Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RADIATION FLUX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

The Impulse Approximation Scattering Function and Its Use in Monte Carlo Photon Transport Simulations

The viability of using the impulse approximation scattering function in Monte Carlo photon transport simulations is explored. This scattering function can be constructed from the double differential incoherent scattering cross section developed by Ribberfors and Berggren. A commonly used method for modeling photon Doppler broadening, which is referred to as the hybrid Doppler broadening method, can also be derived from this cross section. A new photon Doppler broadening method, called the consistent Doppler broadening method, is derived and discussed. This method eliminates some of the commonly employed approximations in the hybrid Doppler broadening method, in part, by using the impulse approximation scattering function. Integrated incoherent cross sections generated using the impulse approximation scattering function and the widely used Waller-Hartree scattering function are in good agreement above 20 keV. Below 20 keV, differences as high as 70% are observed, which differs from the roughly 5% differences observed by Ribberfors for some of the materials. Integral and spectral quantities for two problems are also generated using the Monte Carlo photon transport capabilities of the Framework for REsearch in Nuclear ScIence and Engineering (FRENSIE). Due to the small, relative result differences observed when using the impulse approximation scattering function, it is considered a viable alternative to the Waller-Hartree scattering function. In addition, some small, but expected, differences in spectral fluxes at low energies can be avoided by adopting the consistent Doppler broadening method.

42 ENGINEERING↗
DOE OSTI2020

Focusing a round coherent beam by spatial filtering the horizontal source

This paper illustrates the use of spatial filtering with a horizontal slit near the source to enlarge the horizontal coherence in an experimental station and produce a diffraction-limited round focus at an insertion device beamline for X-ray photon correlation spectroscopy experiments. Simple expressions are provided to guide the optical layout, and wave propagation simulations confirm their applicability. The two-dimensional focusing performance of Be compound refractive lenses to produce a round diffraction-limited focus at 11 keV capable of generating a high-contrast speckle pattern of an aerogel sample is demonstrated. The coherent scattering patterns have comparable speckle sizes in both horizontal and vertical directions. The focal spot sizes are consistent with hybrid ray-tracing calculations. Producing a two-dimensional focus on the sample can be helpful to resolve speckle patterns with modern pixel array detectors with high visibility. This scheme has now been in use since 2019 for the 8-ID beamline at the Advanced Photon Source, sharing the undulator beam with two separate beamlines, 8-ID-E and 8-ID-I at 7.35 keV, with increased partially coherent flux, reduced horizontal spot sizes on samples, and good speckle contrast.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Metagenome‐Assembled Genomes for Oligotrophic Nitrifiers From a Mountainous Gravelbed Floodplain

Riparian floodplains are important regions for biogeochemical cycling, including nitrogen. Here, we present MAGs from nitrifying microorganisms, including ammonia-oxidising archaea (AOA) and comammox bacteria from Slate River (SR) floodplain sediments (Crested Butte, CO, US). Additionally, we explore MAGs from potential nitrite-oxidising bacteria (NOB) from the Nitrospirales. AOA diversity in SR is lower than observed in other western US floodplain sediments and Nitrosotalea-like lineages such as the genus TA-20 are the dominant AOA. No ammonia-oxidising bacteria (AOB) MAGs were recovered. Microorganisms from the Palsa-1315 genus (clade B comammox) are the most abundant ammonia-oxidizers in SR floodplain sediments. Established NOB are conspicuously absent; however, we recovered MAGs from uncultured lineages of the NS-4 family (Nitrospirales) and Nitrospiraceae that we propose as putative NOB. Nitrite oxidation may be carried out by organisms sister to established Nitrospira NOB lineages based on the genomic content of uncultured Nitrospirales clades. Nitrifier MAGs recovered from SR floodplain sediments harbour genes for using alternative sources of ammonia, such as urea, cyanate, biuret, triuret and nitriles. In conclusion, the SR floodplain therefore appears to be a low ammonia flux environment that selects for oligotrophic nitrifiers.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Spectral characterization of flash and high flux x-ray radiographic sources with a magnetic Compton spectrometer

In this article, we present a new analysis method applied to revitalize permanent magnet Compton spectrometers used to measure photon energy spectra in the MeV range. The inversion of the measured electron distribution to determine the original photon distribution is achieved via a method of consistent coupled radiation transport and magnetic field mapping of the input photon spectra to the measured electron distribution. The method of linear least squares was used to perform the unfolding of the electron distribution to the initial photon spectra, without any assumptions made regarding the electron distribution. We present an application of this method to data from a nominal 19.4 MeV flash radiographic source (the first axis of the Dual Axis Radiographic Hydro-Test Facility) capable of generating 500 R @ 1 m in ~60 ns and a medical therapy source (a Scanditronix M22, Microtron) capable of variable energies with nominal endpoints of 6, 10, 15, and 20 MeV and an output of ~1000–2000 R/min @ 1 m. The results provide agreement between the modeled and unfolded experimentally measured photon spectra as quantified by statistical tests, from 1.5 to 20 MeV. Experimental results are presented as well as a discussion of the novel MCNP6-based simulations and methods for reconstruction of the spectra.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Microstructural stability of tantalum-alloyed ferritic-martensitic steel with neutron irradiation to 7.4 dpa at ~490 °C

Specimens of a reduced-activation ferritic-martensitic steel, called CNA1, were irradiated to 7.4 displacements per atom at ~490 °C in the High Flux Isotope Reactor. Vickers hardness and tensile properties revealed consistent softening that is attributed to some recovery during irradiation, with reduced laths and dislocation density. Detailed microstructural characterization by transmission electron microscopy and energy dispersive x-ray spectroscopy showed radiation-induced dislocation loops, few cavities, and slight dissolution of M 23 C 6 and MX precipitates. Partial amorphization was only observed in M 23 C 6 precipitated in matrix. Transmutation somewhat destabilized M 23 C 6 and MX, with a stronger effect on the later one by noticeable depletion of Ta with enriched W, which is consistent with the transmutation calculations. The microstructural evolution and associated strength changes were discussed with the assistance of computational thermodynamics.

36 MATERIALS SCIENCE↗
DOE OSTI2023

The physics basis to integrate an MHD stable, high-power hybrid scenario to a cool divertor for steady-state reactor operation

Abstract Coupling a high-performance core to a low heat flux divertor is a crucial step for ITER and a Fusion Pilot Plant or DEMO. Experiments in DIII-D recently expanded the steady-state hybrid scenario to high density and divertor impurity injection to study the feasibility of a radiating mantle solution. This work presents the physics basis for trade-offs between density, current drive and stability to tearing modes (TMs) at high β. EC power is crucial to tailor the plasma profiles into a passively stable state, and to eject impurities from the core. Off-axis EC depositions decrease the heating efficiency, but calculated electron heat transport coefficients show that this effect is partially mitigated by improved confinement inside the EC deposition. Additionally, the reduction in pressure is recovered by increasing the density. This favourable scaling of confinement with density was observed in high power plasmas for years, and this work provides a comprehensive explanation. ELITE predictions indicate that a path in peeling-ballooning stability opens up for certain conditions of density, power, q 95 and shaping, allowing the edge pressure to continue increasing without encountering a limit. In the core, calculated anomalous fast-ion diffusion coefficients are consistent with density fluctuation measurements in the toroidicity-induced Alfvén eigenmode range, showing that smaller fast-ion losses contribute to the enhanced confinement at high density. The edge integration study shows that divertor heat loads can be reduced with Ne and Ar injection, but this eventually triggers a cascade of n = 1, 2, 3 core TMs. We can now show that impurity radiation in the core is small and it is not the cause for the drop in confinement at high Ar and Ne injection rates. The overlap between the core TMs is consistent with the loss of pressure as estimated by the Belt model for the coupled rational surfaces. Optimization of these trade-offs has achieved plasmas with sustained H 98y2 = 1.7, f GW = 0.7 and ∼85% mantle radiation. The scenario and its variations at higher density and on- vs off-axis EC heating has been studied as a candidate for an integrated solution for several reactor designs, such as ITER, ARC, and the ARIES-ACT1 case, showing promising results in terms of fusion power and gain.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Resonant inelastic X-ray scattering using a miniature dispersive Rowland refocusing spectrometer

X-ray absorption spectroscopy (XAS) beamlines worldwide are steadily increasing their emphasis on full photon-in/photon-out spectroscopies, such as resonant inelastic X-ray scattering (RIXS), resonant X-ray emission spectroscopy (RXES) and high energy resolution fluorescence detection XAS (HERFD-XAS). In such cases, each beamline must match the choice of emission spectrometer to the scientific mission of its users. Previous work has recently reported a miniature tender X-ray spectrometer using a dispersive Rowland refocusing (DRR) geometry that functions with high energy resolution even with a large X-ray spot size on the sample. This instrument has been used in the laboratory in multiple studies of non-resonant X-ray emission spectroscopy using a conventional X-ray tube, though only for preliminary measurements at a low-intensity microfocus synchrotron beamline. This paper reports an extensive study of the performance of a miniature DRR spectrometer at an unfocused wiggler beamline, where the incident monochromatic flux allows for resonant studies which are impossible in the laboratory. Here, the results support the broader use of the present design and also suggest that the DRR method with an unfocused beam could have important applications for materials with low radiation damage thresholds and that would not survive analysis on focused beamlines.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

GeSn alloys with ∼21% Sn grown by effusion cell molecular beam epitaxy

We report the epitaxial growth of high quality GeSn alloys with Sn compositions up to 21.25 ± 1% by effusion-cell molecular beam epitaxy (MBE). Achieving such a high Sn content with effusion cells is particularly significant, since these sources typically impose stronger radiative heating on the substrate, which is a factor long considered a major obstacle to high-Sn GeSn epitaxy. Contrary to the prevailing assumption that high growth rates are good for suppressing Sn segregation, we demonstrate that carefully controlled low fluxes, combined with stable ultra-low substrate temperatures, enable significant Sn incorporation even under effusion-cell conditions. Structural analyses by high-resolution x-ray diffraction, reciprocal space mapping, atomic force microscopy, and transmission electron microscopy confirm sharp interfaces, high crystallinity, and smooth surfaces at high Sn contents. Furthermore, these findings establish the feasibility of MBE-grown high-Sn GeSn even under diffusion cells, thereby broadening opportunities for Si-compatible photonic and quantum devices.

Alloys↗
DOE OSTI2022

Exploration of Defect Dynamics and Color Center Qubit Synthesis with Pulsed Ion Beams

Short-pulse ion beams have been developed in recent years and now enable applications in materials science. A tunable flux of selected ions delivered in pulses of a few nanoseconds can affect the balance of defect formation and dynamic annealing in materials. We report results from color center formation in silicon with pulses of 900 keV protons. G-centers in silicon are near-infrared photon emitters with emerging applications as single-photon sources and for spin-photon qubit integration. G-centers consist of a pair of substitutional carbon atoms and one silicon interstitial atom and are often formed by carbon ion implantation and thermal annealing. Here, we report on G-center formation with proton pulses in silicon samples that already contained carbon, without carbon ion implantation or thermal annealing. The number of G-centers formed per proton increased when we increased the pulse intensity from 6.9 × 10 9 to 7.9 × 10 10 protons/cm 2 /pulse, demonstrating a flux effect on G-center formation efficiency. We observe a G-center ensemble linewidth of 0.1 nm (full width half maximum), narrower than previously reported. Pulsed ion beams can extend the parameter range available for fundamental studies of radiation-induced defects and the formation of color centers for spin-photon qubit applications.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Radiation Effects Related to Repaired BWR Core Shrouds

The material properties of the core shroud and supporting tie rod components are important factors for Boiling Water Reactor (BWR) life extension considerations. Given the variability of nickel and boron content found in 304 stainless steel shroud plates, and XM-19 and Inconel X-750 tie rod materials, this paper combines the latest spectral information in the vicinity of the core shroud to calculate hydrogen and helium gas production limits as well as atomic displacement damage spanning 80 full-power years (FPY) using the SPECTER code. Results indicate that, whereas boron has little effect on the atomic displacement damage, helium production from boron can be important and must be included in weldability assessments. Since the boron concentration is uncertain, helium generation is calculated assuming a composition range based on specifications and reported measurements. The results show that helium production caused by transmutations in the 304 SS shroud material are dominated by the concentration of boron and will have a significant impact on weldability after only a few years of service. For tie rods, the susceptibility to irradiation-assisted stress corrosion cracking (IASCC) has been assessed by determining helium production in Inconel X-750 IASCC specimens irradiated in the Advanced Test Reactor (ATR) reactor and correlating with the helium produced in a BWR. As a tie rod material in a high thermal neutron flux environment, Inconel X-750 is more likely to be IASCC sensitive during service in a BWR due to helium than the XM-19 stainless steel alloy because of a greater nickel content and boron concentration. Weldability of the core shroud plate material, IASCC of the tie rod materials, and the gamma photon contribution to radiation damage are discussed.

radiation damage in materials, BWR↗
DOE OSTI2025

NuSTAR Bounds on Radiatively Decaying Particles from M82

Axions and other putative feebly interacting particles with a mass of tens to several hundreds of keVs can be produced in stellar cores with a Lorentz boost factor E a / m a ≲ 10 . Thus, starburst galaxies such as M82 are efficient factories of slow axions. Their decay a → γ γ would produce a large flux of x-ray photons, peaking around 100 keV and spread around the Galaxy by an angle that can be relatively large. We use observations of the Nuclear Spectroscopic Telescope Array mission to show that the absence of these features can constrain 30–500 keV axion masses into uncharted regions for axion-photon coupling of g a γ ∼ 10 − 10 – 10 − 12 GeV − 1 . Our argument can be applied to other heavy feebly interacting particles and astrophysical sources that are hot enough to produce them, yet cold enough to avoid large boost factors which slow down the decay. Published by the American Physical Society 2025

Candón, Francisco R. (ORCID:0009000231999278)↗
DOE OSTI2020

High-dynamic-range transmission-mode detection of synchrotron radiation using X-ray excited optical luminescence in diamond

Enhancement of X-ray excited optical luminescence in a 100 µm-thick diamond plate by introduction of defect states via electron beam irradiation and subsequent high-temperature annealing is demonstrated. The resulting X-ray transmission-mode scintillator features a linear response to incident photon flux in the range 7.6 × 10 8 to 1.26 × 10 12 photons s -1 mm -2 for hard X-rays (15.9 keV) using exposure times from 0.01 to 5 s. These characteristics enable a real-time transmission-mode imaging of X-ray photon flux density without disruption of X-ray instrument operation.

Instruments & Instrumentation↗
DOE OSTI2025

Thermal Analysis of a Solid Particle Light-Trapping Planar Cavity Receiver Using Computational Fluid Dynamics

Concentrated solar power (CSP) is one of the most effective ways of harnessing solar power to create efficient, durable, and resilient energy systems. This study entails thermal modeling and analysis of a novel central tower receiver configuration. This receiver uses solid particles as the heat transfer fluid (HTF), a promising option for third-generation CSP systems. The configuration considered here is the light-trapping planar cavity receiver (LTPCR) introduced by the National Renewable Energy Laboratory. While heat transfer studies of various LTPCR subsystems have been done, system-level thermal analysis of the LTPCR receiver has not been attempted. This study also presents important sensitivity analyses of the operating parameters of the CSP system, which can help guide the design of future central tower receivers. This study employs Ansys Fluent as a computational fluid dynamics (CFD) tool to model fluid dynamics and heat transfer in the receiver, intending to quantify its thermal performance. The model seamlessly integrates Monte Carlo ray tracing data, which generates absorbed solar flux profiles from the heliostat field design, with the heat transfer characteristics of the fluidized particle bed. This unified model is designed to accurately predict the thermal behavior of the LTPCR. Analysis of preliminary results reveals that the primary loss mechanisms are radiative and natural convective losses, in that order. Based on observations from a baseline case, several strategies are suggested and numerically tested. These solutions include selective cooling of high-temperature regions and manipulation of particle bed parameters. Selective cooling of high-temperature regions reduced the peak temperature by 151 degrees C and decreased thermal losses by 0.9%. Improving the particle-wall heat transfer coefficient (P-W HTC) of the particle bed decreased the thermal losses by 1.7% and decreased the peak temperatures by 57 degrees C. Decreasing the particle inlet temperature (PIT) also reduced thermal losses by 3.5% and decreased peak temperatures by 29 degrees C. Compounding these strategies improved the thermal losses of the receiver from 13.5% in the baseline case to 7.5%. Additionally, the study explores the variation in thermal performance across different locations of the receiver, where a variation of thermal losses from 12.9% to 17.3% is found. This allows a comprehensive evaluation of potential improvements in efficiency and temperature management.

computational fluid dynamics↗
DOE OSTI2022

A phase-field model for void and gas bubble superlattice formation in irradiated solids

A phase-field model to simulate the formation of both void and gas bubble superlattices is derived from a grand potential functional, assuming 1D diffusion of self-interstitial atoms. The model is capable of accounting for superlattice formation by either a nucleation and growth or spinodal decomposition mechanism; in this work, we focus on the nucleation and growth mechanism, using a discrete nucleation approach in the phase-field model. In simulations of void formation, short aligned rows of voids were initially formed, followed by growth in the size of the aligned rows, and finally leading to superlattice formation, consistent with experimental observations. Void superlattice spacing as a function of model parameters was quantified. Increased nucleation rates led to smaller superlattice spacing, while increased vacancy diffusivity led to larger superlattice spacing. In simulations of gas bubble superlattice formation, superlattice spacing decreased with increasing gas atom flux, consistent with experimental observations. Here, simulations with increasing ratio of gas atom flux to vacancy-interstitial pair production led to increased superlattice spacing, which is inconsistent with experimental observations at high gas atom flux rates; this discrepancy is attributed to the fact that the model does not account for bound gas atom-vacancy pairs that may dominate at high gas flux rates.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Observations for Model Intercomparison Project (Obs4MIPs): status for CMIP6

The Observations for Model Intercomparison Project (Obs4MIPs) was initiated in 2010 to facilitate the use of observations in climate model evaluation and research, with a particular target being the Coupled Model Intercomparison Project (CMIP), a major initiative of the World Climate Research Programme (WCRP). To this end, Obs4MIPs (1) targets observed variables that can be compared to CMIP model variables; (2) utilizes dataset formatting specifications and metadata requirements closely aligned with CMIP model output; (3) provides brief technical documentation for each dataset, designed for nonexperts and tailored towards relevance for model evaluation, including information on uncertainty, dataset merits, and limitations; and (4) disseminates the data through the Earth System Grid Federation (ESGF) platforms, making the observations searchable and accessible via the same portals as the model output. Taken together, these characteristics of the organization and structure of obs4MIPs should entice a more diverse community of researchers to engage in the comparison of model output with observations and to contribute to a more comprehensive evaluation of the climate models. At present, the number of obs4MIPs datasets has grown to about 80; many are undergoing updates, with another 20 or so in preparation, and more than 100 are proposed and under consideration. A partial list of current global satellite-based datasets includes humidity and temperature profiles; a wide range of cloud and aerosol observations; ocean surface wind, temperature, height, and sea ice fraction; surface and top-of-atmosphere longwave and shortwave radiation; and ozone (O 3 ), methane (CH 4 ), and carbon dioxide (CO 2 ) products. A partial list of proposed products expected to be useful in analyzing CMIP6 results includes the following: alternative products for the above quantities, additional products for ocean surface flux and chlorophyll products, a number of vegetation products (e.g., FAPAR, LAI, burned area fraction), ice sheet mass and height, carbon monoxide (CO), and nitrogen dioxide (NO 2 ). While most existing obs4MIPs datasets consist of monthly-mean gridded data over the global domain, products with higher time resolution (e.g., daily) and/or regional products are now receiving more attention. Along with an increasing number of datasets, obs4MIPs has implemented a number of capability upgrades including (1) an updated obs4MIPs data specifications document that provides additional search facets and generally improves congruence with CMIP6 specifications for model datasets, (2) a set of six easily understood indicators that help guide users as to a dataset's maturity and suitability for application, and (3) an option to supply supplemental information about a dataset beyond what can be found in the standard metadata. With the maturation of the obs4MIPs framework, the dataset inclusion process, and the dataset formatting guidelines and resources, the scope of the observations being considered is expected to grow to include gridded in situ datasets as well as datasets with a regional focus, and the ultimate intent is to judiciously expand this scope to any observation dataset that has applicability for evaluation of the types of Earth system models used in CMIP.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Relative Contributions of Surface Parcel and Atmospheric Environment to Convective Potential during Interstorm Periods

Convective instability is affected by both surface heat fluxes into near-surface air parcels and the atmospheric profile encountered as these air parcels are lifted aloft. In this study, we investigate the evolution of buoyancy experienced by surface-based parcels, taking interstorm soil moisture drydowns as fundamental time periods. We use profile observations of atmospheric temperature and humidity from ground-based passive remote sensing and in situ observations available at the U.S. Department of Energy Atmospheric Radiation Measurement Southern Great Plains site in Oklahoma, United States, and examine drydown events during the warm seasons from 2017 to 2022. Results reveal new insights on the emergence and growth of convective available potential energy (CAPE) during drydowns. We observe that the peak convective potential appears in the afternoon and grows in the midtroposphere (68% of 66 drydown events), with the largest CAPE values toward the end of the drydown event. We also find that the near-surface parcel contributes more to the evolution of CAPE than the atmospheric environment (86% of drydown events). These findings highlight the importance of surface heat fluxes and moisture availability from surface-based parcels in modulating the evolution of atmospheric conditions favorable for convection, underscoring the interplay between surface processes and atmospheric dynamics in driving convective instability.

Atmosphere-land interaction↗
DOE OSTI2021

Collaborative Research: Improved Efficiency and Coupling of the Radiation Code in the ACME Earth System Model (Final Report)

The complexity of radiative transfer, its importance to the exchange of energy in the climate system, and its high computational cost establishes importance of an accurate and efficient radiative transfer parameterization for climate simulation. Previous work by the proposing team at AER led to the development of the radiation code, RRTMG, which has been widely accepted by the global modeling community as a fast and accurate advancement over the previous generation of radiation codes. It has been in use in the NCAR CESM for many years, and it has been implemented in the initial version the DOE E3SM model. However, its computational cost remains high relative to other components in part due to its complexity and to its inefficient use of modern optimization strategies, and this project helped address this limitation for the code’s application in E3SM. Under other funding, the Investigators of this project led an effort to develop a high-performance broadband radiation code, called RTE+RRTMGP, which is a completely restructured code that will take advantage of modern computational capabilities to enhance its performance while retaining the strengths and accuracy of the original code. Designed to perform over a range of computer architectures, RTE+RRTMGP makes extensive use of Fortran 2003 features to improve both its efficiency and its use of memory. RTE+RRTMGP is expected to be adopted in the next generation of RTE+RRTMGP. This project allowed for advancements to the code’s computational capabilities and adding new and enhanced features. This included revising RTE+RRTMGP to run on GPU processors, analysis of and improvements to the code’s timing, modifying the gas optics in RRTMGP to increase the code’s accuracy, extensive validation of computed fluxes, heating rates and forcings, generating a cloud optical property and vertical sampling capabilities for RTE+RRTMGP, implementing a fast and accurate longwave scattering capability, and groundwork for the inclusion of a capability to specify solar variability. Many of the accomplishment in this project necessitated significant collaboration with the E3SM development team. The result of this project was optimization of a key physical component (radiative transfer calculations) of E3SM, directly supporting E3SM’s overarching global modeling objectives. More broadly, this project provided overall advancements in the use of radiative transfer calculations in atmospheric modeling and simulation, particularly for climate.

58 GEOSCIENCES↗
DOE OSTI2024

Evaluation of Additively Manufactured Monolithic SiC and SiC-Matrix Ceramic Matrix Composites for Concentrating Solar Receiver Applications - Fabrication and Testing of Receiver Design Feature Specimens in a Simulating Lab Test via Laser Heating

Increasing operating temperatures of solar receivers is paramount to the efficiency of concentrated solar thermal (CST) and solar power (CSP) systems. Owing to its high temperature stability combined with excellent thermal and optical properties, SiC has been the material of choice for application in high-temperature solar receivers. We report the results of our study of the effective heat transfer characteristics of several candidate SiC structure motifs, or feature geometries, which are fabricated via additive manufacturing. The SiC structure motifs studied include different permutations of three-dimensional periodic lattices and defined shapes. A solar-thermal simulating laboratory test setup is constructed using a 4kW CO2 laser system with beam shaping optics to apply concurrent radiative heating power on one face of 2”-diameter cylindrical feature specimens, representing the structure motifs of interest for receiver element design, while flowing through the sample as heat transfer fluid. Using the test setup, simulative test conditions representative of a concentrated solar flux of up to ~2000 suns could be achieved in the lab tests under varying air flow through the test structure. A simple 1D numerical analysis scheme is developed to extract an effective or compound heat transfer coefficient representative of the test structure under steady-state heat flow conditions. The test results and their use to guide the selection and optimization of SiC material and structure motifs for the receiver element design fabrication are discussed.

14 SOLAR ENERGY↗