SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A general study is presented of the mapping functions which relate the magnetic-field profiles across a force-free rope in segments subjected to various external pressures. The results reveal that if the external pressure falls below a certain critical level (dependent on the flux-current relation which defines the tube), the magnetic profile consists of an invariant core sheathed in a layer permeated by an azimuthal magnetic field.
Re-entrant groove technology was extended to hydrogen heat pipes. Parametric analyses are presented which optimize the theoretical design while considering the limitations of state-of-the-art extrusion technology. The 6063-T6 aluminum extrusion is 14.6 mm OD with a wall thickness of 1.66 mm and contains 20 axial grooves which surround a central 9.3 mm diameter vapor core. Each axial groove is 0.775 mm diameter with a 0.33 mm opening. An excess vapor reservoir is provided at the evaporator to minimize the pressure containment hazard during ambient storage. Modifications to the basic re-entrant groove profile resulted in improved overall performance. While the maximum heat transport capacity decreased slightly to 103 w-m the static wicking height increased markedly to 4.5 cm. The heat pipe became operational between 20 and 30 K after a cooldown from 77 K without any difficulty. Steady state performance data taken over a 19 to 23 K temperature range indicated: (1) maximum heat transport capacity of 5.4 w-m; (2) static wicking height of 1.42 cm; and (3) overall heat pipe conductance of 1.7 watts/deg C.
A single stage, low aspect ratio, compressor with a 442.0 m/sec (1450 ft/sec) tip speed and a 0.597 hub/tip ratio typical of an advanced core compressor front stage was tested. The test stage incorporated an inlet duct which was representative of an engine transition duct between fan and high pressure compressors. At design speed, the rotor stator stage achieved a peak adiabatic efficiency of 86.6 percent at a flow of 44.35 kg/sec (97.8 lbm/sec) and a pressure ratio of 1.8. Surge margin was 12.5 percent from the peak stage efficiency point.
The results of VLA observations and possible models for the peculiar structure of 3C 338, a two-arcmin radio source associated with the cD galaxy NGC 6166 in Abell 2199, are presented. The optical parameters for Abell 2199 and NGc 6166 are reviewed, and the VLA observations and reductions are described. The radio structure of 3C 338 including spectral index and polarization distributions are also discussed. Two possible origins for the ridge structure located to the south of the core which has some characteristics of a jet are proposed. The first involves a cooling accretion flow of ICM material onto the cD. The ram pressure of a highly asymmetric flow seems to be sufficient to confine the radio ridge using an accretion rate of 100 solar masses/yr. The second model presumes that the ridge is actually an aged radio jet. The radio engine would have to be intermittent with a period of about ten million years.
This grant funded a research program to use infrared extinction measurements to probe the detailed structure of dark molecular clouds and investigate the physical conditions which give rise to star and planet formation. The goals of the this program were to: 1) acquire deep infrared and molecular-line observations of a carefully selected sample of nearby dark clouds, 2) reduce and analyze the data obtained in order to produce detailed extinction maps of the clouds, 3) use the results to measure and quantitatively describe the physical conditions of the dense gas and dust that produce stars and their accompanying planetary systems in molecular clouds. The goals of this project were met and exceeded as described below. 1) The infrared data for the project were obtained in a number of observing runs using the 3.5-meter NTT and 8-meter VLT telescopes of the European Southern Observatory in Chile and the 1.2-meter telescope of the Smithsonian Astrophysical Observatory in Arizona, the 1 0-meter Keck telescope in Hawaii, the 6.5-meter MMT of the Smithsonian Astrophysical Observatory in Arizona, and the NASA Hubble Space Telescope. The molecular-line data was obtained in three runs using the IRAM 30-meter telescope in Spain and one run with the ESO-15 meter millimeter-wave telescope in Chile. Millimeter-wave continuum measurements were obtained with the 15-meter JCMT in Hawaii. 2) Considerable effort was expended to reduce the infrared imaging observations including the development of custom software to produce high quality photometry and source astrometry. All the millimeter-line data was reduced using standard reduction routines. The highlights of the infrared analysis were the production of detailed extinction maps and the construction of profiles of the density structure of the B68, Coalsack, B335 and Lupus clouds. 3) The principal scientific accomplishments of this research program include the following: We were able to use our infrared observations to determine the density structure of the B68 cloud to an unprecedented level of precision. This lead to a major breakthrough in the study of molecular cloud structure. For the first time we have been able to characterize the structure of a dark cloud in a detail only exceeded by that known for a star. We determined that the cloud's structure is exquisitely well described by the equations of a Bonner-Ebert sphere (a pressure confined isothermal sphere). We were able to show that the cloud is very nearly in equilibrium with the internal thermal pressure of the cloud balancing gravity and the external pressure of the surrounding interstellar medium. We were able to determine for the first time the gas-to-dust ratio in a dense cloud core. We also demonstrated a new method to determine extremely precise distances to such clouds by combining knowledge of the properties of Bonner-Ebert Spheres with our infrared and millimeter-wave observations.
The topics include: 1) Flight Test Results from the Rake Airflow Gage Experiment on the F-15B; 2) Telemetry and Science Data Software System; 3) CropEx Web-Based Agricultural Monitoring and Decision Support; 4) High-Performance Data Analysis Tools for Sun-Earth Connection Missions; 5) Experiment in Onboard Synthetic Aperture Radar Data Processing; 6) Microfabrication of a High-Throughput Nanochannel Delivery/Filtration System; 7) Improved Design and Fabrication of Hydrated-Salt Pills; 8) Monolithic Flexure Pre-Stressed Ultrasonic Horns; 9) Cryogenic Quenching Process for Electronic Part Screening; 10) Broadband Via-Less Microwave Crossover Using Microstrip-CPW Transitions; 11) Wheel-Based Ice Sensors for Road Vehicles; 12) G-DYN Multibody Dynamics Engine; 13) Multibody Simulation Software Testbed for Small-Body Exploration and Sampling; 14) Propulsive Reaction Control System Model; 15) Licklider Transmission Protocol Implementation; 16) Core Recursive Hierarchical Image Segmentation; 17) Two-Stage Centrifugal Fan; 18) Combined Structural and Trajectory Control of Variable-Geometry Planetary Entry Systems; 19) Pressure Regulator With Internal Ejector Circulation Pump, Flow and Pressure Measurement Porting, and Fuel Cell System Integration Options; 20) Temperature-Sensitive Coating Sensor Based on Hematite; 21) Standardization of a Volumetric Displacement Measurement for Two-Body Abrasion Scratch Test Data Analysis; 22) Detection of Carbon Monoxide Using Polymer-Carbon Composite Films; 23) Substituted Quaternary Ammonium Salts Improve Low-Temperature Performance of Double-Layer Capacitors; 24) Sustainably Sourced, Thermally Resistant, Radiation Hard Biopolymer; 25) Integrated Lens Antennas for Multi-Pixel Receivers; 26) 180-GHz Interferometric Imager; 27) Maturation of Structural Health Management Systems for Solid Rocket Motors; 28) Validating Phasing and Geometry of Large Focal Plane Arrays; 29) Transverse Pupil Shifts for Adaptive Optics Non-Common Path Calibration; 30) Qualification of Fiber Optic Cables for Martian Extreme Temperature Environments; 31) Solid-State Spectral Light Source System; 32) Multiple-Event, Single-Photon Counting Imaging Sensor; 33) Surface Modeling to Support Small-Body Spacecraft Exploration and Proximity Operations; and 34) Achieving Exact and Constant Turnaround Ratio in a DDS-Based Coherent Transponder.
The linear hydrodynamic stability of a thin-liquid layer flowing along the inside wall of a vertical tube rotating about its axis in the presence of a core-gas flow is examined. The stability problem is formulated under the conditions that the liquid film is thin, the density and viscosity ratios of gas to liquid are small and the relative (axial) pressure gradient in the gas is of the same order as gravity. The resulting eigenvalue problem is first solved by a perturbation method appropriate to axisymmetric long-wave disturbances. The damped nature (to within the thin-film and other approximations made) of the nonaxisymmetric and short-wave disturbances is noted. In view of the limitations on a truncated perturbation solution when the disturbance wavenumber is not small, an initial value method using digital computer is presented. Stability characteristics of neutral, growing, and damped modes are presented showing the influences of rotation, surface tension, and the core-gas flow. Energy balance in a neutral mode is also illustrated.
This paper extends the development of reentrant groove technology to hydrogen heat pipes. Parametric analyses are presented which optimize the theoretical design while considering the limitations of state-of-the-art extrusion technology. Acceptable production-type runs of extruded lengths (over 300 m) could only be achieved at the expense of a wider nominal groove opening than specified (0.33 mm vs. 0.20 mm). However, dimensional variations of other critical dimensions were within 0.05 mm, which exceeded expectations. The 6063-T6 aluminum extrusion is 14.6 mm OD with a wall thickness of 1.66 mm and contains 20 axial grooves which surround a central 9.3-mm-diam vapor core. Each axial groove is 0.775-mm-diam with a 0.33 mm opening. An excess vapor reservoir is provided at the evaporator to minimize the pressure containment hazard during ambient storage. Details of the instrumentation and helium-cooled test installation are also presented.
Methods developed at the NASA Lewis Research Center for predicting the noise contributions from various aircraft noise sources were programmed to predict aircraft noise levels either in flight or in ground tests. The noise sources include fan inlet and exhaust, jet, flap (for powered lift), core (combustor), turbine, and airframe. Noise propagation corrections are available for atmospheric attenuation, ground reflections, extra ground attenuation, and shielding. Outputs can include spectra, overall sound pressure level, perceived noise level, tone-weighted perceived noise level, and effective perceived noise level at locations specified by the user. Footprint contour coordinates and approximate footprint areas can also be calculated. Inputs and outputs can be in either System International or U.S. customary units. The subroutines for each noise source and propagation correction are described. A complete listing is given.
A solenoid valve is described in which both an inlet and an outlet of the valve are sealed when the valve is closed. This double seal compensates for leakage at either the inlet or the outlet by making the other seal more effective in response to the leakage and allows the reversal of the flow direction by simply switching the inlet and outlet connections. The solenoid valve has a valve chamber within the valve body. Inlet and outlet tubes extend through a plate into the chamber. A movable core in the chamber extends into the solenoid coil. The distal end of the core has a silicone rubber plug. Other than when the solenoid is energized, the compressed spring biases the core downward so that the surface of the plug is in sealing engagement with the ends of the tubes. A leak at either end increases the pressure in the chamber, resulting in increased sealing force of the plug.
A reanalysis of the evolution configuration module pattern for Space Station Freedom is presented. The module pattern is to consist of one habitation module, one airlock, one cupola, two Space Shuttle Orbiter pressurized docking adapters, one assured crew return vehicle, and one pressurized logistics module. Three laboratory modules are also included. A phased plan has been developed on the basis of utilization analysis being performed and derived through actual and projected user mission requirements for the growth of pressurized elements. The evolution requirement impacts to the module pattern are outlined. Application of the growth philosophy and the physical limitations resulted in a number of core element ground rules for module pattern growth. Nodes and modules are to be grown symmetrically in order to optimize poor flight control characteristics and maximize the capability for crew dual egress between elements. Core module pattern elements are not to be grown along Y-Y axis from nodes 1 or 2 due to physical clearance problems with the thermal control system radiators operational envelope.
The present volume on fiber-optic and laser sensors discusses industrial applications of fiber-optic sensors, fiber-optic temperature sensors, fiber-optic current sensors, fiber-optic pressure/displacement/vibration sensors, and generic fiber-optic systems. Attention is given to a fiber-sensor design for turbine engines, fiber-optic remote Fourier transform IR spectroscopy, near-IR fiber-optic temperature sensors, and an intensity-type fiber-optic electric current sensor. Topics addressed include fiber-optic magnetic field sensors based on the Faraday effect in new materials, diaphragm size and sensitivity for fiber-optic pressure sensors, a microbend pressure sensor for high-temperature environments, and linear position sensing by light exchange between two lossy waveguides. Also discussed are two-mode elliptical-core fiber sensors for measurement of strain and temperature, a fiber-optic interferometric X-ray dosimeter, fiber-optic interferometric sensors using multimode fibers, and optical fiber sensing of corona discharges.
The depletion of the siderophile elements in the Earth's upper mantle relative to the chondritic meteorites is a geochemical imprint of core segregation. Therefore, metal/silicate partition coefficients (Dm/s) for siderophile elements are essential to investigations of core formation when used in conjunction with the pattern of elemental abundances in the Earth's mantle. The partitioning of siderophile elements is controlled by temperature, pressure, oxygen fugacity, and by the compositions of the metal and silicate phases. Several recent studies have shown the importance of silicate melt composition on the partitioning of siderophile elements between silicate and metallic liquids. It has been demonstrated that many elements display increased solubility in less polymerized (mafic) melts. However, the importance of silicate melt composition was believed to be minor compared to the influence of oxygen fugacity until studies showed that melt composition is an important factor at high pressures and temperatures. It was found that melt composition is also important for partitioning of high valency siderophile elements. Atmospheric experiments were conducted, varying only silicate melt composition, to assess the importance of silicate melt composition for the partitioning of W, Co and Ga and found that the valence of the dissolving species plays an important role in determining the effect of composition on solubility. In this study, we extend the data set to higher pressures and investigate the role of silicate melt composition on the partitioning of the siderophile elements W, Ge, Ga and Ni between metallic and silicate liquid.
The formative stages of the onset of the 1979 southwest monsoon was marked by a WNW-ESE oriented band of marine convection over the South Arabian Sea. This convection was first observed on June 10, 1979 using satellite cloud imagery. The marine convection appeared during a major acceleration of the upper troposphere easterly wind field. A composite vertical meridional cross-section of upper level winds for June 11, revealed the core of the Tropical Easterly Jet (TEJ) at 115 mb, 9.5 deg N. Time analysis of the upper level wind field over the Tropical Wind Observing Ship (TWOS) polygon show a lowering of both the pressure level of maximum wind and tropopause level with acceleration of the upper level easterlies. The tropopause was as much as 20 mb lower on the equatorial side of the TEJ. Streamline analysis of the maximum observed easterly winds over India did not reveal the horizontal position of the TEJ. Careful analysis of Total Ozone Mapping Spectrometer (TOMS) data for June 11, 1979 showed relatively high values of ozone south of India. It was observed that the latitudinal position of the TEJ on June 11, at approximately 70 deg E coincided with the northern edge of relatively high ozone values. Using this as a reference, the TEJ core was identified as far as NE Bay of Bengal (the limits of the available TOMS data).
An impedance eduction technique, previously validated for ducts with plane waves at the source and duct termination planes, has been extended to support higher-order modes at these locations. Inputs for this method are the acoustic pressures along the source and duct termination planes, and along a microphone array located in a wall either adjacent or opposite to the test liner. A second impedance eduction technique is then presented that eliminates the need for the microphone array. The integrity of both methods is tested using three sound sources, six Mach numbers, and six selected frequencies. Results are presented for both a hardwall and a test liner (with known impedance) consisting of a perforated plate bonded to a honeycomb core. The primary conclusion of the study is that the second method performs well in the presence of higher-order modes and flow. However, the first method performs poorly when most of the microphones are located near acoustic pressure nulls. The negative effects of the acoustic pressure nulls can be mitigated by a judicious choice of the mode structure in the sound source. The paper closes by using the first impedance eduction method to design a rectangular array of 32 microphones for accurate impedance eduction in the NASA LaRC Curved Duct Test Rig in the presence of expected measurement uncertainties, higher order modes, and mean flow.
In this paper, high-spatial-resolution unsteady Pressure Sensitive Paint (uPSP) data are utilized to compare two methods for panel Buffet Forcing Functions (BFF) estimation for the Space Launch System (SLS). Such methods are based on discrete pressure measurements within a panel but employ coherence factors to account for partially-correlated fluctuating pressures across the whole panel. In one method, coherence factors are derived based on the Corcos model, whereas the second method utilizes experimentally-derived coherence factors. To simulate discrete measurements using uPSP data, suitable subsets of the data are extracted. When full uPSP resolution is retained, uPSP data provide a benchmark to assess discrete-measurements-based methods. The analysis focuses on the peak SLS buffet environment located downstream of the Forward Attachment Hardware (FAH) between the core stage and solid rocket boosters. Trends of Corcos-based and experimentally-derived coherence factors are in reasonable agreement with the benchmark. However, at certain frequencies, experimentally-derived coherence factors are sensitive to the separation distance between pressure measurements utilized to compute coherence lengths. Such sensitivity originates from deviation of the experimental-based coherence function from an exponential decay assumption. On the other hand, the present implementation of the Corcos model fails to capture certain non-turbulent boundary layer related environments, such as a subharmonic of FAH vortex-shedding. For all methods presented in this paper, at near transonic conditions, increased pressure coherence and spatial nonuniformity lead to BFF overestimation and sensitivity to the pressure measurement location within the panel.
In this paper, high-spatial-resolution unsteady Pressure Sensitive Paint (uPSP) data are utilized to compare two methods for panel Buffet Forcing Functions (BFF) estimation for the Space Launch System (SLS). Such methods are based on discrete pressure measurements within a panel but employ coherence factors to account for partially-correlated fluctuating pressures across the whole panel. In one method, coherence factors are derived based on the Corcos model, whereas the second method utilizes experimentally-derived coherence factors. To simulate discrete measurements using uPSP data, suitable subsets of the data are extracted. When full uPSP resolution is retained, uPSP data provide a benchmark to assess discrete-measurements-based methods. The analysis focuses on the peak SLS buffet environment located downstream of the Forward Attachment Hardware (FAH) between the core stage and solid rocket boosters. Trends of Corcos-based and experimentally-derived coherence factors are in reasonable agreement with the benchmark. However, at certain frequencies, experimentally-derived coherence factors are sensitive to the separation distance between pressure measurements utilized to compute coherence lengths. Such sensitivity originates from deviation of the experimental-based coherence function from an exponential decay assumption. On the other hand, the present implementation of the Corcos model fails to capture certain nonturbulent boundary layer related environments, such as a subharmonic of FAH vortex-shedding. For all methods presented in this paper, at near transonic conditions, increased pressure coherence and spatial nonuniformity lead to BFF overestimation and sensitivity to the pressure measurement location within the panel.
In this paper, high-spatial-resolution unsteady Pressure Sensitive Paint (uPSP) data are utilized to compare two methods for panel Buffet Forcing Function (BFF) estimation for the Space Launch System (SLS). Such methods are based on discrete pressure measurements within a panel but employ coherence factors to account for partially-correlated fluctuating pressures across the whole panel. In one method, coherence factors are derived based on the Corcos model, whereas the second method utilizes experimentally-derived coherence factors. To simulate discrete measurements using uPSP data, suitable subsets of the data are extracted. When full uPSP resolution is retained, uPSP data provide a benchmark to assess discrete-measurement-based methods. The analysis focuses on the peak SLS buffet environment located downstream of the Forward Attachment Hardware (FAH) between the core stage and solid rocket boosters. Trends of Corcos-based and experimentally-derived coherence factors are in reasonable agreement with the benchmark. However, at certain frequencies, experimentally-derived coherence factors are sensitive to the separation distance between pressure measurements utilized to compute coherence lengths. Such sensitivity originates from deviation of the experimentally-based coherence function from an exponential decay assumption. On the other hand, the present implementation of the Corcos model fails to capture certain nonturbulent boundary layer related environments, such as a subharmonic of FAH vortex-shedding. For all methods presented in this paper, at near transonic conditions, increased pressure coherence and spatial nonuniformity lead to BFF overestimation and sensitivity to the pressure measurement location within the panel.