SEARCH · Engineering Papers

Results for “Phased Arrays”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

All sources NASA NTRS DOE OSTI

NASA NTRS1992

Pseudomorphic Single-Quantum-Well Lasers Emit At 980 Nm

Narrow-stripe semiconductor lasers emitting at 980 nm include pseudomorphic In0.2Ga0.8As/GaAs/AlxGa1-xAs graded-index-of-refraction, separate-confinement-heterostructure single quantum well(GRINSCH SQW) with overlaid ridge waveguide. 980 nm chosen as one that yields most efficient pumping because there is no absorption in excited states at this wavelength. Suitable for pumping Er(Sup3+)-doped optical-fiber amplifiers in optical-fiber communication systems and optical phased-array ranging systems.

Larsson, Anders↗

NASA NTRS1991

Microwave sensing technology issues related to a global change technology architecture trade study

The objectives are to enable the development of lighter and less power consuming, high resolution microwave sensors which will operate at frequencies from 1 to 200 GHz. These systems will use large aperture antenna systems (both reflector and phased arrays) capable of wide scan angle, high polarization purity, and utilize sidelobe suppression techniques as required. Essentially, the success of this technology program will enable high resolution microwave radiometers from geostationary orbit, lightweight and more efficient radar systems from low Earth orbit, and eliminate mechanical scanning methods to the fullest extent possible; a main source of platform instability in large space systems. The Global Change Technology Initiative (GCTI) will develop technology which will enable the use of satellite systems for Earth observations on a global scale.

Campbell, Thomas G.↗

NASA NTRS1991

The Air Force Manufacturing Technology (MANTECH): Technology transfer methodology as exemplified by the radar transmit/receive module program

The Air Force Manufacturing Technology program is involved with the improvement of radar transmit/receive modules for use in active phased array radars for advanced fighter aircraft. Improvements in all areas of manufacture and test of these modules resulting in order of magnitude improvements in the cost of and the rate of production are addressed, as well as the ongoing transfer of this technology to the Navy.

Houpt, Tracy↗

NASA NTRS1991

Solid State Technology Branch of NASA Lewis Research Center

Reprints of one year's production of research publications (June 1990 to June 1991) are presented. These are organized into three major sections: microwave circuits, both hybrid and monolithic microwave integrated circuits (MMICs); materials and device work; and superconductivity. The included papers also cover more specific topics involving waveguides, phase array antennas, dielectrics, and high temperature superconductors.

Source record↗

NASA NTRS1990

A high gain antenna system for airborne satellite communication applications

A high gain antenna for commercial aviation satellites communication is discussed. Electromagnetic and practical design considerations as well as candidate systems implementation are presented. An evaluation of these implementation schemes is given, resulting in the selection of a simple top mounted aerodynamic phased array antenna with a remotely located beam steering unit. This concept has been developed into a popular product known as the Canadian Marconi Company CMA-2100. A description of the technical details is followed by a summary of results from the first production antennas.

Maritan, M.↗

NASA NTRS1991

The Earth Observing System Synthetic Aperture Radar (EOS SAR) mission

The EOS SAR mission under consideration as one element of the mission to planet earth, which will provide a long duration radar observing system with multipolarization and multifrequency capability, is presented. The payload consists of three synthetic aperture radar systems; a C-band radar with dual polarization, an L-band radar with quadruple polarization, and an X-band radar with dual polarization. Each radar system will be of the phased-array type, will have variable resolutions and swath widths and will be capable of steering the beam electronically in elevation.

Wellman, John B.↗

NASA NTRS1992

User services in the TDRS II era

The next generation Tracking and Data Relay Satellite System (TDRS II) will provide a new level of telemetry, tracking and command services to user spacecraft. In addition to the S-band and Ku-band services, which have made the Space Network concept a reality, a new multifrequency dual-polarization high data rate Ka-band service will also be provided. The S-band multiple-access system will have a larger number of phased array elements, on-board beam forming, and a receive capability equivalent to a single-access antenna. A multifunctional intersatellite link, capable of relaying between TDRS IIs and providing an additional single-access service, is also planned. Enhancements, which include an improved location capability for both the TDRS II and user satellite, a navigation beacon, and a real-time emergency command capability will also be part of the TDRS II. The TDRS II will be three-axis stabilized sufficiently to provide these services to users either on the ground, in low earth orbit, or out to geosynchronous orbit.

Comberiate, Anthony B.↗

NASA NTRS1992

High-performance packaging for monolithic microwave and millimeter-wave integrated circuits

Packaging schemes are developed that provide low-loss, hermetic enclosure for enhanced monolithic microwave and millimeter-wave integrated circuits. These package schemes are based on a fused quartz substrate material offering improved RF performance through 44 GHz. The small size and weight of the packages make them useful for a number of applications, including phased array antenna systems. As part of the packaging effort, a test fixture was developed to interface the single chip packages to conventional laboratory instrumentation for characterization of the packaged devices.

Shalkhauser, K. A.↗

NASA NTRS1992

A high temperature superconductivity communications flight experiment

The proposed high temperature superconductivity (HTSC) millimeter-wave communications flight experiment from the payload bay of the Space Shuttle Orbiter to the Advanced Communications Technology Satellite (ACTS) in geosynchronous orbit is described. The experiment will use a Ka-band HTSC phased array antenna and front-end electronics to receive a downlink communications signal from the ACTS. The discussion covers the system configuration, a description of the ground equipment, the spacecraft receiver, link performance, thermal loading, and the superconducting antenna array.

Ngo, P.↗

NASA NTRS1993

High-Temperature-Superconductor Films In Microwave Circuits

Report discusses recent developments in continuing research on fabrication and characterization of thin films of high-temperature superconducting material and incorporation of such films into microwave circuits. Research motivated by prospect of exploiting superconductivity to reduce electrical losses and thereby enhancing performance of such critical microwave components as ring resonators, filters, transmission lines, phase shifters, and feed lines in phased-array antennas.

Bhasin, K. B.↗

NASA NTRS1992

HARDI: A high angular resolution deployable interferometer for space

We describe here a proposed orbiting interferometer covering the UV, visible, and near-IR spectral ranges. With a 6-m baseline and a collecting area equivalent to about a 1.4 m diameter full aperture, this instrument will offer significant improvements in resolution over the Hubble Space Telescope, and complement the new generation of ground-based interferometers with much better limiting magnitude and spectral coverage. On the other hand, it has been designed as a considerably less ambitious project (one launch) than other current proposals. We believe that this concept is feasible given current technological capabilities, yet would serve to prove the concepts necessary for the much larger systems that must eventually be flown. The interferometer is of the Fizeau type. It therefore has a much larger field (for guiding) better UV throughout (only 4 surfaces) than phased arrays. Optimize aperture configurations and ideas for the cophasing and coalignment system are presented. The interferometer would be placed in a geosynchronous or sunsynchronous orbit to minimize thermal and mechanical disturbances and to maximize observing efficiency.

Bely, Pierre Y.↗

NASA NTRS1993

Microwave characterization of slotline on high resistivity silicon for antenna feed network

Conventional silicon wafers have low resistivity and consequently unacceptably high value of dielectric attenuation constant. Microwave circuits for phased array antenna systems fabricated on these wafers therefore have low efficiency. By choosing a silicon substrate with sufficiently high resistivity it is possible to make the dielectric attenuation constant of the interconnecting microwave transmission lines approach those of GaAs or InP. In order for this to be possible, the transmission lines must be characterized. In this presentation, the effective dielectric constant (epsilon sub eff) and attenuation constant (alpha) of a slotline on high resistivity (5000 to 10 000 ohm-cm) silicon wafer will be discussed. The epsilon sub eff and alpha are determined from the measured resonant frequencies and the corresponding insertion loss of a slotline ring resonator. The results for slotline will be compared with microstrip line and coplanar waveguide.

Simons, Rainee N.↗

NASA NTRS1993

System overview on electromagnetic compensation for reflector antenna surface distortion

The system requirements and hardware implementation for electromagnetic compensation of antenna performance degradations due to thermal effects was investigated. Future commercial space communication antenna systems will utilize the 20/30 GHz frequency spectrum and support very narrow multiple beams (0.3 deg) over wide angle field of view (15-20 beamwidth). On the ground, portable and inexpensive very small aperture terminals (VSAT) for transmitting and receiving video, facsimile and data will be employed. These types of communication system puts a very stringent requirement on spacecraft antenna beam pointing stability (less than .01 deg), high gain (greater than 50 dB) and very lowside lobes (less than -25 dB). Thermal analysis performed on the advanced communication technology satellite (ACTS) has shown that the reflector surfaces, the mechanical supporting structures and metallic surfaces on the spacecraft body will distort due thermal effects from a varying solar flux. The antenna performance characteristics (e.g., pointing stability, gain, side lobe, etc.) will degrade due to thermal distortion in the reflector surface and supporting structures. Specifically, antenna RF radiation analysis has shown that pointing error is the most sensitive antenna performance parameter to thermal distortions. Other antenna parameters like peak gain, cross polarization level (beam isolation), and side lobe level will also degrade with thermal distortions. In order to restore pointing stability and in general antenna performance several compensation methods were proposed. In general these compensation methods can be classified as being either of mechanical or electromagnetic type. This paper will address only the later one. In this approach an adaptive phased array antenna feed is used to compensate for the antenna performance degradation. Extensive work has been devoted to demonstrate the feasibility of adaptive feed compensation on space communication antenna systems. This paper addresses the system requirements for such a system and identify candidate technologies (analog and digital) for possible hardware implementation.

Acosta, R. J.↗

NASA NTRS1991

Mixed application MMIC technologies - Progress in combining RF, digital and photonic circuits

Approaches for future 'mixed application' monolithic integrated circuits (ICs) employing optical receive/transmit, RF amplification and modulation and digital control functions are discussed. We focus on compatibility of the photonic component fabrication with conventional RF and digital IC technologies. Recent progress at Honeywell in integrating several parts of the desired RF/digital/photonic circuit integration suite required for construction of a future millimeter-wave optically-controlled phased-array element are illustrated.

Swirhun, S.↗

NASA NTRS1991

Application of Ka-band MMIC technology for an orbiter/ACTS communications experiment

A proposed Ka-band communications experiment between the Shuttle Orbiter and the Advanced Communications Technology Satellite (ACTS) is described. Monolithic Microwave Integrated Circuit (MMIC) technology is used in both the Orbiter and on the ground. A 25 dB gain circularly polarized phased array transmits low-bit-rate television to ground stations at the Johnson Space Center and the Lewis Research Center.

Arndt, Dickey↗

NASA NTRS1991

Space-based millimeter-wave debris tracking radar

NORAD system currently tracks and predicts orbits of space objects of 80 mm or larger in diameter. The small debris of less than 80 mm, traveling at high speed, could cause damage to Space Station or space vehicles. To overcome this problem, a 35 GHz space-based millimeter-wave radar system is proposed to track the particles ranging in size from 4 mm to 80 mm up to a range of 25 Km. The system requires a large phased array which should be developed in monolithic circuits for cost reduction.

Chang, Kai↗

NASA NTRS1992

Telescopes for a lunar outpost

This paper presents an overview of lunar-based telescopes. It begins with a review of the impressive attributes of the moon for astronomy which include a hard vacuum, seismic stability, low gravitational field, large surface area, dark and radio-quiet skies on the far-side, cold craters at the poles, and an abundance of raw materials. These attributes, coupled with the availability of technicians at a lunar outpost, make the moon the most attractive site for the next generation of space-based observatories. It is argued that modest, light-weight instruments such a generic 1-m optical/UV/IR telescope and a low radio frequency phased array are well suited for early deployment on the moon. More advanced concepts such as a 16-m filled aperture telescope and an optical interferometer will make unprecedented strides in sensitivity and resolution. Although complex, such telescopes are well-suited to an evolutionary construction and deployment scheme.

Burns, Jack O.↗

NASA NTRS1992

Low frequency astronomy from lunar orbit

As part of preparation for establishing a permanently manned lunar outpost, a plan is proposed whereby relatively simple phased arrays of dipoles will be placed on individual lunar satellites to perform interferometry between the spacecraft. The dipole arrays will be deployed as inflatable structures. The experiment will function at 13 and 26 MHz. For a scenario in which two spacecraft are in perpendicular lunar polar orbits at altitudes of 100 km, the useful physical baselines will range from about 1 to about 1500 km. With a mission lifetime of one year, the two-element interferometer will produce synthetic aperture imaging with a resolution of about 2 arcsec.

Basart, John P.↗