Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRESSURE DEPENDENCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Short- and Intermediate-Range Structure and Dynamics of Fe-Ni-C Liquid Under Compression

Properties of liquid Fe alloys under high-pressure conditions are crucial for understanding the composition, thermal state, and dynamics of Earth’s core. Experiments on such liquids, however, are often performed under pressures far below those of the outer core, necessitating long extrapolations of experimental results to core conditions. Such estimates can be complicated by light elements possibly forming pressure-dependent molecular clusters that can significantly affect the physical properties of liquids as core conditions are approached. First-principles molecular dynamics simulations were employed to compute the properties of an Fe-Ni-C liquid with a composition of Fe 3.7 Ni 0.37 C at 1673 K and pressures from 0 to 67 GPa to benchmark computational methods on pressure effects on the structure and properties of the liquid relative to low pressure experimental results. The short-range structure is manifested by the coordination number (CN) of Fe/Ni-Fe/Ni being around 12, indicative of a nearly close-packed structure in the pressure range, and the CN of C-Fe/Ni gradual increasing from 6.5 to 8.5, indicative of an approximately octahedral to cubic transition as pressure increases. The Fe/Ni-Fe/Ni bond distance, however, is found to be 10 times more compressible than the C-Fe/Ni distance. The intermediate-range structure of Fe/Ni-Fe/Ni and C-Fe/Ni subsystems, described by a partial configurationally decomposed distribution function, undergoes substantial changes, characterized by a significant increase of the number of polyhedra that share 3 atoms with each other. Such dense configurations are related to an increased bulk modulus, decreased diffusion coefficient, decreased activation volume for diffusion, and increased shear viscosity. Reproducing the experimental observations at low pressures provides important support for modeling the liquid under the conditions relevant to the outer core.

58 GEOSCIENCES↗

Room temperature decomposition of dimethyl methylphosphonate on cuprous oxide yields atomic phosphorus

Organophosphorus compounds have a wide range of reactivity depending on the coordination and oxidation state of the P atom. Due to their toxicity, certain organophosphonates are used as pesticides, herbicides, and, notoriously, as chemical nerve agents. The organophosphonate decomposition mechanism depends strongly on the substrate material, which motivates careful analysis of a range of potential materials for decontamination and sensing applications. Here, we present a study of the decomposition of dimethyl methylphosphonate (DMMP), a simulant molecule for the nerve agent sarin, on polycrystalline cuprous oxide surfaces (Cu 2 O). We use ambient pressure X-ray photoelectron spectroscopy (APXPS) and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy to monitor the pressure-dependent surface chemistry during exposure to DMMP vapor. At room temperature, we observe extensive degradation of DMMP, which includes the formation of reduced P products on the sample surface. We identify five unique P-containing species in the P 2p APXPS spectra, including atomic P and a surface-bound phosphinate [O=PH(OCH 3 )Osingle bondCu]. Here we propose a DMMP decomposition pathway whereby accumulation of this phosphinate species leads to an autocatalytic reaction on the Cu 2 O surface which yields reduced P species. After DMMP exposure, heating the Cu 2 O sample to 265°C leads to complete removal of all carbonaceous species and accumulation of a phosphate layer with stoichiometry similar to P 2 O 5 . These results introduce a new mechanism of room-temperature DMMP decomposition on metal oxides, which could be leveraged for the design of tailored metal oxide materials for catalyzing organophosphonate decomposition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic transport, thermal transport, thermal expansion, and magnetization in the strongly correlated metal LaNi⁢O 3

Perovskite structured LaNiO 3 is a strongly correlated metal with intriguing thermal and magnetic properties. The volume dependence of calculated and measured physical properties can add additional critical information to develop a more in-depth understanding of this strongly correlated phenomenon. Taking advantage of recent single crystal LaNiO 3 growth using the floating-zone method, we have measured the thermal expansion, the magnetostriction, and the pressure dependence of the magnetic susceptibility, which then allows derivation of the Grüneisen parameters γ e = $\frac{dlnN(E_F)}{d lnV}$, γ χ = $\frac{dlnχ}{d lnV}$, as well as of electric and thermal transport properties. We simulate the volume dependence of structural and magnetic properties using Density Functional Theory calculations at the Generalized Gradient Approximation level. A large discrepancy between experimental values and calculated ones suggests that strong correlations are likely to be dynamic in nature. This study also provides a side-by-side comparison of measurements in single crystal and polycrystalline samples of LaNiO 3 to elucidate intrinsic materials properties. A broad hump at high temperatures in the temperature dependence of magnetization found in the single crystal sample of LaNiO 3 has been rationalized by a model that includes the influence of electron correlations on the Landau diamagnetism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A theoretical study of a two-wavelength lidar technique for the measurement of atmospheric temperature profiles

The theory of differential absorption lidar measurements for lines with a Voigt profile is given and applied to a two-wavelength technique for measuring the atmospheric temperature profile using a high J line in the oxygen A band. Explicit expressions for the temperature and pressure dependence of the absorption coefficient are developed for lines with a Voigt profile. An iteration procedure for calculating the temperature for narrow laser bandwidths is described which has an accuracy better than 0.2 K for bandwidths less than 0.01/cm. To reduce the errors in lidar measurements due to uncertainties in pressure, a method for estimating the pressure from the temperature profile is described. A procedure for extending the differential absorption technique to the case of finite laser bandwidth with good accuracy is also described. Simulation results show that a knowledge of the laser frequency is needed to 0.005/cm for accurate temperature measurements. Evaluation of the sensitivity for both ground- and Shuttle-based measurements shows accuracies generally better than 1 K. This technique allows up to an order of magnitude improvement in sensitivity compared to other differential absorption lidar techniques.

Korb, C. L.↗

Unified Formulation of the Aeroelasticity of Swept Lifting Surfaces

An unified approach for dealing with stability and aeroelastic response to time-dependent pressure pulses of swept wings in an incompressible flow is developed. To this end the indicial function concept in time and frequency domains, enabling one to derive the proper unsteady aerodynamic loads is used. Results regarding stability in the frequency and time domains, and subcritical aeroelastic response to arbitrary time-dependent external excitation obtained via the direct use of the unsteady aerodynamic derivatives for 3-D wings are supplied. Closed form expressions for unsteady aerodynamic derivatives using this unified approach have been derived and used to illustrate their application to flutter and aeroelastic response to blast and sonic-boom signatures. In this context, an original representation of the aeroelastic response in the phase space was presented and pertinent conclusions on the implications of some basic parameters have been outlined.

Silva, Walter↗

Rate Dependent Deformation and Strength Analysis of Polymer Matrix Composites

A research program is being undertaken to develop rate dependent deformation and failure models for the analysis of polymer matrix composite materials. In previous work in this program, strain-rate dependent inelastic constitutive equations used to analyze polymers have been implemented into a mechanics of materials based composite micromechanics method. In the current work, modifications to the micromechanics model have been implemented to improve the calculation of the effective inelastic strain. Additionally, modifications to the polymer constitutive model are discussed in which pressure dependence is incorporated into the equations in order to improve the calculation of constituent and composite shear stresses. The Hashin failure criterion is implemented into the analysis method to allow for the calculation of ply level failure stresses. The deformation response and failure stresses for two representative uniaxial polymer matrix composites, IM7/977-2 and AS4-PEEK, are predicted for varying strain rates and fiber orientations. The predicted results compare favorably to experimentally obtained values.

Goldberg, Robert K.↗

Calibration of ruby and matlockite luminescence lines from the melting of mercury: constraints on the initial slopes

We have measured the luminescence shifts of the ruby’s R1- and R2-lines and the line of 5 D 0 → 7 F 0 from Sm 2+ :SrFCl corresponding to the melting pressure of mercury that is recommended by the AIRAPT task force as an International Practical Pressure Scale (IPPS). The linear coefficients of the pressure dependence of the R1-, R2-lines, and the luminescence line of Sm 2+ :SrFCl are determined to be 0.3722 ± 0.002, 0.3796 ± 0.002, and 1.123 ± 0.002 nm/GPa, respectively. The results not only put tight constraints on the initial slopes of ruby and Sm 2+ :SrFCl gauges, but also link the luminescence-based pressure gauges to the more fundamental primary piston gauges.

36 MATERIALS SCIENCE↗

Ultrafast structural response of shock‐compressed plagioclase

Abstract Meteor impacts can induce unique pressure‐dependent structural changes in minerals due to the propagation of shock waves. Plagioclase—ubiquitous throughout the Earth’s crust, extraterrestrial bodies, and meteorites—is commonly used for reconstructing the impact history and conditions of the parent bodies. However, there have been unresolved inconsistencies in the interpretation of shock transformations across previous studies: The pressure at which amorphization begins and the process by which it occurs is the subject of ongoing debate. Here, we utilize time‐resolved in situ X‐ray diffraction (XRD) to probe the phase transformation pathway of plagioclase during shock compression at a sub‐nanosecond timescale. Direct amorphization begins at pressures much lower than what was previously assumed, just above the Hugoniot elastic limit of 5 GPa, with full amorphization to a high‐density amorphous phase, observed at 32(10) GPa and 20 ns. Upon release, the material partially recrystallizes back into the original structure, demonstrating a memory effect.

58 GEOSCIENCES↗

Pressure-Induced Decrease in the Curie Temperature of Gd{sub 2}Fe{sub 17}: LSDA+U Calculations

To explain the magnetic properties of advanced ferromagnetic intermetallic compounds of the R{sub 2}Fe{sub 17} (R is a rare-earth element) class, experimentalists often use the hypothesis of competition between ferromagnetic exchange and antiferromagnetic exchange between four types of the nearest iron atoms in nonequivalent lattice sites. For the rhombohedral Gd{sub 2}Fe{sub 17} ferromagnet, we calculate the magnetic moments of iron and gadolinium ions, the parameters of exchange between Fe atoms, and Curie temperature T{sub C} at a zero pressure and during hydrostatic lattice compression. The magnetic moment of the unit cell of Gd{sub 2}Fe{sub 17} is shown to decrease under pressure, and this decrease is almost completely associated with a decrease in the magnetic moments of Fe rather than Gd ions, the pressure dependence of the magnetic moments of which is weaker by an order of magnitude. In contrast to the hypothesis regarding the competition of exchange interactions between different kinds of Fe atoms, the parameters of exchange between the nearest iron atoms in different crystallographic sites are found to be positive ferromagnetic (at a zero pressure and during compression), and a ferromagnetic character of interaction is shown to remain unchanged under pressure even for Fe atoms in the so-called dumbbell sites with the nearest interatomic distances. The Curie temperature T{sub C} of Gd{sub 2}Fe{sub 17} is shown to decrease with increasing pressure. The changes in the exchange parameters and the magnetic moments of Gd{sub 2}Fe{sub 17} during compression are found to be mainly related to a change in the position of energy spectrum branches with respect to each other and the Fermi level ϵ{sub F} rather than to a change in the overlapping of wavefunctions, which play a minor role.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-pressure ignition delay time measurements of a four-component gasoline surrogate and its high-level blends with ethanol and methyl acetate

Ignition delay times of a gasoline surrogate (iso-octane/toluene/n-heptane/1-hexene at 55/25/15/5% by liquid volume, developed in McCormick et al. 2017) with high-level bioblendstock-gasoline surrogate blends (50% and 85% biofuel by liquid volume of each ethanol and methyl acetate) were collected behind reflected shock waves. Post-reflected-shock temperatures ranged from 968 to 1361 K at pressures of about 4, 10, 25, and 50 atm. Data were collected for real fuel–air mixtures at fuel lean and stoichiometric conditions (φ = 0.5, 1.0) with focus on the more-practical, fuel-lean conditions. Ignition delay times were measured from OH* chemiluminescence around 307 nm using an endwall diagnostic. The RON and MON of the surrogate were 90.3 and 84.7, respectively. Ethanol was chosen due to its wide use in flex-fuel vehicles and availability, while also providing an increased octane rating. Methyl acetate was chosen for its especially high octane rating to investigate the effect of an extreme case. To validate the gasoline surrogate, the data are compared to real gasoline (RD387) and several gasoline surrogate experiments from the literature. Using the wide range of pressures studied, the gasoline surrogate’s pressure dependence was quantified to account for test-to-test variations using regression analysis. Similarly, a global correlation for gasoline and its surrogates was developed using all available data from the literature. Two modern chemical kinetics models targeting gasoline and its surrogates are compared to the ignition delay time measurements. These new high-pressure, high-bioblendstock concentration tests provide required chemical kinetic data for optimizing fuel and engine design.

42 ENGINEERING↗

Vibrational, elastic, and structural properties of cubic silicon carbide under pressure up to 75 GPa: Implication for a primary pressure scale

We present results of concomitant measurements of synchrotron x-ray diffraction (XRD), Brillouin, and Raman spectroscopy on the single crystal samples of cubic silicon carbide (3C-SiC) under quasi-hydrostatic pressures up to 65 GPa, as well as x-ray diffraction and Raman spectroscopy up to 75 GPa. We determined the equation of state of 3C-SiC and pressure dependencies of the zone-center phonon, elastic tensor, and mode Gruneisen parameters. Cubic SiC lattice was found to be stable up to 75 GPa, but there is a tendency for destabilization above 40 GPa, based on softening of a transverse sound velocity. By applying the concomitant density and elasticity measurements, we determined the pressure on the SiC sample without referring to any other pressure scale thus establishing a new primary pressure scale with a 2%–4% precision up to 65 GPa. We proposed corrections to the existing ruby and neon pressure scales, and also calibrated cubic SiC as a pressure marker for the x-ray diffraction and Raman experiments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electrical resistance of single-crystal magnetite (Fe 3 O 4 ) under quasi-hydrostatic pressures up to 100 GPa

We measured the pressure dependence of electrical resistance of single-crystal magnetite (Fe 3 O 4 ) under quasi-hydrostatic conditions to 100 GPa using low-temperature, megabar diamond-anvil cell techniques in order to gain insight into the anomalous behavior of this material that has been reported over the years in different high-pressure experiments. The measurements under nearly hydrostatic pressure conditions allowed us to detect the clear Verwey transition and the high-pressure structural phase. Furthermore, the appearance of a metallic ground state after the suppression of the Verwey transition around 20 GPa and the concomitant enhancement of electrical resistance caused by the structural transformation to the high-pressure phase form reentrant semiconducting-metallic-semiconducting behavior, though the appearance of the metallic phase is highly sensitive to stress conditions and details of the measurement technique.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The influence of hydrostatic pressure on the magnetic and magnetocaloric properties of DyRu 2 Si 2

In this paper, we report the magnetic and magnetocaloric properties of the tetragonal rare-earth compound DyRu 2 Si 2 under applied hydrostatic pressure. The isothermal entropy change (ΔS) and the adiabatic temperature change (ΔT ad ) were calculated from magnetization data collected at different applied pressures and from heat capacity measurements conducted at atmospheric pressure, respectively. The application of hydrostatic pressure significantly modified the multi-step magnetization curve and the saturation magnetization. A suppression of the magnetization was observed for P = 0.588 GPa and P = 0.654 GPa whereas, at about P ≈1 GPa, the saturation magnetization increased and the magnetization isotherms again resembled the curves measured at atmospheric pressure. A small thermal hysteresis was observed between the heating and cooling M(T) curves at T t =3.4 K, with an applied magnetic field of H = 0.1 T. This thermal hysteresis indicates a first-order like transition which was also supported by the Arrott plot analysis. Finally, the volume magnetostriction was estimated from the pressure-dependent magnetization measurements using a Maxwell relation.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Magnetoelastic coupling and phases in the skyrmion lattice magnet Gd 2 PdSi 3 discovered by high-resolution dilatometry

In this work, we report detailed thermodynamic studies on high-quality single crystals of the centrosymmetric skyrmion-hosting intermetallic Gd 2 PdSi 3 by means of high-resolution capacitance dilatometry in fields up to 15 T which are complemented by specific heat and magnetization studies. Our dilatometric measurements show magnetoelastic effects associated with antiferromagnetic order at T N1 =22.3 K and T N2 =19.7 K, as well as strong field effects in an applied magnetic field of 15 T up to 200 K (150 K) for B ∥ c (B ∥ a*, i.e., B ⊥ c). The data allow us to complete the magnetic phase diagram, including a feature at T * ≈13K below which an additional degree of freedom becomes relevant. The magnetic B vs T phase diagram for the a * axis is also reported. Grüneisen analysis shows the onset of magnetic contributions around 60 K, i.e., well above TN1. Uniaxial pressure dependencies of opposite signs, –1.3 and 0.3 K/GPa, are extracted for the out-of-plane and in-plane directions at T N1 . For T * we obtain ∂T * /∂p c =1.4 K/GPa. In particular we elucidate thermodynamic properties of the recently discovered skyrmion lattice phase and show that it is strongly enhanced by uniaxial pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ignition properties of n-butane and iso-butane in a rapid compression machine

Autoignition delay times of n-butane and iso-butane have been measured in a Rapid Compression Machine in the temperature range 660-1010 K, at pressures varying from 14 to 36 bar and at equivalence ratios {phi} = 1.0 and {phi} = 0.5. Both butane isomers exhibit a negative-temperature-coefficient (NTC) region and, at low temperatures, two-stage ignition. At temperatures below {proportional_to}900 K, the delay times for iso-butane are longer than those for the normal isomer, while above this temperature both butanes give essentially the same results. At temperatures above {proportional_to}720 K the delay times of the lean mixtures are twice those for stoichiometric compositions; at T < 720 K, the equivalence ratio is seen to have little influence on the ignition behavior. Increasing the pressure from 15 bar to 30 bar decreases the amplitude of the NTC region, and reduces the ignition delay time for both isomers by roughly a factor of 3. In the region in which two-stage ignition is observed, 680-825 K, the duration of the first ignition stage decreases sharply in the range 680-770 K, but is essentially flat above 770 K. Good quantitative agreement is found between the measurements and calculations for n-butane using a comprehensive model for butane ignition, including both delay times in the two-stage region, with substantial differences being observed for iso-butane, particularly in the NTC region. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal equation of state of TiC: A synchrotron x-ray diffraction study

The pressure-volume-temperature measurements were carried out for titanium carbide (TiC) at pressures and temperatures up to 8.1 GPa and 1273 K using energy-dispersive synchrotron x-ray diffraction. Thermoelastic parameters were derived for TiC based on a modified high-temperature Birch-Murnaghan equation of state and a thermal pressure approach. With the pressure derivative of the bulk modulus, K{sub 0}{sup '}, fixed at 4.0, we obtain: the ambient bulk modulus K{sub 0}=268(6) GPa, which is comparable to previously reported value; temperature derivative of bulk modulus at constant pressure ({partial_derivative}K{sub T}/{partial_derivative}T){sub P}=-0.026(9) GPa K{sup -1}, volumetric thermal expansivity {alpha}{sub T}(K{sup -1})=a+bT with a=1.62(12)x10{sup -5} K{sup -1} and b=1.07(17)x10{sup -8} K{sup -2}, pressure derivative of thermal expansion ({partial_derivative}{alpha}/{partial_derivative}P){sub T}=(-3.62{+-}1.14)x10{sup -7} GPa{sup -1} K{sup -1}, and temperature derivative of bulk modulus at constant volume ({partial_derivative}K{sub T}/{partial_derivative}T){sub V}=-0.015(8) GPa K{sup -1}. These results provide fundamental thermophysical properties for TiC for the first time and are important to theoretical and computational modeling of transition metal carbides.

36 MATERIALS SCIENCE↗

Isotropic Thermal Expansivity and Anisotropic Compressibility of ReB2

We experimentally investigated some of the mechanical properties of ReB{sub 2} under high temperature/pressure (T/P) conditions. High-T experiments (up to 600 C at 1 atm) were carried out in a high-T oven attached to a conventional X-ray diffractometer whereas high-P experiments (up to about 42 GPa at 25 C) were conducted in a diamond-anvil cell using synchrotron X-ray radiation. High-T data suggest a highly isotopic thermal expansivity whereas high-P data suggest a highly anisotropic compressibility for ReB{sub 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comparison of the high-pressure behavior of the cerium oxides C e 2 O 3 and Ce O 2

We studied the high-pressure behavior of Ce 2 O 3 using angle-dispersive x-ray diffraction to 70 GPa and compared with that of CeO 2 . Up to the highest pressure Ce 2 O 3 remains in the hexagonal phase (space group 164, P ¯32/m1) typical for the lanthanide sesquioxides. We did not observe a theoretically predicted phase instability for 30 GPa. The isothermal bulk modulus and its pressure derivative for the quasihydrostatic case are B 0 = 111 ± 2 GPa, B' 0 = 4.7 ± 0.3, and for the case without pressure-transmitting medium B 0 = 104 ±4 GPa, B' 0 = 6.5 ± 0.4. Starting from ambient-pressure magnetic susceptibility measurements for both oxides in highly purified form,we find that the Ce atom in Ce 2 O 3 behaves like a trivalent Ce 3+ ion (2.57μB per Ce atom) in contrast to previously published data. Since x-ray emission spectroscopy of the Lγ (4d 3/2 → 2p 1/2 ) transition is sensitive to the 4f -electron occupancy, we also followed the high-pressure dependence of this line for both oxides up to 50 GPa. We observed no change of the respective line shape, indicating that the 4f -electron configuration is stable for both materials. We posit from this data that the 4f electrons do not drive the volume collapse of CeO 2 from the high-symmetry, low-pressure fluorite structure to the lower-symmetry orthorhombic phase.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗