Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RADIOACTIVE SOURCES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

An integral test of the inelastic cross sections of Pb and Mo using measured neutron spectra

Comparison of measurements and calculations of fast neutron spectra from a radioactive neutron source inside spheres of Mo or Pb and from a cylindrical reactor containing a thick Pb or Mo reflector are used as a test of ENDF cross sections. The sphere leakage spectra were measured at a sphere-to-spectrometer distance of 2 meters using a 54 Ci spherical Am-Be neutron source. Reactor leakage spectrum measurements were made at the surface of the ZP-1 reactor when bare, with a Pb radial reflector 21 cm thick, and with a metallic Mo radial reflector 10 cm thick. In the case of the thin Mo sphere there is agreement between the calculation and measurement. The Pb calculation is much lower than the measurement except at the highest neutron energy. Two-dimensional calculations of reactor spectra result indicate that the reactor source is reasonably well known. Significant differences in leakage spectrum shape for both Mo and Pb reflectors suggest that there are large uncertainties in the inelastic cross sections for Pb and some for Mo.

Shook, D. F.↗

Design, fabrication and calibration of alpha particle densitometers for measuring planetary atmospheric density

An alpha particle densitometer was developed for possible application to measurement of the atmospheric density-altitude profile on Martian entry. The device uses an Am-241 radioactive-foil source, which emits a distributed energy spectrum, located about 25 to 75 cm from a semiconductor detector. System response - defined as the number of alphas per second reaching the detector with energy above a fixed threshold - is given for Ar and CO2. The altitude profile of density measurement accuracy is given for a pure CO2 atmosphere with 5 mb surface pressure. The entire unit, including dc-dc converters, requires less than 350 milliwatts of power from +28 volts, weighs about 0.85 lb and occupies less than 15 cubic inches volume.

Sellers, B.↗

Lunar thermal history revisited.

New information is used to demonstrate that better models for the thermal history of the moon are required. As a first step, account is taken of (1) a nonuniform initial composition in terms of fraction of low melting to high melting phase present, and for variation in the uranium, potassium, and thorium contents as a function of depth, (2) partitioning of the radioactive elements between the melt and the solid phases, and (3) a cutoff value of melt which must be exceeded before magma can move to the surface. The results of several attempts to determine whether reasonable conditions, composition, and thermal properties can be expected to give rise to two separate periods of volcanism are discussed. Two models with somewhat different distributions of radioactive heat sources and different conductivities are examined.

Mcconnell, R. K., Jr.↗

Possible thermal history of the moon.

The possible thermal history of the moon is investigated by means of theoretical models. The calculations include the effects of melting and time-dependent redistribution of radioactive heat sources. The known constraints can best be satisfied by a model which is characterized by relatively high initial temperatures close to the melting range; melting and, consequently, fractionation and redistribution of radionuclides would occur during the first 1.5 b.y. and would then be followed by an effective cooling process. Heat flow measurements on the lunar surface should permit a distinction between such a completely fractionated model and a nonfractionated model or a model with restricted fractionation in the outer few hundred kilometers.

Fricker, P. E.↗

Role of convection in the moon.

Conduction solutions of the problem of the moon's thermal history can be unstable to solid state convection. To examine the role of solid convection, the stability of models in which the initial distribution of radioactive heat sources is homogeneous and the initial temperature profile is due to accretional heating is analyzed in detail. Growth rates of instabilities are compared with the appropriate conduction times in order to determine the effective viscosities for which solid convection is a dominant process. It is found that instability growth may not have been rapid enough to prevent the extensive partial melting predicted by conduction theory, but convection after resolidification is likely to have occurred, and thus the moon would have cooled faster than it would if it were purely conducting.

Cassen, P.↗

On the thermal evolution of the terrestrial planets

Physical and chemical constraints for such different planetary objects as the earth, the moon and meteorite parent bodies can best be satisfied by thermal history models having high initial temperatures. On the basis of thermal calculations it is suggested that the evolution of the other terrestrial planets (Mars, Venus and Mercury) was also characterized by high initial temperatures. Under these conditions, melting and, consequently, fractionation would set in at an early stage. Because of the resulting redistribution of the long-lived radioactive heat sources and the concentration of these elements in the surface layers, large-scale differentiation could be achieved by partial melting.

Fricker, P. E.↗

The evolution of the moon

The thermal evolution of the moon as it can be defined by the available data and theoretical calculations is discussed. A wide assortment of geological, geochemical and geophysical data constrain both the present-day temperatures and the thermal history of the lunar interior. On the basis of these data, the moon is characterized as a differentiated body with a crust, a 1000-km-thick solid mantle (lithosphere) and an interior region (core) which may be partially molten. The presence of a crust indicates extensive melting and differentiation early in the lunar history. The ages of lunar samples define the chronology of igneous activity on the lunar surface. This covers a time span of about 1.5 billion years, from the origin to about 3.16 billion years ago. Most theoretical models require extensive melting early in the lunar history, and the outward differentiation of radioactive heat sources.

Toksoz, M. N.↗

On the cooling of the moon by solid convection

If a molten, or partially molten, lunar core exists at present, constraints would be placed on the viscosity of the solid mantle and the distribution of radioactive heat sources. Models in which the heat sources have been concentrated near the surface would rapidly solidify if the effective viscosity did not exceed 10 to the 22nd power sq cm/sec. Retention of most of the heat sources throughout the mantle would permit present day solid convection to occur without cooling the core.

Cassen, P. M.↗

Implications of an internal dynamo for the thermal history of Mercury

Constraints placed on the thermal evolution of Mercury by the dynamo model of the planet's magnetic field are investigated. It is assumed that Mercury is a differentiated planet possessing an iron-nickel core with a radius approximately three-fourths of the planetary radius, that the mantle is made of silicates with thermal and rheological properties similar to those of earth's upper mantle, and that differentiation was a global process which resulted in the removal of radioactive heat sources from the core and the upward segregation of heat sources in the mantle. These assumptions are found to lead to the conclusion that the existence of a molten core requires the retention of a minimum concentration of heat sources throughout the mantle, the value being comparable to the mantle-wide average concentration for earth. Thus, it is suggested that the differentiation of Mercury could not have resulted in the complete removal of heat sources from the mantle into a crust near the planet's surface.

Cassen, P.↗

The relationship between crustal tectonics and internal evolution in the moon and Mercury

The relationship between crustal tectonics and thermal evolution is discussed in terms of the moon and Mercury. Finite strain theory and depth and temperature-dependent thermal expansion are used to evaluate previous conclusions about early lunar history. Factors bringing about core differentiation in the first 0.6 b.y. of Mercurian evolution are described. The influence of concentrating radioactive heat sources located in Mercury's crust on the predicted contraction is outlined. The predicted planetary volume change is explored with regard to quantitative limits on the extent of Mercurian core solidification. Lunar and Mercurian thermal stresses involved in thermal evolution are reviewed, noting the history of surface volcanism. It is concluded that surface faulting and volcanism are closely associated with the thermal evolution of the whole planetary volume. As the planet cools or is heated, several types of tectonic and volcanic effects may be produced by thermal stress occurring in the lithosphere.

Solomon, S. C.↗

Convection and lunar thermal history

The effects of solid interior convection on the thermal history of the moon are examined. Convective models of lunar evolution are calculated to demonstrate the influence of various viscosities, radioactive heat source distributions and initial temperature profiles and tested by means of a thermal history simulation code. Results indicate that solid convection does not necessarily produce a quasi-steady thermal balance between heat sources and surface losses. The state of the lithosphere is found to be sensitive to the efficiency of heat source redistribution, while that of the convecting interior depends primarily on rheology. Interior viscosities of 10 to the 21st to 10 to the 22nd cm/sec are obtained, along with a central temperature above 1100 C. It is suggested that mare flooding could have been the result of magma production by pressure release melting in the upwelling region of convection cells.

Cassen, P.↗

Electrical conductivity anomalies associated with circular lunar maria

A strong anisotropy is observed in magnetic field fluctuations measured by the Lunokhod 2 magnetometer located on the eastern edge of Mare Serenitatis. This anisotropy can be explained by a regional anomaly in the subsurface electrical conductivity distribution associated with the mare similar to the proposed conductivity anomaly associated with Mare Imbrium. The Serenitatis magnetic field anisotropy is compared to the field fluctuation measured by the Apollo 16 magnetometer 1100 km to the south, and this comparison indicates that the subsurface conductivity distribution can be modeled by a nonconducting layer in the lunar lithosphere which is 150 km thick beneath the highlands and 300 km thick beneath Serenitatis. The decrease in electrical conductivity of the upper mantle beneath the mare may result from lower temperatures due to transport of thermal energy and radioactive heat sources to the surface during mare flooding. This proposed anomaly, along with that proposed for Mare Imbrium, strengthens the possibility of regional anomalies in electrical conductivity associated with all circular lunar maria.

Dyal, P.↗

A radionuclide counting technique for measuring wind velocity

A technique for measuring wind velocities of meteorological interest is described. It is based on inverse-square-law variation of the counting rates as the radioactive source-to-counter distance is changed by wind drag on the source ball. Results of a feasibility study using a weak bismuth 207 radiation source and three Geiger-Muller radiation counters are reported. The use of the technique is not restricted to Martian or Mars-like environments. A description of the apparatus, typical results, and frequency response characteristics are included. A discussion of a double-pendulum arrangement is presented. Measurements reported herein indicate that the proposed technique may be suitable for measuring wind speeds up to 100 m/sec, which are either steady or whose rates of fluctuation are less than 1 kHz.

Singh, J. J.↗

Hard emission at late times from SN 1987A

A model for the explosion that has been successful in predicting and explaining the evolution of SN 1987A during its first one and one-half years is used to calculate the future photometric evolution of the supernova in the UV-optical-IR, X-ray, and gamma-ray bands using Monte Carlo techniques. Special attention is given to the contribution from radioactive isotopes other than Co-56, notably Co-57, Ti-44, and Na-22, and to the possible appearance, probably within the next year, of X-rays from an accreting magnetic neutron star at the center of the supernova. The signature of a radio pulsar like the Crab is also considered. In both cases the time history of the bolometric light curve may be a more sensitive diagnostic than the existence of either pulses or hard emission, but will become confused in the near future by contributions from the rare radioactivities. A source as faint as the pulsed emission of the Crab pulsar will never be discernable in the bolometric light curve. Pulsed hard emission is best sought near 30 keV near the end of 1989 (and thereafter), although more sensitive instrumentation than hitherto employed may be necessary.

Woosley, S. E.↗

The Copernicus project

The Copernicus spacecraft, to be launched on May 4, 2009, is designed for scientific exploration of the planet Pluto. The main objectives of this exploration is to accurately determine the mass, density, and composition of the two bodies in the Pluto-Charon system. A further goal of the exploration is to obtain precise images of the system. The spacecraft will be designed for three axis stability control. It will use the latest technological advances to optimize the performance, reliability, and cost of the spacecraft. Due to the long duration of the mission, nominally 12.6 years, the spacecraft will be powered by a long lasting radioactive power source. Although this type of power may have some environmental drawbacks, currently it is the only available source that is suitable for this mission. The planned trajectory provides flybys of Jupiter and Saturn. These flybys provide an opportunity for scientific study of these planets in addition to Pluto. The information obtained on these flybys will supplement the data obtained by the Voyager and Galileo missions. The topics covered include: (1) scientific instrumentation; (2) mission management, planning, and costing; (3) power and propulsion system; (4) structural subsystem; (5) command, control, and communication; and (6) attitude and articulation control.

Barnstable, Bob↗

Emission processes and dynamics of hot gases in astrophysics

A detailed model was developed for Kepler's supernova remnant (SNR). Observations of the SNR revealed a strong interaction with the surrounding circumstellar medium, which was studied through both analytical and numerical calculations. Effects were studied of electron thermal conduction on the structure of radiative interstellar shock waves. An explanation is sought for the observed line emission from metal rich ejecta in SNR, incorporating atomic data. Light echoes around SN 1987A was also studied. Analysis of infrared and scattered circumstellar light echoes was accomplished with early observations to set limits on the mass of circumstellar dust. Work was completed on the emission from heavy element gas ejected in the supernova explosion of massive stars. It was assumed that a radioactive energy source was present and calculated the detailed heating and ionization of the gas. The evolution was studied of SNR in the very high pressure environment of a starburst galaxy.

Chevalier, Roger A.↗

Solar measurements from the Airglow-Solar Spectrometer Instrument (ASSI) on the San Marco 5 satellite

The analysis of the solar spectral irradiance from the Airglow-Solar Spectrometer Instrument (ASSI) on the San Marco 5 satellite is the focus for this research grant. A pre-print copy of the paper describing the calibrations of and results from the San Marco ASSI is attached to this report. The calibration of the ASSI included (1) transfer of photometric calibration from a rocket experiment and the Solar Mesosphere Explorer (SME), (2) use of the on-board radioactive calibration sources, (3) validation of the ASSI sensitivity over its field of view, and (4) determining the degradation of the spectrometers. We have determined that the absolute values for the solar irradiance needs adjustment in the current proxy models of the solar UV irradiance, and the amount of solar variability from the proxy models are in reasonable agreement with the ASSI measurements. This research grant also has supported the development of a new solar EUV irradiance proxy model. We expected that the magnetic flux is responsible for most of the heating, via Alfen waves, in the chromosphere, transition region, and corona. From examining time series of solar irradiance data and magnetic fields at different levels, we did indeed find that the chromospheric emissions correlate best with the large magnetic field levels.

Woods, Thomas N.↗

Low Intensity Low Temperature (LILT) measurements and coefficients on new photovoltaic structures

Past NASA missions to Mars, Jupiter, and the outer planets were powered by radioisotope thermal generators (RTG's). Although these devices proved to be reliable, their high cost and highly toxic radioactive heat source has made them far less desirable for future planetary missions. This has resulted in a renewed search for alternate energy sources, some of them being photovoltaic (PV) and thermophotovoltaic (TPV). Both of these alternate energy sources convert light/thermal energy directly into electricity. In order to create a viable PV and TPV data base for planetary mission planners and cell designers, we have compiled low temperature low intensity (LILT) I-V data on single junction and multi-junction high efficiency solar cells. The cells tested here represent the latest photovoltaic technology. Using this LILT data to calculate dI(sub SC)/dT, dV(sub OC)/dT, dFF/dT, and also as a function of intensity, an accurate prediction of cell performance under the AMO spectrum can be determined. When combined with QUantum efficiency at Low Temperature (QULT) data, one can further enhance the data by adding spectral variations to the measurements. This paper presents an overview of LILT measurements and is only intended to be used as a guideline for material selection and performance predictions. As single junction and multi-junction cell technologies emerge, new test data must be collected. Cell materials included are Si, GaAs/Ge, GainP/GaAs/Ge, InP, InGaAs/InP, InP/InGaAs/InP, and GainP. Temperatures range as low as -175 C and intensities range from 1 sun to .02 suns.

Schelman, David A.↗