Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “R MATRIX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Achievement of high coercivity in sintered R-Fe-B magnets based on misch-metal by dual alloy method

The R-Fe-B (R, rare earth) sintered magnets prepared with different ratio of alloys of MM-Fe-B (MM, misch-metal) and Nd-Fe-B by dual alloy method were investigated. As expected, the high ratio of MM-Fe-B alloy degrades the hard magnetic properties heavily with intrinsic coercivity lower than 5 kOe. When the atomic ratio MM/R ≤ 21.5% the magnetic properties can reach a practical level of B{sub r} ≥ 12.1 kGs, H{sub cj} ≥ 10.7 kOe, and (BH){sub max} ≥ 34.0 MGOe. And the effect of H{sub cj} enhancement by the grain boundary diffusion process is obvious when MM/R ≤ 21.5%. It is revealed that the decrement of intrinsic magnetic properties of R{sub 2}Fe{sub 14}B matrix phase is not the main reason of the degradation of the magnets with high MM ratio. The change of deteriorated microstructure together with phase component plays fundamental roles in low H{sub cj}. In high MM ratio magnets, (a) after annealing, Ce atoms inside main phase are inclined to be segregated in the outer layer of the main phase grains; (b) there is no thin layer of Ce-rich phase as an analogue of Nd-rich phase to separate main phase grains; (c) excessive Ce tends to form CeFe{sub 2} grains.

36 MATERIALS SCIENCE↗

Nanostructured crystals of Sr{sub 1-x}R{sub x}F{sub 2+x} fluorite phases and their ordering: 6. Microindentation analysis of crystals

Hardness, crack resistance, brittleness, and effective fracture energy have been studied for crystals of 24 fluorite phases Sr{sub 1-x}R{sub x}F{sub 2+x} (R are 14 rare earth elements (REEs); 0 < x {<=} 0.5) and SrF2 grown by the Bridgman method from a melt. These characteristics change nonlinearly with an increase in the REE content for Sr{sub 1-x}R{sub x}F{sub 2+x} (0 < x {<=} 0.5) with R = La, Nd, Sm, Gd, and Lu; it is maximum in the range x < 0.1 for all REEs. The changes in a number of REEs have been traced for an isoconcentration series of Sr{sub 0.90}R{sub 0.10}F{sub 2.10} crystals (R = La, Nd, Sm, Gd, Ho, Er-Lu, or Y) and crystals (similar in composition) with R = Tb and Dy. The hardness of Sr{sub 1-x}R{sub x}F{sub 2+x} crystals is higher by a factor of {approx}2-3 than that of SrF2. The effect of decrease in microstresses in SrF{sub 2} crystals is confirmed by the isomorphic introduction of R{sup 3+} ions into this crystalline matrix.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Conductance matrix of multiterminal semiconductor devices with edge channels

A method for determining the conductance matrix of multiterminal semiconductor structures with edge channels is proposed. The method is based on the solution of a system of linear algebraic equations based on Kirchhoff equations, made up of potential differences U{sub ij} measured at stabilized currents I{sub kl}, where i, j, k, l are terminal numbers. The matrix obtained by solving the system of equations completely describes the structure under study, reflecting its configuration and homogeneity. This method can find wide application when using the known Landauer-Buttiker formalism to analyze carrier transport in the quantum Hall effect and quantum spin Hall effect modes. Within the proposed method, the contribution of the contact area resistances R{sub c} to the formation of conductance matrix elements is taken into account. The possibilities of practical application of the results obtained in developing analog cryptographic devices are considered.

36 MATERIALS SCIENCE↗

Near-infrared and ultraviolet induced isomerization of crotonic acid in N{sub 2} and Xe cryomatrices: First observation of two high-energy trans C–O conformers and mechanistic insights

E-crotonic acid was isolated in cryogenic solid N{sub 2} and xenon matrices, and subjected to Laser ultraviolet (UV) and near-infrared (NIR) irradiations. In the deposited matrices, the two low-energy cis C–O E-cc and E-ct conformers, which are the only forms significantly populated in the gas phase, were observed. UV irradiation (λ= 250 nm) of the compound in N{sub 2} matrix allows for experimental detection, not just of the two low-energy cis C–O isomers of Z-crotonic acid previously observed in the experiments carried out in argon matrix [Z-cc and Z-ct; R. Fausto, A. Kulbida, and O. Schrems, J. Chem. Soc., Faraday Trans. 91, 3755–3770 (1995)] but also of the never observed before high-energy forms of both E- and Z-crotonic acids bearing the carboxylic acid group in the trans arrangement (E-tc and Z-tc conformers). In turn, NIR irradiation experiments in the N{sub 2} matrix allow to produce the high-energy E-tc trans C–O conformer in a selective way, from the initially deposited E-cc form. The vibrational signatures of all the 6 rotameric structures of the crotonic acids experimentally observed, including those of the new trans C–O forms, were determined and the individual spectra fully assigned, also with support of theoretically obtained data. On the other hand, as found before for the compound isolated in argon matrix, the experiments performed in xenon matrix failed to experimental detection of the trans C–O forms. This demonstrates that in noble gas matrices these forms are not stable long enough to allow for their observation by steady state spectroscopy techniques. In these matrices, the trans C–O forms convert spontaneously into their cis C–O counterparts, by tunnelling. Some mechanistic details of the studied processes were extracted and discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A General Purpose Sparse Matrix Parallel Solvers Package

A general purpose solver package for constructing and solving a range of sparse linear systems arising from discretization of PDEs on unstructured meshes is developed. Once the sparse symmetric complex matrix is constructed, it can be solved by either a preconditioned bi-conjugate gradient solver, a two-stage Cholesky LDLT factorization solver, or a hybrid solver combining the above two methods. (More detailed than 95-0127).

solver sparse matrix solvers package PDE↗

Wiener-Hopf factorization of piecewise meromorphic matrix-valued functions

Let D{sup +} be a multiply connected domain bounded by a contour {gamma}, let D{sup -} be the complement of D{sup +} union {gamma} in C-bar=C union {l_brace}{infinity}{r_brace}, and a(t) be a continuous invertible matrix-valued function on {gamma} which can be meromorphically extended into the open disconnected set D{sup -} (as a piecewise meromorphic matrix-valued function). An explicit solution of the Wiener-Hopf factorization problem for a(t) is obtained and the partial factorization indices of a(t) are calculated. Here an explicit solution of a factorization problem is meant in the sense of reducing it to the investigation of finitely many systems of linear algebraic equations with matrices expressed in closed form, that is, in quadratures. Bibliography: 15 titles.

97 MATHEMATICS AND COMPUTING↗

Implementation of thermal residual stresses in the analysis of fiber bridged matrix crack growth in titanium matrix composites

In this research, thermal residual stresses were incorporated in an analysis of fiber-bridged matrix cracks in unidirectional and cross-ply titanium matrix composites (TMC) containing center holes or center notches. Two TMC were investigated, namely, SCS-6/Timelal-21S laminates. Experimentally, matrix crack initiation and growth were monitored during tension-tension fatigue tests conducted at room temperature and at an elevated temperature of 200 C. Analytically, thermal residual stresses were included in a fiber bridging (FB) model. The local R-ratio and stress-intensity factor in the matrix due to thermal and mechanical loadings were calculated and used to evaluate the matrix crack growth behavior in the two materials studied. The frictional shear stress term, tau, assumed in this model was used as a curve-fitting parameter to matrix crack growth data. The scatter band in the values of tau used to fit the matrix crack growth data was significantly reduced when thermal residual stresses were included in the fiber bridging analysis. For a given material system, lay-up and temperature, a single value of tau was sufficient to analyze the crack growth data. It was revealed in this study that thermal residual stresses are an important factor overlooked in the original FB models.

Bakuckas, John G., Jr.↗

A stochastic diffusion process for Lochner's generalized Dirichlet distribution

The method of potential solutions of Fokker-Planck equations is used to develop a transport equation for the joint probability of N stochastic variables with Lochner’s generalized Dirichlet distribution as its asymptotic solution. Individual samples of a discrete ensemble, obtained from the system of stochastic differential equations, equivalent to the Fokker-Planck equation developed here, satisfy a unit-sum constraint at all times and ensure a bounded sample space, similarly to the process developed in for the Dirichlet distribution. Consequently, the generalized Dirichlet diffusion process may be used to represent realizations of a fluctuating ensemble of N variables subject to a conservation principle. Compared to the Dirichlet distribution and process, the additional parameters of the generalized Dirichlet distribution allow a more general class of physical processes to be modeled with a more general covariance matrix.

97 MATHEMATICS AND COMPUTING↗

Distribution of species and Ga–N bonds in silicon co-implanted with gallium and nitrogen ions

The concentration profiles of species in silicon subjected to gallium and nitrogen co-implantation and subsequent annealing have been investigated by the method of X-ray photoelectron spectroscopy combined with the layer-by-layer ion etching of the implanted layer. It is shown that practically entire implanted gallium undergoes out-diffusion, but the preliminary implantation of nitrogen for the synthesis of a barrier SiN{sub x} layer makes it possible to avoid the essential loss of gallium. In this case, about 14 % of implanted gallium bond to nitrogen. The obtained data are discussed from the viewpoint of the possibility of ion synthesis of GaN inclusions in silicon matrix.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ion-irradiation-induced amorphization of cobalt nanoparticles

The amorphization of Co nanoparticles embedded in SiO{sub 2} has been investigated by measuring their structure and size, before and after ion irradiation, by x-ray absorption spectroscopy and small-angle x-ray scattering, respectively. Compared to bulk material, unirradiated crystalline nanoparticles exhibited increased structural disorder and a decreased average coordination number as a result of finite-size effects. Upon irradiation, there was no variation in nanoparticle size yet significant structural change. The coordination number decreased further while the mean value (bondlength), variance (Debye-Waller factor), and asymmetry (third cumulant) of the interatomic distance distribution all increased, as consistent with theoretical predictions for an amorphous elemental metal. Furthermore, the interatomic distance distribution for irradiated Co nanoparticles was in excellent agreement with our molecular dynamics simulations for bulk amorphous Co, and we have thus attributed the observed structural changes to the formation of an amorphous phase. Though such a crystalline-to-amorphous phase transformation is not readily achievable in bulk material by ion irradiation, we suggest that the perturbed structural state prior to irradiation and the amorphous surrounding matrix both contribute to nucleating and stabilizing the amorphous phase in irradiated Co nanoparticles. In addition to the structural properties, the vibrational properties of the amorphous phase were also probed, using temperature-dependent x-ray absorption spectroscopy measurements. The Einstein temperature of the unirradiated crystalline nanoparticles was lower than that of bulk material due to loosely bonded surface/interfacial atoms. In contrast, that of the irradiated amorphous nanoparticles was substantially higher than the bulk value. We attribute this apparent bond stiffening to the influence of the rigid surrounding matrix.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Uncertainty quantification of an empirical shell-model interaction using principal component analysis

Recent investigations have emphasized the importance of uncertainty quantification (UQ) in nuclear theory. Here, we carry out UQ for configuration-interaction shell-model calculations in the 1$\textit{s}$–0$\textit{d}$ valence space, investigating the sensitivity of observables to perturbations in the 66 parameters (matrix elements) of a high-quality empirical interaction. The large parameter space makes computing the corresponding Hessian numerically costly, so we compare a cost-effective approximation, using the Feynman-Hellmann theorem, to the full Hessian and find it works well. Diagonalizing the Hessian yields the principal components of the interaction: linear combinations of parameters ordered by sensitivity. This approximately decoupled distribution of parameters facilitates theoretical uncertainty propagation onto structure observables: electromagnetic transitions, Gamow-Teller decays, and dark matter-nucleus scattering matrix elements.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗