Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Process sensitivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Easy_PERT: a Python tool for writing PERT cards and parsing PERT card results [Slides]

This presentation begins by providing an overview of the PERT card. The PERT card uses differential operator method to compute first- and second-order tally variations due to density, composition, and reaction cross-sections. It is possible to have multiple PERT cards in one MCNP input deck to study tally variations for several sets of nuclides, reactions, and energy ranges. Furthermore, the METHOD option tells MCNP to calculate either the perturbed tally (METHOD=-1, -2, -3) or the change in the unperturbed tally (METHOD=1, 2, 3). In summation, a powerful use-case for the MCNP code PERT card is that it facilitates calculating tally sensitivities to nuclear data. Writing PERT card entries and parsing output MCTAL files is tedious and error prone. however, Easy_PERT makes use of existing tools (Faust and MCNPTools) to handle writing PERT card entries and parsing the output MCTAL files. The PERT card is early in the development process and planned upcoming capabilities include calculating sensitivities and combining MCTAL files from separate runs into one JSON file.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Non-Equilibrium Processes, Stability, Design and Control of Pulsed Plasmas for Materials Processing

The energy and angle of impact of ions, interspersed with fluxes of neutral radicals, on the surface of wafers during plasma materials processing are critical parameters for the fabrication of microelectronic devices, nanostructure materials and biocompatible materials. This sensitivity extends to nearly all applications of plasmas to materials processing and surface modification. Low temperature plasmas for plasma materials processing have traditionally used continuously excited plasmas. However, pulsed plasma processing is an enabling technology for achieving finer resolution of microelectronics fabrication and for producing unique surface properties in a wide range of applications. This research project is addressing fundamental plasma physics issues in materials processing – the control of pulsed plasmas and the means for optimizing plasma produced reactant fluxes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Herbaceous Feedstock 2018 State of Technology Report

The U.S. Department of Energy (DOE) promotes the production of advanced liquid transportation fuels from lignocellulosic biomass by funding fundamental and applied research that advances the state of technology (SOT). As part of its involvement with this mission, Idaho National Laboratory (INL) completes an annual SOT report for biomass feedstock logistics. This report summarizes supply system impacts of Bioenergy Technologies Office (BETO)-funded research and development efforts at INL and elsewhere (such as the High-Tonnage Feedstock Logistics projects (Webb et al. 2013a, Webb et al. 2013b, Webb et al. 2013c, Webb and Sokhansanj 2014, Sokhansanj et al. 2014) that lead to improvements in feedstock supply systems. These include improvements to and observed performance of innovative harvest and collection methods, storage technologies, transportation and handling approaches, and advanced preprocessing technologies. Biomass quality and variability, and the interface between feedstock quality and conversion performance are key drivers in addition to delivered feedstock cost. In this report, we estimate the benefits of R&D improvements to individual supply system unit operations, and present the status of feedstock logistics technology development for converting biomass into biofuels. These analyses are supported by experimental data where possible, and help to align the SOT relative to the cost goals defined in the Multi-Year Program Plan. The 2018 Herbaceous SOT aligned feedstock logistic design with current biorefinery’s design capacity utilized by biochemical conversion platform. Currently biochemical conversion platform utilizes a 725,000 dry ton/year biorefiney design for the techno economic analysis. Hence, feedstock delivered cost in the 2018 Herbaceous SOT is calculated based on biorefinery’s 725,000 dry ton design capacity instead of 800, 000 dry ton capacity utilized in the 2017 Herbaceous SOT. Biomass availabilities in this SOT were updated to year 2018 data from the 2016 Billion-Ton Report (BT16) (DOE 2016a), with the exception of switchgrass, for which the 2018 Herbaceous SOT utilized the 2019 switchgrass availability data from BT16. The BT16 report (DOE 2016a) does not project switchgrass availability in 2018; the soonest switchgrass is available in the BT16 report is 2019. Therefore, availability of switchgrass for this analysis was that projected for 2019. The 2018 Herbaceous SOT incorporates same technologies utilized in the 2017 Herbaceous SOT. However, a sensitivity analysis is performed to understand the impact of variation of process parameters on those technologies on feedstock logistic cost. New R&D data that shows the variations of process parameters affecting process performance is incorporated in the 2018 SOT to measure the variations in delivered feedstock cost. The 2018 Herbaceous SOT has also provided projected delivered feedstock of 2022 design case based on near term technical target under BETO funded R&D project. Finally, updated biorefinery size of 725,000 dry ton/year was incorporated within least-cost formulation model to select optimal siting and depot scales during optimization of the least cost blend. This modification to the optimization algorithm allows the trade-off between the cost of increased supply radius and the savings from selecting biomass from higher producing counties to be assessed. Such optimization has also showed the economic benefit of decentralized depots in comparison to centralized preprocessing co-located with the biorefinery by decoupling the biorefinery and feedstock locations. The 2018 Herbaceous SOT report documents the current modeled cost of a herbaceous feedstock supply system (from harvest to the pretreatment reactor throat, including grower payment) for hydrocarbon fuel production via biochemical conversion, based on equipment and processes now available or potentially available in the near term. The modeled cost also considers both the required quality and the availability of the biomass resources. The 2018 Herbaceous SOT predicts a modeled delivered feedstock cost of $83.67/dry ton (2016$); this is a $0.23/dry ton (2016$) decrease from the 2017 Herbaceous SOT. The modification of biorefinery’s designed capacity and increased projected biomass availability in the same supply shed contributed to this modeled cost reduction. The least-cost formulation model to optimally site and scale local distributed preprocessing depots also contributed to the cost reduction by considering county-level grower payment and distance from the biorefinery as variables in the optimization algorithm. Sensitivity analysis on various process parameters that affect delivered feedstock cost in the 2018 Herbaceous SOT shows that the delivered cost could varies from $80.45-$88.83/dry ton. The top factors that causes such variations are: effective baling rate, bale density, hammer mill throughput, interest rate and storage dry matter loss.

09 BIOMASS FUELS↗

Structural damage response of lanthanum and yttrium aluminate crystals to nuclear collisions and electronic excitation: Threshold assessment of irradiation damage

A comparative analysis is performed on the structural damage response and associated mechanisms in lanthanum aluminate and yttrium aluminate crystals under various irradiation conditions by a combination of experimental and theoretical approaches. Under low-energy Au+ irradiation, the damage accumulation curve shows a higher damage rate for LaAlO 3 crystals than YAlO 3 crystals. The relatively low irradiation tolerance of LaAlO 3 to the action of nuclear collisions is ascribed to the large amorphization cross-section and effective cross-section for defect-stimulated amorphization. Under swift Ar 12+ , Ni 19+ and Kr 17+ irradiation with different ion energies and velocities, the formed highly-disordered/amorphous latent tracks with different morphologies in pristine and predamaged crystals are discussed, and the corresponding electronic energy loss and lattice temperature thresholds are quantitatively determined. Compared to YAlO 3 , LaAlO 3 exhibits lower sensitivity and higher damage tolerance to the electronic energy loss process, attributing to its relatively high recrystallization efficiency during the rapid quenching process. Furthermore, the introduction of lattice defects into LaAlO 3 and YAlO 3 crystals considerably enhances the sensitivity and intensity of thermal spike response to the electronic energy loss, and the induced effective modification of track morphologies demonstrates the synergistic effect between the electronic energy loss and pre-existing defects created by nuclear collisions. In this case, even under the action of electronic energy loss below the threshold, the lattice temperature in the nuclear-collision damaged crystalline system could still meet the criterion for track production. The irradiation energy deposited to atoms and induced lattice temperature evolution discussed in this work provide a deeper insight into the complex processes involved in irradiation-induced latent track behaviors.

36 MATERIALS SCIENCE↗

Picoflow Liquid Chromatography–Mass Spectrometry for Ultrasensitive Bottom-Up Proteomics Using 2-μm-i.d. Open Tubular Columns

In many areas of applications key objectives of chemical separations and analysis are to minimize the sample quantity while maximizing the chemical information obtained. Increasing measurement sensitivity is especially critical for proteomics research, especially when processing trace samples and where multiple measurements are desired. A rich collection of technologies has been developed, but the resulting sensitivity remains insufficient for achieving in-depth coverage of proteomic samples as small as single cells. In this paper, we combine picoliter-scale liquid chromatography (picoLC) with mass spectrometry (MS) to address this issue. The picoLC employs 2-µm-i.d. open tubular column to reduce the sample input needed to greatly increase the sensitivity achieved using electrospray ionization (ESI) with MS. With this picoLC-MS system, we show that we can identify ~1000 proteins reliably using only 30 pg of tryptic peptides, representing a 10–100-fold sensitivity improvement compared with the state-of-the-art liquid chromatography (LC) or capillary electrophoresis (CE)-MS methods. PicoLC-MS extends the limit of separation science and is expected to be a powerful tool for single cell proteomics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-Resolution Three-Dimensional Sculpting of Two-Dimensional Graphene Oxide by E-Beam Direct Write

On demand switchable additive/subtractive patterning of 2D nanomaterials is an essential capability for developing new concepts of functional nanomaterials and their device realizations. Traditionally, this is performed via a multi-step process using photoresist coating and patterning by conventional photo or electron beam lithography, which is followed by bulk dry/wet etch or deposition. This limits the range of functionalities and structural topologies that can be achieved, as well as increases the complexity, cost, and possibility of contamination which are significant barriers to device fabrication from highly sensitive 2D materials. Focused electron beam induced processing (FEBIP) enables a material chemistry/site-specific, high-resolution multi-mode atomic scale processing and provides unprecedented opportunities for direct-write, single-step surface patterning of 2D nanomaterials with an in-situ imaging capability. It allows for realizing a rapid multi-scale/multi-mode approach, ranging from an atomic scale manipulation (e.g., via targeted defect introduction as an active site) to a large-area surface modification on nano and micro scales, including patterned doping and material removal/deposition with 2D (in-plane)/3D (out-of-plane) control. In this work, we report on a new capability of FEBIP for nanoscale patterning of graphene oxide via removal of oxygenated carbon moieties with no use of reactive gas required for etching complemented by carbon atom deposition using focused electron beam. The mechanism of experimentally observed phenomena is explored using the density functional theory (DFT) calculations, revealing that interactions of e-beam liberated reactive oxygen radicals with carbon atoms on graphene basal plane lead to creation of atomic vacancies in the material. The reaction by-products are volatile carbon di-oxides, which are dissociated and volatilized from the graphene oxide surface functional groups by interactions with an energetic focused electron beam. Along with selective “subtractive” patterning of graphene oxide, the same electron beam with increased irradiation doses can deposit out-of-plane 3D carbon nanostructures on top of or around the 2D etched pattern, thus forming a hybrid 2D/3D nanocomposite with feature control down to a few nanometers. Furthermore, this in-operando dual nanofabrication capability of FEBIP is unmatched by any other nanopatterning techniques and opens a new design window for forming 2D/3D complex nanostructures and functional nanodevices.

36 MATERIALS SCIENCE↗

First inverse kinematics measurement of resonances in Be 7 ( α , γ ) C 11 relevant to neutrino-driven wind nucleosynthesis using DRAGON

A possible mechanism to explain the origin of the light $\textit{p}$ nuclei in the Galaxy is the nucleosynthesis in the proton-rich neutrino-driven wind ejecta of core-collapse supernovas via the $\textit{νp}$ process. However, this production scenario is very sensitive to the underlying supernova dynamics and the nuclear physics input. As far as the nuclear uncertainties are concerned, the breakout from the $\textit{pp}$ chains via the 7 Be(α,γ) 11 C reaction has been identified as an important link which can influence the nuclear flow and, therefore, the efficiency of the $\textit{νp}$ process. However, its reaction rate is poorly known over the relevant temperature range, $\textit{T}$ = 1.5–3 GK. We report on the first direct measurement of two resonances of the 7 Be(α,γ) 11 C reaction with previously unknown strengths using an intense radioactive 7 Be beam from the Isotope Separator and Accelerator (ISAC-I) Center facility and the DRAGON recoil separator in inverse kinematics. In this work, we have decreased the 7 Be(α,γ) 11 C reaction rate uncertainty to ≈9.4–10.7% over the relevant temperature region.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Effect of Pre- and Post-Coat Processing on the Fatigue Life of Coated Disk Alloys

Increasing temperatures in aero gas turbines is resulting in oxidation and hot corrosion attack of turbine disks. Since disks are sensitive to low cycle fatigue (LCF), any environmental attack, and especially hot corrosion pitting, can seriously degrade the life of the disk. Application of metallic coatings is one means of protecting disk alloys from this environmental attack. However, since LCF is sensitive to surface conditions, pre- and post-coat processing can have a significant effect on the LCF life of coated bars. Various pre-and post-coating conditions were examined with a Ni-45wt. Cr coating applied by High-power impulse magnetron sputtering (HiPiMS) to a Ni-based disk alloy. Initial pre-coat surface conditions examined a grit blasted surface. Later pre-coat surface treatments involved wet blasting, two shot peening levels (8N-200 and 16N-200) and a highly polished surface. Post-coat treatments involved two shot peening levels (4N-100 and 16N-200) and a post-coat diffusion anneal in high purity Ar or a low PO2 environment to encourage chromia scale formation. Half of the coated and uncoated bars were LCF tested at 760C without further environmental exposure to evaluate the pre- and post-coat treatments. The second half of samples were either oxidized for 500 hours at 760C in air, hot corroded for 50 hours at 760C in air using a Na2SO4-MgSO4 salt, or subjected to both exposures. Results of the LCF testing and post-test characterization of the various coatings will be presented and future research directions discussed.

LCF Life↗

Sensitivity analysis of a parameterization of coagulation in an aqueous transport model

A three-dimensional aqueous transport model, ALGE, was developed at the Savannah River National Laboratory (SRNL) as a tool for emergency response. Recently, coagulation and break-up of sediment and particulate (contaminant adhered to sediment) matter has been added as a new model capability, representing both processes as functions of salinity and turbulence. A sensitivity analysis was performed by comparing time series of sediment and particulate concentrations at various locations when the model’s parameters (particle size and density) are altered. The results show significant differences between experiments in both freshwater and saltwater systems parameters vary (P-values < 0.05). From this sensitivity study, we have concluded the importance of incorporating both salinity and turbulent effects, as they have a large role in the physical process of coagulation and breakup of sediment. By accounting for these physical processes, we have made the ALGE model a more robust tool for emergency response.

Aqueous fate and transport↗

Synthesis of an aqueous, air-stable, superconducting 1T'-WS 2 monolayer

Liquid-phase chemical exfoliation can achieve industry-scale production of two-dimensional (2D) materials for a wide range of applications. However, many 2D materials with potential applications in quantum technologies often fail to leave the laboratory setting because of their air sensitivity and depreciation of physical performance after chemical processing. We report a simple chemical exfoliation method to create a stable, aqueous, surfactant-free, superconducting ink containing phase-pure 1T'-WS 2 monolayers that are isostructural to the air-sensitive topological insulator 1T'-WTe 2 . The printed film is metallic at room temperature and superconducting below 7.3 kelvin, shows strong anisotropic unconventional superconducting behavior with an in-plane and out-of-plane upper critical magnetic field of 30.1 and 5.3 tesla, and is stable at ambient conditions for at least 30 days. Our results show that chemical processing can make nontrivial 2D materials that were formerly only studied in laboratories commercially accessible.

36 MATERIALS SCIENCE↗

A Novel Additive Manufacturing Process Metric for Predicting Spatter-related Porosity in Laser Powder Bed Fusion

Components fabricated using the powder bed fusion laser beam metallic (PBF) additive manufacturing (AM) process comprise a multitude of sequential weld passes. Porosity defects resulting from weld pass inconsistencies are a concern for PBF materials and have a strong adverse effect on the mechanical properties. In an effort to understand and avoid spatter induced porosity, this work aims to provide a novel computational technique that can be used to quantify and predict the sequence-sensitive impact of spatter upon the PBF process stability and consequential porosity in as-printed material. A novel spatter impact AM model-based process metric (AM-PM) is introduced to model and quantify the impact that spatter has on the PBF process. The occurrence of spatter induced porosity is studied using thermal rise, lack of fusion, and spatter impact AM-PMs synchronized with porosity measured by high-resolution X-ray computed tomography. Six cylindrical specimens were designed to compare the AM-PM correlations with porosity across two different laser powers and three hatch scanning strategies. A point field based computational approach is shown to be effective for testing the influence of the different AM-PMs and interrogating the physical process conditions underlying the porosity formation. Further, characterization using optical metallography and scanning electron microscopy indicated that both keyhole and lack of fusion porosity correlated with the spatter impact AM-PM, which can be exploited to predict and control spatter related porosity by the hatch strategy. Efforts to predict porosity composition within PBF material should incorporate the PBF process disturbances that can result from spatter. The spatter impact AM-PM can be readily incorporated into the development of defect prediction models at the part scale.

Additive Manufacturing↗

Ecosystems and Networks Integrated with Genes and Molecular Assemblies (ENIGMA) (Final Scientific/Technical Report, Subcontract Award No. 6953691)

The overarching objective the Baliga lab is to develop a mechanistic understanding of the field relevant metabolic processes underlying community partitioning of respiration pathways and physiological state shifts. In order to dissect how environmental perturbations influence microbial regulatory networks, we have constructed data-driven models that capture the dynamic interplay between abiotic and biotic factors during laboratory simulations. Specifically, we have developed multiple computational models (i.e., cMonkey2, EGRIN 2.0, and multiple genome-scale metabolic models) connecting environmental influence to genome-encoded regulatory programs. In addition, we have generated new tools such as Live Anaerobic Cell Sorting (LAnCS) and Fluidized Bed Reactors (FBRs) to investigate the dynamics of community partitioning of metabolic processes supporting sulfate or nitrate respiration, which are two critical activities observed from the field site at Oak Ridge National Labs (ORNL). This framework of connecting field phenomena with laboratory simulations and computational modeling has created the Environmental Simulations and Modelling (EnvSim) campaign within ENIGMA. The campaign, which spans multiple laboratories across ENIGMA and is led by the Baliga group, has established synthetic communities (SynComs) to discover, characterize, and dissect key microbial processes relevant to field observations, such as emissions of the greenhouse gas nitrous oxide (N 2 O). For example, the EnvSim campaign so far has deduced four potential mechanisms that may account for the N 2 O emissions at the FRC and are currently being investigated by labs across ENIGMA. Denitrification may be driven by complete denitrifiers, however, their NosZ enzymes, which catalyze the final step in denitrification by converting N 2 O to N 2 , may be sensitive at a lower pH. Additionally, the denitrification process could be partitioned among organisms and some may have pH-sensitive NosZ genes. Another factor contributing to variable N 2 O emissions relates to the metal co-factors involved in the denitrification pathway. For instance, excess Cu, Al, Mn, U, Ni, Co, Cu, and/or Cd may have inhibitory effects on multiple enzymatic steps during denitrification, while the enzymatic production of nitrite, the precursor of N 2 O, can be limited by the essential metal Mo. Lastly, abiotic production of N 2 O may occur as a result of chemodenitrification, in which metals like Fe, Mn, and some organic compounds can drive redox reactions that convert nitrogen cycle intermediates to N 2 O under the right conditions. Current investigations and analyses have generated multiple transcriptomic profiles aiding the refinement of new metabolic and gene regulatory network model for our denitrifying SynCom. In sum, the previous funding cycle has generated 33 peer-reviewed publications spanning predictive network biology to co-operativity of mutualistic interspecies interactions of evolved communities. Our integration of multiple omics datasets and the development of new network modelling tools has revealed important insights that can explain field observed phenomenon and generated new hypotheses to be investigated in the field.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermophysical property sensitivity effects in steel solidification

The simulation of advanced solidification processes via digital computer techniques has gained widespread acceptance during the last decade or so. Models today can predict transient temperature fields, fluid flow fields, important microstructural parameters, and potential defects in castings. However, the lack of accurate thermophysical property data on important industrial alloys threatens to limit the ability of manufacturers to fully capitalize on the technology's benefits. A study of the sensitivity of one such numerical model of a steel plate casting to imposed variations in the data utilized for the thermal conductivity, specific heat, density, and heat of fusion is described. The sensitivity of the data's variability is characterized by its effects on the net solidification time of various points along the centerline of the plate casting. Recommendations for property measurements are given and the implications of data uncertainty for modelers are discussed.

Overfelt, Tony↗

An Integrated Control and Minimum Mass Structural Optimization Algorithm for Large Space Structures

A new approach is discussed for solving dual structural control optimization problems for high-order flexible space structures, where reduced-order structural models are employed and minimum mass designs are sought. For a given initial structural design, a quadratic control cost is minimized subject to a constant-mass constraint. The sensitivity of the optimal control cost with respect to the structural design variables is then determined and used to obtain successive structural redesigns, using a constrained gradient optimization algorithm. This process is repeated until the constrained control cost sensitivity becomes negligible. The minimum mass design is obtained by solving a sequence of neighboring optimal constant mass designs, where the sequence of optimal performance indices has a minimum at the optimal minimum mass design. A numerical example is presented which demonstrates that this new approach effectively addresses the problem of dual optimization for potentially very high-order structures.

Messac, A.↗

Dual structural-control optimization of large space structures

A new approach is proposed for solving dual structural-control optimization problems for high-order flexible space structures where reduced-order structural models are employed. For a given initial structural dessign, a quadratic control cost is minimized subject to a constant-mass constraint. The sensitivity of the optimal control cost with respect to the stuctural design variables is then determined and used to obtain successive structural redesigns using a contrained gradient optimization algorithm. This process is repeated until the constrained control cost sensitivity becomes negligible. A numerical example is presented which demonstrates that this new approach effectively addresses the problem of dual optimization for potentially very high-order structures.

Messac, A.↗

Evaluation of Methods for Multidisciplinary Design Optimization (MDO)

A new MDO method, BLISS, and two different variants of the method, BLISS/RS and BLISS/S, have been implemented using iSIGHT's scripting language and evaluated in this report on multidisciplinary problems. All of these methods are based on decomposing a modular system optimization system into several subtasks optimization, that may be executed concurrently, and the system optimization that coordinates the subtasks optimization. The BLISS method and its variants are well suited for exploiting the concurrent processing capabilities in a multiprocessor machine. Several steps, including the local sensitivity analysis, local optimization, response surfaces construction and updates are all ideally suited for concurrent processing. Needless to mention, such algorithms that can effectively exploit the concurrent processing capabilities of the compute servers will be a key requirement for solving large-scale industrial design problems, such as the automotive vehicle problem detailed in Section 3.4.

Kodiyalam, Srinivas↗

Multidisciplinary Design Optimization (MDO) Methods: Their Synergy with Computer Technology in Design Process

The paper identifies speed, agility, human interface, generation of sensitivity information, task decomposition, and data transmission (including storage) as important attributes for a computer environment to have in order to support engineering design effectively. It is argued that when examined in terms of these attributes the presently available environment can be shown to be inadequate a radical improvement is needed, and it may be achieved by combining new methods that have recently emerged from multidisciplinary design optimization (MDO) with massively parallel processing computer technology. The caveat is that, for successful use of that technology in engineering computing, new paradigms for computing will have to be developed - specifically, innovative algorithms that are intrinsically parallel so that their performance scales up linearly with the number of processors. It may be speculated that the idea of simulating a complex behavior by interaction of a large number of very simple models may be an inspiration for the above algorithms, the cellular automata are an example. Because of the long lead time needed to develop and mature new paradigms, development should be now, even though the widespread availability of massively parallel processing is still a few years away.

Sobieszczanski-Sobieski, Jaroslaw↗

Multidisciplinary Design Optimisation (MDO) Methods: Their Synergy with Computer Technology in the Design Process

The paper identifies speed, agility, human interface, generation of sensitivity information, task decomposition, and data transmission (including storage) as important attributes for a computer environment to have in order to support engineering design effectively. It is argued that when examined in terms of these attributes the presently available environment can be shown to be inadequate. A radical improvement is needed, and it may be achieved by combining new methods that have recently emerged from multidisciplinary design optimisation (MDO) with massively parallel processing computer technology. The caveat is that, for successful use of that technology in engineering computing, new paradigms for computing will have to be developed - specifically, innovative algorithms that are intrinsically parallel so that their performance scales up linearly with the number of processors. It may be speculated that the idea of simulating a complex behaviour by interaction of a large number of very simple models may be an inspiration for the above algorithms; the cellular automata are an example. Because of the long lead time needed to develop and mature new paradigms, development should begin now, even though the widespread availability of massively parallel processing is still a few years away.

Sobieszczanski-Sobieski, Jaroslaw↗