Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Particle Accelerator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Laboratory measurements of the physics of auroral electron acceleration by Alfvén waves

While the aurora has attracted attention for millennia, important questions remain unanswered. Foremost is how auroral electrons are accelerated before colliding with the ionosphere and producing auroral light. Powerful Alfvén waves are often found traveling Earthward above auroras with sufficient energy to generate auroras, but there has been no direct measurement of the processes by which Alfvén waves transfer their energy to auroral electrons. Here, we show laboratory measurements of the resonant transfer of energy from Alfvén waves to electrons under conditions relevant to the auroral zone. Experiments are performed by launching Alfvén waves and simultaneously recording the electron velocity distribution. Numerical simulations and analytical theory support that the measured energy transfer process produces accelerated electrons capable of reaching auroral energies. The experiments, theory, and simulations demonstrate a clear causal relationship between Alfvén waves and accelerated electrons that directly cause auroras.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Superconducting radio frequency linear collider HELEN

This article discusses a proposed Higgs-Energy LEptoN (HELEN) $e^+e^-$ linear collider based on advanced traveling wave superconducting radio frequency technology. Here, the proposed collider offers cost and AC power savings, smaller footprint (relative to the ILC), and could be built at Fermilab. After the initial physics run at 250 GeV, the collider could be upgraded either to higher luminosity or to higher, up to 500 GeV, energies.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Wire-coil insert optimization for high-heat-load/flux synchrotron components

Many synchrotron components require high levels of internal-flow, forced-convection heat transfer to minimize surface temperatures, thermal gradients, and thermally induced stress on high-power beam-interacting surfaces. Wire-coil inserts, physically similar to a common spring, are mechanically fitted inside of component cooling passages to optimize heat transfer performance. They are routinely used in Advanced Photon Source (APS) front end and beamline high-heat-load/flux components to significantly enhance convection heat transfer-up to 400% compared to plain open passages. This has the additional benefit of greatly reducing coolant flow requirements for these components. Using several cooling passage sizes, five different wire sizes, and a range of pitch values, an experimental investigation conducted at the APS has determined the average heat transfer coefficient and resulting pressure loss as a function of water flow rate for 65 different wire-coil inserts. Data from this study have been non-dimensionalized and generalized to yield relationships that can be used to determine the heat transfer performance and resulting pressure loss for any given wire-coil insert that may be used at the APS. Through data reduction, the wire-coil insert characteristic dimensions have also been optimized to yield the highest heat transfer enhancement while minimizing the coolant flow requirements. These generalized expressions for wirecoil inserts will be presented, and they can be used by scientists and engineers during the component design process to evaluate achievable heat transfer performance and associated pressure loss, aiding in the establishment of optimized operating parameters and cooling passage flow distribution schemes.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Preliminary results of the 2023 International Fermilab Booster Studies

Here, an overview is given of the methods and preliminary results from dedicated beam studies on three topics conducted over five days in July 2023. In the first study, the Fermilab Booster magnets were held constant at magnetic fields corresponding to the injection energy. The beam loss and emittance growth were observed under varying intensity, tunes, and sextupole resonances. The corresponding beam conditions were also simulated with the MADX-SC code [1]. In the second study, measurements of the vertical half-integer resonance and correction methods are conducted for high-intensity beams ramping in the Booster. Finally, syncho-betatron instabilities are observed during transition-crossing in the Booster under strong space-charge conditions.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Electron-Ion Collider Design Status

The Electron-Ion Collider (EIC) is being designed for construction at Brookhaven National Laboratory. Activities have been focused on beam-beam simulations, polarization studies, and beam dynamics, as well as on maturing the layout and lattice design of the constituent accelerators and the interaction region. The latest design advances will be presented.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Measurement of Beam Energy in the Fermilab's Linac taken at the transfer Line

Linac is the first machine in the Accelerator chain at Fermilab where 𝐻− particles are accelerated from 35 keV to 400 MeV and travel to the Booster where they are stripped. of the extra electrons to become protons. The Booster requires stable beam energy at injection. The Linac extraction energy tuning has been performed using two Beam Velocity Monitors (a.k.a Griffin detectors) to maintain stable relative energy between the Booster and the Linac. Our goal is to control the Linac energy parameters using Machine Learning techniques to increase reliability and quality of beam delivered from Linac. The first step is to understand the data from the Linac extraction diagnostics; and develop reliable, accurate methods for energy measurement and control before implementing machine learning. There were two methods of energy measurement implemented, and the results of these are compared. The first method was time of flight measurements using the Phase probes inside B eam Position Monitors (BPM) that provide the beam’s phase of arrival data. The second method used the relation between beam position data from the BPMs and dispersion values from the 400MeV MAD-X model to calculate momentum variation. The results of these two energy measurement methods compare well as the Linac energy is varied.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Anode sensitivity calibration of photomultiplier tubes used as a readout of the ELOSS detector

We present and discuss the methodology and results for an anode sensitivity calibration of Photomultiplier Tubes (PMTs) that serve as the optical readout of the Energy Loss Optical Scintillation System (ELOSS). The ELOSS detector, under development at the Facility for Rare Isotope Beams (FRIB), is a gaseous Xe scintillation-based detector designed to identify the atomic number (Z) of nuclear reaction fragments by energy-loss measurement. Variation in the anode sensitivity from tube to tube of commercially available PMTs limits ELOSS from reaching its ultimate Z resolution. A methodical approach to calibrating PMT anode sensitivities to a single target value by systematic PMT gain corrections is presented. Although the calibration process is discussed in terms of its impact on ELOSS performance, the presented method is applicable to any optical detector system composed of a large number of PMTs needing anode sensitivity calibration.

Instrumentation for heavy-ion accelerators↗
DOE OSTI2025

Numerical calculation of Coulomb corrections in forward elastic 𝑝↑⁢𝑝 and 𝑝↑⁢𝐴 scattering

The analysis of RHIC hydrogen gas jet target polarimeter measurements of transverse analyzing powers 𝐴 N ⁡(𝑡) in proton-nucleus scattering requires accurate Coulomb corrections to both spin-flip and nonflip amplitudes. These corrections must cover a wide range of nuclear charges 𝑍 and form factor slopes, with flexibility to vary form factors during data fitting. To avoid technically challenging calculations involving a small but finite fictitious photon mass, the Coulomb correction to the nonflip electromagnetic amplitude with an exponential form factor was related to the corresponding correction for the spin-flip amplitude. This approach allows soft photon contributions to all amplitudes, including those with nonexponential form factors, to be calculated in the massless photon limit using only analytical expressions and numerically stable integrals with nonsingular integrands and finite integration limits. In addition, an absorptive correction to the spin-flip electromagnetic amplitude, which plays a critical role in spin effects in forward polarized proton-nucleus scattering, was accurately evaluated.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

New particle pusher with hadronic interactions for modeling multimessenger emission from compact objects

We propose novel numerical schemes based on the Boris method in curved spacetime, incorporating both hadronic and radiative interactions for the first time. Once the proton has lost significant energy due to radiative and hadronic losses, and its gyroradius has decreased below typical scales on which the electromagnetic field varies, we apply a guiding center approximation (GCA). We fundamentally simulate collision processes either with a Monte-Carlo method or, where applicable, as a continuous energy loss, contingent on the local optical depth. To test our algorithm for the first time combining the effects of electromagnetic, gravitational, and radiation fields including hadronic interactions, we simulate highly relativistic protons traveling through various electromagnetic fields and proton backgrounds. We provide unit tests in various spatially dependent electromagnetic and gravitational fields and background photon and proton distributions, comparing the trajectory against analytic results. We propose that our method can be used to analyze hadronic interactions in black hole accretion disks, jets, and coronae to study the neutrino abundance from active galactic nuclei.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Emergence of Long-Range Angular Correlations in Low-Multiplicity Proton-Proton Collisions

This Letter presents the measurement of near-side associated per-trigger yields, denoted ridge yields, from the analysis of angular correlations of charged hadrons in proton-proton collisions at s = 13 TeV . Long-range ridge yields are extracted for pairs of charged particles with a pseudorapidity difference of 1.4 < | Δ η | < 1.8 and a transverse momentum of 1 < p T < 2 GeV / c , as a function of the charged-particle multiplicity measured at midrapidity. This Letter extends the measurements of the ridge yield to the low multiplicity region, where in hadronic collisions it is typically conjectured that a strongly interacting medium is unlikely to be formed. The precision of the new low multiplicity results allows for the first direct quantitative comparison with the results obtained in e + e − collisions at s = 91 GeV and s = 183 – 209 GeV , where initial-state effects such as preequilibrium dynamics and collision geometry are not expected to play a role. In the multiplicity range 8 ≲ ⟨ N ch ⟩ ≲ 24 where the e + e − results have good precision, the measured ridge yields in p p collisions are substantially larger than the limits set in e + e − annihilations. Consequently, the findings presented in this Letter suggest that the processes involved in e + e − annihilations do not contribute significantly to the emergence of long-range correlations in p p collisions. © 2024 CERN, for the ALICE Collaboration 2024 CERN

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

RECORD FAST CYCLING ACCELERATOR MAGNET BASED ON HIGH TEMPERATURE SUPERCONDUCTOR

We report on the High Temperature Superconductor (HTS) based prototype accelerator magnet capable to operate at 12 T/s B-field ramping rate with a very low supporting cryogenic cooling power thus indicating a feasibility of its application in the accelerator requiring high repetition rate and high average beam power. The magnet is designed to simultaneously accelerate two particle beams in the separate beam gaps energized by a single conductor. The design, construction and the power test of the prototype fast-cycling HTS based accelerator magnet is presented while the more detailed description and power test data analysis s given in [1]. As example, the measured cryogenic power loss limit is discussed in terms of the feasibility of application of such a magnet for the construction of the 8 GeV dual proton beam Booster.

43 PARTICLE ACCELERATORS↗