Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Phase Stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Influence of aluminum source and Ni/Al ratio in a batch stirred tank reactor on the structure, morphology, and electrochemical performance of Ni-rich NMA cathodes

Here, the structural, morphological, and electrochemical performance of Ni-rich LiNi 0.9 Mn 0.05 Al 0.05 O 2 (955NMA) and LiNi 0.85 Mn 0.05 Al 0.1 O 2 (85,510) cathodes strongly depends on the properties of their hydroxide precursors. Ni-Mn-Al hydroxide precursors were synthesized through controlled co-precipitation in a batch stirred tank reactor, where pH, reaction time, metal-ion feed rate, aluminum source, and aluminum concentration were systematically varied to tailor particle morphology, phase composition, and dopant distribution. Two aluminum sources, aluminum nitrate and sodium aluminate produced two distinct hydroxide precursors NMA(OH) 2 -1 and NMA(OH) 2 -2, which were lithiated to form LiNMA1 (Li 0.992 [Ni 0.905 Mn 0.049 Al 0.046 ]O 2 ) and LiNMA2 (Li 0.990 [Ni 0.850 Mn 0.047 Al 0.103 ]O 2 ). Structural and compositional analyses revealed that aluminum incorporation and phase formation in Ni–Mn–Al hydroxides are governed by local supersaturation and interfacial growth kinetics. Rapid dilute aluminum addition produced aluminum-free β-phase hydroxides, intermediate conditions generated mixed α/β phases, whereas slow concentrated dosing enabled uniform aluminum incorporation and stabilization of the β-phase structure. LiNMA1 delivers a high initial discharge capacity of 223 mAhg −1 but significant capacity fading with 67% retention after 100 cycles, associated with structural instability. In contrast, LiNMA2 delivers a lower initial capacity 172 mAhg −1 yet excellent cycling stability 91% retention, attributed to improved TM–O framework stability and reduced cation disorder.

Capacity↗
DOE OSTI2024

Reversible hydrogen storage in multilayer graphane: Lattice dynamics, compressibility, and heat capacity studies

Multilayer graphane (hydride of graphite) is a crystalline hydrocarbon of composition CH, which can be synthesized from graphite and molecular hydrogen at pressures above 2GPa [V.E. Antonov et al. Carbon 100 (2016) 465]. Using X-ray diffraction, this compound was tentatively identified as the “graphane II” phase of 3D-graphane predicted by ab initio calculations [X.-D. Wen et al. PNAS 108 (2011) 6833] and consisting of layers of 2D-graphane in the “chair” conformation. When heated in a vacuum, the compound does not form any intermediate hydrocarbons and reversibly decomposes back into graphite and hydrogen at 770–920 K. In the present work, almost single-phase samples of graphite hydride and deuteride were synthesized at 7.4 GPa and 870 K. Their investigation by inelastic neutron scattering supplemented by ab initio calculations gave spectra g(E) of the phonon density of states with a gap of about 15 meV at approx. 100 meV, which is a unique identifier for the chair form of graphane. The equation of state V(P) of the hydride was studied at room temperature and hydrogen pressures up to 53 GPa by synchrotron X-ray diffraction in a diamond anvil cell. Further, the graphane II phase did not react with the surrounding hydrogen and did not undergo any phase transformations upon the compression and after heating to 1500 K at 53GPa. The high thermal and pressure stability of this exotic phase makes it an important part of the C–H system. The obtained g(E) spectra of graphite hydride and deuteride were used to calculate temperature dependences of their heat capacity. Measurements of the heat capacity at temperatures 120–673 K confirmed the good accuracy of these calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Role of Oxygen on Chemical Segregation in Uncapped Ge 2 Sb 2 Te 5 Thin Films on Silicon Nitride

Germanium antimony telluride has been the most used and studied phase-change material for electronic memory due to its suitable crystallization temperature, amorphous to crystalline resistance contrast, and stability of the amorphous phase. In this paper, the segregation of Ge in a Ge 2 Sb 2 Te 5 film of 30 nm thickness during heating inside the transmission electron microscope was observed and characterized. Furthermore, Ge 2 Sb 2 Te 5 film was deposited using sputtering on a Protochips Fusion holder and left uncapped in atmosphere for about four months. Oxygen incorporated within the film played a significant role in the chemical segregation observed which resulted in amorphous Ge-O island boundaries and Sb and Te rich crystalline domains. Such composition changes can occur when the phase-change material interfaces insulating oxide layers in an integrated device and can significantly impact its electrical and thermal properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Improved Control Strategy of Grid-Forming Inverters for Fault Ride-Through in a Microgrid System: Preprint

This paper develops improved control strategy of GFM inverter with fault ride-through (FRT) capabilities to guarantee stable operation of microgrid under fault conditions especially islanded microgrid and asymmetrical faults. The proposed control strategy includes dual control of positive-sequence and negative-sequence control, and the adaptive virtual impedance (VI) control. Unlike the existing works, the proposed strategy only applies the VI control for the d-component of the positive-sequence control and leaves the q-component of positive-sequence control and dq-component of negative-sequence control zero, thus achieving the improved stability and balanced three-phase voltage under asymmetrical faults. The adaptive feature of the VI control guarantees the stability of the GFM inverter under severe faults which could cause saturated inner current loop and instability if the VI is not adaptive. Simulation results of a phase-to-phase-ground fault show that the proposed control strategy improves the stability of GFM and achieves the stable and balanced output voltages in islanded microgrid.

fault ride-through↗
DOE OSTI2024

Effect of Si impurities on microstructure and tensile properties of a cast Al-Mg-Fe alloy

Al-Mg alloys are attractive for structural castings owing to their superior strength and ductility in the as-cast state. However, given the tight tolerance for impurities, Al-Mg alloys produced from secondary sources still face multiple challenges. Here, we report the effect of increased Si impurity (0.05–1.6 wt%), which is commonly found in secondary Al sources, on microstructure and tensile properties of a cast Al-4.3Mg-1.6Fe (wt%) alloy, commercially referred to as Castaduct-42 alloy. Microstructural characterization revealed that Si addition increased the volume fraction, size, and aspect ratio of primary Al13Fe4 intermetallic particles as well as the volume fraction of other binary and ternary eutectic phases. Tensile testing results demonstrated that increasing Si impurities from 0.05 to 1.6 wt% reduced ductility from 14.3 ± 1.4 % to 2.2 ± 1.0 %. A particle cracking damage accumulation model coupled with failure analysis indicated primary Al13Fe4 intermetallic particles to be the major contributing factor to the deterioration in ductility with increasing Si content. Additionally, the stabilizing effect of Si on primary Al 13 Fe 4 was inconsistent with the CALPHAD calculation results based on existing CALPHAD databases which predict a slightly decreasing primary Al13Fe4 phase fraction with increasing Si concentration. This work provides new insights into the phase stability and mechanical behavior of the lesser studied Al-Mg-Fe-Si alloy system that will contribute to the development of sustainable cast Al-Mg based alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Strain effects on stability of topological ferroelectric polar configurations in (PbTiO3) n /(SrTiO3) n superlattices

The (PbTiO3)n/(SrTiO3)n (PTO/STO) superlattice system has been shown to exhibit interesting topological phases (e.g., vortices and skyrmions) in addition to normal ferroelectric domain states. Existing studies are mostly focused on the dependence of topological polar distributions and properties of PTO/STO superlattice on its periodicity. Here, we study the strain effect on the topological phase transitions and ferroelectric domain structures employing phase-field simulations. We summarized in an isotropic strain (in-plane misfit strain along the x direction is equal to that along the y direction) periodicity phase diagram displaying the stability regions of different polar topological states, including normal ferroelectric twins, vortices, skyrmions, and mixtures of vortices and twins. We also analyzed the polarization configurations under anisotropic in-plane strains (in-plane misfit strain along the x direction is not equal to that along the y direction) and demonstrated that the strain anisotropy can be used to tune the directions of vortex arrays along either the [100] pc or [010] pc directions or labyrinth vortex arrays. This work offers guidance to manipulating polar structures in the PTO/STO superlattices via strain engineering.

Physics↗
DOE OSTI2021

Tunable Nanoscale Evolution and Topological Phase Transitions of a Polar Vortex Supercrystal

Here, understanding the phase transitions and domain evolutions of mesoscale topological structures in ferroic materials is critical to realizing their potential applications in next-generation high-performance storage devices. Here, the behaviors of a mesoscale supercrystal are studied with 3D nanoscale periodicity and rotational topology phases in a PbTiO 3 /SrTiO 3 (PTO/STO) superlattice under thermal and electrical stimuli using a combination of phase-field simulations and X-ray diffraction experiments. A phase diagram of temperature versus polar state is constructed, showing the formation of the supercrystal from a mixed vortex and α-twin state and a temperature-dependent erasing process of a supercrystal returning to a classical α-twin structure. Under an in-plane electric field bias at room temperature, the vortex topology of the supercrystal irreversibly transforms to a new type of stripe-like supercrystal. Under an out-of-plane electric field, the vortices inside the supercrystal undergo a topological phase transition to polar skyrmions. These results demonstrate the potential for the on-demand manipulation of polar topology and transformations in supercrystals using electric fields. The findings provide a theoretical understanding that may be utilized to guide the design and control of mesoscale polar structures and to explore novel polar structures in other systems and their topological nature.

P=phase-field simulations↗
DOE OSTI2021

Universal phase dynamics in VO 2 switches revealed by ultrafast operando diffraction

Understanding the pathways and time scales underlying electrically driven insulator-metal transitions is crucial for uncovering the fundamental limits of device operation. Using stroboscopic electron diffraction, we perform synchronized time-resolved measurements of atomic motions and electronic transport in operating vanadium dioxide (VO 2 ) switches. We discover an electrically triggered, isostructural state that forms transiently on microsecond time scales, which is shown by phase-field simulations to be stabilized by local heterogeneities and interfacial interactions between the equilibrium phases. This metastable phase is similar to that formed under photoexcitation within picoseconds, suggesting a universal transformation pathway. Our results establish electrical excitation as a route for uncovering nonequilibrium and metastable phases in correlated materials, opening avenues for engineering dynamical behavior in nanoelectronics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Phase evolution during lithium–indium halide superionic conductor dehydration

Select rare-earth alkali halides have demonstrated high lithium ion conductivity. The conductivity appears to be related to the stability of the crystal phase, ordering of the lithium sublattice and the amount of residual H 2 O. Li 3 InCl 6 can be synthesized from concentrated aqueous solution through controlled dehydration. In this work, we track Li 3 InCl 6 dehydration using a multimodal approach that combines thermogravimetric, spectroscopic, X-ray diffraction, and neutron scattering techniques. In situ X-ray diffraction suggests a single phase transition caused by dehydration, in disagreement with spectroscopic and thermodynamic measurements. Neutron scattering, being sensitive toward the H 2 O and Li sublattices, reveals multiple phase transitions. We show that the loss of the final trace H 2 O leads to strain and grain boundary formation. Thus, controlled dehydration may be a viable strategy for high-throughput processing for roll-to-roll manufacturing of REAH solid electrolytes.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Emergent long-range magnetic order in ultrathin (111)-oriented LaNiO3 films

Abstract The emergence of ferromagnetism in materials where the bulk phase does not show any magnetic order demonstrates that atomically precise films can stabilize distinct ground states and expands the phase space for the discovery of materials. Here, the emergence of long-range magnetic order is reported in ultrathin (111) LaNiO 3 (LNO) films, where bulk LNO is paramagnetic, and the origins of this phase are explained. Transport and structural studies of LNO(111) films indicate that NiO 6 octahedral distortions stabilize a magnetic insulating phase at the film/substrate interface and result in a thickness-dependent metal–insulator transition at t = 8 unit cells. Away from this interface, distortions relax and bulk-like conduction is regained. Synchrotron x-ray diffraction and dynamical x-ray diffraction simulations confirm a corresponding out-of-plane unit-cell expansion at the interface of all films. X-ray absorption spectroscopy reveals that distortion stabilizes an increased concentration of Ni 2+ ions. Evidence of long-range magnetic order is found in anomalous Hall effect and magnetoresistance measurements, likely due to ferromagnetic superexchange interactions among Ni 2+ –Ni 3+ ions. Together, these results indicate that long-range magnetic ordering and metallicity in LNO(111) films emerges from a balance among the spin, charge, lattice, and orbital degrees of freedom.

36 MATERIALS SCIENCE↗
DOE OSTI2021

High-Entropy 2D Carbide MXenes: TiVNbMoC 3 and TiVCrMoC 3

Two-dimensional (2D) transition metal carbides and nitrides, known as MXenes, are a fast-growing family of 2D materials. MXenes 2D flakes have n + 1 (n = 1-4) atomic layers of transition metals interleaved by carbon/nitrogen layers, but to-date remain limited in composition to one or two transition metals. In this study, by implementing four transition metals, we report the synthesis of multi-principal-element high-entropy M 4 C 3 T x MXenes. Specifically, we introduce two high-entropy MXenes, TiVNbMoC 3 T x and TiVCrMoC 3 T x , as well as their precursor TiVNbMoAlC 3 and TiVCrMoAlC 3 high-entropy MAX phases. We used a combination of real and reciprocal space characterization (X-ray diffraction, X-ray photoelectron spectroscopy, energy dispersive X-ray spectroscopy, and scanning transmission electron microscopy) to establish the structure, phase purity, and equimolar distribution of the four transition metals in high-entropy MAX and MXene phases. We use first-principles calculations to compute the formation energies and explore synthesizability of these high-entropy MAX phases. We also show that when three transition metals are used instead of four, under similar synthesis conditions to those of the four-transition-metal MAX phase, two different MAX phases can be formed (i.e., no pure single-phase forms). This finding indicates the importance of configurational entropy in stabilizing the desired single-phase high-entropy MAX over multiphases of MAX, which is essential for the synthesis of phase-pure high-entropy MXenes. The synthesis of high-entropy MXenes significantly expands the compositional variety of the MXene family to further tune their properties, including electronic, magnetic, electrochemical, catalytic, high temperature stability, and mechanical behavior.

2D materials↗
DOE OSTI2024

Crystallographic map: A general lattice and basis formalism enabling efficient and discretized exploration of crystallographic phase space

Three-dimensional lattices are fundamental to solid-state physics. The description of a lattice with an atomic basis constitutes the necessary information to predict solid phase properties and evolution. Here, we present an algorithm for systematically exploring crystallographic phase space. Further, coupled with ab initio techniques, such as density functional theory, this algorithm offers an approach for exploring and tuning materials behavior, with a broad range of potential applications: particularly martensitic phase transformations and materials stability.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A Compact, Single Stage, >1 kV Medium-Voltage Line Impedance Stabilization Network

This paper presents the design of a single-phase, single-stage line impedance stabilization network (LISN) for medium-voltage (MV) applications. More than 1 kV rated widebandgap (WBG) power semiconductor switches are increasingly utilized in new, emerging power electronics energy systems to improve power density and efficiency. However, due to inherently fast-switching speeds, WBG switch modules emit considerable electromagnetic interference (EMI) (e.g., common mode (CM) or differential mode (DM)). State-of-the-art offers standardized LISN solutions to validate and certify the new energy system for electromagnetic compatibility (EMC). However, most are for low voltage applications (i.e., < 1 kV). MV LISNs (i.e., > 1 kV) are rare until recently and literature does not provide sufficient guidelines for designing and characterizing such devices. It has been a critical challenge for many scientists and engineers to reliably certify the emerging MV energy systems (e.g., electric ships and aircraft). This paper addresses such a technology gap. Specifically, a CISPR 16-1-2 compliant 50Ω/50μH LISN with 1.5kV, 75A and 30MHz measurement capability has been proposed. Detailed performance study versus non-linear parasitic parameters variations in MV inductors and capacitors have been done. Based on new understandings, novel techniques to intuitively mitigate unwanted parasitic have been proposed to develop the proposed LISN successfully. Thorough characterization of important LISN parameters are presented and factors influencing them are analyzed. A rigorous analysis, experimental tests, and in-depth comparisons over state-of-the-art have been made to validate the effectiveness. This is done through the state-of-the-art 300kVA MV EMI testbed.

42 ENGINEERING↗
DOE OSTI2020

Spinodal electronic phase separation during insulator-metal transitions

Electronic phase transitions such as insulator-metal transitions are common in strongly correlated systems. Here, using a combination of thermodynamic linear-stability analysis and phase-field simulations and employing VO 2 as a prototypical example, we predict that an insulator-metal transition driven by photoexcitation may involve an intermediate, modulated charge density state with a temperature-dependent characteristic wavelength. It is shown that such an intermediate two-phase electronic state is formed through a spinodal mechanism and that its formation can be generic for insulator-metal transitions driven by fast stimuli. This transient electronic phase separation is expected to stimulate future experimental and computational efforts.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A map of single-phase high-entropy alloys

High-entropy alloys have exhibited unusual materials properties. The stability of equimolar single-phase solid solution of five or more elements is supposedly rare and identifying the existence of such alloys has been challenging because of the vast chemical space of possible combinations. Herein, based on high-throughput density-functional theory calculations, we construct a chemical map of single-phase equimolar high-entropy alloys by investigating over 658,000 equimolar quinary alloys through a binary regular solid-solution model. We identify 30,201 potential single-phase equimolar alloys (5% of the possible combinations) forming mainly in body-centered cubic structures. We unveil the chemistries that are likely to form high-entropy alloys, and identify the complex interplay among mixing enthalpy, intermetallics formation, and melting point that drives the formation of these solid solutions. We demonstrate the power of our method by predicting the existence of two new high-entropy alloys, i.e. the body-centered cubic AlCoMnNiV and the face-centered cubic CoFeMnNiZn, which are successfully synthesized.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Polymer Stabilized Paraboloid Liquid Crystal Microlenses with Integrated Pancharatnam–Berry Phase

Aspheric lenses reduce aberration and provide sharper images with improved spot size compared to spherical lenses. Here this paper demonstrates that applying shear flow can produce plano-concave liquid crystal (LC) lens arrays with paraboloid aspheric profiles. The focal length of individual lenses, with a 0.2 mm aperture, decreases from 0.67 to 0.45 mm as the chiral dopant increases from 0 to 6 wt%. The focal length is also sensitive to the polarization state of the incoming light. The lenses are stabilized by photopolymerizing with 6 wt% of reactive monomer added to the LC. A qualitative explanation for the flow-induced lens formation and the optical properties of the lenses is provided. The potential tunability of the lenses in various fields and their use as paraboloid reflectors are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Equation of State and Spin Crossover of (Al, Fe)–Phase H

The transport of hydrogen into Earth's deep interior may have an impact on lower mantle dynamics as well as on the seismic signature of subducted material. Due to the stability of the hydrous phases δ-AlOOH (delta phase), MgSiO 2 (OH) 2 (phase H), and ε-FeOOH at high temperatures and pressures, their solid solutions may transport significant amounts of hydrogen as deep as the core-mantle boundary. Here we have constrained the equation of state, including the effects of a spin crossover in the Fe 3+ atoms, of (Al, Fe)-phase H: Al 0.84 Fe 3+ 0.07 Mg 0.02 Si 0.06 OOH, using powder X-ray diffraction measurements to 125 GPa, supported by synchrotron Mössbauer spectroscopy measurements on (Al, Fe)-phase H and δ-(Al, Fe)OOH. The changes in spin state of Fe 3+ in (Al, Fe)-phase H results in a significant decrease in bulk sound velocity and occurs over a different pressure range (48–62 GPa) compared with δ-(Al, Fe)OOH (32–40 GPa). Changes in axial compressibilities indicate a decrease in the compressibility of hydrogen bonds in (Al, Fe)-phase H near 30 GPa, which may be associated with hydrogen bond symmetrization. The formation of (Al, Fe)-phase H in subducted oceanic crust may contribute to scattering of seismic waves in the mid-lower mantle (~1,100–1,550 km). Accumulation of 1–4 wt.% (Al, Fe)-phase H could reproduce some of the seismic signatures of large, low seismic-velocity provinces. Our results suggest that changes in the electronic structure of phases in the (δ-AlOOH)-(MgSiO 2 (OH) 2 )-(ε-FeOOH) solid solution are sensitive to composition and that the presence of these phases in subducted oceanic crust could be seismically detectable throughout the lower mantle.

58 GEOSCIENCES↗
DOE OSTI2025

Charge Regulation Stabilizes the Formation of Ionic Liquid‐Based Amphiphilic Oligomer Droplet Interface Bilayers

Amphiphilic charged oligomers (oligodimethylsiloxane – methylimidazolium cation, ODMS-MIM (+) ), assemble into bilayers using the droplet interface bilayer (DIB) platform, possess similar size and functionality as phospholipid bilayers, but exhibit increased stability. The oligomer ionic headgroups (MIM (+) ) are covalently bound to monodisperse, short-chain (n = 13) hydrophobic tails (ODMS). These self-assemble as monolayer brushes at the oil–aqueous interface of water droplets that are influenced by both the charged cationic headgroups, and the nature of the covalently attached tails in the organic phase. Charge regulation (CR) stabilizes the formation of ordered, molecularly close-packed brush phases, which results in highly insulating, stable DIB membranes, with contributions from specific ion-pairing effects, Debye screening, and voltage-dependent electrocompressive stresses. In the oil phase, interactions between hexadecane, a good solvent for ODMS, and the hydrophobic tails result in extended waiting times for bilayer formation compared to phospholipid DIBs, for which hexadecane is a poor solvent. Close agreement between experimental values and predictions for two key parameters, the critical membrane thickness, h c , and maximal grafted headgroup density, Γ 0 , validate an electrostatic CR model consisting of adsorption and partial neutralization of counterions at a charged interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗