Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REACTOR FUEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Postirradiation Examination of FUTURIX-FTA metallic alloy experiments

Two different metallic nuclear fuel alloys intended for transmutation applications in fast neutron spectrum nuclear reactors have been irradiated, and their performance has been evaluated after irradiation. These alloys contained elevated levels of plutonium and other minor actinides (Am, Np) compared to historically irradiated fast reactor fuel to ascertain the impact of these isotopes on fuel performance. The irradiation of these alloys was performed at the Phénix fast reactor in France to facilitate comparisons between true fast spectrum irradiations and pseudo-fast spectrum irradiations performed at the thermal neutron spectrum Idaho National Laboratory Advanced Test Reactor. The irradiation tests were designated FUTURIX-FTA DOE1 which contained a low-fertile alloy and FUTURIX-FTA DOE2 which contained a non-fertile alloy. The DOE1 fuel was irradiated to a measured burnup of 9.5 % fissions per initial heavy metal atom (FIMA), and the DOE2 fuel was irradiated to a measured burnup of 12.7 % fissions per initial heavy metal atom. This work reports baseline Postirradiation Examination (PIE) results for DOE1 and DOE2. Fuel swelling, fission product distribution, cladding strain, fission gas release, fuel microstructure, fuel cladding chemical interaction and minor actinide transmutation were all evaluated. Cladding strain was negligible and fission gas release was 52% for DOE1 and 69% for DOE2. The exams show the 2 pins behaved very similar to EBR-II metallic fuel experience. Minor actinides seem to not affect the performance of this candidate transmutation fuel. As a result, performance data from these irradiations can be used to inform the feasibility of minor actinide transmutation in future reactor systems.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Characterization of ceramic fuel powder packing fractions to support INFLUX

Triply periodic minimal surface (TPMS)-based structures show marked potential in novel nuclear reactor fuel designs, as their high surface area-to-volume ratio increases the efficiency of heat transfer out of the fuel, enabling safer, more innovative reactor designs. This milestone report addresses the role of dUO 2 powder processing route on the fill behavior of TPMS-based cladding shells to understand and advance the feasibility of manufacturing TPMS-based nuclear fuel forms. dUO 2 powder was processed through either a dry granulation route, varying consolidation pressure, or through milling, varying milling time, milling method and milled size distribution. The lowest tapped bulk densities (TBD), but best powder flowabilities, were obtained when testing unprocessed dUO 2 powder which was prone to self-agglomeration and formed low-density spheroids. The highest TBD and lowest flowabilities were obtained when using powder produced by hammer-milling dUO 2 powder to pass through a 200-mesh sieve, which led to particles with angular morphologies. Powder produced by dry granulation exhibited TBD that varied according to the consolidation pressure used to form the initial pellets and exhibited improved flowabilities when compared to hammer-milled material. Because of the large span of granule sizes formed as well as the irregular shape associated with the granules, a packing fraction of 0.69 was achieved, exceeding the analytical solution for random close packing of mono-sized spheres. TPMS polymer shells were loaded with unprocessed, granulated, and hammer-milled dUO 2 powders, and their qualitative packing behaviors were analyzed using x-ray computed tomography (xCT). TBDs calculated after loading TPMS polymer shells were 10-20% lower when compared to tapped bulk density measurements taken in a glass graduated cylinder, indicating a non-trivial impact on the tapped bulk density of either the TPMS channel size, TPMS channel surface material, powder cohesiveness, or a combination of the two parameters. A metallic zircaloy-4 TPMS shell will be loaded with hammer-milled dUO 2 powder upon receipt of the shell from Oak Ridge National Laboratory (ORNL) and shipped to Idaho National Labs (INL) for subsequent hot isostatic pressing (HIP) densification experiments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

SHARP Assembly-Scale Multiphysics Demonstration Simulations

The NEAMS Reactor Product Line effort aims to develop an integrated multiphysics simulation capability for the design and analysis of future generations of nuclear power plants. The Reactor Product Line code suite’s multi-resolution hierarchy is being designed to ultimately span the full range of length and time scales present in relevant reactor design and safety analyses, as well as scale from desktop to petaflop computing platforms. In this report, we describe our efforts to integrate thermal/hydraulics, neutronics, and structural mechanics modeling codes to perform coupled analysis of a representative fast sodium-cooled reactor fuel assembly. Over the past five years, the Reactor Product Line effort has developed high-fidelity single-physics codes for neutron transport modeling, in the PROTEUS code, and Large Eddy Simulation-based thermal/fluid modeling in the Nek5000 code. Both these codes have been exercised on over 100,000 processors of the IBM Blue Gene/P. The Diablo code has been used to perform structural mechanics and thermo-mechanical modeling. MOAB, the Reactor Geometry Generator (RGG), and MeshKit have been developed to generate and manipulate mesh and mesh-based data, in both serial and parallel environments. These tools together form a strong basis on which to build a multi-physics modeling capability. The goal of developing such a tool is to perform multi-physics neutronics, thermal/fluid, and structural mechanics modeling of the components inside a reactor core. While the focus of this report is on modeling a fast sodium-cooled reactor, it is also the goal that this simulation tool be useful for most reactor types. Here we report on the integration of PROTEUS and Nek5000 into the NEAMS framework. Both codes have been modified to read and write data from and to the MOAB library, in both serial and parallel environments. We focused on broad support for as many original physics code options as possible, rather than focusing only on near-term needs. Both codes were demonstrated through this interface on a relatively simple, seven-pin hexagonal fuel assembly. To support coupled analysis, the new multi-physics driver library COUPE was developed; this library provides flexible support for both loose and tight coupling, and can interface flexibly with codes in multiple programming languages. To couple results between the separate meshes used in each physics, the driver, PROTEUS, and Nek5000 all interface with the MBCoupler solution transfer tool provided with MOAB. Together, these tools form the basis of a new, coupled neutronics and thermal/fluid modeling code, that works in both serial and parallel. In a related effort, a driver in the Diablo code was used to access Nek5000-computed results written to a MOAB database, as well as the temperature data used to drive structural mechanics computations.

Tautges, Timothy J.↗

Comparison of Fission Product Release Predictions using PARFUME with Results from the AGR-2 Irradiation Experiment

The PARFUME (PARticle FUel ModEl) code was used to predict fission product release from tristructural isotropic (TRISO) coated fuel particles and compacts during the second irradiation experiment (AGR-2) of the Advanced Gas Reactor Fuel Development and Qualification Program. The PARFUME model for the Advanced Gas reactor (AGR)GR-2 experiment used the fuel compact volume average temperature for each of the 560 days of irradiation to calculate the release of fission products of silver, cesium, and strontium from a representative particle for a select number of AGR -2 compacts. In addition, safety tests were performed on 15 compacts ranging from 1500 to 1800°C to determine fission product release at temperatures that bound reactor accident conditions. PARFUME was used to calculate the fission product release of silver, cesium, strontium, and krypton during these safety tests. Post-irradiation examination (PIE) measurements provided the data on release of fission products from the fuel compacts and fuel particles, and retention of fission products in the compacts outside the silicon carbide (SiC) layer. The predicted fraction release from PARFUME was then compared to PIE measurements.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Aluminum cladding oxide growth prediction for high flux research reactors

Aluminum cladding oxidation of research-reactor fuel elements at high power conditions has a disadvantageous effect on fuel performance due to the lower thermal conductivity of the oxide. The oxide growth prediction models available in the literature were mostly developed for low power conditions. To examine the applicability of the models to high power and high temperature test conditions, the models were studied by coupling with the most frequently employed heat transfer coefficient (HTC) correlations including the Dittus-Boelter correlation, the Colburn correlation, the Sieder-Tate correlation, and KAERI-developed correlation. The Griess model over-predicted the oxide growth while the KAERI-Griess model under-predicted the oxide growth for high power tests. The Kim model, coupled with the Colburn correlation, gave most consistent results with the measured data from two BR2 experiments. However, the Kim model was found to be inapplicable to the EUHFRR conditions at the peak power locations if it was coupled with the Dittus-Boelter correlation. A revision of the prediction models to more closely agree with the measured data was recommended. Furthermore, AG3NE and AlFeNi cladding types were tested in the E-FUTURE experiment, and a noticeable (although small) reduction in oxide thickness on the AlFeNi cladding was observed. However, this difference was believed to be only a secondary effect considering other uncertainties in model predictions, so no attempt was made to model the alloying effect.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Effects of GdCl{sub 3} on U Electrochemical Properties in LiCl-KCl-UCl{sub 3}-GdCl{sub 3} Salt

Studies on pyro-processing technology have been stimulated in several countries including the United State, Russia, France, Japan, South Korea, and India. The main purpose of this technology is to treat the irradiated nuclear fuel, reduce volume of the nuclear waste, recycle actinides, and close the fast reactor fuel cycle. Therefore, ongoing researches and developments are expected. In pyro-processing, the most important process is an electro-refiner (ER) where uranium and minor actinides are separated on electrode surface while rare earth fission products are accumulated in LiCl- KCl eutectic salt. Due to the fact that the recovery of the U and actinide (An) materials are conducted via an electrolysis, many researchers have been investigating fundamental properties of U in LiCl- KCl system by using various electrochemical techniques. The resulting datasets are useful for effective system operation and development of safeguards in ER system. However, these values have been measured in pure UCl{sub 3} system in LiCl- KCl salt, which may not be practical to the real ER system owing to the fact that a variety of other fission products including An and lanthanide (Ln) are coexisting in the ER system. Therefore, in this work, gadolinium (Gd) was selected as a surrogate material for An or Ln materials in ER system. This is because that Gd has similar physical characteristics to Ln and An elements such as ionic size and reduction potential. By conducting electrochemical methods including cyclic voltammetry (CV), open circuit potential (OCP), and electrochemical impedance spectroscopy (EIS), effects of Gd coexistence on the electrochemical, thermodynamic, and kinetic properties of U were observed. It is hoped that this study will help us further understanding fundamental effect of the Ln/An effect on LiCl- KCl-UCl{sub 3}, yielding closer to the practical ER unit operation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Report on Fuel Cycle Facility Requirements for Deployment of Demonstration Reactors and Potential Evolutionary Fuel Cycle Scenarios

A series of fuel cycle scenarios studies were performed to inform on fuel cycle capacities and facilities needed for large-scale deployment of the Advanced Reactor Demonstration Program (ARDP) reactors and potential future evolutionary fuel cycle scenarios. The reactor deployment and evolutionary fuel cycle scenarios from the present to 2100 were developed based on the following assumptions: 1) achievement of a net-zero emissions economy in the United States by 2050, which requires a nuclear energy generation capacity of ~250 GWe by 2050, 2) the U.S. economic growth of 1% per year from 2051 to 2100, which results in ~340 GWe of nuclear energy capacity in 2100, and 3) commercial-scale recycling and high burnup fuel technologies are available after 2050. Thus, evolutionary fuel cycles with those advanced nuclear technologies start after 2050. A single once-through fuel cycle scenario was assumed from the present to 2050 to achieve a net-zero emissions economy in the United States, and the following four evolutionary fuel cycle scenarios from 2051 to 2100 were considered, 1) Once through fuel cycle with ARDP reactors (Natrium and Xe-100), 2) Once-through fuel cycle with Breed-and-Burn (B&B) fast reactors, 3) Recycling fuel cycle of used metallic fuel in fast reactors, and 4) Recycle fuel cycle of both used uranium oxide and metallic fuels in fast reactors. The projected front-end and back-end fuel cycle capacity demands are compared with the current domestic and global (if needed) fuel cycle capacities.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Review Paper: Review of Instrumentation for Irradiation Testing of Nuclear Fuels and Materials

Over 50 years of nuclear fuels and materials irradiation testing has led to many countries developing significant improvements in instrumentation to monitor physical parameters and to control the test conditions in material test reactors (MTRs). Recently, there is increased interest to irradiate new materials and reactor fuels for advanced pressurized water reactors and Gen-IV reactor systems, such as sodium-cooled fast reactors, very high temperature reactors, supercritical water-cooled reactors, and gas-cooled fast reactors. This review paper documents the current state of instrumentation technologies in MTRs in the world and summarizes ongoing research efforts to deploy new sensors. As described in this paper, a wide range of sensors is available to measure key parameters of interest during fuels and materials irradiations in MTRs. Ongoing development efforts focus on providing MTR users a wider range of parameter measurements with smaller, higher accuracy sensors.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

In situ synthesis and characterization of uranium carbide using high temperature neutron diffraction

Advances in neutron flux, neutron instrumentation, and sample environments over the past years allowed the development of unique techniques to characterize material synthesis and processing. The available infrastructure at LANL allows to apply these techniques to radioactive materials or materials containing actinides. Here, we present capabilities and results to characterize materials in situ at temperatures above 2000 Celsius degrees such as in loss-of-coolant accidents. Temperatures in excess of 2000 C. degrees are not readily achieved and neutrons are one of a few probes to characterize materials under these conditions. Research in refractory materials, phase diagram studies or accident scenarios for nuclear materials are research areas where such extreme conditions are required. As an example, we present the formation of UC{sub x} from UO{sub 2+x} and graphite in situ using high temperature neutron diffraction with particular focus on resolving the conflicting reports on the crystal structure of non-quenchable cubic UC{sub 2}. The ability to follow the reaction UO{sub 2}+C → UC{sub x}+CO{sub y} in situ with neutron diffraction allows us to conclude that the reaction occurs within minutes over a temperature range of 60 Celsius degrees. The initiation of the reaction is far below the reaction temperature of 2000 C. degrees reported for this reaction in standard text books on actinide chemistry. This may be due to the unusually small ∼100 nm grain size of our UO{sub 2} initial powder. Furthermore, the holding time of several hours reported in the literature would be unnecessary. The neutron diffraction data collected for the cubic high temperature UC{sub 2} phase unambiguously confirmed the disordered C-C dumbbells and excluded structures previously determined by X-ray diffraction.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

NGNP Data Management and Analysis System Analysis and Web Delivery Capabilities

Projects for the Very High Temperature Reactor (VHTR) Technology Development Office provide data in support of Nuclear Regulatory Commission licensing of the very high temperature reactor. Fuel and materials to be used in the reactor are tested and characterized to quantify performance in high-temperature and high-fluence environments. The NGNP Data Management and Analysis System (NDMAS) at the Idaho National Laboratory has been established to ensure that VHTR data are (1) qualified for use, (2) stored in a readily accessible electronic form, and (3) analyzed to extract useful results. This document focuses on the third NDMAS objective. It describes capabilities for displaying the data in meaningful ways and for data analysis to identify useful relationships among the measured quantities. The capabilities are described from the perspective of NDMAS users, starting with those who just view experimental data and analytical results on the INL NDMAS web portal. Web display and delivery capabilities are described in detail. Also the current web pages that show Advanced Gas Reactor, Advanced Graphite Capsule, and High Temperature Materials test results are itemized. Capabilities available to NDMAS developers are more extensive, and are described using a second series of examples. Much of the data analysis efforts focus on understanding how thermocouple measurements relate to simulated temperatures and other experimental parameters. Statistical control charts and correlation monitoring provide an ongoing assessment of instrument accuracy. Data analysis capabilities are virtually unlimited for those who use the NDMAS web data download capabilities and the analysis software of their choice. Overall, the NDMAS provides convenient data analysis and web delivery capabilities for studying a very large and rapidly increasing database of well-documented, pedigreed data.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Transient performance of accident tolerant fuel in design basis accidents

A set of transient analysis has been performed to assess the performance of candidate accident tolerant fuel (ATF) against reference UO{sub 2} fuel with Zircaloy cladding under design basis accident (DBA) conditions. This study examined two ATF options, U{sub 3}Si{sub 2} fuel with SiC cladding and UO{sub 2} fuel with APMT cladding. The accident analyses were conducted using the system code TRACE for a three-loop PWR plant. PARCS standalone full-core calculations were done for each fuel/cladding combination to provide inputs to the TRACE point-kinetics model. The design basis accidents analyzed were a reactivity insertion accident (RIA) and a large break loss-of-coolant accident (LBLOCA). The RIA was simulated by the insertion of a reactivity ramp of $1 (one dollar) in 0.1 s at hot full power (HFP) condition. The LBLOCA was a simulation of a double-ended pipe break in one of the cold legs of the primary loops. Differences in thermal responses of the fuel and the cladding are attributed to their thermal properties. The U{sub 3}Si{sub 2} fuel with its lower volumetric heat capacity and higher thermal conductivity (i.e. higher thermal diffusivity) generally results in a lower fuel temperature than the UO{sub 2} fuel and a correspondingly faster thermal response. Additional calculations for the U{sub 3}Si{sub 2} fuel shows that in a RIA the cladding material, SiC versus Zr, has little impact on the maximum fuel centerline temperature and the PCT (peak cladding temperature). An increase in the hot rod power factor is shown to raise the centerline fuel temperature in a RIA but has little impact on the PCT. The analysis results show that for a relatively fast decay heat driven transient, such as the LBLOCA, the thermal-hydraulics and fuel/cladding thermal properties dictate the overall response more so than the reactivity feedback. The results show that the PCTs in a LBLOCA are similar for all fuel/cladding combinations considered in this study. The LBLOCA analysis also notes the impact of the asymmetry in the system response. The fuel rods in the sector of the core connected to the hot leg of the broken loop (Sector 1 in the PWR model) is shown to have a much lower PCT than fuel rods in the other five sectors of the core. Results of this study indicate that for the two DBAs considered (RIA and LBLOCA) the transient behavior and the resulting peak cladding temperature of the two ATF options (U{sub 3}Si{sub 2} fuel with SiC cladding and UO{sub 2} fuel with APMT cladding) are similar to the standard light-water reactor fuel (UO{sub 2} fuel with Zircaloy cladding). (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Python Package for Fuel Cycle and Waste Management Analysis - 19545

The future of nuclear power utilization in the United States may involve a transition from the once-through light water reactor fuel cycle to a so-called advanced fuel cycle. An advanced fuel cycle may offer improvements in natural resource utilization, reactor safety, and environmental impact. In addition, adoption of an advanced fuel cycle will result in changes in the amount, composition, and disposal of the nuclear wastes they produce. Characteristics intrinsic to the wastes themselves, such as mass and radioactivity at specific times, were used as waste management metrics in the Department of Energy 2014 Fuel Cycle Evaluation and Screening (FCES) study. Binning of these metrics informed fuel cycle according to relative potential benefit. However, waste properties alone cannot qualify management strategy. Therefore, comparing fuel cycles from the perspective of waste management can provide additional insights. To that end, an object-oriented Python package has been developed to perform fuel cycle waste management calculations. The package, named nwpy (short for Nuclear Waste analysis in Python), mimics the mass flow operations reported in the FCES study and interfaces with the ORIGEN-S code to assess metric data as reported in the FCES. In addition, this Python package determines the loading of waste streams into forms suitable for final disposal in a geological repository and uses such data for repository performance assessment. This work describes the Python package methodology, assumptions, and capabilities. As input data, the package requires information about the fuel cycle such as the mass of fuel discharged, the cooling time between reactor discharge and subsequent operations, and the separations process efficiencies and waste forms it produces. In addition, the isotopic composition of the reactor discharge stream, such as that available from the FCES database, is required. With that, it can perform prescribed mass flow and decay operations throughout the back end of the fuel cycle, the latter carried out by the ORIGEN-S code distributed with the SCALE6.2 software suite. The result is time-dependent data characterizing the waste on a per-package basis. Package loading for waste streams depends on the stream form (i.e. UNF vs. HLW, or glass HLW from aqueous reprocessing vs. ceramic HLW from electrochemical processing) and is based on literature review and engineering assumption. As an example of the application of the code, calculations for the areal footprint of direct-contact repositories for different fuel cycles is shown. Development is ongoing, and the package is expected to grow incorporating capabilities for waste management analyses such as waste transportation and radionuclide transport through the biosphere. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

High Conduction Neutron Absorber to Simulate Fast Reactor Environment in an Existing Test Reactor

A need was determined for a thermal neutron absorbing material that could be cooled in a gas reactor environment without using large amounts of a coolant that would thermalize the neutron flux. A new neutron absorbing material was developed that provided high conduction so a small amount of water would be sufficient for cooling thereby thermalizing the flux as little as possible. An irradiation experiment was performed to assess the effects of radiation and the performance of a new neutron absorbing material. Neutron fluence monitors were placed inside specially fabricated holders within a set of drop-in capsules and irradiated for up to four cycles in the Advanced Test Reactor. Following irradiation, the neutron fluence monitor wires were analyzed by gamma and x-ray spectrometry to determine the activities of the activation products. The adjusted neutron fluences were calculated and grouped into three bins – thermal, epithermal and fast to evaluate the spectral shift created by the new material. Fluence monitors were evaluated after four different irradiation periods to evaluate the effects of burn-up in the absorbing material. Additionally, activities of the three highest activity isotopes present in the specimens are given.

Reactor dosimetry, advanced test reactor, Al3Hf sh↗

Nevada National Security Site Demonstration Reactor Siting and Capability Study

The study’s purpose is to identify suitable testbeds within the NNSS for the demonstration of advanced and emerging reactor technologies. These testbeds are envisioned to be existing structures, facilities, or sites that may be suitable for advanced reactor demonstrations, advanced reactor fuel fabrication, or other experimental support for advanced reactor demonstrations. This study examines siting alternatives at NNSS with the objective of identifying locations for near term ARD projects. Included in the outcomes is an evaluation of the quantitative and qualitative factors that must be addressed for each site if selected to host an ARD sponsored demonstration.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

SAM Developments for MSR Modeling (FY21)

An advanced system analysis tool, SAM, is under development for advanced non-LWR reactor safety analysis, including molten salt reactors (MSR). To support the development and utilization of the SAM code for MSR safety analysis and licensing, continuous efforts have been devoted to enhancing code capabilities and updating reference models for the MSRs. This report documents the FY21 progress in SAM code development, capability enhancements, and reference model development to support transient safety analysis of MSRs, including code enhancements in reactor kinetics and reactivity feedback modeling for liquid fuel reactors, updates of the Molten Salt Reactor Experiment (MSRE) primary system model, developments and updates of the molten salt fast reactor (MSFR) model based on EVOL design, and implementation of a drift flux model for modeling gas transport in MSR systems.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Final Report on Isotope Ratio Techniques for Light Water Reactors

The Isotope Ratio Method (IRM) is a technique for estimating the energy or plutonium production in a fission reactor by measuring isotope ratios in non-fuel reactor components. The isotope ratios in these components can then be directly related to the cumulative energy production with standard reactor modeling methods.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Assessment of Coated Particle Fuels for Space Nuclear Power and Propulsion Systems: A Report for the NESC Nuclear Power & Propulsion Technical Discipline Team

This study evaluates terrestrial reactor fuel forms, with an emphasis on the coated particle fuel capability under development by interagency reactor programs, for application to space reactor systems of interest to NASA. A comprehensive review of coated particle fuel readiness and qualification status has been performed. Possible derivative fuel forms based on coated particle fuel manufacture technologies are identified and assessed for fission surface power, nuclear electric propulsion, and nuclear thermal propulsion systems. Assessments for terrestrial coated particle and historic fuels were compared for each system allowing for relative risk and common fuel qualification needs to be identified.

Fission Surface Power↗