Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHOSPHIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

The crystal and magnetic structure of the magnetocaloric compound FeMnP{sub 0.5}Si{sub 0.5}

The crystal and magnetic structure of the magnetocaloric compound FeMnP{sub 0.5}Si{sub 0.5} has been studied by means of neutron and X-ray powder diffraction. Single phase samples of nominal composition FeMnP{sub 0.5}Si{sub 0.5} have been prepared by the drop synthesis method. The compound crystallizes in the Fe{sub 2}P-type structure (P6-bar 2m) with the magnetic moments aligned along the a-axis. It is found that the Fe atoms are mainly situated in the tetrahedral 3g site while the Mn atoms prefer the pyramidal 3f position. The material is ferromagnetic (T{sub C}=382 K) and at 296 K the total magnetic moment is 4.4{mu}{sub B}/f.u. It is shown that the magnetic moment in the 3f site is larger (2.5{mu}{sub B}) than in the 3g site (1.9{mu}{sub B}). - Graphical abstract: The magnetic structure of FeMnP{sub 0.5}Si{sub 0.5} at 296 K. Revealed from refinements of neutron powder diffraction data. Highlights: > Single phase samples of the compound FeMnP{sub 0.5}Si{sub 0.5} has been synthesized by the drop synthesis method. > The crystal and magnetic structure was revealed from neutron powder diffraction data. > The material was found to crystallize in the Fe{sub 2}P-structure (P6-bar 2m). > The magnetic moments are coordinated along the a-axis with a total moment of 4.4{mu}{sub B}. > The large magnetic moments make FeMnP{sub 0.5}Si{sub 0.5} useful in magnetocaloric applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical properties and morphology of InAs/InP (113)B surface quantum dots

We report on long-wavelength photoluminescence (PL) emission at room temperature from self-organized InAs surface quantum dots grown by gas-source molecular beam epitaxy on a GaInAsP/InP (113)B substrate. The influence of arsenic pressure conditions during growth on the PL emission of surface quantum dots is detailed as well as oxide/contamination layer formation after growth. Experimental results are in good agreement with six-band k{center_dot}p theory in the envelope function approximation.

36 MATERIALS SCIENCE↗

ArF laser-based quantum well intermixing in InGaAs/InGaAsP heterostructures

Radiation from a 193 nm ArF laser was investigated to modify surface properties of InGaAs/InGaAsP quantum well (QW) heterostructures and introduce defects required to enhance intermixing during the annealing process. A top 200 nm thick sacrificial layer of InP served as a reservoir for laser generated defects. The irradiation with up to 90 pulses at 65-150 mJ/cm{sup 2} allowed to generate an array of 1.2x1 mm{sup 2} sites of QW intermixed material, with bandgap energy blueshifted up to 107 nm. We discuss the mechanism and advantages of this approach for postgrowth wafer level fabrication of multibandgap QW material.

36 MATERIALS SCIENCE↗

Molecular beam epitaxy grown (Ga,Mn)(As,P) with perpendicular to plane magnetic easy axis

We present an experimental investigation of the magnetic, electrical, and structural properties of Ga{sub 0.94}Mn{sub 0.06}As{sub 1-y}P{sub y} layers grown by molecular beam epitaxy on GaAs substrates for y{<=}0.3. X-ray diffraction measurements reveal that the layers are under tensile strain, which gives rise to a magnetic easy axis perpendicular to the plane of the layers. The strength of the magnetic anisotropy and the coercive field increases as the phosphorous concentration is increased. The resistivity of all samples shows metallic behavior with the resistivity increasing as y increases. These materials will be useful for studies of micromagnetic phenomena requiring metallic ferromagnetic material with perpendicular magnetic anisotropy.

36 MATERIALS SCIENCE↗

Quantitative compositional analysis and strain study of InAs quantum wires with InGaAlAs barrier layers

Quantitative compositional analysis of InAs quantum wires deposited between In{sub 0.53}Ga{sub 0.37}Al{sub 0.1}As barrier layers grown on InP substrates was performed by electron energy loss spectrometry and energy dispersive x-ray spectrometry. An indium-rich region in the center of the wire, with decreasing indium concentration toward the interface with the barrier layers, was observed from indium concentration maps for individual quantum wires. 'Stripelike' contrast modulation was observed in diffraction contrast transmission electron microscope images of the In{sub 0.53}Ga{sub 0.37}Al{sub 0.1}As barrier layer immediately above the quantum wires. The contrast originated from indium compositional modulations in the upper barrier layer as confirmed by electron energy loss spectrometry and the modulation is attributed to the presence of an inhomogeneous elastic strain field generated by the buried quantum wires. These results suggest that quantitative analysis of the composition and strain distributions at very high spatial resolution provides insights necessary to further model the physical properties and to understand the growth of these nanostructures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electrical properties of C-doped p-type GaP and GaPN grown by molecular beam epitaxy

The electrical properties of C-doped p-type GaP and GaPN epilayers grown by molecular beam epitaxy using CBr{sub 4} as a doping source have been investigated. C is shown to be a relatively shallow acceptor both in GaP and GaPN, with the activation energy in the regions of 16-33 and 18-35 meV, respectively. GaP demonstrates ordinary conduction characteristics, whereas GaPN has a typical mixed conduction effect and the impurity conduction becomes dominant at low temperatures. It is conjectured that impurity conduction and ionized impurity scattering mechanisms in GaPN may be related to the inactivated C and N radicals.

36 MATERIALS SCIENCE↗

Interband transitions in strained InGaAs/AlAsSb multiple-quantum-well structures

Room temperature photoreflectance (PR) was performed on strained In{sub x}Ga{sub 1-x}As/AlAsSb quantum wells (QWs) grown on InP substrates. We observed clear and well-resolved structures, which could be attributed to the interband optical transitions originating in the QWs. By comparing the transition energies measured from the PR spectra with those theoretically calculated from the confined energy levels in the QWs, we confirmed that the value of the conduction band offset of In{sub 0.8}Ga{sub 0.2}As/AlAsSb was close to 1.7 eV and the nonparabolicity of the conduction band of In{sub 0.8}Ga{sub 0.2}As was between 2.25 and 2.5, which is higher than that obtained using a three-band model.

36 MATERIALS SCIENCE↗

Terahertz emission from InP

We investigate the generation of THz radiation by the application of ultra-short near-infrared optical pulses to bulk unbiased InP. The THz radiation is detected in the direction of the specular reflection. While the overall emission characteristics are similar to those displayed by InAs under similar excitation conditions, in contrast to InAs, a single-cycle only variation in THz signal, of about +-20%, is observed as the sample is rotated through 360 deg. around the surface normal.

36 MATERIALS SCIENCE↗

Silica coated magnetic nanoparticles for separation of nuclear acidic waste

Fe{sub 2}O{sub 3} magnetic nanoparticles (MNPs) have been coated with silica, followed by covalent attachment of the actinide specific chelators to separate nuclear waste in acidic conditions. A general model is developed to relate the surface coating to the particle's magnetization change, providing an alternative way to characterize the size-distribution/aggregation of MNPs. The optimized silica coating protects the Fe{sub 2}O{sub 3} MNPs from iron leaching under highly acidic conditions, facilitates the dispersion of MNPs, and dramatically increases the loading capacity of chelator onto the MNPs. Compared with the uncoated counterparts, the silica coated MNPs show enhanced actinide separation efficiency.

36 MATERIALS SCIENCE↗

Characterization of Si volume- and delta-doped InGaAs grown by molecular beam epitaxy

Bulk InGaAs layers were grown at 400 deg. C lattice-matched to InP semi-insulating substrates by molecular beam epitaxy. Si doping of the layers was performed by applying volume- and delta-doping techniques. The samples were characterized by capacitance-voltage, van der Pauw-Hall, secondary ion mass spectroscopy and photoluminescence measurements. Good agreement in terms of dependence of mobility and Burstein-Moss shift shift on doping concentration in samples doped by the two different techniques was obtained. Amphoteric behavior of Si was observed at doping concentrations higher than {approx}2.9x10{sup 19} cm{sup -3} in both delta- and volume-doped samples. Degradation of InGaAs crystalline quality occurred in samples with Si concentrations higher than {approx}4x10{sup 19} cm{sup -3}.

36 MATERIALS SCIENCE↗

Time resolved studies of catastrophic optical mirror damage in red-emitting laser diodes

We have observed the changing light intensity during catastrophic optical mirror damage (COMD) on the timescale of tens of nanoseconds using red-emitting AlGaInP quantum well based laser diodes. Using as-cleaved facets and this material system, which is susceptible to COMD, we recorded the drop in light intensity and the area of damage to the facet, as a function of current, for single, high current pulses. We found that in the current range up to 40 A, the total COMD process up to the drop of light intensity to nonlasing levels takes place on a timescale of hundreds of nanoseconds, approaching a limiting value of 200 ns, and that the measured area of facet damage showed a clear increase with drive current. Using a straightforward thermal model, we propose an explanation for the limiting time at high currents and the relationship between the time to COMD and the area of damaged facet material.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effects of fluorine incorporation into HfO{sub 2} gate dielectrics on InP and In{sub 0.53}Ga{sub 0.47}As metal-oxide-semiconductor field-effect-transistors

In this work, the effects of fluorine (F) incorporation on electrical characteristics of HfO{sub 2}/InP and HfO{sub 2}/In{sub 0.53}Ga{sub 0.47}As gate stack are presented. F had been introduced into HfO{sub 2} gate dielectric by postgate CF{sub 4} plasma treatment, which was confirmed by x-ray photoelectron spectroscopy analysis and a secondary ion mass spectrometry technique. Compared to the control sample, fluorinated samples had great improvements in subthreshold swing, hysteresis, the normalized extrinsic transconductance, and the normalized drain current. These improvements can be attributed to the reduction in fixed charge in the HfO{sub 2} bulk and less interface trap density at the HfO{sub 2}/III-V interface.

36 MATERIALS SCIENCE↗

InAs quantum wire induced composition modulation in an In{sub 0.53}Ga{sub 0.37}Al{sub 0.10}As barrier layer grown on an InP substrate

Composition modulations are observed by transmission electron microscopy in In{sub 0.53}Ga{sub 0.37}Al{sub 0.10}As barrier layers that overgrow both single- and multilayer InAs quantum wire structures grown on an InP substrate. Indium-rich (gallium-deficient) regions were observed in the region of the barrier layer lying directly above individual quantum wires, while indium-deficient (gallium-rich) regions were detected in the barrier above the gaps between adjacent underlying quantum wires. The magnitude of such modulation was typically 7% (atomic percent) for both indium and gallium as estimated from the energy dispersive x-ray analysis. The origin of such composition modulations was determined by modeling the chemical potential distribution for indium and gallium on the growth front of the barrier layer at the initial capping stage of the quantum wires with finite element simulations. It is found that the number and positions of the indium-rich regions are determined by the combined effects of strain and surface energy distributions on the barrier material capping the quantum wires. Moreover the estimated magnitudes of the composition modulation for both indium and gallium from the finite element models are in good agreement with the experimental observations. This method provides a simple way to understand the origin of, and to estimate the magnitude of the quantum wire-induced composition modulation in the barrier layer.

36 MATERIALS SCIENCE↗

Impact of ion-implantation-induced band gap engineering on the temperature-dependent photoluminescence properties of InAs/InP quantum dashes

We report on the effects of the As/P intermixing induced by phosphorus ion implantation in InAs/InP quantum dashes (QDas) on their photoluminescence (PL) properties. For nonintermixed QDas, usual temperature-dependent PL properties characterized by a monotonic redshift in the emission band and a continual broadening of the PL linewidth as the temperature increases, are observed. For intermediate ion implantation doses, the inhomogeneous intermixing enhances the QDas size dispersion and the enlarged distribution of carrier confining potential depths strongly affects the temperature-dependent PL properties below 180 K. An important redshift in the PL emission band occurs between 10 and 180 K which is explained by a redistribution of carriers among the different intermixed QDas of the ensemble. For higher implantation doses, the homogeneous intermixing reduces the broadening of the localized QDas state distribution and the measured linewidth temperature behavior matches that of the nonintermixed QDas. An anomalous temperature-dependent emission energy behavior has been observed for extremely high implantation doses, which is interpreted by a possible QDas dissolution.

36 MATERIALS SCIENCE↗

Multiple growths of epitaxial lift-off solar cells from a single InP substrate

We demonstrate multiple growths of flexible, thin-film indium tin oxide-InP Schottky-barrier solar cells on a single InP wafer via epitaxial lift-off (ELO). Layers that protect the InP parent wafer surface during the ELO process are subsequently removed by selective wet-chemical etching, with the active solar cell layers transferred to a thin, flexible plastic host substrate by cold welding at room temperature. The first- and second-growth solar cells exhibit no performance degradation under simulated Atmospheric Mass 1.5 Global (AM 1.5G) illumination, and have a power conversion efficiency of {eta}{sub p}=14.4{+-}0.4% and {eta}{sub p}=14.8{+-}0.2%, respectively. The current-voltage characteristics for the solar cells and atomic force microscope images of the substrate indicate that the parent wafer is undamaged, and is suitable for reuse after ELO and the protection-layer removal processes. X-ray photoelectron spectroscopy, reflection high-energy electron diffraction observation, and three-dimensional surface profiling show a surface that is comparable or improved to the original epiready wafer following ELO. Wafer reuse over multiple cycles suggests that high-efficiency; single-crystal thin-film solar cells may provide a practical path to low-cost solar-to-electrical energy conversion.

36 MATERIALS SCIENCE↗