Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REACTOR CORE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Comparison of the PLTEMP code flow instability predictions with measurements made with electrically heated channels for the advanced test reactor.

When the University of Missouri Research Reactor (MURR) was designed in the 1960s the potential for fuel element burnout by a phenomenon referred to at that time as 'autocatalytic vapor binding' was of serious concern. This type of burnout was observed to occur at power levels considerably lower than those that were known to cause critical heat flux. The conversion of the MURR from HEU fuel to LEU fuel will probably require significant design changes, such as changes in coolant channel thicknesses, that could affect the thermal-hydraulic behavior of the reactor core. Therefore, the redesign of the MURR to accommodate an LEU core must address the same issues of fuel element burnout that were of concern in the 1960s. The Advanced Test Reactor (ATR) was designed at about the same time as the MURR and had similar concerns with regard to fuel element burnout. These concerns were addressed in the ATR by two groups of thermal-hydraulic tests that employed electrically heated simulated fuel channels. The Croft (1964), Reference 1, tests were performed at ANL. The Waters (1966), Reference 2, tests were performed at Hanford Laboratories in Richland Washington. Since fuel element surface temperatures rise rapidly as burnout conditions are approached, channel surface temperatures were carefully monitored in these experiments. For self-protection, the experimental facilities were designed to cut off the electric power when rapidly increasing surface temperatures were detected. In both the ATR reactor and in the tests with electrically heated channels, the heated length of the fuel plate was 48 inches, which is about twice that of the MURR. Whittle and Forgan (1967) independently conducted tests with electrically heated rectangular channels that were similar to the tests by Croft and by Walters. In the Whittle and Forgan tests the heated length of the channel varied among the tests and was between 16 and 24 inches. Both Waters and Whittle and Forgan show that the cause of the fuel element burnout is due to a form of flow instability. Whittle and Forgan provide a formula that predicts when this flow instability will occur. This formula is included in the PLTEMP/ANL code.Error! Reference source not found. Olson has shown that the PLTEMP/ANL code accurately predicts the powers at which flow instability occurs in the Whittle and Forgan experiments. He also considered the electrically heated tests performed in the ANS Thermal-Hydraulic Test Loop at ORNL and report by M. Siman-Tov et al. The purpose of this memorandum is to demonstrate that the PLTEMP/ANL code accurately predicts the Croft and the Waters tests. This demonstration should provide sufficient confidence that the PLTEMP/ANL code can adequately predict the onset of flow instability for the converted MURR. The MURR core uses light water as a coolant, has a 24-inch active fuel length, downward flow in the core, and an average core velocity of about 7 m/s. The inlet temperature is about 50 C and the peak outlet is about 20 C higher than the inlet for reactor operation at 10 MW. The core pressures range from about 4 to about 5 bar. The peak heat flux is about 110 W/cm{sup 2}. Section 2 describes the mechanism that causes flow instability. Section 3 describes the Whittle and Forgan formula for flow instability. Section 4 briefly describes both the Croft and the Waters experiments. Section 5 describes the PLTEMP/ANL models. Section 6 compares the PLTEMP/ANL predictions based on the Whittle and Forgan formula with the Croft measurements. Section 7 does the same for the Waters measurements. Section 8 provides the range of parameters for the Whittle and Forgan tests. Section 9 discusses the results and provides conclusions. In conclusion, although there is no single test that by itself closely matches the limiting conditions in the MURR, the preponderance of measured data and the ability of the Whittle and Forgan correlation, as implemented in PLTEMP/ANL, to predict the onset of flow instability for these tests leads one to the conclusion that the same method should be able to predict the onset of flow instability in the MURR reasonably well.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Mesh Adaptive Search Optimization in SERPENT2 Stereolithography Geometry

SERPENT2 Monte Carlo program has the capability to model reactor cores by stereolithography (STL) geometry. In this geometry, volumes are defined by the union of triangulated surfaces. Using the STL geometry offers unique benefits, including: 1) the model can be printed on 3D printers; 2) the possibility to use directly geometrical models from Computer-Aided Design (CAD); 3) the capability to perform multi-physics simulations coupling neutronics, thermal-hydraulics, and material science computations. In this work the STL geometry has been created by the CUBIT software, which is designed for finite elements mesh generation. The materials in the STL geometry have been assigned by a simple C program using the colors of the volumes in the CUBIT model. The goal of this work is to minimize the SERPENT2 computing time using mesh adaptive search algorithms. The basic idea is to split the geometry of the core into two zones: one zone containing the fuel elements (including the moderator and the coolant) and the other containing the reflector (and the target zone of the core, if it is driven by an external neutron source). By performing this splitting, two separate meshes are used, which results in a considerable computing time saving. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Ex-Core Radiation Transport Modeling with VERA User Manual

It is important to be able to accurately predict the neutron flux outside the immediate reactor core for a variety of safety and material analyses. Monte Carlo radiation transport calculations are required to produce these high–fidelity ex-core responses. The Virtual Environment for Reactor Applications (VERA) provides the automated capability to launch independent Shift fixed-source and eigenvalue Monte Carlo (MC) calculations for user-specified state points during a standard Virtual Environment for Reactor Applications (VERA) calculation. VERA couples MPACT with COBRA-TF (CTF) to Shift to perform ex-core tallies for multiple state points concurrently, with each component capable of parallel execution on independent processor domains. In these ex-core calculations, MPACT is coupled to CTF and performs the in-core depletion and heat transfer calculation, followed by a fixed-source Shift transport calculation including ex-core regions to produce ex-core responses. The fission source, fuel pin temperatures, moderator temperature and density, boron concentration, and fuel pin depleted isotopic compositions can be transferred to Shift from the MPACT calculation. Specifically, VERA performs fluence calculations in the core barrel outward to the end of the pressure vessel and detector response calculations in ex-core detectors. It also performs the requested tallies in any user-defined ex-core regions. VERA takes advantage of the General Geometry (GG) package in Shift. This gives VERA the flexibility to explicitly model features outside the core barrel, including detailed vessel models, detectors, and power plant details. A very limited set of experimental and numerical benchmarks is available for ex-core simulation comparison. The Consortium for Advanced Simulation of Light Water Reactors has developed a set of ex-core benchmark problems to include as part of the VERA verification and validation set of problems. The ex-core capability in VERA has been tested on small representative assembly problems, multi-assembly problems, as well as quarter-core and full-core problems. VERA View has also been extended to visualize these vessel fluence results from VERA. This manual serves to present a guide to VERA users about the methodology behind ex-core calculations and the details of input, output, and analysis of results from these calculations. Details in this version of the manual are based on features in VERA 4.0.1.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Development of Critical Experiments to Benchmark Moderator Temperature Reactivity Worth

The simulation of nuclear reactors requires being able to accurately model several different interrelated physical processes including neutronics, heat production, fluid/thermal physics, structural mechanics, fuel behavior, chemistry, and balance-of-plant. In order to design and use new types of nuclear reactors, modern codes have been developed which couple together the behavior of these different physical models to accurately consider the feedback effects between different physical effects. The SHARP toolset, part of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) project, is an example of an effort to combine models of neutronics, thermal-hydraulics, and structural mechanics in a coupled simulation to model any type of nuclear reactor as accurately as possible. The validation of multi-physics coupling techniques requires new experimental benchmark experiments specifically designed for that purpose. As a preliminary step towards design of these experiments, a series of measurements have been performed to demonstrate the temperature-dependent neutronic behavior of a well-characterized reactor assembly for comparison with the available codes. The facility adopted for these experiments is Walthousen Reactor Critical Facility (RCF) at Rensselaer Polytechnic Institute (RPI). The RCF is unique in several aspects and provides several advantages to this type of experiment. Built in 1954 by the American Locomotive Company (ALCO), the RCF has been used to design small compact reactors. RPI acquired the facility in 1963, and the highly-enriched uranium fuel was later swapped for low-enriched fuel pins that were excess from the SPERT facility experiments. Nowadays, The RCF is regarded as a teaching and research facility, permitting the training of licensed Senior Reactor Operators, and offering a critical experiments laboratory course to students. The reactor core standard configuration consists of 332 or 333 UO{sub 2} fuel pins, containing a total of 35.2 grams of U- 235 each (4.81 % enriched). The pins are arranged in a regular lattice with a pitch of 1.6256 cm. The number and configuration of these pins are flexible, and the reactor's overall thermal power is limited to no more than 15 W. As the low thermal output of the reactor does not induce any measurable temperature changes, the effect of temperature in the reactor is observed by applying two 18- kW electric heaters to the water moderator, with mechanical agitators to maintain uniformity in moderator temperature. Before beginning experiments, each fuel pin inside the core was surveyed for mechanical defects (bending or warping) that may contribute to uncertainty in core behavior. Every fuel pin has been individually removed from the core and checked for any irregularities on its surface (caused by shocks or usage). About 12 % of the 333 pins were found to have a small degree of warping and were replaced with excess pins available in the facility. In doing this, we made sure all the pins are identical, thereby increasing the accuracy of future models. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Coupling procedure for TRANSURANUS and KTF codes

The nuclear industry aims to ensure safe and economic operation of each single fuel rod introduced in the reactor core. This goal is even more challenging nowadays due to the current strategy of going for higher burn-up (fuel cycles of 18 or 24 months) and longer residence time. In order to achieve that goal, fuel modeling is the key to predict the fuel rod behavior and lifetime under thermal and pressure loads, corrosion and irradiation. In this context, fuel performance codes, such as TRANSURANUS, are used to improve the fuel rod design. The modeling capabilities of the above mentioned tools can be significantly improved if they are coupled with a thermal-hydraulic code in order to have a better description of the flow conditions within the rod bundle. For LWR applications, a good representation of the two phase flow within the fuel assembly is necessary in order to have a best estimate calculation of the heat transfer inside the bundle. In this paper we present the coupling methodology of TRANSURANUS with KTF (Karlsruhe Two phase Flow subchannel code) as well as selected results of the coupling proof of principle. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A Cartesian grid embedded boundary method for solving the Poisson and heat equations with discontinuous coefficients in three dimensions

We present a method for solving Poisson and heat equations with discontinuous coefficients in two- and three-dimensions. It uses a Cartesian cut-cell/embedded boundary method to represent the interface between materials, as described in Johansen and Colella (1998). Matching conditions across the interface are enforced using an approximation to fluxes at the boundary. Overall second order accuracy is achieved, as indicated by an array of tests using non-trivial interface geometries. Both the elliptic and heat solvers are shown to remain stable and efficient for material coefficient contrasts up to 10{sup 6}, thanks in part to the use of geometric multigrid. A test of accuracy when adaptive mesh refinement capabilities are utilized is also performed. An example problem relevant to nuclear reactor core simulation is presented, demonstrating the ability of the method to solve problems with realistic physical parameters.

97 MATHEMATICS AND COMPUTING↗

Dynamic Monte Carlo Transient Analysis with Thermal-Hydraulic Feedback by McCARD/CUPID

The reactor core transient analysis requires neutronics calculations with the thermal-hydraulic (TH) feedback. Recently the dynamic Monte Carlo (DMC) neutron transport algorithm controlling delayed neutron precursors was developed and successfully applied for core transient problems with help of a sub-channel code. In the Seoul National University Monte Carlo (MC) code, McCARD, a DMC scheme for the core transient analysis has been implemented by coupling with a computational fluid dynamics code, CUPID using the TCP/IP socket communication. In the McCARD/CUPID transient calculations, temperature-dependent cross sections are produced by a built-in on-the-fly Doppler broadening (OTF DB) module. This paper presents McCARD/CUPID transient analysis results for a triangular unit cell problem in the IAEA coordinated research project (CRP) benchmark on the high temperature gas cooled reactor (HTGR) uncertainty analysis. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Time series analysis and Monte Carlo methods for eigenvalue separation in neutron multiplication problems

A time series approach has been applied to the nuclear fission source distribution generated by Monte Carlo (MC) particle transport in order to calculate the non-fundamental mode eigenvalues of the system. The novel aspect is the combination of the general technical principle of projection pursuit for multivariate data with the neutron multiplication eigenvalue problem in the nuclear engineering discipline. Proof is thoroughly provided that the stationary MC process is linear to first order approximation and that it transforms into one-dimensional autoregressive processes of order one (AR(1)) via the automated choice of projection vectors. The autocorrelation coefficient of the resulting AR(1) process corresponds to the ratio of the desired mode eigenvalue to the fundamental mode eigenvalue. All modern MC codes for nuclear criticality calculate the fundamental mode eigenvalue, so the desired mode eigenvalue can be easily determined. This time series approach was tested for a variety of problems including multi-dimensional ones. Numerical results show that the time series approach has strong potential for three dimensional whole reactor core. The eigenvalue ratio can be updated in an on-the-fly manner without storing the nuclear fission source distributions at all previous iteration cycles for the mean subtraction. Lastly, the effects of degenerate eigenvalues are investigated and solutions are provided.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Whitepaper on Uncertainty Quantification for MPACT

The MPACT code provides the ability to perform high-fidelity deterministic calculations to obtain a wide variety of detailed results for very complex reactor core models. However, MPACT currently does not have the capability to propagate the effects of input data uncertainties to provide uncertainties in the calculated results. This white paper discusses a potential method for MPACT uncertainty quantification (UQ) based on stochastic sampling.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

FY26 Progress on Demonstration of a Multiphysics Steady State Capability for Modeling Core Radial Expansion in SFRs

Under the U.S. Department of Energy Office of Nuclear Energy Advanced Modeling and Simulation (NEAMS) Program, an integrated multiphysics approach is being developed to model the core bowing phenomena important to liquid metal-cooled fast reactors. Core bowing is an important passive safety mechanism in liquid metal-cooled fast reactors and involves multiphysics effects including radiation transport, fluid flow, heat transfer, and mechanical response to temperature and flux gradients. This report summarizes recent progress on developing a multiphysics, MOOSE-based workflow to predict core bowing and associated reactivity feedback. Significant new capabilities in the reactor physics code Griffin - sodium backfill and pin power reconstruction for deformed geometries - were applied in this effort. This year’s work included verification, code comparisons, sensitivity studies, and coupled demonstrations that advance the state of MOOSE-based core bowing workflow. Griffin’s sodium backfill capability was verified by demonstrating that its automated treatment of geometry expansion and material-density updates reproduces manual calculations exactly, confirming solid mass conservation and proper coolant backfilling in expanded geometries. Reconstructed pin powers were compared for Griffin’s ductheterogeneous and ring-heterogeneous treatments in single-, seven-, and nineteen-assembly cases, with best agreement observed in lower-leakage configurations and the duct-heterogeneous approach offering substantially lower computational cost. Thermal-hydraulic sensitivity sensitivities showed that MOOSE SCM, SAM, and CFD are expected to produce similar deformation predictions despite variances in their temperature predictions, and that explicit treatment of inter-assembly flow becomes increasingly important as gap flow rate increases. Finally, coupled demonstrations on small multi-assembly configurations using Griffin, MOOSE Solid Mechanics, MOOSE SCM, and Heat Conduction produced physically consistent reactivity feedback from thermal expansion and bowing. The coupled demonstrations simulated grid plate expansion as well as resultant core bowing at full power conditions. Simplifications were made in current workflow, namely the assumption of instantaneous full power conditions following hot zero power, and pre-expanding the Griffin geometry axially due to lack of an axial fuel pin expansion model and temperature feedback to Griffin.

Wozniak, Nicholas↗

Convective heat transfer to CO{sub 2} at a supercritical pressure flowing vertically upward in tubes and an annular channel

The Super-Critical Water-Cooled Reactor (SCWR) has been chosen by the Generation IV International Forum as one of the candidates for the next generation nuclear reactors. Heat transfer to water from a fuel assembly may deteriorate at certain supercritical pressure flow conditions and its estimation at degraded conditions as well as in normal conditions is very important to the design of a safe and reliable reactor core. Extensive experiments on a heat transfer to a vertically upward flowing CO{sub 2} at a supercritical pressure in tubes and an annular channel have been performed. The geometries of the test sections include tubes of an internal diameter (ID) of 4.4 and 9.0 mm and an annular channel (8 x 10 mm). The heat transfer coefficient (HTC) and Nusselt numbers were derived from the inner wall temperature converted by using the outer wall temperature measured by adhesive K-type thermocouples and a direct (tube) or indirect (annular channel) electric heating power. From the test results, a correlation, which covers both a deteriorated and a normal heat transfer regime, was developed. The developed correlation takes different forms in each interval divided by the value of parameter Bu. The parameter Bu (referred to as Bu hereafter), a function of the Grashof number, the Reynolds number and the Prandtl number, was introduced since it is known to be a controlling factor for the occurrence of a heat transfer deterioration due to a buoyancy effect. The developed correlation predicted the HTCs for water and HCFC-22 fairly well. (author)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

limiting rods selection in large break LOCA analysis with the RELAP5-3D code

The Nuclear Regulatory Commission (NRC) is proposing a new rulemaking on emergency core system/loss-of-coolant accident (LOCA) performance analysis. In the proposed rulemaking, designated as 10 CFR 50.46(c), the US NRC put forward an equivalent cladding oxidation criterion as a function of cladding pre-transient hydrogen content. The proposed rulemaking imposes more restrictive and burnup-dependent cladding embrittlement criteria; consequently more fuel rods need to be analyzed under LOCA conditions to maintain the safety margin, compared to the current practice in which only one hot rod needs to be analyzed. New analysis methods are required to provide a thorough characterization of the reactor core in order to identify the locations of the limiting rods under LOCA conditions. In this work, the best-estimate plus uncertainty analysis capability for large break LOCA with the new cladding embrittlement criteria using the RELAP5-3D code is established and demonstrated with a reduced set of uncertainty parameters. With the new analysis method, the limiting transient case and the limiting rods can be easily identified in response to the proposed new rulemaking. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Predictive Reactor Pressure Vessel Steel Irradiation Embrittlement Models: Issues and Opportunities

Nuclear plant life extension to 80 years will require accurate predictions of neutron irradiation-induced increases in the ductile-brittle transition temperature ( T) of reactor pressure vessel (RPV) steels at high fluence conditions that are far outside the existing database. Remarkable progress in mechanistic understanding of irradiation embrittlement has led to physically motivated T correlation models that provide excellent statistical fi ts to the existing surveillance database. However, an important challenge is developing advanced embrittlement models for low fl ux-high fl uence conditions pertinent to extended life. These new models must also provide better treatment of key variables and variable combinations and account for possible delayed formation of late blooming phases in low copper steels. Other issues include uncertainties in the compositions of actual vessel steels, methods to predict T attenuation away from the reactor core, verifi cation of the master curve method to directly measure the fracture toughness with small specimens and predicting T for vessel annealing remediation and re-irradiation cycles.

36 MATERIALS SCIENCE↗

Reactivity-initiated accident simulation to inform transient testing of candidate advanced cladding

This paper leverages three-dimensional reactor-core-simulation capabilities to provide information on appropriate experimental test conditions for candidate advanced cladding materials in a control-rod-ejection event. These test conditions use three-dimensional nodal kinetics simulations of a reactivity-initiated accident (RIA) in a representative state-of-the-art pressurized water reactor with both nuclear-grade iron-chromium-aluminum (FeCrAl) and silicon-carbide (SiC-SiC)-based cladding materials. The effort yields boundary conditions for experimental mechanical tests, specifically peak cladding strain during the power pulse following the rod ejection. The impact of candidate cladding materials on the reactor kinetics behavior of RIA progression versus that of reference Zr cladding is predominantly due to differences in -1) fuel mass/volume/specific power density, -2) spectral effects due to parasitic neutron absorption, -3) control rod worth due to hardened (or softened) spectrum, and -4) initial conditions due to power peaking and neutron transport cross sections in the equilibrium cycle cores resulting from hardened (or softened) spectrum. This study shows minimal impact of SiC-SiC-based cladding configurations on the transient response versus reference Zircaloy cladding. However, the FeCrAl cladding response indicates similar energy deposition, but with significantly shorter pulses of higher magnitude. Therefore, the FeCrAl-based cases have a more rapid fuel thermal expansion rate, and the resultant pellet-cladding interaction occurs more rapidly. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Accident Performance of Light Water Reactor Cladding Materials

During a loss of coolant accident as experienced at Fukushima, inadequate cooling of the reactor core forces component temperatures ever higher where they must withstand aggressive chemical environments. Conventional zirconium cladding alloys will readily oxidize in the presence of water vapor at elevated temperatures, rapidly degrading and likely failing. A cladding breach removes the critical barrier between actinides and fission products and the coolant, greatly increasing the probability of the release of radioactivity in the event of a containment failure. These factors have driven renewed international interest in both study and improvement of the materials used in commercial light water reactors. Characterization of a candidate cladding alloy or oxidation mitigation technique requires understanding of both the oxidation kinetics and hydrogen production as a function of temperature and atmosphere conditions. Researchers in the MST division supported by the DOE-NE Fuel Cycle Research and Development program are working to evaluate and quantify these parameters across a wide range of proposed cladding materials. The primary instrument employed is a simultaneous thermal analyzer (STA) equipped with a specialized water vapor furnace capable of maintaining temperatures above 1200°C in a range of atmospheres and water vapor contents. The STA utilizes thermogravimetric analysis and a coupled mass spectrometer to measure in situ oxidation and hydrogen production of candidate materials. This capability is unprecedented in study of materials under consideration for reactor cladding use, and is currently being expanded to investigate proposed coating techniques as well as the effect of coating defects on corrosion resistance.

08 HYDROGEN↗

Inhibition of Oxidation in Nuclear Graphite

Graphite is a fundamental material of high temperature gas cooled nuclear reactors, providing both structure and neutron moderation. Its high thermal conductivity, chemical inertness, thermal heat capacity, and high thermal structural stability under normal and off normal conditions contribute to the inherent safety of these reactor designs. One of the primary safety issues for a high temperature graphite reactor core is the possibility of rapid oxidation of the carbon structure during an off normal design basis event where an oxidizing atmosphere (air ingress) can be introduced to the hot core. Although the current Generation IV high temperature reactor designs attempt to mitigate any damage caused by a postualed air ingress event, the use of graphite components that inhibit oxidation is a logical step to increase the safety of these reactors. Recent experimental studies of graphite containing between 5.5 and 7 wt% boron carbide (B4C) indicate that oxidation is dramatically reduced even at prolonged exposures at temperatures up to 900°C. The proposed addition of B4C to graphite components in the nuclear core would necessarily be enriched in B-11 isotope in order to minimize B-10 neutron absorption and graphite swelling. The enriched boron can be added to the graphite during billet fabrication. Experimental oxidation rate results and potential applications for borated graphite in nuclear reactor components will be discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Performance of the (n,{gamma})-Based Positron Beam Facility NEPOMUC

The in-pile positron source of NEPOMUC at the neutron source Heinz Maier-Leibnitz (FRM II) provides at the experimental site an intense beam of monoenergetic positrons with selectable energy between 15 eV and 3 keV. The principle of the source is based on neutron capture gamma rays produced by cadmium in a beam tube tip close to the reactor core. The gamma ray absorption in platinum produces positrons which are moderated and formed to the beam. An unprecedented beam intensity of 9.10{sup 8} e{sup +}/s is achieved (1 keV). The performance and applications of the facility are presented.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Investigation of Xenon Oscillations via Point Kinetics

We all appreciate the special role Xenon-135 plays in reactor transients. Unless there is sufficient reactivity override, on shutdown a conventional reactor cannot immediately restart because of the buildup of strongly absorbing Xenon from Iodine decay and the absence of neutron flux to continue its elimination. We are also aware of how the flux imbalance in a large reactor core gives rise to Xenon induced power precession around the core in unpredictable ways. In addition, with regard to computational methods, we lack readily accessible numerical algorithms enabling reliable characterization of Xenon oscillations with simple models to explain this fundamentally important phenomenon. Nowhere is this more apparent than in the classroom. In this presentation, we first consider a new 12-element comprehensive decay model to Xenon and its corresponding numerical implementation and verification to establish a predictive model of Xenon buildup in a constant flux. We then follow with a reduced self-consistent flux model in an infinite reactor- a model not found in textbooks. This presentation should appeal to those interested in developing high order numerical methods for reactor transients.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗