Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Optical constants”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

James Webb Space Telescope: The First Light Machine

NASA James Webb Space Telescope (JWST) will search for the first luminous objects of the Universe to help answer fundamental questions about how the Universe came to look like it does today. At 6.5 meters in diameter, JWST will be the world's largest space telescope. Its architecture, e.g. aperture, wavelength range and operating temperature, is driven by JWST's science objectives. Introduction: Scheduled to start its 5 year mission after 2018, JWST will study the origin and evolution of galaxies, stars and planetary systems. Its science mission is to: Identify the first bright objects that formed in the early Universe, and follow the ionization history. Determine how galaxies form. Determine how galaxies and dark matter, including gas, stars, metals, overall morphology and active nuclei evolved to the present day. Observe the birth and early development of stars and the formation of planets. And, study the physical and chemical properties of solar systems for the building blocks of Life. Principle: To accomplish the JWST science objectives requires a larger aperture infrared cryogenic space telescope. A large aperture is required because the objects are very faint. The infrared spectral range is required because the objects are so far away that their ultraviolet and visible wavelength spectral lines are red-shifted into the infrared. Because the telescope is infrared, it needs to be cryogenic. And, because of the telescope is infrared, it must operate above the Earth's atmosphere, i.e. in space. JWST is probably the single most complicated mission that humanity has attempted. It is certainly the most difficult optical fabrication and testing challenge of our generation. The JWST 6.5 m diameter primary mirror is nearly a parabola with a conic constant of -0.9967 and radius of curvature at 30K of 15.880 m. The primary mirror is divided into 18 segments with 3 different prescriptions; each with its own off-axis distance and aspheric departure. The radius of curvature for all 18 segments must match to +/- 0.150 mm at 30K. JWST is diffraction limited at 2 micrometers which translates into a transmitted wavefront specification of 156 nm rms. Of that amount, 50 nm rms is allocated to the primary mirror. Each segment is allocated 22 nm rms surface error. At the start of the JWST program, the capability to make such a mirror did not exist. In 1996, NASA began a systematic and comprehensive mirror technology development effort which resulted in JWST. This program resulted in a qualified mirror fabrication process being approved in 2006. Today, all JWST primary mirror segments meet their requirements and are on schedule for a 2018 launch. The next step is system level assembly, integration and test. Ambient tests will be conducted at Goddard Space Flight Center and cryogenic system level testing will be performed in Chamber A at the Johnson Space Center.

Stahl, H. Philip↗
NASA NTRS1990

Optical property measurements as a diagnostic tool for control of materials processing in space and on Earth

A new method is described, including results, to measure, control, and follow containerless processing in ground based levitators. This technique enables instantaneous optical property measurements from a transient solid or liquid surface concurrent with true temperature measurement. This was used successfully as a diagnostic tool to follow processing of Al, Si, and Ti during electromagnetic levitation. Experiments on Al show the disappearance of the oxide (emittance 0.33) at ca. 1300 C leaving a liquid surface with an emittance of 0.06. Electromagnetic levitation of silicon shows a liquid with a constant emittance (0.2) but with a solid whose emittance decreases very rapidly with increasing temperature. Consequently, the processing of materials at high temperatures can be controlled quite well through the control of surface optical properties.

Krishnan, Shankar↗
NASA NTRS2004

Nucleation in Synoptically Forced Cirrostratus

Formation and evolution of cirrostratus in response to weak, uniform and constant synoptic forcing is simulated using a one-dimensional numerical model with explicit microphysics, in which the particle size distribution in each grid box is fully resolved. A series of tests of the model response to nucleation modes (homogeneous-freezing-only/heterogeneous nucleation) and heterogeneous nucleation parameters are performed. In the case studied here, nucleation is first activated in the prescribed moist layer. A continuous cloud-top nucleation zone with a depth depending on the vertical humidity gradient and one of the nucleation parameters is developed afterward. For the heterogeneous nucleation cases, intermittent nucleation zones in the mid-upper portion of the cloud form where the relative humidity is on the rise, because existent ice crystals do not uptake excess water vapor efficiently, and ice nuclei (IN) are available. Vertical resolution as fine as 1 m is required for realistic simulation of the homogeneous-freezing-only scenario, while the model resolution requirement is more relaxed in the cases where heterogeneous nucleation dominates. Bulk microphysical and optical properties are evaluated and compared. Ice particle number flux divergence, which is due to the vertical gradient of the gravity-induced particle sedimentation, is constantly and rapidly changing the local ice number concentration, even in the nucleation zone. When the depth of the nucleation zone is shallow, particle number concentration decreases rapidly as ice particles grow and sediment away from the nucleation zone. When the depth of the nucleation zone is large, a region of high ice number concentration can be sustained. The depth of nucleation zone is an important parameter to be considered in parametric treatments of ice cloud generation.

Lin, R.-F.↗
DOE OSTI2021

A Bimodal Diagnostic Cloud Fraction Parameterization. Part II: Evaluation and Resolution Sensitivity

A wide range of approaches exists to account for subgrid cloud variability in regional simulations of the atmosphere. This paper addresses the following questions: 1) Is there still benefit in representing subgrid variability of cloud in convection-permitting simulations? 2) What is the sensitivity to the cloud fraction parameterization complexity? 3) Are current cloud fraction parameterizations scale-aware across convection-permitting resolutions? These questions are addressed for regional simulations of a 6-week observation campaign in the U.S. southern Great Plains. Particular attention is given to a new diagnostic cloud fraction scheme with a bimodal subgrid saturation-departure PDF, described in Part I. The model evaluation is performed using ground-based remote sensing synergies, satellite-based retrievals, and surface observations. It is shown that not using a cloud fraction parameterization results in underestimated cloud frequency and water content, even for stratocumulus. The use of a cloud fraction parameterization does not guarantee improved cloud property simulations, however. Diagnostic and prognostic cloud schemes with a symmetric subgrid saturation-departure PDF underestimate cloud fraction and cloud optical thickness, and hence overestimate surface shortwave radiation. These schemes require empirical bias-correction techniques to improve the cloud cover. The new cloud fraction parameterization, introduced in Part I, improves cloud cover, liquid water content, cloud-base height, optical thickness, and surface radiation compared to schemes reliant on a symmetric PDF. Furthermore, cloud parameterizations using turbulence-based, rather than prescribed constant subgrid variances, are shown to be more scale-aware across convection-permitting resolutions.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1982

Near-infrared photometry of distant radio galaxies - Spectral flux distributions and redshift estimates

Calculations modeling the effects of stellar evolution on the observed colors of elliptical galaxies suggest that the shape of their spectra should remain almost constant in the red and near-infrared for red shifts greater than two. In order to test this idea, JHK photometry of optically faint radio source identifications believed to be faint elliptical galaxies were carried out. Photometric redshift estimates have been made using three different models: a nonevolving elliptical galaxy spectrum, an evolving spectrum based on one of Bruzual's calculations, and an empirical model derived from photometry of distant elliptical galaxies. Redshifts greater than 0.5 are systematically under-estimated by the first two models and for galaxies whose colors are not consistent with the models, deviations occur not only in the optical bands but also in the infrared. The difficulties are not resolved by the addition of a quasar-like nucleus to the galaxies.

Puschell, J. J.↗
NASA NTRS1987

Radiative cooling of a layer with nonuniform velocity - A separable solution

Analyzed here is the cooling of a flowing plane layer filled with hot particles or liquid droplets that emit, absorb, and scatter radiation. The velocity distribution is nonuniform across the layer and the specified shape of this distribution affects the layer temperature distribution and emittance. The velocity distribution determined is one that will cause the layer to cool at a uniform temperature. Thus, if the layer initially has a uniform temperature, it will retain the same emittance throughout its length. A separable solution is found that applies in a 'fully developed' region following an initial cooling length. In this developed region, the solution shows that there is a constant emittance based on the local heat loss and local bulk mean layer temperature. This emittance is a function of the velocity distribution, optical thickness, and scattering albedo.

Siegel, Robert↗
NASA NTRS1990

A radio optical reference frame. I - Precise radio source positions determined by Mark III VLBI - Observations from 1979 to 1988 and a tie to the FK5

Observations from 600 Mark III VLBI experiments from 1979 to 1988, resulting in 237,681 acceptable pairs of group delay and phase delay rate observations, have been used to derive positions of 182 extragalactic radio sources with typical formal standard errors less than 1 mas. The sources are distributed fairly evenly above delta = -30 deg, and 70 sources have delta greater than 0 deg. Analysis with different troposphere models, as well as internal and external comparisons, indicates that a coordinate frame defined by this set of radio sources should be reliable at the 1 mas level. The right ascension zero point of this reference frame has been aligned with the FK5 by using the optical positions of 28 extragalactic radio sources whose positions are on the FK5 system. Because of known defects in the knowledge of astronomical constants, daily nutation offsets in longitude and obliquity were determined relative to an arbitrary reference day in the set of experiments.

Ma, C.↗
NASA NTRS1993

The fundamentals and futures of removable mass storage alternatives

This article reflects my view of how the storage products have been introduced into the marketplace, where they came from, and where others will continue to come from in the future. My corporate goal is to be a resource for those searching for removable solutions to mass storage problems. My introduction to optical storage occurred a few months before signing a non-disclosure agreement with FileNet on 8 Aug. 1983. By 87 or 88, as the optical craze was getting more popular, I started looking for similar or complementary storage technologies. I am still looking and my research is constantly turning up new entrants into this field. Due to the scope of the coverage in this field, this article does not dwell on any single technology. The goal is to provide information that is not compiled in any other single source and focus on facts that are not commonly known. I have provided a few baseline assumptions to ensure the mathematical calculations remain consistent: (1) hard-copy 8.5 in x 11 in documents which are scanned at 200 dots per inch (dpi) and compressed at a ratio of 10:1 result in a document image which requires an average of 50 Kilobytes (KB) of storage; (2) an average ASCII page requires 2 KB of storage; (3) an average flle cabinet drawer can hold 2500 pieces of paper; (4) one GB of storage can hold an average of 20,000 document images (a reel of 6250 tape holds 180 Megabytes (MB)).

Kempster, Linda↗
NASA NTRS1995

Simultaneous UV, optical and radio monitoring of the BL Lac object OJ 287 in March 1993

The BL Lacertae object OJ 287 was intensively monitored with the IUE satellite from 1993 March 15 to 20 in the 2000-3000 A wavelength region. The very low emission state of the source hampered the detection during part of the 23 performed exposures. The light curve at 2650 A constructed with the 11 best images exhibits a variable trend with a factor is less than or approximately 2 enhancement of the flux in about 3 hours. Simultaneous ground based observations show an optical flux variability of smaller amplitude, but correlated with the UV light curve without any apparent lag. The radio light curve is nearly constant. The UV emission state is the weakest observed in 15 years for this flaring blazard, being a factor of less than orapproximately 20 lower than the maximum recorded one.

Pian, E.↗
NASA NTRS1999

Rectangular Relief Diffraction Gratings for Coherent Lidar Beam Scanning

The application of specialized rectangular relief transmission gratings to coherent lidar beam scanning is presented. Two types of surface relief transmission grating approaches are studied with an eye toward potential insertion of a constant thickness, diffractive scanner where refractive wedges now exist. The first diffractive approach uses vertically oriented relief structure in the surface of an optical flat; illumination of the diffractive scanner is off-normal in nature. The second grating design case describes rectangular relief structure slanted at a prescribed angle with respect to the surface. In this case, illumination is normal to the diffractive scanner. In both cases, performance predictions for 2.0 micron, circularly polarized light at beam deflection angles of 30 or 45 degrees are presented.

Cole, H. J.↗
NASA NTRS2003

New Laboratory Methods for Characterizing the Immersion Factors for Irradiance

The experimental determination of the immersion factor, I(sub f)(lambda), of irradiance collectors is a requirement of any in-water radiometer. The eighth SeaWiFS Intercalibration Round-Robin Experiment (SIRREX-8) showed different implementations, at different laboratories, of the same I(sub f)(lambda) measurement protocol. The different implementations make use of different setups, volumes, and water types. Consequently, they exhibit different accuracies and require different execution times for characterizing an irradiance sensor. In view of standardizing the characterization of I(sub f)(lambda) values for in-water radiometers, together with an increase in the accuracy of methods and a decrease in the execution time, alternative methods are presented, and assessed versus the traditional method. The proposed new laboratory methods include: a) the continuous method, in which optical measurements taken with discrete water depths are substituted by continuous profiles created by removing the water from the water vessel at a constant flow rate (which significantly reduces the time required for the characterization of a single radiometer); and b) the Compact Portable Advanced Characterization Tank (ComPACT) method, in which the commonly used large tanks are replaced by a small water vessel, thereby allowing the determination of I(sub f)(lambda) values with a small water volume, and more importantly, permitting I(sub f)(lambda) characterizations with pure water. Intercomparisons between the continuous and the traditional method showed results within the variance of I(sub f) (lambda) determinations. The use of the continuous method, however, showed a much shorter realization time. Intercomparisons between the ComPACT and the traditional method showed generally higher I(sub f)(lambda) values for the former. This is in agreement with the generalized expectations of a reduction in scattering effects, because of the use of pure water with the ComPACT method versus the use of tap water with the traditional method.

Hooker, Stanford B.↗
NASA NTRS2011

CALIPSO Lidar Ratio Retrieval Over the Ocean

We are demonstrating on a few cases the capability of CALIPSO to retrieve the 532 nm lidar ratio over the ocean when CloudSat surface scattering cross section is used as a constraint. We are presenting the algorithm used and comparisons with the column lidar ratio retrieved by the NASA airborne high spectral resolution lidar. For the three cases presented here, the agreement is fairly good. The average CALIPSO 532 nm column lidar ratio bias is 13.7% relative to HSRL, and the relative standard deviation is 13.6%. Considering the natural variability of aerosol microphysical properties, this level of accuracy is significant since the lidar ratio is a good indicator of aerosol types. We are discussing dependencies of the accuracy of retrieved aerosol lidar ratio on atmospheric aerosol homogeneity, lidar signal to noise ratio, and errors in the optical depth retrievals. We are obtaining the best result (bias 7% and standard deviation around 6%) for a nighttime case with a relatively constant lidar ratio (in the vertical) indicative of homogeneous aerosol type

Josset, Damien B.↗
DOE OSTI2026

Spatiotemporal control of laser intensity using differentiable programming

Optical techniques for spatiotemporal control can produce laser pulses with custom amplitude, phase, or polarization structure. In nonlinear optics and plasma physics, the use of structured pulses typically follows a forward design approach, in which the efficacy of a known structure is analyzed for a particular application. Inverse approaches, in contrast, enable the discovery of new structures with the potential for superior performance. Here, an implementation of the unidirectional pulse propagation equation that supports automatic differentiation is combined with gradient-based optimization to design structured pulses with features that are advantageous for a range of nonlinear optical and plasma-based applications: (1) a longitudinally uniform intensity over an extended region, (2) a superluminal intensity peak that travels many Rayleigh ranges with constant duration, spot size, and amplitude, and (3) a laser pulse that ionizes a gas to form a uniform column of plasma. In the final case, optimizing the full spatiotemporal structure improves the performance by a factor of 15 compared to optimizing only spatial or only temporal structure, highlighting the advantage of spatiotemporal control.

automatic differentiation↗
NASA NTRS1981

Propagation path length variations due to bending of optical fibers

The geometric effect and material stress effects are included. Calculations are shown that put an upper limit on the expected phase shift in single mode fibers. The fractional change in propagation constant is presented. Moding effects in multimode fibers cause extraneous phase shifts of unusually high magnitude. This does not occur in single mode fibers, rendering them very insensitive to bending with a theoretical limit given by the above relation.

Lau, K. Y.↗
DOE OSTI2021

Directing Energy Transfer in Halide Perovskite–Chromophore Hybrid Assemblies

Directing the flow of energy and the nature of the excited states that are produced in nanocrystal–chromophore hybrid assemblies is crucial for realizing their photocatalytic and optoelectronic applications. Using a combination of steady-state and time-resolved absorption and photoluminescence (PL) experiments, we have probed the excited-state interactions in the CsPbBr 3 –Rhodamine B (RhB) hybrid assembly. PL studies reveal quenching of the CsPbBr 3 emission with a concomitant enhancement of the fluorescence of RhB, indicating a singlet-energy-transfer mechanism. Transient absorption spectroscopy shows that this energy transfer occurs on the ~200 ps time scale. To understand whether the energy transfer occurs through a Förster or Dexter mechanism, we leveraged facile halide-exchange reactions to tune the optical properties of the donor CsPbBr 3 by alloying with chloride. This allowed us to tune the spectral overlap between the donor CsPb(Br 1–x Cl x ) 3 emission and acceptor RhB absorption. For CsPbBr 3 -RhB, the rate constant for energy transfer (k ET ) agrees well with Förster theory, whereas alloying with chloride to produce chloride-rich CsPb(Br 1–x Cl x ) 3 favors a Dexter mechanism. These results highlight the importance of optimizing both the donor and acceptor properties to design light-harvesting assemblies that employ energy transfer. Furthermore, the ease of tuning optical properties through halide exchange of the nanocrystal donor provides a unique platform for studying and tailoring excited-state interactions in perovskite–chromophore assemblies.

14 SOLAR ENERGY↗
NASA NTRS2004

Setup for Visual Observation of Carbon-Nanotube Arc Process

A simple optical setup has been devised to enable safe viewing of the arc and measurement of the interelectrode gap in a process in which carbon nanotubes are produced in an arc between a catalyst-filled carbon anode and a graphite cathode. This setup can be used for visually guided manual positioning of the anode to maintain the interelectrode gap at a desired constant value, possibly as a low-technology alternative to the automatic position/voltage control described in Automatic Control of Arc Process for Making Carbon Nanotubes (MSC-23134), NASA Tech Briefs, Vol. 28, No. 3 (March 2004), page 51. The optical setup consists mainly of lenses for projecting an image of the arc onto a wall, plus a calibrated grid that is mounted on the wall so that one can measure the superimposed image of the arc. To facilitate determination of the end point of the process, the anode is notched, by use of a file, at the end of the filled portion that is meant to be consumed in the process. As the anode is consumed and the notch comes into view in the scene projected onto the wall, the process operator switches off the arc current.

Scott, Carl D.↗
DOE OSTI2021

On optical properties and scintillation performance of emerging Ga 2 O 3 : Crystal growth, emission mechanisms and doping strategies

As an emerging ultra-wide bandgap compound semiconductor, Ga 2 O 3 has attracted rapidly growing interest due to its unique physical properties for harsh condition applications. Compared to Ga 2 O 3 ’s electrical-characteristic based uses, such as power electronics, photodetectors and solar cells, a much less explored area for Ga 2 O 3 is its promising optical properties and its related scintillation capabilities. Undoped Ga 2 O 3 is a strong scintillator with excellent scintillation characteristics such as fast decay constants and encouraging light yield which is comparable to that of the classic Bi 4 Ge 3 O 12 (BGO) scintillator. The scintillation capability of Ga 2 O 3 can be precisely tuned via a series of approaches including systematic crystal growth control, post-growth annealing, targeted doping, and optimization of operation temperature. Here we summarize exciting progress of Ga 2 O 3 scintillators which have been pursued over the past few years. Our efforts cover a series of growth techniques of Ga 2 O 3 materials as well as discussion of emission mechanisms. Here we dedicate a targeted portion toward the doping strategies to improve the performance of Ga 2 O 3 . A detailed analysis is provided to compare the impact of different dopants. Through these efforts, we hope to provide useful perspectives to help accelerate the development of high performance Ga 2 O 3 scintillators.

36 MATERIALS SCIENCE↗
DOE OSTI2020

N-Terminal Decarboxylation as a Probe for Intramolecular Contact Formation in $γ$-Glu-(Pro) n -Met Peptides

The kinetics of intramolecular-contact formation between remote functional groups in peptides with restricted conformational flexibility were examined using designed peptides with variable-length proline bridges. As probes for this motion, free radicals were produced using the • OH-induced oxidation at the C-terminal methionine residue of γ-Glu-(Pro) n -Met peptides ( n = 0–3). The progress of the radicals’ motion along the proline bridges was monitored as the radicals underwent reactions along the peptides’ backbones. Of particular interest was the reaction between the sulfur atom located in the side chain of the oxidized Met residue and the unprotonated amino group of the glutamic acid moiety. Interactions between them were probed by the radiation-chemical yields (expressed as G values) of the formation of C-centered, α-aminoalkyl radicals (αN) on the Glu residue. These radicals were monitored directly or via their reaction with p -nitroacetophenone (PNAP) to generate the optically detected PNAP •– radical anions. The yields of these αN radicals were found to be linearly dependent on the number of Pro residues. A constant decrease by 0.09 μM J –1 per spacing Pro residue of the radiation-chemical yields of G (αN) was observed. Previous reports support the conclusion that the αN radicals in these cases would have to result from (S$\therefore$N) + -bonded cyclic radical cations that arose as a result from direct contact between the ends of the peptides. Furthermore, by analogy with the rate constants for the formation of intramolecularly (S$\therefore$S) + -bonded radical cations in Met-(Pro) n -Met peptides ( J. Phys. Chem. B 2016 , 120 , 9732), the rate constants for the formation of intramolecularly (S$\therefore$N) + -bonded radical cations are activated to the same extent for all of the γ-Glu-(Pro) n -Met peptides. Thus, the continuous decrease of G (αN) with the number of Pro residues (from 0 to 3) suggests that the formation of a contact between the S-atom in the C-terminal Met residue and the N-atom of a deprotonated N-terminal amino group of Glu is controlled in peptides with 0 to 3 Pro residues by the relative diffusion of the S •+ and unoxidized N-atom. The overall rate constants of cyclization to form the (S$\therefore$N)-bonded radical cations were estimated to be 3.8 × 10 6 , 1.8 × 10 6 , and 8.1 × 10 5 s –1 for peptides with n = 0, 1, and 2 Pro residues, respectively. If activation is the same for all of the peptides, then these rate constants are a direct indication for the end-to-end dynamics along the chain.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗