Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Particles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Characterization of individual particles in gaseous media by mass spectrometry

An introduction is given to a system for particle analysis by mass spectrometry (PAMS) which employs particle-beam techniques to measure mass spectra on a continuous real-time basis. The system is applied to particles of both organic and inorganic compounds, and the measurements give the chemical characteristics of particles in mixtures and indicate source apportionment. The PAMS system can be used for process control and studying heterogeneous/catalytic reactions in particles, and can be fitted to study the real-time attributes of PAMS.

Sinha, M. P.↗

Volatiles in interplanetary dust particles - A review

The paper presents a review of the volatiles found within interplanetary dust particles. These particles have been shown to represent primitive material from early in the solar system's formation and also may contain records of stellar processes. The organogenic elements (i.e., H, C, N, O, and S) are among the most abundant elements in our solar system, and their abundances, distributions, and isotopic compositions in early solar system materials permit workers to better understand the processes operating early in the evolutionary history of solar system materials. Interplanetary dust particles have a range of elemental compositions, but generally they have been shown to be similar to carbonaceous chondrites, the solar photosphere, Comet Halley's chondritic cores, and matrix materials of chondritic chondrites. Recovery and analysis of interplanetary dust particles have opened new opportunities for analysis of primitive materials, although interplanetary dust particles represent major challenges to the analyst because of their small size.

Gibson, Everett K., Jr.↗

The Arctic polar stratospheric cloud aerosol - Aircraft measurements of reactive nitrogen, total water, and particles

In situ aircraft measurements in the lower stratosphere are used to investigate the reactive nitrogen, NO(y), total water, and particle components of the polar stratospheric cloud (PSC) aerosol in the Arctic. The results are compared to findings from the Antarctic derived using similar measurements and interpretive techniques. The Arctic data show that particle volume well above background values is present at temperatures above the frostpoint, confirming the result from the Antarctic that the observed PSCs are not water ice particles. NO(y) measurements inside a PSC are enhanced above ambient values consistent with anisokinetic sampling of particles containing NO(y). In the Arctic data over long segments of several flights, calculations show saturation with respect to nitric acid trihydrate without significant PSC particle growth above background.

Kawa, S. R.↗

Particle simulations of driven collisionless magnetic reconnection at the dayside magnetopause

Particle simulations (including both ions and electrons) of the driven collisionless magnetic reconnection process at the earth's dayside magnetopause were carried out using a specially developed two-and-one-half-dimensional electromagnetic particle code with a driven inflow boundary and an open outflow boundary. The simulations were used to examine many features associated with the dayside magnetic reconnection process, including the acceleration and heating of particles and the generation of energetic particles and particle heat flux. In addition, the fluctuating electromagnetic field associated with a driven collisionless magnetic reconnection was examined and compared with the satellite observations of flux transfer events at the day-side magnetopause.

Ding, D. Q.↗

Energetic Particles Investigation (EPI)

The EPI instrument operates during the pre-entry phase of the Galileo Probe. The main objective is the study of the energetic particle population in the inner Jovian magnetosphere and in the upper atmosphere. This will be achieved through omnidirectional measurements of electrons, protons, alpha-particles and heavy ions (Z greater than 2) and recording intensity profiles with a spatial resolution of about 0.02 Jupiter radii. Sectored data will also be obtained for electrons, protons, and alpha-particles to determine directional anisotropies and particle pitch angle distributions. The detector assembly is a two-element telescope using totally depleted circular silicon surface-barrier detectors surrounded by cylindrical tungsten shielding. The lower energy threshold of the particle species investigated during the Probe's pre-entry phase is determined by the material thickness of the Probe's rear heat shield which is required for heat protection of the scientific payload during entry into the Jovian atmosphere. The EPI instrument is combined with the Lightning and Radio Emission Detector and both instruments share one interface of the Probe's power, command, and data unit.

Fischer, H. M.↗

Extraction of helium from individual interplanetary dust particles by step-heating

Fragments from 20 individual particles, collected in the earth's stratosphere and believed to be interplanetary dust particles (IDPs), were subjected to step-heating to see if differences in the release pattern for He-4 could be observed which might provide clues to the origin of the particles. Comparisons were made to the release pattern for 18 individual lunar surface grains heated in the same manner. Twelve of the IDP fragments contained an appreciable amount of He-4, 50 percent of which was released by the time the particles were heated to approximately 630 C. For the 18 individual lunar grains, the corresponding average temperature was 660 C. The He-3/He-4 ratios found for these fragments agreed well with those found for deep Pacific magnetic fines believed to be of extraterrestrial origin, and were comparable to those which have been observed for the solar wind and lunar surface soil grains. Four of the IDP fragments contained appreciably less He-4, and this was released at a higher temperature. The remaining four fragments had too little He-4 to permit a determination. From Flynn's analyses of the problem of the heating of IDPs in their descent in the atmosphere, the present results suggest that the parent IDPs of the 12 particles which contained an appreciable amount of He-4 suffered very little heating in their descent and are likely of asteroidal origin, although one cannot rule out the possibility that at least some of them had a cometary origin and entered the earth's atmosphere at a grazing angle.

Nier, A. O.↗

Pinhole Calibrator For Particle-Sizing Instrument

Rotating-pinhole calibrator designed for use in calibrating and testing optical instrument measuring sizes of cloud droplets, dust particles, and other small particles suspended in flowing air. Easily attachable to particle-size-measuring instrument and suitable for both quick verification of calibration in field and detailed calibration studies in laboratory. Calibrator used to determine such operating parameters of instrument as optical collection angles, depth of field, profile of laser beam used to measure particles, and response to trajectory of particle. Also used to align instrument. Pinhole reused any number of times without risk of variation in diffraction pattern. Furthermore, size of pinhole chosen precisely and at will.

Hovenac, Edward↗

The structure of particle cloud premixed flames

The structure of premixed flames propagating in combustible systems containing uniformly distributed volatile fuel particles in an oxidizing gas mixture is analyzed. This analysis is motivated by experiments conducted at NASA Lewis Research Center on the structure of flames propagating in combustible mixtures of lycopodium particles and air. Several interesting modes of flame propagation were observed in these experiments depending on the number density and the initial size of the fuel particle. The experimental results show that steady flame propagation occurs even if the initial equivalence ratio of the combustible mixture based on the gaseous fuel available in the particles, phi sub u, is substantially larger than unity. A model is developed to explain these experimental observations. In the model, it is presumed that the fuel particles vaporize first to yield a gaseous fuel of known chemical composition which then reacts with oxygen in a one-step overall process. The activation energy of the chemical reaction is presumed to be large. The activation energy characterizing the kinetics of vaporization is also presumed to be large. The equations governing the structure of the flame were integrated numerically. It is shown that the interplay of vaporization kinetics and oxidation process can result in steady flame propagation in combustible mixtures where the value of phi sub u is substantially larger than unity. This prediction is in agreement with experimental observations.

Seshadri, K.↗

Proposal for a Universal Particle Detector Experiment

The Universal Particle Detector Experiment (UPDE), which consists of parallel planes of two diode laser beams of different wavelengths and a large surface metal oxide semiconductor (MOS) impact detector, is proposed. It will be used to perform real-time monitoring of contamination particles and meteoroids impacting the spacecraft surface with high resolution of time, position, direction, and velocity. The UPDE will discriminate between contaminants and meteoroids, and will determine their velocity and size distribution around the spacecraft environment. With two different color diode lasers, the contaminant and meteroid composition will also be determined based on laboratory calibration with different materials. Secondary particles dislodged from the top aluminum surface of the MOS detector will also be measured to determine the kinetic energy losses during energetic meteoroid impacts. The velocity range of this instrument is 0.1 m/s to more than 14 km/s, while its size sensitivity is from 0.2 microns to millimeter-sized particles. The particulate measurements in space of the kind proposed will be the first simultaneous multipurpose particulate experiment that includes velocities from very slow to hypervelocities, sizes from submicrometer- to pellet-sized diameters, chemical analysis of the particulate composition, and measurements of the kinetic energy losses after energetic impacts of meteroids. The experiment will provide contamination particles and orbital debris data that are critically needed for our present understanding of the space environment. The data will also be used to validate contamination and orbital debris models for predicting optimal configuration of future space sensors and for understanding their effects on sensitive surfaces such as mirrors, lenses, paints, and thermal blankets.

Lesho, J. C.↗

Silicon isotopic composition in large meteoritic SiC particles and Na-22 origin of Ne-22

Large SiC particles extracted from acid-insoluble residues of carbonaceous chondrites are isotopically anomalous in both silicon and carbon and contain isotopically extreme noble gases. These particles are thought to have originated in mass outflows from red giant stars and to have existed in the interstellar medium at the time the solar system formed from an interstellar cloud. Calculations show that the silicon isotope correlations in those large SiC particles can be generated only in the most massive carbon stars. Consequently, the almost pure Ne-22 in those particles must be interpreted as the condensation of radioactive Na-22 in the particles as they flowed away from the stars. The Na-22 is produced through proton capture by Ne-21 at the base of the surface convection zone. Ne-22 does not exist abundantly in helium shells hot enough to burn magnesium, which is necessary to establish the measured silicon isotopic composition.

Brown, Lawrence E.↗

A unified transport equation for both cosmic rays and thermal particles

We present a unified transport equation that is valid for particles of all energies if the particle mean free paths are much smaller than macroscopic fluid length scales. If restricted to particles with random speeds much greater than fluid flow speeds, this equation reduces to the previously discussed extended cosmic-ray transport equation. It is significant that this allows one to describe the acceleration of particles from thermal energies to cosmic-ray energies using one transport equation. This is in contrast to previous transport equations (the Parker equation and the extended cosmic-ray transport equation), which were restricted to fast particles. The close connection to the extended cosmic-ray transport equation is demonstrated.

Williams, L. L.↗

A continuum theory of a lubrication problem with solid particles

The governing equations for a two-dimensional lubrication problem involving the mixture of a Newtonian fluid with solid particles at an arbitrary volume fraction are developed using the theory of interacting continuua (mixture theory). The equations take the interaction between the fluid and the particles into consideration. Provision is made for the possibility of particle slippage at the boundaries. The equations are simplified assuming that the solid volume fraction varies in the sliding direction alone. Equations are solved for the velocity of the fluid phase and that of the solid phase of the mixture flow in the clearance space of an arbitrary shaped bearing. It is shown that the classical pure fluid case can be recovered as a special case of the solutions presented. Extensive numerical solutions are presented to quantify the effect of particulate solid for a number of pertinent performance parameters for both slider and journal bearings. Included in the results are discussions on the influence of particle slippage on the boundaries as well as the role of the interacting body force between the fluid and solid particles.

Dai, Fuling↗

Particle drift in the Earth's plasma sheet

We generalize the derivation of the average gradient/curvature-drift for a flux tube filled with an isotropic distribution of particles at specified kinetic energy. The present treatment is restricted to a two-dimensional magnetic field with zero electric field, but it includes all chaotic and Speiser orbits, which do not correspond to the simple picture of gradient/curvature drift. We assume that particles are evenly distributed throughout the regions of phase space allowed by their energy and canonical momentum. This assumption is closely related but not exactly equivalent to the assumption of isotropic pitch-angle distribution. Our derivation assumes that the maximum Larmor radius is small compared to the scale length for equatorial variations in the flux tube volume, but it does not involve any restrictions on the curvature of the field line. The resulting expression for the drift rate is valid for situations where the particle drift velocity is comparable to the thermal speed in some regions. The apparent implication of this generalized treatment is that the existence of very complex non-adiabatic particle trajectories in the plasma sheet may not invalidate previous estimates of the average rate of particle drift out the sides of the tail, estimates that were made under the assumption of simple guiding-center drifts.

Wolf, R. A.↗

New low-Ni (igneous?) particles among the C and C? types of cosmic dust

Low-Ni particles with major element abundances, optical properties, and morphologies sufficiently similar to chondritic interplanetery dust particles (IDP's) to receive JSC Cosmic Dust Catalog classifications of C or C?-types were shown to have trace element contents and mineralogies similar to igneous material. Examination of the JSC Catalog EDX spectra by Cooke et al. has shown that 13 percent of the C-type and 38 percent of the C?-type particles are potentially low-Ni particles. Two new low-Ni particles were identified, and it was shown that an additional fragment from the L2002*C cluster has an igneous composition. A newly analyzed fragment of the W7066*A cluster has a chondritic composition. The W7066*A cluster is important because it has yielded a fragment of igneous composition and another fragment having high concentrations of He and Ne suggesting an extraterrestrial origin.

Flynn, G. J.↗

A Study of Saturn's E-Ring Particles Using the Voyager 1 Plasma Wave Instrument

The flyby of Voyager 1 at Saturn resulted in the detection of a large variety of plasma waves, e.g., chorus, hiss, and electron cyclotron harmonics. Just before the outbound equator crossing, at about 6.1 R(sub s), the Voyager 1 plasma wave instrument detected a strong, well-defined low-frequency enhancement. Initially it was suggested that plasma waves might be responsible for the spectral feature but more recently dust was suggested as at least a partial contributor to the enhancement. In this report we present evidence which supports the conclusion that dust contributes to the low-frequency enhancement. A new method has been used to derive the dust impact rate. The method relies mainly on the 16-channel spectrum analyzer data. The few wide band waveform observations available (which have been used to study dust impacts during the Voyager 2 ring plane crossing) were useful for calibrating the impact rate from the spectrum analyzer data. The mass and, hence, the size of the dust particles were also obtained by analyzing the response of the plasma wave spectrum analyzer. The results show that the region sampled by Voyager 1 is populated by dust particles that have rms masses of up to few times 10(exp -11) g and sizes of up to a few microns. The dust particle number density is on the order of 10(exp -3) m(exp 3). The optical depth of the region sampled by the spacecraft is 1.04 x 10(exp -6). The particle population is centered about 2500 km south of the equatorial plane and has a north-south thickness of about 4000 km. Possible sources of these particles are the moons Enceladus and Tethys whose orbits lie within the E-ring radial extent. These results are in reasonable agreement with photometric studies and numerical simulations.

Tsintikidis, D.↗

Detection of asteroidal dust particles from known families in near-Earth orbits

The orbital evolution of dust particles with two different sizes (diameters equal to 4 and 9 microns) originating from the Eos, Koronis, and Themis asteroidal families was studied. All the planetary perturbations, radiation pressure, Poynting-Robertson light drag, and corpuscular solar wind effects are included in the calculation. It is concluded that for particles having diameters ranging from 4 to 9 microns, Eos particles are quite different in orbital elements from Themis and Koronis particles. For Koronis and Themis particles, the best times to collect them are around April and October.

Dermott, Stanley F.↗

Assessment of velocity/trajectory measurement technologies during a particle capture event

Since the early 1960s, the means to measure the time of flight (TOF) of dust grain within a mechanical detection array has existed, first in the laboratory and then in space experiments. Laboratory hypervelocity dust particle accelerators have used electrostatic detection of charge on accelerated particles for TOF and particle mass detections. These laboratory studies have led to the development of ultra-thin-film sensors that have been used for TOF measurements in dust particle space experiments. The prototypes for such devices were ultra-thin-film capacitors that were used in the OGO series of satellites. The main goal of the experimental work to be described is the development of the capability to determine the velocity vector or trajectory of a dust grain traversing an integrated dust detection array. The results of these studies have shown that the capability of detecting the charge liberated by hypervelocity dust grains with diameters in the micrometer range can be detected. Based on these results, detection systems have been designed to provide a precise analysis of the physical and dynamic properties of micrometer and submicrometer dust grains, namely the design verification unit (DVU). Through unique combinations of in situ detection systems, direct measurements of particle surface charge, velocity, momentum, kinetic energy, and trajectory have been achieved. From these measurements, the remaining physical parameters of mass, size, and density can be determined.

Tanner, William G.↗

Charge, energy and LET spectra of high LET primary and secondary particles in CR-39 plastic nuclear track detectors of the P0006 experiment

We have measured the charge, energy and linear energy transfer (LET) spectra of about 800 high LET (LET(sub infinity) H2O greater than 50 keV/micron) particles in CR-39 plastic nuclear track detectors in the P0006 experiment of LDEF. Primary particles with residual range at the reference surface greater than about 2 microns and secondary particles produced in the detector material with total range greater than about 4 microns were measured. We have used a multi-etch technique and an internal calibration to identify and measure the energy of the particles at the reference surface. The LET spectrum was obtained from the charge and energy distribution of the particles.

Csige, I.↗