Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PIN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Electronic properties and pinning of the Fermi level in irradiated II-IV-V{sub 2} semiconductors

Experimental data on the electronic properties of II-IV-V{sub 2} semiconductors irradiated with high-energy particles (electrons, protons, and neutrons) are reported. The limiting electrical characteristics of irradiated ternary compounds are evaluated and compared with the corresponding data for the binary III-V analogues of the compounds. Particular emphasis is placed on the determination of the limiting position of the Fermi level, F{sub lim}, in irradiated II-IV-V{sub 2} compounds. The results of calculations of the energy position of the intrinsic charge-neutrality level are presented.

36 MATERIALS SCIENCE↗

Pinning down electroweak dipole operators of the top quark

Here, we consider hadronic top quark pair production and pair production in association with a photon or a Z boson to probe electroweak dipole couplings in tb¯W, tt¯γ, and tt¯Z interactions. We demonstrate how measurements of these processes at the 13 TeV LHC can be combined to disentangle and constrain anomalous dipole operators. The construction of cross section ratios allows us to significantly reduce various uncertainties and exploit orthogonal sensitivity between the tt¯γ and tt¯Z couplings. In addition, we show that angular correlations in tt¯ production can be used to constrain the remaining tb¯W dipole operator. Our approach yields excellent sensitivity to the anomalous couplings and can be a further step toward precise and direct measurements of the top quark electroweak interactions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Coexisting multiple dynamic states generated by magnetic field in Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8}+{delta} stacked Josephson junctions.

Josephson vortices in naturally stacked Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8+{delta}} tunneling junctions display rich dynamic behavior that derives from the coexistence of three basic states: static Josephson vortex lattice, coherently moving lattice, and incoherent quasiparticle tunneling state. The rich structure of hysteretic branches observed in the current-voltage characteristics can be understood as combinatorial combinations of these three states which are realized in different junctions and evolve separately with magnetic field and bias current. In particular, the multiple Josephson vortex flow branches at low-bias currents arise from the individual depinning of Josephson vortex rows in each junction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fuel Performance Modeling Results for Representative FCRD Irradiation Experiments: Projected Deformation in the Annular AFC-3A U-10Zr Fuel Pins and Comparison to Alternative Designs

The objective of the present study was to predict the outcome of the AFC-3A annular U-10Zr fuel irradiation experiment. Specifically, the study attempted to predict whether the annular fuel will swell inward and fill the annulus, or swell outward resulting in an undesirable cladding deformation. It was predicted that both 55% and 75% annular fuels operating at 350 W/cm for 201 days will swell inward and partially fill the annulus which signifies a positive outcome of the experiment. The driving mechanism for such behavior is the fuel creep under the compressive stress exerted on the fuel by the cladding as a result of the fuel cladding mechanical interaction. Comparison with the solid fuel revealed that the annular fuel is expected to swell less early in life due to the mechanical constraint provided by the cladding. Furthermore, mechanical constraint is expected to yield a marked reduction of the axial elongation of the annular fuel as compared to the solid fuel. The prediction is based on the assumption that the annular fuel is not capable of moving axially relative to the cladding after the two come in contact. Post irradiation examination results would be very useful to assess the validity of this assumption. Specifically, underprediction of the axial growth would point to the fact that some slippage of the fuel relative to the cladding occurs after the onset of the FCMI. As fuel creep plays the major role in the deformation of the annular fuel, the contributions from the thermal and irradiation induced creep to the total creep rate of fuel were examined to provide guidance for possible creep testing experiments of the fuel (separate effect tests). It was found that irradiation induced creep dominates deformation of the fresh fuel at low temperatures. At high temperatures, and in the case of porous fuel, the thermal creep of the fuel becomes dominant and irradiation induced creep can be neglected. Fission gas induced porosity seems to accelerate fuel creep drastically. Recognizing the sensitivity of the fuel creep to the porosity, additional studies exploring this phenomenon and verifying published equations either experimentally or through computation may benefit the understanding of the annular fuel behavior.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Analysis of Sample DUM002 (INL pin casting, 800C/48 hr, 500C 8 hr): Metallographic re-prep, FIB TEM foil extraction and (S)TEM analysis [Slides]

The scale of FIB foils versus the microstructure makes it likely that more than one feature of interest may be in each FIB foil prepared. Intergranular and intragranular silicides and carbides are present. It may be that the silicides are the more potent nuclea9on sites, by initial impressions without statistics. Non-statistical measurements of the lamellar spacing average approximately 300 to 500 nm. Measured U-Mo ratios via EDS were near expectations, even without the need for standards, simplifying analyses.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

EPRI/DOE High Burnup Fuel Sister Pin Test Plan Simplification and Visualization

The EPRI/DOE High Burnup Confirmatory Data Project (herein called the "Demo") is a multi-year, multi-entity confirmation demonstration test with the purpose of providing quantitative and qualitative data to show how high-burnup fuel ages in dry storage over a ten-year period. The Demo involves obtaining 32 assemblies of high-burnup PWR fuel of four common cladding alloys from the North Anna Nuclear Power Plant, drying them according to standard plant procedures, and then storing them in an NRC-licensed TN-3 2B cask on the North Anna dry storage pad for ten years. After the ten-year storage time, the cask will be opened and the rods will be examined for signs of aging. Twenty-five rods from assemblies of similar claddings, in-reactor placement, and burnup histories (herein called "sister rods") have been shipped from the North Anna Nuclear Power Plant and are currently being nondestructively tested at Oak Ridge National Laboratory. After the non-destructive testing has been completed for each of the twenty-five rods, destructive analysis will be performed at ORNL, PNNL, and ANL to obtain mechanical data. Opinions gathered from the expert interviews, ORNL and PNNL Sister Rod Test Plans, and numerous meetings has resulted in the Simplified Test Plan described in this document. Some of the opinions and discussions leading to the simplified test plan are included here. Detailed descriptions and background are in the ORNL and PNNL plans in the appendices . After the testing described in this simplified test plan h as been completed , the community will review all the collected data and determine if additional testing is needed.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Three-dimensional fuel pin model validation by prediction of hydrogen distribution in cladding and comparison with experiment

To correctly describe and predict this hydrogen distribution there is a need for multi-physics coupling to provide accurate three-dimensional azimuthal, radial, and axial temperature distributions in the cladding. Coupled high-fidelity reactor-physics codes with a sub-channel code as well as with a computational fluid dynamics (CFD) tool have been used to calculate detailed temperature distributions. These high-fidelity coupled neutronics/thermal-hydraulics code systems are coupled further with the fuel-performance BISON code with a kernel (module) for hydrogen. Both hydrogen migration and precipitation/dissolution are included in the model. Results from this multi-physics analysis is validated utilizing calculations of hydrogen distribution using models informed by data from hydrogen experiments and PIE data.

36 MATERIALS SCIENCE↗

Validation of Pin Span Superposition to Reconstruct Gridded Bundle Flows

This milestone shows a demonstration of the surface map model to map the surface temperature for single-phase computational fluid dynamics simulation data from STAR-CCM+ to the subchannel code CTF using a two-step process that captures global and local rod surface temperature behavior based on simulation boundary conditions and position. This model can be used to improve results from CTF by transforming surface temperatures obtained from CTF to model data that resembles data from STAR-CCM+. A summary of the current two-step model process and results of the initial investigations with a single subchannel and a 5 x 5 set of fuel rods are shown and discussed within, with suggestions for further improvements.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

In-situ small-scale mechanical testing of fast reactor mixed oxide pins: completion report

The present work represents a pioneering study in the application of advanced techniques to measure micro-mechanical properties of highly radioactive advanced nuclear fuels. First data of Young’s modulus and hardness of fast reactor MOX at burnup exceeding 150 GWd/tHM have been obtained. Despite the challenges encountered in the current work due to equipment malfunction, the experimental approach sought in this work has been proved successful in obtaining new data of high relevance for fuel performance on system with high Pu content and high radiotoxicity with extremely limited exposure to personnel. Further experiments will be conducted in the future based on the present approach, leveraging the experience gained in this project.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Experiments to Measure the Inversion Point of the Isothermal Reactivity Coefficient in a Water-Moderated Pin-Fueled Critical Assembly at Sandia [Slides]

Two experiment series are planned to measure temperature effects in the Sandia Critical Experiments. The first series (IER-304) will measure the critical size of a fuel rod configuration at several temperatures. The second series (IER-452) will measure the inversion temperature of the isothermal reactivity coefficient in the Sandia critical assembly. Each experiment in the second series will be preceded by one or more experiments in the first series. This presentation addresses the conceptual design of the inversion temperature experiments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

PNNL FY 2022 Sibling Pin Testing Results

This report presents the results of testing two rods after heat treatment at 400C for 8 hours and compares to the results from FY 2021 of similar rods that were tested as baseline. The heat treatment resulted in a decrease in yield stress.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗