Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHASE STUDIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

A Phase I/II Radiation Dose Escalation Study With Concurrent Chemotherapy for Patients With Inoperable Stages I to III Non-Small-Cell Lung Cancer: Phase I Results of RTOG 0117

Purpose: In preparation for a Phase III comparison of high-dose versus standard-dose radiation therapy, this Phase I/II study was initiated to establish the maximum tolerated dose of radiation therapy in the setting of concurrent chemotherapy, using three-dimensional conformal radiation therapy for non-small-cell lung cancer. Methods and Materials: Eligibility included patients with histologically proven, unresectable Stages I to III non-small-cell lung cancer. Concurrent chemotherapy consisted of paclitaxel, 50 mg/m{sup 2}, and carboplatin, AUC of 2, given weekly. The radiation dose was to be sequentially intensified by increasing the daily fraction size, starting from 75.25 Gy/35 fractions. Results: The Phase I portion of this study accrued 17 patients from 10 institutions and was closed in January 2004. After the initial 8 patients were accrued to cohort 1, the trial closed temporarily on September 26, 2002, due to reported toxicity. Two acute treatment-related dose-limiting toxicities (DLTs) were reported at the time: a case of grade 5 and grade 3 radiation pneumonitis. The protocol, therefore, was revised to de-escalate the radiation therapy dose (74 Gy/37 fractions). Patients in cohort 1 continued to develop toxicity, with 6/8 (75%) patients eventually developing grade >=3 events. Cohort 2 accrued 9 patients. There was one DLT, a grade 3 esophagitis, in cohort 2 in the first 5 patients (1/5 patients) and no DLTs for the next 2 patients (0/2 patients). Conclusions: The maximum tolerated dose was determined to be 74 Gy/37 fractions (2.0 Gy per fraction) using three-dimensional conformal radiation therapy with concurrent paclitaxel and carboplatin therapy. This dose level in the Phase II portion has been well tolerated, with low rates of acute and late lung toxicities.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Collective modes in the color flavor-locked phase.

We study the low-energy effective action for some collective modes of the color flavor-locked (CFL) phase of QCD. This phase of matter has long been known to be a superfluid because by picking a phase its order parameter breaks the quark-number U(1){sub B} symmetry spontaneously. We consider the modes describing fluctuations in the magnitude of the condensate, namely the Higgs mode, and in the phase of the condensate, namely the Nambu-Goldstone (NG) (or Anderson-Bogoliubov) mode associated with the breaking of U(1){sub B}. By employing as microscopic theory the Nambu-Jona-Lasinio model, we reproduce known results for the Lagrangian of the NG field to the leading order in the chemical potential and extend such results evaluating corrections due to the gap parameter. Moreover, we determine the interaction terms between the Higgs and the NG field. This study paves the way for a more reliable study of various dissipative processes in rotating compact stars with a quark matter core in the CFL phase.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Concomitant Chemoradiotherapy With Mitomycin C and Cisplatin in Advanced Unresectable Carcinoma of the Head and Neck: Phase I-II Clinical Study

Purpose: To evaluate the toxicity and efficacy of concomitant chemoradiotherapy with mitomycin C and cisplatin in the treatment of advanced unresectable squamous cell carcinoma of the head and neck. Patients and Methods: Treatment consisted of conventional radiotherapy (70 Gy in 35 fractions), mitomycin C 15 mg/m{sup 2} IV, applied after the delivery of 10 Gy, and cisplatin at an initial dose of 10 mg/m{sup 2}/d IV, applied during the last 10 fractions of irradiation ('chemoboost'). The cisplatin dose was escalated with respect to the toxic side effects by 2 mg/m{sup 2}/d up to the maximum tolerated dose (MTD) or at the most 14 mg/m{sup 2}/d (Phase I study), which was tested in the subsequent Phase II study. Results: All 36 patients had Stage T4 and/or N3 disease, and the majority had oropharyngeal (50%) or hypopharyngeal (39%) primary tumors. Six patients were treated at each of the three cisplatin dose levels tested (Phase I study). Dose-limiting toxicity was not reached even at 14 mg/m{sup 2}/d of cisplatin, which was determined as the MTD and tested in an additional 18 patients (Phase II study). After a median follow-up time of 48 months, 4-year locoregional control, failure-free, and overall survival rates were 30%, 14%, and 20%, respectively. In 24 patients treated at the cisplatin dose level of 14 mg/m{sup 2}/d, the corresponding rates were 40%, 20%, and 22%, respectively. Conclusion: Concomitant chemoradiotherapy with mitomycin C and cisplatin 'chemoboost' at 14 mg/m{sup 2}/d is feasible, with encouraging survival results if the extremely poor disease profile of the treated patients is considered.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Comprehensive study of the magnetic phase transitions in Tb 3 Co combining thermal, magnetic and neutron diffraction measurements

A comprehensive study of the magnetic phase transitions in Tb 3 Co has been undertaken combining different techniques. Using single crystal neutron diffraction in the paramagnetic state a weak crystal structure distortion from the room temperature orthorhombic structure of the Fe 3 C type described with the Pnma space group toward structure with lower symmetry has been observed with cooling below 100 K. At 81 K there is a second order phase transition to an antiferromagnetic incommensurate phase with the propagation vector k = (0.155, 0, 0). As derived from thermal diffusivity measurements, the critical exponents for this transition are very close to the 3D-Heisenberg universality class, proving that the magnetic interactions are short-range but with a deviation from perfect isotropy due to crystal field effects. At T 2 ≈ 70 K there is another magnetic phase transition to a ferromagnetic state whose character is shown to be weakly first order. The low temperature magnetic state has a non-coplanar ferromagnetic structure with strong ferromagnetic components of Tb magnetic moments along the crystallographic c-axis. The application of an external magnetic field B = 2 T along the crystallographic c-axis suppresses the incommensurate antiferromagnetic phase and gives rise to the ferromagnetic phase. The magnetic entropy peak change as well as the refrigerant capacity indicate that Tb 3 Co is a competitive magnetocaloric material in this temperature range.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

PRELIMINARY STUDY OF CERAMICS FOR IMMOBILIZATION OF ADVANCED FUEL CYCLE REPROCESSING WASTES

The Savannah River National Laboratory (SRNL) developed a series of ceramic waste forms for the immobilization of Cesium/Lanthanide (CS/LN) and Cesium/Lanthanide/Transition Metal (CS/LN/TM) waste streams anticipated to result from nuclear fuel reprocessing. Simple raw materials, including Al{sub 2}O{sub 3}, CaO, and TiO{sub 2} were combined with simulated waste components to produce multiphase ceramics containing hollandite-type phases, perovskites (particularly BaTiO{sub 3}), pyrochlores, zirconolite, and other minor metal titanate phases. Identification of excess Al{sub 2}O{sub 3} via X-ray Diffraction (XRD) and Scanning Electron Microscopy with Energy Dispersive Spectroscopy (SEM/EDS) in the first series of compositions led to a Phase II study, with significantly reduced Al{sub 2}O{sub 3} concentrations and increased waste loadings. Three fabrication methodologies were used, including melting and crystallizing, pressing and sintering, and Spark Plasma Sintering (SPS), with the intent of studying phase evolution under various sintering conditions. XRD and SEM/EDS results showed that the partitioning of the waste elements in the sintered materials was very similar, despite varying stoichiometry of the phases formed. The Phase II compositions generally contained a reduced amount of unreacted Al{sub 2}O{sub 3} as identified by XRD, and had phase assemblages that were closer to the initial targets. Chemical composition measurements showed no significant issues with meeting the target compositions. However, volatilization of Cs and Mo was identified, particularly during melting, since sintering of the pressed pellets and SPS were performed at lower temperatures. Partitioning of some of the waste components was difficult to determine via XRD. SEM/EDS mapping showed that those elements, which were generally present in small concentrations, were well distributed throughout the waste forms. Initial studies of radiation damage tolerance using ion beam irradiation at Los Alamos National Laboratory (LANL) showed little if any modification of the material after irradiation. Additional study in this area is needed. Chemical durability was briefly studied using the Product Consistency Test (PCT). Most of the elements measured were retained by the ceramic waste forms, indicating good chemical durability. Cs, Mo, and Rb were released at somewhat higher rates as compared to the matrix components, although benchmark compositions and additional characterization are needed in order to qualify the PCT results.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

An in-situ neutron diffraction study of a multi-phase transformation and twinning-induced plasticity steel during cyclic loading

In-situ neutron diffraction during cyclic tension-compression loading (∼+3.5% to −2.8%) of a 17Mn-3Al-2Si-1Ni-0.06C steel that exhibits concurrent transformation and twinning -induced plasticity effects indicated a significant contribution of intragranular back stresses to the observed Bauschinger effect. Rietveld analysis revealed a higher rate of martensitic transformation during tension compared to compression. Throughout cycling, α′-martensite exhibited the highest phase strains such that it bears an increasing portion of the macroscopic load as its weight fraction evolves. On the other hand, the ε-martensite strain remained compressive as it accommodated most of the internal strains caused by the shape misfit associated with the γ→ε and/or ε→α′ transformations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-temperature X-ray diffraction study of crystallization and phase segregation on spinel-type lithium manganese oxides

To study crystallization process of spinel-type Li{sub 1+x}Mn{sub 2-x}O{sub 4}, in-situ high-temperature X-ray diffraction technique (HT-XRD) was utilized for the mixture consisting of Li{sub 2}CO{sub 3} and Mn{sub 2}O{sub 3} as starting material in the temperature range of 25-700 deg. C. In-situ HT-XRD analysis directly revealed that crystallization process of Li{sub 1+x}Mn{sub 2-x}O{sub 4} was significantly affected by the difference in the Li/Mn molar ratio in the precursor. Single phase of stoichiometric LiMn{sub 2}O{sub 4} formed at 700 deg. C. The formation of single phase of spinel was achieved at the lower temperature than the stoichiometric sample as Li/Mn molar ratio in the precursor increased. Lattice parameter of the stoichiometric LiMn{sub 2}O{sub 4} at 25 deg. C was 8.24 A and expanded to 8.31 A at 700 deg. C, which corresponds to the approximately 3% expansion in the unit cell volume. From the slope of the lattice parameter change as a function of temperatures, linear thermal expansion coefficient of the stoichiometric LiMn{sub 2}O{sub 4} was calculated to be 1.2x10{sup -5} deg. C{sup -1} in this temperature range. When the Li/Mn molar ratio in Li{sub 1+x}Mn{sub 2-x}O{sub 4} increased (x > 0.1), the spinel phase segregated into the Li{sub 1+y}Mn{sub 2-y}O{sub 4} (x > y) and Li{sub 2}MnO{sub 3} during heating, which involved the oxygen loss from the materials. During the cooling process from 700 deg. C, and the segregated phase merged into Li{sub 1+x}Mn{sub 2-x}O{sub 4} with oxygen incorporation. Such trend directly observed by in-situ HT-XRD was supported by thermal gravimetric analysis as reversible weight (oxygen) loss/gain at higher temperature (500-700 deg. C). - Graphical abstract: Non-linear variation of lattice parameters of the Li excess LiMn{sub 2}O{sub 4} spinels was observed during cooling process from 700 to 25 deg. C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase transformation and wear studies of plasma sprayed yttria stabilized zirconia coatings containing various mol% of yttria

Plasma sprayable grade zirconia powders doped with various mol% of yttria (0, 2, 3, 4, 6, 8 and 12 mol%) were synthesized by a chemical co-precipitation route. The coprecipitation conditions were adjusted such that the powders possessed good flowability in the as calcined condition and thus avoiding the agglomeration step like spray drying. Identical plasma spray parameters were used for plasma spraying all the powders on stainless steel plates. The powders and plasma sprayed coatings were characterized by X-ray diffractometry, Scanning Electron Microscopy and Raman spectroscopy. Zirconia powders are susceptible to phase transformations when subjected to very high temperatures during plasma spraying and XRD is insensitive to the presence of some non crystalline phases and hence Raman spectroscopy was used as an important tool. The microstructure of the plasma sprayed coatings showed a bimodal distribution containing fully melted and unmelted zones. The microhardness and wear resistance of the plasma sprayed coatings were determined. Among the plasma sprayed coatings, 3 mol% yttria stabilized zirconia coating containing pure tetragonal zirconia showed the highest wear resistance. - Research Highlights: {yields} Preparation plasma sprayable YSZ powders without any agglomeration process and plasma spraying {yields} Phase transformation studies of plasma sprayed YSZ coatings by XRD and Raman spectroscopy {yields} Microstructure of the plasma sprayed coatings exhibited bimodal distribution {yields} Plasma sprayed 3 mol% YSZ coating exhibited the highest wear resistance {yields} Higher wear resistance is due to the higher fracture toughness of tetragonal 3 mol% YSZ phase.

36 MATERIALS SCIENCE↗

Asymptotic growth of the 4d $ \mathcal{N} $ = 4 index and partially deconfined phases

We study the Cardy-like asymptotics of the 4d N = 4 index and demonstrate the existence of partially deconfined phases where the asymptotic growth of the index is not as rapid as in the fully deconfined case. We then take the large-N limit after the Cardy-like limit and make a conjecture for the leading asymptotics of the index. While the Cardy-like behavior is derived using the integral representation of the index, we demonstrate how the same results can be obtained using the Bethe ansatz type approach as well. In doing so, we discover new non-standard solutions to the elliptic Bethe ansatz equations including continuous families of solutions for SU(N) theory with N ≥ 3. Here, we argue that the existence of both standard and continuous non-standard solutions has a natural interpretation in terms of vacua of N = 1* theory on R 3 × S 1 .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Experimental study of high-k turbulence during an energy confinement degradation phase in EAST ohmic plasmas

In this paper, we present experimental studies of both high-k(r) ( cm(-1), and , respectively; ) and high- ( cm(-1), and , respectively; ) turbulence behavior during an ohmic energy confinement degradation phase in experimental advanced superconducting tokamak (EAST). High-k(r) turbulence from density fluctuation at and high- turbulence from density fluctuation at -0.97 were measured by tangential and poloidal CO2 laser collective scattering diagnostics, respectively. Note that k(r), , and are radial wavenumber, poloidal wavenumber, perpendicular wavenumber and ion gyroradius at electron temperature, respectively. Both high-k(r)/ turbulence power and energy confinement time are found to be temporally correlated to line-averaged electron density n(e) in the plasma current flat-top phase (I-p = 0.4 MA): when the n(e) shows continuous increase/decrease, the high-k(r)/ turbulence power increases/decreases correspondingly and the shows corresponding decrease/increase; the stable n(e) is related to stable both and high-k(r)/ turbulence power. Statistical results of high-k(r)/ turbulence power versus further imply that high-k(r)/ turbulence shows a strong correlation with plasma energy confinement degradation in high line-averaged n(e) condition, but high-k(r) and high- turbulence have relatively weak and no dependence on the transition between linear range in low-n(e) condition and energy confinement degradation in the high-n(e) condition, respectively. Moreover, profiles of electron temperature T-e and n(e) as well as their normalized gradients in a part of high- density fluctuation measurement region also have been given to qualitatively explain the enhancement of turbulence power with the increase of line-averaged n(e).

EAST tokamak↗

A pseudo-3D approach based on electron backscatter diffraction and backscatter electron imaging to study the character of phase boundaries between Mg and long period stacking ordered phase in a Mg–2Y–Zn alloy

In Mg–2 at.% Y–1 at.% Zn alloys, the LPSO (Long Period Stacking Ordered) phase is important to improve mechanical properties of the material. The aim of this paper is to present a study on the phase boundary character in these two-phase alloys. Using EBSD pattern analysis it was found that the 24R structure is the dominant LPSO phase structure in the current alloy. The phase boundary character between the Mg matrix and the LPSO phase was investigated using an improved pseudo-3D EBSD (electron backscatter diffraction) technique in combination with BSE or SE (backscatter or secondary electron) imaging. A large amount of very low-angle phase boundaries was detected. The (0 0 0 2) plane in the Mg matrix which is parallel to the (0 0 0 24) plane in the LPSO phase was found to be the most frequent plane for these phase boundaries. This plane is supposed to be the habit plane of the eutectic co-solidification of the Mg matrix and the LPSO phase. - Highlights: • It is shown that for the investigated alloy the LPSO phase has mainly 24R crystal structure. • A new method is presented which allows accurate determination of the 5-parameter grain or phase boundary character. • It is found that the low-angle phase boundaries appearing in the alloy all have basal phase boundary planes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Relationships between Immersion Freezing and Crystal Habit for Arctic Mixed-Phase Clouds—A Numerical Study

Abstract The number concentration of ice particles in Arctic mixed-phase clouds is a major controlling factor of cloud lifetime. The relationships between ice nucleation mode and ice crystal habit development are not yet constrained by observations. This study uses a habit-predicting microphysical scheme within a 3D large-eddy simulation model to evaluate the relationship between immersion freezing and ice habit in a simulated Arctic mixed-phase cloud case. Three immersion freezing parameterizations are considered: a volume-dependent freezing scheme (VF), a parameterization limited to activated droplets (C-AC), and a parameterization limited to coarse aerosol particles (C-CM). Both C-AC and C-CM are based on classical nucleation theory. The freezing rate with VF is found to be greater in downdraft regions than in updraft regions due to the downdraft having a higher number concentration of large droplets. The C-AC cases show active freezing of small droplets near cloud top, whereas in the C-CM cases, mainly the 8–32- μ m-sized droplets freeze in updraft regions near the cloud base. Because the initial crystal size is assumed to affect the axis ratio of hexagonal plates, the VF cases produce crystals with larger axis ratios, resulting in smaller mode radii than the C-AC cases. In all cases, irregular polycrystals dominate near cloud top and a band-like structure develops within the cloud, which qualitatively agrees with previous observations. In the VF and C-CM cases, unactivated large droplets arising from coarse-mode aerosol particles contributed significantly to the freezing rate, producing an important influence on crystal habit.

54 ENVIRONMENTAL SCIENCES↗

Experimental study on the effect of nozzle hole-to-hole angle on the near-field spray of diesel injector using fast X-ray phase-contrast imaging

Fuel atomization and vaporization process play a critical role in determining the engine combustion and emission. The primary near-nozzle breakup is the vital link between the fuel emerging from the nozzle and the fully atomized spray. In this study, the near-nozzle spray characteristics of diesel injector with different umbrella angle (UA) were investigated using high-speed X-ray phase-contrast imaging and quantitative image processing. A classic ‘dumbbell’ profile of spray width (SW) composed of three stages: opening stage, semisteady stage and closing stage. The SW peak of two-hole injectors was more than twice of that of single-hole injector at the opening and closing stages, corresponding to the hollow-cone spray. This indicated the vortex flow was formed with the increase of the UA. The higher injection pressure had little influence on the SW while led to earlier breakup closer to the nozzle. Significant fuel effect on the SW at higher needle lift was found. However, this effect could be neglect at lower needle lift due to the leading role of internal flow and cavitation on the near-field spray characteristics. In addition, the morphology-based breakup process was observed, which highlighted the important effect of internal flow on the spray development. The possibility of using hollow-cone spray in diesel injector was also discussed.

biodiesel↗

Bent core liquid crystal elastomers

Liquid crystal (LC) elastomers with bent-core side-groups incorporate the properties of bent-core liquid crystals in a flexible and self-supporting polymer network. Bent-core liquid crystal elastomers (BCEs) with uniform alignment were prepared by attaching a reactive bent-core LC to poly(hydrogenmethylsiloxane) and crosslinking with a divinyl crosslinker. Phase behavior studies indicate a nematic phase over a wide temperature range that approaches room temperature, and thermoelastic measurements show that these BCEs can reversibly change their length by more than a factor of two upon heating and cooling. Small-angle X-ray scattering studies reveal multiple, broad low-angle peaks consistent with short-range smectic C order of the bent-core side groups. A comparison of these patterns with predictions of a Landau model for short-range smectic C order shows that the length scale for smectic ordering in BCEs is similar to that seen in pure bent-core LCs. The combination of rubber elasticity and smectic ordering of the bent-core side groups suggests that BCEs may be promising materials for sensing, actuating, and other advanced applications.

36 MATERIALS SCIENCE↗

Dehydration of 1-octadecanol over H-BEA: A combined experimental and computational study

Liquid phase dehydration of 1-octdecanol, which is intermediately formed during the hydrodeoxygenation of microalgae oil, has been explored in a combined experimental and computational study. The alkyl chain of C18 alcohol interacts with acid sites during diffusion inside the zeolite pores, resulting in an inefficient utilization of the Brønsted acid sites for samples with high acid site concentrations. The parallel intra- and inter- molecular dehydration pathways having different activation energies pass through alternative reaction intermediates. Formation of surface-bound alkoxide species is the rate-limiting step during intramolecular dehydration, whereas intermolecular dehydration proceeds via a bulky dimer intermediate. Octadecene is the primary dehydration product over H-BEA at 533 K. Despite of the main contribution of Brønsted acid sites towards both dehydration pathways, Lewis acid sites are also active in the formation of dioctadecyl ether. The intramolecular dehydration to octadecene and cleavage of the intermediately formed ether, however, require strong BAS. L. Wang, D. Mei and J. A. Lercher, acknowledge the partial support from the US Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. Pacific Northwest National Laboratory (PNNL) is a multiprogram national laboratory operated for DOE by Battelle. Computing time was granted by the grand challenge of computational catalysis of the William R. Wiley Environmental Molecular Sciences Laboratory (EMSL) and by the National Energy Research Scientific Computing Center (NERSC). EMSL is a national scientific user facility located at Pacific Northwest National Laboratory (PNNL) and sponsored by DOE’s Office of Biological and Environmental Research.

1-octadecanol↗

Pressure-induced phase transition of calcite and aragonite: A first principles study

The thermodynamic phase stabilities of calcite and aragonite have been investigated from lattice vibrational analyses based on first-principles calculations. Different pressure dependences in phonon feature were found between the two polymorphs, suggesting different physical origins of the pressure-induced phase transitions. In the most stable phase in calcite (calcite I), an imaginary phonon mode consisting of rotation of CO{sub 3} ions with slight displacement of Ca ions appears at the F point in the Brillouin zone above 0.8 GPa. Such a soft mode means that external pressure induces the lattice-dynamical instability of calcite I leading to the phase transition to calcite II. On the other hand, the origin of the phase transition in aragonite is not due to such a lattice-dynamical instability. The estimated thermodynamical properties indicate that a first-order phase transition occurs between aragonite and post-aragonite at 34.7 GPa, coinciding with the reported experimental value at room temperature (35 GPa).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dissociative electron attachment studies of gas-phase acetic acid using a velocity map imaging technique

Abstract Advancing instrumentation to explore dissociative electron attachment (DEA) studies allows previously unattainable information to be acquired. Using a newly constructed velocity map imaging spectrometer, we revisited a study on DEA to gas-phase acetic acid. We discuss possible fragmentation channels and compared the corresponding ion yields with previous high electron-energy resolution results. We focus on the channels occurring at higher energies, particularly near 10 eV, and calculate their thermodynamic thresholds. Moreover, we expand previous studies and perform time-sliced imaging near the 10 eV resonance to obtain the kinetic energy distribution of the fragment ions.

Optics↗