Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Photocurrent”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Transient and steady state photoelectronic analysis in TlInSe{sub 2} crystals

Highlights: {yields} The steady state and time dependent photoconductivity kinetics of the TlInSe{sub 2} crystals are investigated in the temperature region of 100-350 K. {yields} The photocurrent of the sample exhibited linear, sublinear, and supralinear recombination mechanisms, at, above and below 160 K, respectively. {yields} Steady state photoconductivity revealed two recombination centres located at 234 and 94 meV. {yields} The transient photoconductivity is limited by a trapping center located at 173 meV. {yields} The capture coefficient of the trap for holes was determined as 3.11 x 10{sup -22} cm{sup -2}. -- Abstract: The temperature and illumination effects on the transient and steady state photoconductivities of TlInSe{sub 2} crystals have been studied. Namely, two recombination centres located at 234 and at 94 meV and one trap center located at 173 meV were determined from the temperature-dependent steady state and transient photoconductivities, respectively. The illumination dependence of photoconductivity indicated the domination of sublinear and supralinear recombination mechanisms above and below 160 K, respectively. The change in the recombination mechanism is attributed to the exchange of roles between the linear recombination at the surface and trapping centres in the crystal, which become dominant as temperature decreases. The transient photoconductivity measurement allowed the determination of the capture coefficient of traps for holes as 3.11 x 10{sup -22} cm{sup -2}.

36 MATERIALS SCIENCE↗

Electrical and optical characteristics of surface treated ZnO nanotubes

Highlights: ► ZnO nanotubes were formed onto an ITO glass and were surface treated. ► Photoluminescence and fluorescence imaging for ZnO nanotubes showed blue emission. ► Surface treated samples that showed green emissions. ► Lifetime measurements showed higher excitonic times in surface treated samples. ► Conductance measurements showed significant improvement for the treated samples. -- Abstract: Vertical ZnO nanotubes were electrochemically deposited onto an indium doped tin oxide glass substrate. These nanotubes were surface treated with zinc acetate and annealed at 450 °C, resulting in a nanotubes/nanoparticles composite layer. Scanning electron microscopy of the surface treated samples showed nanoparticles been dispersed uniformly along the ZnO tubular matrix, which was confirmed by X-ray diffractrometry. Photoluminescence and fluorescence microscopy showed untreated ZnO nanotubes exhibiting blue emission, while the treated samples exhibited green emissions. Ultra-violet spectroscopy of treated samples revealed lower band gap values compare to their untreated counterparts. Lifetime measurements showed higher excitonic lifetimes in treated samples. Conductance studies using atomic force microscopy showed significant improvement in the conductance values for the treated samples. A significant increase in photocurrent was observed in treated samples when used as photo-anodes in dye sensitized solar cells.

36 MATERIALS SCIENCE↗

Effects of hydrochloric acid treatment of TiO{sub 2} nanoparticles/nanofibers bilayer film on the photovoltaic properties of dye-sensitized solar cells

Highlights: ► The TiO{sub 2} nanoparticles/TiO{sub 2} nanofibers bilayer film was fabricated for DSSC. ► The effects of HCl treated TiO{sub 2} on the performance of DSSC were investigated. ► The potential methods of improving conversion efficiency are suggested. - Abstract: The TiO{sub 2} nanoparticles/nanofibers bilayer film has been fabricated via spin coating and electrospinning followed by calcination. The TiO{sub 2} bilayer film with thickness of about 6.0 μm is composed of anatase TiO{sub 2} phase. Dye-sensitized solar cells (DSSC) were assembled by hydrochloric acid (HCl) treated TiO{sub 2} film. The results of the photocurrent action spectra, electrochemical impedance spectroscopy (EIS), and I–V curves showed that each photovoltaic parameter of DSSC increased with the concentration of HCl increasing, and reached a maximum value and afterwards decreased. The maximum incident monochromatic photo-to-electron conversion efficiency (at 350 nm) and maximum overall conversion efficiency (η) of 0.05 M HCl treated TiO{sub 2} based DSSC were enhanced to 48.0% and 4.75%, which were respectively increased by 14% and 6.3% than those of DSSC based on untreated TiO{sub 2} film.

36 MATERIALS SCIENCE↗

A study of photocatalytic graphene–TiO{sub 2} synthesis via peroxo titanic acid refluxed sol

Graphical abstract: - Highlights: • TiO{sub 2} synthesized via PTA as a precursor demonstrates exclusively anatase phase. • The TEM image of GR–TiO{sub 2} (PTA) demonstrates that TiO{sub 2} nanoparticles are successfully loaded onto graphene sheet. • The specific surface area seems to increase with increasing weight ratio of graphene oxide. It was observed that GR–TiO{sub 2} showed higher adsorption compared to bare TiO{sub 2} (PTA). • The GR–TiO{sub 2} (PTA, 1:50) catalyst showed higher photocatalytic activity than any other catalyst. - Abstract: In the present work, graphene–TiO{sub 2} (GR–TiO{sub 2}) photocatalyst with various weight ratios of graphene was synthesized using peroxo titanic acid solution (PTA) as a precursor for TiO{sub 2}. Graphene oxide prepared by Hummer's method was converted to graphene under ultraviolet (UV) irradiation in ethanol–water solvent for 48 h. The as-prepared GR–TiO{sub 2} composites were characterized using X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, UV–vis spectrophotometry, and transmission electron microscopy (TEM). The automated potentiostat was applied to measure the photocurrent generations of prepared catalysts. The photocatalytic activities of GR–TiO{sub 2} (PTA) catalysts were determined by measuring the percentage methylene blue (MB) degradation. The results showed that TiO{sub 2} nanoparticles were successfully loaded onto graphene sheet and the surface area of catalysts increased with increasing weight ratio of graphene. In addition, GR–TiO{sub 2} (PTA, 1:50) exhibited the highest photocatalytic activity among the catalysts under UV and visible light irradiation. The adsorption edge of GR–TiO{sub 2} was shifted to a longer wavelength of 400 nm in comparison with that of pure TiO{sub 2} (PTA). The increase in the photocatalytic performance of GR–TiO{sub 2} (PTA) catalyst may be attributed to the increase in surface area, the extension of light absorption in the visible light region, and prevention of charge recombination.

36 MATERIALS SCIENCE↗

Effects of Nd-doping on optical and photovoltaic properties of barium titanate thin films prepared by sol–gel method

Graphical abstract: - Highlights: • We prepared Nd-doped BTO thin films by sol–gel method. • Addition of Nd to some extent can inhibit the grain growth. • Addition of Nd{sup 3+} ions can decrease band gap. • The remnant polarization of Nd-doped BTO thin films begins to increase and then decreases. • Photovoltaic properties of Nd-doped BTO thin films begin to increase then decrease. - Abstract: Nd-doped barium titanate thin films were prepared via sol–gel spin-coating method and effects of Nd content on microstructure, optical and photovoltaic properties have been investigated. The results show that Nd-doped barium titanate thin films are single tetragonal perovskite phase. Addition of neodymium to some extent can inhibit the grain growth. Substitution of Nd{sup 3+} ions for Ba{sup 2+} on A sites leads to the decrease of band gap. The remnant polarization begins to increase and reach the maximum and then decreases as Nd content increases. The short circuit photocurrent density, open circuit photovoltage and power conversion efficiency of Nd-doped barium titanate thin films begin to increase and reach the maximum and then decrease as Nd content increases.

36 MATERIALS SCIENCE↗

Synthesis of visible-light absorbing CoFe{sub 2}O{sub 4} sensitized TiO{sub 2} nanotube arrays electrode with enhanced photoelectrochemical performance

Graphical abstract: - Highlights: • TiO{sub 2} nanotube sensitized with CoFe{sub 2}O{sub 4} nanocrystals was synthesized by a facile hydrothermal method. • CoFe{sub 2}O{sub 4} nanocrystals were loaded to the outer and inner surface of TiO{sub 2} nanotube. • The CoFe{sub 2}O{sub 4} sensitized TiO{sub 2} nanotube electrode has a strong photoresponse to the light. - Abstract: TiO{sub 2} nanotube arrays sensitized with CoFe{sub 2}O{sub 4} nanocrystals were successfully synthesized via a facile hydrothermal method. The as-prepared sample was studied by X-ray diffraction (XRD), field emission scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDX) to characterize its phase structure, morphology and chemical composition. Enhanced absorption in both UV and visible-light regions was observed for the CoFe{sub 2}O{sub 4} sensitized TiO{sub 2} nanotube arrays. The photocurrent density of CoFe{sub 2}O{sub 4} sensitized TiO{sub 2} nanotube arrays electrode was 30 times as great as that of bare TiO{sub 2} nanotube arrays electrode.

36 MATERIALS SCIENCE↗

Retarded hydrolysis-condensing reactivity of tetrabutyl titanate by acetylacetone and the application in dye-sensitized solar cells

Graphical abstract: - Highlights: • Effect of acetone acetyl on coarsening rate of TiO{sub 2} nanocrystallites was studied. • Hydrolysis reactivity of alkoxide was retarded with addition of acetone acetyl. • Coarsening rate of TiO{sub 2} nanocrystallites is retarded with addition of acetone acetyl. • The synthesized TiO{sub 2} sols were utilized in dye sensitized solar cells. • Small particles formed by Ti-complexes were beneficial for device performance. - Abstract: TiO{sub 2} nanocrystallites have been synthesized by hydrothermal reaction using tetrabutyl titanate as source material. Acetylacetone was utilized to modify hydrolysis-condensation behavior of the alkoxide and thus coarsening dynamics of TiO{sub 2} nanocrystallites in the reaction. With assistance of Fourier transformation infrared spectrum, transmission electron microscopy, selected area electron diffraction and X-ray diffraction, interaction between acetylacetone and tetrabutyltitanate was explored, crystallographic and morphological properties of TiO{sub 2} nanocrystallites were monitored. Less hydrolysable complex was formed by “method of chelating” as tetrabutyltitanate was mixed with acetylacetone, leading to retarded coarsening rate of nanocrystallites. The obtained TiO{sub 2} nanocrystallites were applied to fabricate nanoporous photoanode of dye sensitized solar cells. Improvement of 18% has been achieved for photo-to-electric energy conversion efficiency of the devices due to both upgraded open circuit voltage and photocurrent density.

36 MATERIALS SCIENCE↗

Enhancement of photocatalytic performance of TiO{sub 2} produced by an alcohothermal approach through inclusion of water

Graphical abstract: - Highlights: • High crystallinity of TiO{sub 2} with exposed (0 0 1) facets was prepared by an alcohothermal approach through inclusion of water. • Water played an important role in conducting the size, shape, crystallinity, microstructure and photocatalytic activity of TiO{sub 2}. • High crystallinity of TiO{sub 2} could retard the recombination and promote the separation of electron–hole pairs. - Abstract: High crystallinity of TiO{sub 2} nanoparticles (NPs) with exposed (0 0 1) facets was prepared by an alcohothermal method without the addition of any specific organic reagents, in which titanium isopropoxide was used as the titania precursor, water and ethanol (0.6/90–5/90, v/v) as the reaction medium. The X-ray powder diffraction (XRD) and transmission electron microscope (TEM) measurements showed that water played an important role in conducting the size, shape, crystallinity and microstructure of TiO{sub 2} NPs. The photoluminescence spectroscopy and photocurrent measurements indicated that enhanced crystallinity could hinder effectively the recombination and promote significantly the separation of electron–hole pairs in TiO{sub 2} NPs. These will contribute to the enhancement of photocatalytic performance. Methyl orange photodegradation under UV light confirmed that high crystallinity of TiO{sub 2} NPs did exhibit a high photocatalytic activity due to the effective separation of photoinduced charges and exposure of highly reactive (0 0 1) facets.

36 MATERIALS SCIENCE↗

Indium oxide thin film as potential photoanodes for corrosion protection of stainless steel under visible light

Graphical abstract: If the conduction band potential of In{sub 2}O{sub 3} is more negative than the corrosion potential of stainless steel, photo-induced electrons will be transferred from In{sub 2}O{sub 3} to the steel, thus shifting the potential of the steel into a corrosion immunity region and preventing the steel from the corrosion. - Highlights: • Indium oxide performed novel application under visible light. • Indium oxide by sol–gel method behaved better photoelectrochemical properties. • Electrons were transferred to stainless steel from indium oxide once light on. - Abstract: This paper reports the photoelectrochemical cathodic protection of 304 stainless steel by In{sub 2}O{sub 3} thin-film under visible-light. The films were fabricated with In{sub 2}O{sub 3} powders, synthesized by both sol–gel (In{sub 2}O{sub 3}-sg) and solid-state (In{sub 2}O{sub 3}-ss) processes. The photo-induced open circuit potential and the photo-to-current efficiency measurements suggested that In{sub 2}O{sub 3} could be a promising candidate material for photoelectrochemical cathodic protection of metallic alloys under visible light. Moreover, the polarization curve experimental results indicated that In{sub 2}O{sub 3}-sg thin-film can mitigate the corrosion potential of 304 stainless steel to much more negative values with a higher photocurrent density than the In{sub 2}O{sub 3}-ss film under visible-light illumination. All the results demonstrated that the In{sub 2}O{sub 3}-sg thin-film provides a better photoelectrochemical cathodic protection for 304 stainless steel than In{sub 2}O{sub 3}-ss thin-film under visible-light illumination. The higher photoelectrochemical efficiency is possibly due to the uniform thin films produced with the smaller particle size of In{sub 2}O{sub 3}-sg, which facilitates the transfer of the photo-induced electrons from bulk to the surface and suppresses the charge recombination of the electrons and holes.

36 MATERIALS SCIENCE↗

Synthesis of Sb{sub 2}S{sub 3} nanowall arrays for high performance visible light photodetectors

Highlights: • Sb{sub 2}S{sub 3} nanowall arrays have been synthesized via a facile polyol refluxing process. • We fabricated Sb{sub 2}S{sub 3} rigid and flexible photodetectors successfully. • The photoelectric properties were studied upon visible light irradiation. • The rigid photodetector exhibit excellent photoconductive performance. - Abstract: By using a facile polyol and template-free refluxing process, we report the successful synthesis of Sb{sub 2}S{sub 3} nanowall arrays (NWAs) on the surface of FTO substrate. The as-synthesized samples were characterized by SEM, TEM, XRD and UV–vis DRS. The NWAs-based photodetector exhibits linear photocurrent characteristics, high stability, excellent reproducible properties, low LDR (linear dynamic range) value of 8.6 dB, fast response time of 0.52 s and recovery time of 1.11 s. The flexible photodetector was also fabricated by simply transferring the NWAs to a transparent PET substrate; it revealed good flexibility and stability. Our results imply that Sb{sub 2}S{sub 3} NWAs are prospective candidates for high-performance nanoscale optoelectronic devices.

36 MATERIALS SCIENCE↗

Facile formation of Ag{sub 2}WO{sub 4}/AgX (X = Cl, Br, I) hybrid nanorods with enhanced visible-light-driven photoelectrochemical properties

Highlights: • Ag{sub 2}WO{sub 4}/AgX hybrid nanorods were prepared by a facile in-situ anion exchange reaction. • Ag{sub 2}WO{sub 4} nanorods and different X{sup −} ions were reacted in water at room temperature. • The hybrids possess significantly enhanced photoelectrochemical properties. • Ag{sub 2}WO{sub 4}/AgBr hybrids exhibit the highest photocatalytic activity among three samples. • The active species tests were also investigated to confirm photocatalytic mechanism. - Abstract: In this work, we demonstrated a general strategy for the preparation of a series of uniform Ag{sub 2}WO{sub 4}/AgX (X = Cl, Br, I) hybrid nanorods by a facile in-situ anion exchange reaction occurring at room temperature between pregrown Ag{sub 2}WO{sub 4} nanorods and different X{sup −} ions in water. Compared with Ag{sub 2}WO{sub 4} nanorods, further investigation has revealed that the as-prepared hybrid nanorods possess significantly enhanced photocurrent response and photocatalytic activity in degrading methyl orange (MO) under visible-light irradiation. In particular, the Ag{sub 2}WO{sub 4}/AgBr hybrid nanorods exhibit the highest photocatalytic activity among the three kinds of samples. The active species tests indicate that superoxide anion radicals and photogenerated holes are responsible for the enhanced photocatalytic performance.

36 MATERIALS SCIENCE↗

Enhanced photoelectrochemical water splitting from Si quantum dots/TiO{sub 2} nanotube arrays composite electrodes

Graphical abstract: Si quantum dots were firstly applied to modify TiO{sub 2} nanotubes and enhanced visible light response was demonstrated for the resulted Si QDs/TiO{sub 2} nanocomposite. Si QDs are promising in photoelectrochemical water splitting and photocatalysis since their low cost, abundance and environmentally-friendliness. - Highlights: • A novel nanocomposite Si QDs/TiO{sub 2} nanotubes was fabricated and characterized. • Enhanced photoelectrochemical water splitting was firstly demonstrated for Si QDs/TiO{sub 2}. • The visible light response of TiO{sub 2} increased with the presence of Si QDs. - Abstract: This work firstly introduced Si quantum dots (QDs) to modify TiO{sub 2} nanotube arrays for photoelectrochemical water splitting. A systematic study using surface and optical characterization tools reveals the nature of the combination of Si QDs and TiO{sub 2} nanotube arrays. Scanning electron microscopy and X-ray photoelectron spectroscopy results show that Si QDs were assembled on the surface of vertically aligned TiO{sub 2} nanotube arrays. The UV–vis diffuse reflectance spectra indicate the improved visible light absorbance. The enhanced photoelectrochemical water splitting was demonstrated under visible light illumination and the photocurrent density was 1.6 times larger than that of pristine TiO{sub 2} electrodes. Electrochemical impedance behavior was measured for the electrodes and the impedance is slightly reduced for the nanocomposite electrode with the presence of Si QDs. This work demonstrated that Si QDs would be a novel and effective choice for improving the utilization of visible light for TiO{sub 2} nanotubes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Improving photoelectrochemical performance by building Fe{sub 2}O{sub 3} heterostructure on TiO{sub 2} nanorod arrays

Highlights: • Fe{sub 2}O{sub 3}@TiO{sub 2} heterostructure was fabricated by two-step method. • The photoelectrochemical properties were studied upon visible light irradiation. • Fe{sub 2}O{sub 3}@TiO{sub 2} heterostructure shows superior photoelectrochemical property. • A possible mechanism for enhanced photoelectrochemical property was put forward. - Abstract: Fe{sub 2}O{sub 3}@TiO{sub 2} heterostructure nanorod arrays were synthesized on a fluorine-doped tin oxide conductive (FTO) glass substrate via two-step method for improving photoelectrochemical activity of TiO{sub 2}. The TiO{sub 2} nanorod arrays on FTO substrate were first prepared by hydrothermal method and then Fe{sub 2}O{sub 3} nanoparticles were coated onto the surface of TiO{sub 2} nanorod arrays through chemical bath deposition. The heterojunction yielded a photocurrent density of 39.75 μA cm{sup −2} at a bias potential of 0 V (vs. Ag/AgCl) under visible light irradiation, which is 2.2 times as much as that produced by the pure TiO{sub 2} nanorod arrays. The enhanced photoelectrochemical activity is attributed to the extension of the light response range and efficient separation of photogenerated carriers. Our results have demonstrated the advantage of the novel Fe{sub 2}O{sub 3}@TiO{sub 2} heterojunction and will provide a new path to the fabrication of heterostructural materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Controlled preparation of Ag–Cu{sub 2}O nanocorncobs and their enhanced photocatalytic activity under visible light

Graphical abstract: The corncob-like Ag–Cu{sub 2}O nanostructure with suitably exposed Ag surface exhibited much higher photocatalytic activity than Ag@Cu{sub 2}O nanocables and Cu{sub 2}O nanowires. - Highlights: • Ag–Cu{sub 2}O nanocorncobs have been controllably prepared by a simple synthesis. • The possible formation mechanism of Ag–Cu{sub 2}O has been studied. • Ag–Cu{sub 2}O exhibits noticeable improved photocurrent compared with the pure Cu{sub 2}O NWs. • Ag–Cu{sub 2}O with suitably exposed Ag surface shows much higher photocatalytic activity. - Abstract: Novel corncob-like nano-heterostructured Ag–Cu{sub 2}O photocatalyst has been controllably prepared by adjusting the synthetic parameters, and the possible formation mechanism has been also studied. The photoelectrochemical and photocatalytic performances demonstrated that the as-prepared Ag–Cu{sub 2}O nanocorncobs exhibited higher photocatalytic activity than both pure Cu{sub 2}O nanowires and cable-like Ag@Cu{sub 2}O nano-composites. It was concluded that Ag–Cu{sub 2}O nanocorncobs with suitably exposed Ag surface not only effectively inhibit the recombination of electron–hole pairs but also suitably increase the active sites of electronic conduction, and thus increasing the photocatalytic activity under visible light irradiation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Hierarchical TiO{sub 2} submicron-sized spheres for enhanced power conversion efficiency in dye-sensitized solar cells

Hierarchical TiO{sub 2} submicron-sized sphere scattering layer, with relatively large surface area and effective light scattering, shows enhanced power conversion efficiency in dye-sensitized solar cells. - Highlights: • Hierarchical TiO{sub 2} submicron-sized spheres (TiO{sub 2} HSSs) with diameters of 400–600 nm were synthesized. • The HSSs composed of nanoparticles of ∼14 nm have a relatively large surface area of ∼35 m{sup 2}/g. • DSC exhibited the highest cell efficiency (6.23%) compared with ones with pure P25 (5.50%) or HSS (2.00%) photoanodes. - Abstract: Hierarchical TiO{sub 2} submicron-sized spheres (TiO{sub 2} HSSs) with diameters of 400–600 nm were synthesized by a facile one-step solvothermal method in ethanol solvent. The HSSs composed of nanoparticles of ∼14 nm have a relatively large surface area of ∼35 m{sup 2}/g. When applied as the scattering overlayer in dye-sensitized solar cells (DSCs), such TiO{sub 2} HSSs effectively improved light harvesting and led to the increase of photocurrent in DSCs. Furthermore, bilayer-structured photoanode also provided fast electron transportation and long electron lifetime as confirmed by electrochemical impedance spectra. As a result, DSC based on P25 nanoparticle underlayer and HSS-2 overlayer exhibited the highest cell efficiency (6.23%) compared with ones with pure P25 (5.50%) or HSS-2 (2.00%) photoanodes.

36 MATERIALS SCIENCE↗

Preparation of morphology-controlled TiO{sub 2} nanocrystals for the excellent photocatalytic activity under simulated solar irradiation

Graphical abstract: Morphology-controlled TiO{sub 2} nanocrystals with excellent photocatalytic activity under simulated solar irradiation were successfully synthesized. - Highlights: • TiO{sub 2} nanocrystals (NCs) with different morphologies were synthesized. • The growth mechanism of morphology-controlled TiO{sub 2} NCs was proposed. • The core-shell structured TiO{sub 2} NCs (co-TiO{sub 2}) had a narrow band gap (2.67 eV). • The co-TiO{sub 2} NCs possessed excellent photocatalytic activity and recyclability. - Abstract: A simple synthetic approach based on solvothermal technique and hydrogenation was developed for preparation of TiO{sub 2} nanocrystals with different morphologies such as elongated rhombic, dog-bone, oval and core-shell structured oval. The effect of oleic acid (OA) and oleylamine (OM) as two capping surfactants on the growth of TiO{sub 2} nanocrystals was investigated. The physicochemical properties of the obtained samples were characterized by various techniques including TEM, XRD, UV–vis absorption, Raman, XPS, BET, PL and photocurrent measurement. In photodegradation of RhB under simulated solar irradiation, the oval-shaped TiO{sub 2} nanocrystals with core-shell structure (co-TiO{sub 2}) was superior to other TiO{sub 2} nanocrystals in catalytic activity. Moreover, the co-TiO{sub 2} nanocrystals exhibited well recyclability during multiple photocatalytic tests. These excellent properties of co-TiO{sub 2} were attributed to its special structure, including lattice-disordered surface layer and well-crystallized lattice core, and narrow band gap (2.67 eV).

36 MATERIALS SCIENCE↗

One-pot electrochemical preparation of BiOCl/BiPO{sub 4} double-layer heterojunction film with efficient photocatalytic performance

Highlights: • A novel BiOCl/BiPO{sub 4} heterojunction film has been synthesized by one-pot electrochemical method. • The as-prepared BiOCl/BiPO{sub 4} heterojunction film exhibited high photocatalytic activity and stability. • The plausible formation process of BiOCl/BiPO{sub 4} heterojunction film has been proposed and demonstrated. • The photocatalytic mechanism of phenol degradation presented by BiOCl/BiPO{sub 4} heterojunction film was investigated and analyzed. - Abstract: A BiOCl/BiPO{sub 4} double-layer heterojunction film on metal Bi plate with reduced recombination of photo-induced carriers has been successfully prepared by one-step electrochemical anodization process. The morphology characterizations displayed that the double-layer film consisted of BiPO{sub 4} rods array at the bottom and BiOCl nanosheets on the top. Meanwhile, the control experiments indicated that the BiPO{sub 4} rods array was transformed by BiOCl rather than Bi{sup 3+} reacting with PO{sub 4}{sup 3−} directly. In addition, the resulting BiOCl/BiPO{sub 4} heterojunction film exhibited excellent photocatalytic activity and stability on the degradation of phenol comparing with pure BiOCl film. Transient photocurrent measurements and PL spectra proved that the enhanced photocatalytic performance of BiOCl/BiPO{sub 4} heterojunction film was attributed to the effective separation of photo-generated electron-hole pairs excited on BiOCl. Moreover, ·O{sub 2}{sup −} and ·OH played a crucial role in the photodegradation process of phenol. Based on these analytical results, a plausible photocatalytic mechanism has been proposed.

36 MATERIALS SCIENCE↗

A facile microwave-hydrothermal method to fabricate B doped ZnWO{sub 4} nanorods with high crystalline and highly efficient photocatalytic activity

Highlights: • High-crystallized B/ZnWO{sub 4} nanorods were fabricated via a fast microwave -hydrothermal method. • B doping effectively decreases particle size and increase in specific surface area. • The seperation of photogenerated e{sup −} and h{sup +} was largely promoted by B doping. • B/ZnWO{sub 4} exhibit super photocatalytic activity in degradation organic dyes. - Abstract: A series length of 50∼200 nm B doped ZnWO{sub 4} nanorods with high crystallinity were fabricated via a fast microwave-hydrothermal method. The effects of B doping on the physical properties of ZnWO{sub 4} nanorods were intensively characterized by N{sub 2} physical adsorption, XRD, TEM, FT-IR, XPS, ultraviolet-visible diffuse reflection spectrum (UV–vis DRS), photolunminescence spectrum (PL), transient photocurrent response (TPR). The results indicated that the doped B could replace the lattice tungsten ion in ZnWO{sub 4} crystals, which caused the lattice spacing contraction, particle size decrease, specific surface area increase. More importantly, the separation of the photogenerated electrons and holes in ZnWO{sub 4} was significantly enhanced by B doping. With doped optimum B concentration (2.42 wt%), B/ZnWO{sub 4} displayed super photocatalytic performance in dyes decomposition. The degradation rate constant (0.065 h{sup −1}) of Rhodamine B over B (2.42 wt%)/ZnWO{sub 4} is 4 times of that over ZnWO{sub 4} (0.016 h{sup −1}).

36 MATERIALS SCIENCE↗