, exogenous quinones for extracellular electron transfer

Extracellular electron transfer (EET) is a metabolic process that frequently uses quinones to couple intracellular redox reactions with extracellular electron acceptors. The physiological relevance of this metabolism for microorganisms capable of EET but unable to synthesize their own quinones remains to be determined. To address this question, we investigated quinone utilization by Lactiplantibacillus plantarum, a microorganism required for food fermentations, that performs EET and is also a quinone auxotroph. L. plantarum selectively used 1,4-dihydroxy-2-naphthoic acid (DHNA) and more hydrophilic naphthoquinones for EET reduction of insoluble iron (ferrihydrite). However, quinones used for EET also inhibited L. plantarum growth in non-aerated conditions. Transcriptomic analysis showed that DHNA-induced oxidative stress in L. plantarum, but this was alleviated when the electron acceptor, ferric ammonium citrate (FeAC), was included in the growth medium. Although DHNA and FeAC induced L. plantarum EET, this metabolism was still dependent on direct access to environmental electron shuttles. To determine whether quinone-producing food fermentation bacteria could be sources of those electron shuttles, L. plantarum EET was measured after incubation with Lactococcus lactis and Leuconostoc mesenteroides. Quinone-producing L. lactis, but not a quinone-deficient L. lactis ΔmenC mutant, increased L. plantarum ferrihydrite reduction and medium acidification through an EET-dependent mechanism. L. plantarum EET was also stimulated by L. mesenteroides, resulting in greater environmental acidification and transient increases in L. plantarum cell numbers. Our findings show that L. plantarum overcomes the toxic effects of exogenous quinones to use those compounds for EET-conferred, ecological advantages during the early stages of food fermentations.

59 BASIC BIOLOGICAL SCIENCES↗

New Materials for Photoelectrochemical Energy Conversion

This review concerns light-to-chemical energy conversion, focusing on approaches that could be driven by terrestrial sunlight to produce hydrogen and/or reduce carbon dioxide. Recent advances in photocatalytic (PC) and photoelectrocatalytic (PEC) materials are covered. In both approaches, the electron-hole pairs that are created by photon absorption must travel in specific directions to the sites that mediate multielectron bond making/breaking redox reactions. Thermodynamic requirements for materials stability are described, although some recently discovered materials appear to be exceptions. For PC materials, the importance of rate matching between reduction and oxidation processes and the mass transfer of intermediates and products is emphasized. Surprisingly, metal sulfides appear to be promising for PC carbon dioxide reduction. For PEC materials, recent work elucidating the elementary step mechanism for oxygen evolution on metal oxides and the discovery of chalcogen-based photocathode materials capable of sustained light-driven CO 2 reduction are discussed.

energy conversion↗

Redox transistors for neuromorphic computing

Efficiency bottlenecks inherent to conventional computing in executing neural algorithms have spurred the development of novel devices capable of “in-memory” computing. Commonly known as “memristors,” a variety of device concepts including conducting bridge, vacancy filament, phase change, and other types have been proposed as promising elements in artificial neural networks for executing inference and learning algorithms. In this article, we review the recent advances in memristor technology for neuromorphic computing and discuss strategies for addressing the most significant performance challenges, including nonlinearity, high read/write currents, and endurance. As an alternative to two-terminal memristors, we introduce the three-terminal electrochemical memory based on the redox transistor (RT), which uses a gate to tune the redox state of the channel. Decoupling the “read” and “write” operations using a third terminal and storage of information as a charge-compensated redox reaction in the bulk of the transistor enables high-density information storage. These properties enable low-energy operation without compromising analog performance and nonvolatility. Finally, we discuss the RT operating mechanisms using organic and inorganic materials, approaches for array integration, and prospects for achieving the device density and switching speeds necessary to make electrochemical memory competitive with established digital technology.

97 MATHEMATICS AND COMPUTING↗

Research Strategies for Development of an Efficient and Effective Electrocatalyst for Polymer Electrolyte Membrane Fuel Cells and Progress Summary

The current electrocatalyst formulation for the polymer electrolyte membrane fuel cell (PEMFC), platinum supported on carbon (Pt/C), is known to be an effective promoter of redox reactions in fuel cells. However, the cost of Pt (currently ~$2,000/troy ounce) hinders its use as a practical catalyst in commercial fuel cell-powered vehicles at current platinum loading. Another issue with respect to adoption of any electrocatalyst for vehicle applications is durability, especially in light of transportation drive cycle operation with start/stop, start-up/shut-down, and transient requirements. Thus, a robust alternative to current Pt/C technology is needed as the PEMFC electrocatalyst for the oxygen reduction reaction (ORR) on the cathode. The U.S. Department of Energy is funding cathode catalyst research on low-platinum group metal (PGM) catalysts, including alloys and core-shell systems, and on non-PGM catalysts. This paper provides an overview of the issues, approaches, and status of the research.

electrocatalyst↗

Ab Initio Studies of Discharge Mechanism of MnO 2 in Deep-Cycled Rechargeable Zn/MnO 2 Batteries

Rechargeable alkaline Zn/MnO 2 batteries are an attractive solution for large-scale energy storage applications. Recently, Bi and Cu additives have been used to increase the cycle life and capacity of rechargeable Zn/MnO 2 batteries, with an equivalent of the full two-electron capacity realized for many cycles, in the absence of zinc. However, the mechanism of the effect of Bi and Cu on the performance of rechargeable Zn/MnO 2 batteries has not been investigated in detail. We apply first-principles density functional computational methods to study the discharge mechanisms of the unmodified and Bi/Cu-modified γ -MnO 2 electrodes in rechargeable alkaline Zn/MnO 2 batteries. Using the results of our calculations, we analyze the possible redox reaction pathways in the γ -MnO 2 electrode and identify the electrochemical processes leading to the formation of irreversible discharge reaction products, such as hausmannite and hetaerolite. Our study demonstrates the possibility of formation of intermediate Bi-Mn and Cu-Mn oxides in deep-cycled Bi/Cu-modified MnO 2 electrodes. The formation of intermediate Bi-Mn and Cu-Mn oxides could reduce the rate of accumulation of irreversible reaction products in the MnO 2 electrode and improve the rechargeability and cyclability of Zn/MnO 2 batteries.

25 ENERGY STORAGE↗

Layer-by-Layer Nanoarchitectonics of Electrochemically Active Thin Films Comprised of Radical-Containing Polymers

Electroactive coatings based on non-conjugated redox-active polymers have increased in popularity with the development of thin film organic batteries. Here, control over coating deposition, redox-activity, and ion transport are key to improving their energy storage performance. In this work, the synthesis, solution state electrochemical characterization, and layer-by-layer (LbL) assembly of a nitroxide-based polycation and polyanion are presented. Solution state electrochemical characterization indicates that the rate of electron transfer for the nitroxide polyanion is much higher as compared to the nitroxide polycation. LbL thin films of the nitroxide polyanion and nitroxide polycation are assembled, demonstrating linear growth and tunable thickness (28 nm/layer pair). This work confirms that the ion transport mechanism of the LbL films during the redox reaction is influenced depending on the charge of the terminating layer, where the nitroxide polyanion can participate in self-doping, which leads to a contribution from cation transport. The nitroxide polyanion-terminated film also exhibits a higher capacity and a slightly reduced charge transfer resistance. However, it was also observed that a more pronounced capacity fade occurred for the polyanion-terminated film than the polycation-terminated film. Taken together, this highlights how oppositely charged radical-containing polyelectrolytes can form electroactive coatings for possible applications in energy storage or sensing.

25 ENERGY STORAGE↗

Effect of Electrolytes on the Cathode-Electrolyte Interfacial Stability of Fe-Based Layered Cathodes for Sodium-Ion Batteries

Iron (Fe)-based layered oxide cathodes that employ Fe 3+ /Fe 4+ redox reaction present a family of attractive cathode materials for sodium-ion batteries as iron is abundant, low-cost, and environmentally benign. However, their electrochemical performance is not yet satisfactory and requires further improvement. In this study, we investigate the effect of electrolytes on the electrochemical performance of α -NaFeO 2 , a prototypical model of Fe-based layered cathodes. First, we established the critical impact of the poor cathode-electrolyte interfacial stability on cell performances. Systematic electrochemical tests and material characterizations further revealed the degradation mechanism in which the highly reactive Fe 4+ state in the charged Na 1−x FeO 2 electrodes promotes severe electrolyte decomposition and subsequent growth of a thick interface layer that leads to impedance rise and performance degradation. In addition, the superior performance of NaPF 6 over NaClO 4 and the beneficial effect of the FEC additive are reported.

25 ENERGY STORAGE↗

Review—Fundamental Uranium Electrochemistry and Spectroscopy in Molten Salt Systems

Uranium is a key element used for nuclear energy production. Some advanced reactor designs, specifically molten salt reactors, will continue to use uranium as the fissile material for energy production. These new technologies require an intimate understanding of uranium chemistry during and after energy production. This review covers contemporary research on the coordination chemistry and behavior of uranium with the coolant and pyroprocessing salts as proposed for use in future reactor designs. Discussed topics include the nature of U redox reactions involving the reduction of U(III) to U metal and oxidation of U(III) to U(IV). These systems have been interrogated using cyclic voltammetry, chronopotentiometry, and optical and X-ray absorption spectroscopies. Insights obtained into the electrode potentials, the uranium species, and their diffusion coefficients in alkali halide melts from decades of research are summarized selectively. Further, perspectives are provided on the importance of unifying studies for comparison across multiple institutions. The application of synchrotron radiation research and multimodal approaches involving two (or more) probes, such as the widespread combination of UV–visible spectroscopy and electroanalysis known as spectroelectrochemistry, can provide new knowledge about the main process of uranium electrorefining—diffusion, as will be demonstrated in this review through the lack of comparable results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrochemical Residence Time Distribution as a Diagnostic Tool for Redox Flow Batteries

The fluid dynamic and electrochemical performance of redox flow batteries (RFBs) stems from the relationship between the flow field and the porous electrode, whose interplay determines how active species move and react during device operation. While characterization techniques, such as residence time distribution, offer insights into species mobility within a reactive volume for a traditional chemical reactor, electrochemical reactors also enable simultaneous measurement of the redox reactions, unlocking another dimension of analysis. Herein, we demonstrate how potentiodynamic measurements, using injections of electrolyte examined through moment analysis, can provide electrode-specific performance scaling relationships across a matrix of carbon paper and cloth electrodes with flow through and interdigitated flow fields. We further combine experimental campaigns with multiphysics simulations to demonstrate how electrode surface area can be estimated with this technique, which we then validate with activated and unactivated commercial carbon cloth electrodes. These studies reveal the multiscale observations that potentiodynamic measurements afford, augmenting existing electrochemical techniques for holistic electrochemical reactor diagnostics.

Electrochemistry↗

High-Resolution Nanoprinting Approach through Self-Driven Electrodeposition

A novel high-resolution nanoprinting method through self-driven electrodeposition is proposed and certain aspects are confirmed with known copper electrochemistry through multiphysics modeling. A series of simulations are conducted involving a nanopipette filled with concentrated CuSO 4 solution introduced close to the working electrode (WE) in the cell of diluted CuSO 4 electrolyte, where Cu 2+ ions diffuse from nanopipette to the electrode and form a limited region with more concentrated cations compared to the rest of the cell. Meanwhile, this process leads to a more positive equilibrium potential of copper redox reaction and thereby local negative surface overpotential on WE. The negative surface overpotential drives the Cu 2+ electrodeposition in the form of a nano-protrusion on the target location.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chemical weathering of layered Ni-rich oxide electrode materials: Evidence for cation exchange

Lithiated ternary oxides containing nickel, cobalt, and manganese are intercalation compounds that are used as positive electrodes in high-energy lithium-ion batteries. These materials undergo compositional changes that adversely affect their cycling performance when they are stored in humid air or exposed to moisture. There is a new urgency to better understanding of these “weathering” processes as manufacturing moves towards a more environmentally benign aqueous processing of the positive electrode. Delithiation in the oxide subsurface regions and the formation of lithium salts (such as hydroxides and carbonates) coating the surface, have been suggested as chemical drivers for these processes, but the mechanistic details remain poorly known. The redox reactions which follow oxide delithiation are believed to cause all of the observed transformations. In this article we suggest another possibility: namely, the proton – lithium exchange. We argue that this hypothesis provides a simple, comprehensive rationale for our observations from X-ray diffraction, X-ray photoelectron spectroscopy, scanning transmission electron microscopy, and electrochemical measurements. These observations include contraction of the c-axis (unit cell) lattice parameter, strain in the crystalline oxide bulk, directionality of the chemical damage, formation of amorphous surface films, and the partial recovery of capacity loss by electrochemical relithiation of the material. Lastly, these effects need to be mitigated before aqueous processing of the positive electrode can find widespread adoption during cell manufacturing.

25 ENERGY STORAGE↗

Topology Optimization for Full-Cell Electrochemical Energy Storage Device

This code is used to conduct topology optimization of a general full cell energy storage device. The anode and cathode designs are optimized simultaneously, allowing possibility for interdigitation. The charging mechanism can consist of both electric double layer charging (EDLC) typically observed in capacitors and redox reaction typically observed in batteries.

Roy, Thomas↗

Genome-wide association study of Gossypium arboreum resistance to reniform nematode

Background: Reniform nematode ( Rotylenchulus reniformis ) has emerged as one of the most destructive root pathogens of upland cotton ( Gossypium hirsutum ) in the United States. Management of R. reniformis has been hindered by the lack of resistant G. hirsutum cultivars; however, resistance has been frequently identified in germplasm accessions from the G. arboreum collection. To determine the genetic basis of reniform nematode resistance, a genome-wide association study (GWAS) was performed using 246 G. arboreum germplasm accessions that were genotyped with 7220 single nucleotide polymorphic (SNP) sequence markers generated from genotyping-by-sequencing. Results: Fifteen SNPs representing 12 genomic loci distributed over eight chromosomes showed association with reniform nematode resistance. For 14 SNPs, major alleles were shown to be associated with resistance. From the 15 significantly associated SNPs, 146 genes containing or physically close to these loci were identified as putative reniform nematode resistance candidate genes. These genes are involved in a broad range of biological pathways, including plant innate immunity, transcriptional regulation, and redox reaction that may have a role in the expression of resistance. Eighteen of these genes corresponded to differentially expressed genes identified from G. hirsutum in response to reniform nematode infection. Conclusions: The identification of multiple genomic loci associated with reniform nematode resistance would indicate that the G. arboreum collection is a significant resource of novel resistance genes. The significantly associated markers identified from this GWAS can be used for the development of molecular tools for breeding improved reniform nematode resistant upland cotton with resistance introgressed from G. arboreum . Additionally, a greater understanding of the molecular mechanisms of reniform nematode resistance can be determined through genetic structure and functional analyses of candidate genes, which will aid in the pyramiding of multiple resistance genes.

Cotton↗

Electrochemical behavior of uranyl in anhydrous polar organic media

Abstract Weak complexes between pentavalent and hexavalent actinyl cations have been reported to exist in acidic, non-complexing high ionic strength aqueous media. Such “cation-cation complexes” were first identified in the context of actinide-actinide redox reactions in acidic aqueous media relevant to solvent extraction-based separation systems, hence their characterization is of potential interest for advanced nuclear fuel reprocessing. This chemistry could be relevant to efforts to develop advanced actinide separations based on the upper oxidation states of americium, which are of current interest. In the present study, the chemical behavior of pentavalent uranyl was examined in non-aqueous, aprotic polar organic solvents (propylene carbonate and acetonitrile) to determine whether UO

Chemistry↗