SEARCH · Engineering Papers

Results for “Programming Practices”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

All sources NASA NTRS DOE OSTI

NASA NTRS2002

LEO Spacecraft Charging Guidelines

Over the past decade, Low Earth Orbiting (LEO) spacecraft have gradually required ever-increasing power levels. As a rule, this has been accomplished through the use of high voltage systems. Recent failures and anomalies on such spacecraft have been traced to various design practices and materials choices related to the high voltage solar arrays. NASA Glenn has studied these anomalies including plasma chamber testing on arrays similar to those that experienced difficulties on orbit. Many others in the community have been involved in a comprehensive effort to understand the problems and to develop practices to avoid them. The NASA Space Environments and Effects program, recognizing the timeliness of this effort, has commissioned and funded a design guidelines document intended to capture the current state of understanding. We present here an overview of this document, which is now nearing completion.

Hillard, G. B.↗

NASA NTRS2004

Leo Spacecraft Charging Design Guidelines: A Proposed NASA Standard

Over the past decade, Low Earth Orbiting (LEO) spacecraft have gradually required ever-increasing power levels. As a rule, this has been accomplished through the use of high voltage systems. Recent failures and anomalies on such spacecraft have been traced to various design practices and materials choices related to the high voltage solar arrays. NASA Glenn has studied these anomalies including plasma chamber testing on arrays similar to those that experienced difficulties on orbit. Many others in the community have been involved in a comprehensive effort to understand the problems and to develop practices to avoid them. The NASA Space Environments and Effects program, recognizing the timeliness of this effort, commissioned and funded a design guidelines document intended to capture the current state of understanding. This document, which was completed in the spring of 2003, has been submitted as a proposed NASA standard. We present here an overview of this document and discuss the effort to develop it as a NASA standard.

Hillard, G. B.↗

NASA NTRS2005

Shuttle-Derived Launch Vehicles' Capablities: An Overview

Shuttle-Derived Launch Vehicle (SDLV) concepts have been developed by a collaborative team comprising the Johnson Space Center, Marshall Space Flight Center, Kennedy Space Center, ATK-Thiokol, Lockheed Martin Space Systems Company, The Boeing Company, and United Space Alliance. The purpose of this study was to provide timely information on a full spectrum of low-risk, cost-effective options for STS-Derived Launch Vehicle concepts to support the definition of crew and cargo launch requirements for the Space Exploration Vision. Since the SDLV options use high-reliability hardware, existing facilities, and proven processes, they can provide relatively low-risk capabilities to launch extremely large payloads to low Earth orbit. This capability to reliably lift very large, high-dollar-value payloads could reduce mission operational risks by minimizing the number of complex on-orbit operations compared to architectures based on multiple smaller launchers. The SDLV options also offer several logical spiral development paths for larger exploration payloads. All of these development paths make practical and cost-effective use of existing Space Shuttle Program (SSP) hardware, infrastructure, and launch and flight operations systems. By utilizing these existing assets, the SDLV project could support the safe and orderly transition of the current SSP through the planned end of life in 2010. The SDLV concept definition work during 2004 focused on three main configuration alternatives: a side-mount heavy lifter (approximately 77 MT payload), an in-line medium lifter (approximately 22 MT Crew Exploration Vehicle payload), and an in-line heavy lifter (greater than 100 MT payload). This paper provides an overview of the configuration, performance capabilities, reliability estimates, concept of operations, and development plans for each of the various SDLV alternatives. While development, production, and operations costs have been estimated for each of the SDLV configuration alternatives, these proprietary data have not been included in this paper.

Rothschild, William J.↗

NASA NTRS2006

Acoustic Characteristics of Various Treatment Panel Designs Specific to HSCT Mixer-Ejector Application

The development process of liner design methodology is described in several reports. The results of the initial effort of concept development, screening, laboratory testing of various liner concepts, and preliminary correlation (generic data) are presented in a report Acoustic Characteristics of Various Treatment Panel Designs for HSCT Ejector Liner Acoustic Technology Development Program. The second phase of laboratory test results of more practical concepts and their data correlations are presented in this report (product specific). In particular, this report contains normal incidence impedance measurements of several liner types in both a static rig and in a high temperature flow duct rig. The flow duct rig allows for temperatures up to 400 F with a grazing flow up to Mach 0.8. Measurements of impedance, DC flow resistance, and in the flow rig cases, impact of the liner on boundary layer profiles are documented. In addition to liner rig tests, a limited number of tests were made on liners installed in a mixer-Ejector nozzle to confirm the performance of the liner prediction in an installed configuration.

Salikuddin, M.↗

NASA NTRS2007

Microfluidic System Simulation Including the Electro-Viscous Effect

This paper describes a practical approach using a general purpose lumped-parameter computer program, GFSSP (Generalized Fluid System Simulation Program) for calculating flow distribution in a network of micro-channels including electro-viscous effects due to the existence of electrical double layer (EDL). In this study, an empirical formulation for calculating an effective viscosity of ionic solutions based on dimensional analysis is described to account for surface charge and bulk fluid conductivity, which give rise to electro-viscous effect in microfluidics network. Two dimensional slit micro flow data was used to determine the model coefficients. Geometry effect is then included through a Poiseuille number correlation in GFSSP. The bi-power model was used to calculate flow distribution of isotropically etched straight channel and T-junction microflows involving ionic solutions. Performance of the proposed model is assessed against experimental test data.

Rojas, Eileen↗

NASA NTRS2009

Effects of Automation Types on Air Traffic Controller Situation Awareness and Performance

The Joint Planning and Development Office has proposed the introduction of automated systems to help air traffic controllers handle the increasing volume of air traffic in the next two decades (JPDO, 2007). Because fully automated systems leave operators out of the decision-making loop (e.g., Billings, 1991), it is important to determine the right level and type of automation that will keep air traffic controllers in the loop. This study examined the differences in the situation awareness (SA) and collision detection performance of individuals when they worked with information acquisition, information analysis, decision and action selection and action implementation automation to control air traffic (Parasuraman, Sheridan, & Wickens, 2000). When the automation was unreliable, the time taken to detect an upcoming collision was significantly longer for all the automation types compared with the information acquisition automation. This poor performance following automation failure was mediated by SA, with lower SA yielding poor performance. Thus, the costs associated with automation failure are greater when automation is applied to higher order stages of information processing. Results have practical implications for automation design and development of SA training programs.

Sethumadhavan, A.↗

NASA NTRS2011

Spaceborne Sensors Track Marine Debris Circulation in the Gulf of Mexico

Marine debris is a problem for coastal areas throughout the world, including the Gulf of Mexico. To aid the NOAA Marine Debris Program in monitoring marine debris dispersal and regulating marine debris practices, sea surface height and height anomaly data provided by the Colorado Center for Astrodynamics Research at the University of Colorado, Boulder, were utilized to help assess trash and other discarded items that routinely wash ashore in southeastern Texas, at Padre Island National Seashore. These data were generated from the NASA radar altimeter satellites TOPEX/Poseidon, Jason 1, and Jason 2, as well as the European altimeter satellites ERS-1, ERS-2 (European Remote Sensing Satellite), and ENVISAT (Environmental Satellite). Sea surface temperature data from MODIS were used to study of the dynamics of the Loop Current. Sea surface height and MODIS data analysis were used to show that warm water in the core of eddies, which periodically separate from the Loop Current, can be as high as 30 cm above the surrounding water. These eddies are known to directly transfer marine debris to the western continental shelf and the elevated area of water can be tracked using satellite radar altimeter data. Additionally, using sea surface height, geostrophic velocity, and particle path data, foretracking and backtracking simulations were created. These simulation runs demonstrated that marine debris on Padre Island National Seashore may arise from a variety of sources, such as commercial fishing/shrimping, the oil and gas industry, recreational boaters, and from rivers that empty into the Gulf of Mexico.

Reahard, Ross↗

NASA NTRS2013

Collaborative Platforms Aid Emergency Decision Making

Terra. Aqua. Cloudsat. Landsat. NASA runs and partners in many missions dedicated to monitoring the Earth, and the tools used in these missions continuously return data on everything from shifts in temperature to cloud formation to pollution levels over highways. The data are of great scientific value, but they also provide information that can play a critical role in decision making during times of crisis. Real-time developments in weather, wind, ocean currents, and numerous other conditions can have a significant impact on the way disasters, both natural and human-caused, unfold. "NASA has long recognized the need to make its data from real-time sources compatible and accessible for the purposes of decision making," says Michael Goodman, who was Disasters Program manager at NASA Headquarters from 2009-2012. "There are practical applications of NASA Earth science data, and we d like to accelerate the use of those applications." One of the main obstacles standing in the way of eminently practical data is the fact that the data from different missions are collected, formatted, and stored in different ways. Combining data sets in a way that makes them useful for decision makers has proven to be a difficult task. And while the need for a collaborative platform is widely recognized, very few have successfully made it work. Dave Jones, founder and CEO of StormCenter Communications Inc., which consults with decision makers to prepare for emergencies, says that "when I talk to public authorities, they say, If I had a nickel for every time someone told me they had a common operating platform, I d be rich. But one thing we ve seen over the years is that no one has been able to give end users the ability to ingest NASA data sets and merge them with their own."

Source record↗

NASA NTRS2016

Perceived Noise Analysis for Offset Jets Applied to Commercial Supersonic Aircraft

A systems analysis was performed with experimental jet noise data, engine/aircraft performance codes and aircraft noise prediction codes to assess takeoff noise levels and mission range for conceptual supersonic commercial aircraft. A parametric study was done to identify viable engine cycles that meet NASAs N+2 goals for noise and performance. Model scale data from offset jets was used as input to the aircraft noise prediction code to determine the expected sound levels for the lateral certification point where jet noise dominates over all other noise sources. The noise predictions were used to determine the optimal orientation of the offset nozzles to minimize the noise at the lateral microphone location. An alternative takeoff procedure called programmed lapse rate was evaluated for noise reduction benefits. Results show there are two types of engines that provide acceptable range performance; one is a standard mixed-flow turbofan with a single-stage fan, and the other is a three-stream variable-cycle engine with a multi-stage fan. The engine with a single-stage fan has a lower specific thrust and is 8 to 10 EPNdB quieter for takeoff. Offset nozzles reduce the noise directed toward the thicker side of the outer flow stream, but have less benefit as the core nozzle pressure ratio is reduced and the bypass-to-core area ratio increases. At the systems level for a three-engine N+2 aircraft with full throttle takeoff, there is a 1.4 EPNdB margin to Chapter 3 noise regulations predicted for the lateral certification point (assuming jet noise dominates). With a 10 reduction in thrust just after takeoff rotation, the margin increases to 5.5 EPNdB. Margins to Chapter 4 and Chapter 14 levels will depend on the cumulative split between the three certification points, but it appears that low specific thrust engines with a 10 reduction in thrust (programmed lapse rate) can come close to meeting Chapter 14 noise levels. Further noise reduction is possible with additional reduction in takeoff thrust using programmed lapse rate, but studies are needed to investigate the practical limits for safety and takeoff regulations.

Turbofans↗

NASA NTRS2019

Perceived Noise Analysis for Offset Jets Applied to Commercial Supersonic Aircraft

A systems analysis was performed with experimental jet noise data, engineaircraft performance codes and aircraft noise prediction codes to assess takeoff noise levels and mission range for conceptual supersonic commercial aircraft. A parametric study was done to identify viable engine cycles that meet NASAs N+2 goals for noise and performance. Model scale data from offset jets was used as input to the aircraft noise prediction code to determine the expected sound levels for the lateral certification point where jet noise dominates over all other noise sources. The noise predictions were used to determine the optimal orientation of the offset nozzles to minimize the noise at the lateral microphone location. An alternative takeoff procedure called programmed lapse rate was evaluated for noise reduction benefits. Results show there are two types of engines that provide acceptable range performance; one is a standard mixed-flow turbofan with a single-stage fan, and the other is a three-stream variable-cycle engine with a multi-stage fan. The engine with a single-stage fan has a lower specific thrust and is 8 to 10 EPNdB quieter for takeoff. Offset nozzles reduce the noise directed toward the thicker side of the outer flow stream, but have less benefit as the core nozzle pressure ratio is reduced and the bypass-to-core area ratio increases. At the systems level for a three-engine N+2 aircraft with full throttle takeoff, there is a 1.4 EPNdB margin to Chapter 3 noise regulations predicted for the lateral certification point (assuming jet noise dominates). With a 10 reduction in thrust just after takeoff rotation, the margin increases to 5.5 EPNdB. Margins to Chapter 4 and Chapter 14 levels will depend on the cumulative split between the three certification points, but it appears that low specific thrust engines with a 10 reduction in thrust (programmed lapse rate) can come close to meeting Chapter 14 noise levels. Further noise reduction is possible with additional reduction in takeoff thrust using programmed lapse rate, but studies are needed to investigate the practical limits for safety and takeoff regulations.

Jet Noise↗

NASA NTRSDate not supplied

Behavioral Components Of NASA’s 2021 Astronaut Selection Cycle

To successfully implement the behavioral aspects required to select and screen for long-duration missions on the International Space Station and for Artemis Program lunar missions, a multi-phase process combining best practice elements from the fields of industrial-organizational psychology, operational psychology, aerospace psychology and aerospace psychiatry, are needed. Furthermore, this process should preferably be implemented by professionals with extensive experience in human spaceflight operations.

Gary Edward Beven↗

NASA NTRSDate not supplied

The SSRI Knowledge Base Tool: Current Tool Functionality Review and Planned Future Enhancements

NASA’s Small Satellite Reliability Initiative (SSRI), in conjunction with NASA’s Small Spacecraft Systems Virtual Institute (S3VI), has developed the SSRI Knowledge Base to improve mission confidence for small spacecraft. The SSRI Knowledge Base provides vetted, high-quality sources of information on elements that are key to successful small spacecraft missions. These resources include SSRI working group generated documents and presentations in addition to existing guides, publications, standards, software tools, websites, and books. The Knowledge Base is fully searchable, offers downloadable content when possible, and otherwise links to or references content directly from within the tool. All 58 of the planned topic pages that comprise the SSRI Knowledge Base have been recently completed and include over 450 unique resources that are now available for review. Over the past several months significant enhancements to the tool’s capabilities have been developed and implemented. These enhancements consist of the completed baseline content; development of an Application Programming Interface (API); improved user interfaces; scalable and searchable Best Practices and Lessons Learned (BPLL) lists with ratings; and custom website analytics. The SSRI Knowledge Base is a comprehensive and searchable online tool that consolidates and organizes resources, best practices, and lessons learned from previous small spacecraft missions sponsored by NASA, other government agencies, and academia. This free, publicly available tool is available to the entire SmallSat community at: NASA SSRI Knowledge Base | Explore. This presentation will discuss the motivation for and development of the SSRI Knowledge Base, demonstrate the existing tool, share how the smallsat community can get involved and outline plans for further enhancement development. The SSRI is a collaborative activity with broad participation from civil, Department of Defense, and both national and international commercial space systems providers and stakeholders. The S3VI is jointly sponsored by NASA’s Space Technology Mission Directorate and Science Mission Directorate.

Small Spacecraft↗

NASA NTRSDate not supplied

The SSRI Knowledge Base Tool: Current Tool Functionality Review and Planned Future Enhancements

Small Spacecraft↗

DOE OSTI2017

CONTROLLING ENERGY STORAGE SYSTEMS: LESSONS LEARNED FROM THE WASHINGTON CLEAN ENERGY FUND DEMONSTRATION PROJECTS

Washington Clean Energy Fund energy storage demonstration projects created opportunities for learning many aspects of Energy Storage Systems (ESS) including its control for economic operation. PNNL, as the lead for use case analytics program for the demonstration projects, had the opportunity to experience practical aspects of ESS control in terms of control strategy development, control systems deployment, and performance of ESS during actual operation. This paper presents some of those learning opportunities availed to date and a few key lessons with an intention to benefit the wider energy storage community.

Washington CEF, ESS control strategy, control syst↗

DOE OSTI2017

Utilizing the SACADA system to collect simulator training data to inform human reliability analyses - 169

Lack of appropriate human performance data for the development of human reliability analysis (HRA) methods has been identified as a key issue contributing to the method-to-method variability among the HRA methods. The United States Nuclear Regulatory Commission (NRC) worked with domain experts to develop the Scenario Authoring, Characterization, and Debriefing Application (SACADA) system to collect nuclear power plants' licensed operator simulator training and examination data to inform HRA. In the past two decades, significant improvements in understanding and modelling human performance in HRA have affected the perspectives of the types of data to be collected for HRA. A significant change is that human performance is strongly dependent on the context of the tasks to be performed. To incorporate this understanding, the SACADA data taxonomy collects the context and actual performance information of the training objective elements (TOEs) in nuclear plant operator simulator training. This provides a framework consistent with HRA to use context to estimate human error probabilities. It is recognized that measuring crew performance is equally important as improving operator training. SACADA is designed to support the nuclear trainers in capturing this important information that is used to identify training weaknesses and drive continuous improvement. This paper discusses the SACADA taxonomy, the SACADA system's functions, and the supporting software design to enable the SACADA system to be practically implemented in the nuclear power plants' operator simulator training program to collect data for tracking operator performance and HRA analysis. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2019

Extracting SIMD Parallelism from Recursive Task-Parallel Programs

The pursuit of computational efficiency has led to the proliferation of throughput-oriented hardware, from GPUs to increasingly wide vector units on commodity processors and accelerators. This hardware is designed to efficiently execute data-parallel computations in a vectorized manner. However, many algorithms are more naturally expressed as divide-and-conquer, recursive, task-parallel computations. In the absence of data parallelism, it seems that such algorithms are not well suited to throughput-oriented architectures. This paper presents a set of novel code transformations that expose the data parallelism latent in recursive, task- parallel programs. These transformations facilitate straightforward vectorization of task-parallel programs on commodity hardware. We also present scheduling policies that maintain high utilization of vector resources while limiting space usage. Across several task-parallel benchmarks, we demonstrate both efficient vector resource utilization and substantial speedup on chips using Intel’s SSE4.2 vector units, as well as accelerators using Intel’s AVX512 units. We then show through rigorous sampling that, in practice, our vectorization techniques are effective for a much larger class of programs.

Recursive Programs, task parallelism, vectorizatio↗

NASA NTRS1974

Survey of aircraft subcritical flight flutter testing methods

The results of a survey of U. S., British and French subcritical aircraft flight flutter testing methods are presented and evaluation of the applicability of these methods to the testing of the space shuttle are discussed. Ten U. S. aircraft programs covering the large civil transport aircraft and a variety of military aircraft are reviewed. In addition, three major French and British programs are covered by the survey. The significant differences between the U. S., French and British practices in the areas of methods of excitation, data acquisition, transmission and analysis are reviewed. The effect of integrating the digital computer into the flight flutter test program is discussed. Significant saving in analysis and flight test time are shown to result from the use of special digital computer routines and digital filters.

Rosenbaum, R.↗

NASA NTRS2011

NASA's Human Rating Requirements - A Historical Interpretive Perspective

Section 3.0 of NASA's Human Rating Requirements for Space Systems, NPR 8705.2, represents technical engineering requirements that the Agenc y requires of Human Space Systems. In many cases the requirements are not unlike requirements for any space system, crewed or uncrewed, th ey deal with successfully accomplishing the mission objectives. Howev er, they go one step further and have requirements that go beyond suc cessful completion of the mission and dictate functions or actions ne cessary to assure the survival of the crew. In that regard they are u nique from other space system requirements. Even with their uniquenes s the technical requirements of the NPR 8705.2 have been relatively u nchanged in overall intent over the revisions. They all have provided for system redundancy, crew habitable environment, crew situational awareness, crew operation, system control, emergency egress and abort systems. In a few cases the intent of the requirement was changed in tentionally, either to restrict certain types of systems or their fun ctions, or to encompass lessons learned from previous programs. For t he most part the requirements are non controversial and represent the current best practices for human space systems, however, a few requi rements are always debated and have evolved over revisions of the NPR due to studies conducted with various programs like the Orbital Spac e Plane and the Constellation Programs. Those requirements will be di scussed using results of trade studies conducted during past programs highlighting how these particular requirements have evolved through the revisions of the NPR. Comments will also be provided for requirem ents that although not debated, have provided challenges in interpret ation.

Langford, Gerald↗