Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Materials characterization techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Backscatter x-ray development for space vehicle thermal protection systems

The Backscatter X-Ray (BSX) imaging technique is used for various single sided inspection purposes. Previously developed BSX techniques for spray-on-foam insulation (SOFI) have been used for detecting defects in Space Shuttle External Tank foam insulation. The developed BSX hardware and techniques are currently being enhanced to advance Non-Destructive Evaluation (NDE) methods for future space vehicle applications. Various Thermal Protection System (TPS) materials were inspected using the enhanced BSX imaging techniques, investigating the capability of the method to detect voids and other discontinuities at various locations within each material. Calibration standards were developed for the TPS materials in order to characterize and develop enhanced BSX inspection capabilities. The ability of the BSX technique to detect both manufactured and natural defects was also studied and compared to through-transmission x-ray techniques. The energy of the x-ray, source to object distance, angle of x-ray, focal spot size and x-ray detector configurations were parameters playing a significant role in the sensitivity of the BSX technique to image various materials and defects. The image processing of the results also showed significant increase in the sensitivity of the technique. The experimental results showed BSX to be a viable inspection technique for space vehicle TPS systems.

07 ISOTOPE AND RADIATION SOURCES↗

Physical characterization of uranium oxide pellets and powder applied in the Nuclear Forensics International Technical Working Group Collaborative Materials Exercise 4

Physical characterization is one of the most broad and important categories of techniques to apply in a nuclear forensic examination. Physical characterization techniques vary from simple weighing and dimensional measurements to complex sample preparation and scanning electron microscopy-electron backscatter diffraction analysis. This paper reports on the physical characterization conducted by several international laboratories participating in the fourth Collaborative Materials Exercise, organized by the Nuclear Forensics International Technical Working Group. Methods include a range of physical measurements, microscopy-based observations, and profilometry. In conclusion, the value of these results for addressing key investigative questions concerning two uranium dioxide pellets and a uranium dioxide powder is discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Bridging length scales in hard materials with ultra-small angle X-ray scattering – a critical review

Owing to their exceptional properties, hard materials such as advanced ceramics, metals and composites have enormous economic and societal value, with applications across numerous industries. Understanding their microstructural characteristics is crucial for enhancing their performance, materials development and unleashing their potential for future innovative applications. However, their microstructures are unambiguously hierarchical and typically span several length scales, from sub-ångstrom to micrometres, posing demanding challenges for their characterization, especially for in situ characterization which is critical to understanding the kinetic processes controlling microstructure formation. This review provides a comprehensive description of the rapidly developing technique of ultra-small angle X-ray scattering (USAXS), a nondestructive method for probing the nano-to-micrometre scale features of hard materials. USAXS and its complementary techniques, when developed for and applied to hard materials, offer valuable insights into their porosity, grain size, phase composition and inhomogeneities. We discuss the fundamental principles, instrumentation, advantages, challenges and global status of USAXS for hard materials. Using selected examples, we demonstrate the potential of this technique for unveiling the microstructural characteristics of hard materials and its relevance to advanced materials development and manufacturing process optimization. We also provide our perspective on the opportunities and challenges for the continued development of USAXS, including multimodal characterization, coherent scattering, time-resolved studies, machine learning and autonomous experiments. Our goal is to stimulate further implementation and exploration of USAXS techniques and inspire their broader adoption across various domains of hard materials science, thereby driving the field toward discoveries and further developments.

36 MATERIALS SCIENCE↗

Microwave resonance thermomagnetic analysis - A new method for characterizing fine-grained ferromagnetic constituents in lunar materials

Microwave resonance thermomagnetic analysis (MRTA) is the name given to a newly evolved technique for inferring the natures of fine-grained ferromagnetic constituents in lunar materials. Based on standard ferromagnetic resonance (FMR) procedures, the method makes use of the microwave skin effect for diagnosing the presence of metallic iron. Modelling experiments carried out on well-characterized iron and magnetitelike precipitates produced independently in simulated lunar glasses, coupled with published data for magnetite, provide a potential basis for detecting and discriminating between iron metal and ferric iron spinel, even when both are present in an unknown sample. Application of the technique to the lunar samples indicates the possible existence of magnetitelike phases in amounts up to about 0.3 wt% in soils from seven samples regions of the moon. These findings do not require any special geologic processes for their explanation, although some evidence supports the suggestion that fumarolic activity may have occurred in the lunar highlands.

Griscom, D. L.↗

Role of surface hydroxyl groups in promoting room temperature CO sensing by Pd-modified nanocrystalline SnO{sub 2}

SnO{sub 2}/Pd nanocomposites were synthesized via sol-gel method followed by variable processing procedures. The materials are sensitive to CO gas in the concentration range 2-100 ppm at room operating temperature. It was shown that modification of nanocrystalline tin dioxide by Pd changes the temperature dependence of sensor response, decreasing the temperature of maximal signal. To understand the mechanism of room temperature CO sensitivity, a number of SnO{sub 2}/Pd materials were characterized by XRD, TEM, BET, XPS and TPR techniques. From the results of FTIR, impedance and sensing measurements under variable ambient conditions it was concluded that improvement in CO sensitivity for Pd-modified SnO{sub 2} is due to alteration of CO oxidation pathway. The reaction of CO with surface OH-groups at room temperature was proposed, the latter being more reactive than oxygen species due to the possible chain character of the reactions. It was proposed that Pd additive may initiate chain processes at room temperature. - Graphical abstract: Nanocrystalline SnO{sub 2} modified by PdO/Pd clusters exhibit high CO sensitivity at room temperature. An extensive study revealed surface OH-groups participation in CO oxidation on SnO{sub 2} leading to enhanced sensitivity at low operating temperature (25-150 {sup o}C). PdO/Pd clusters supposedly initiate a chain of CO reactions with surface hydroxyls.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Evaluation of Computed Tomography Techniques for Material Identification in Low Level and Intermediate Level Waste - 16648

Measures required to assure long term safe storage of Low-level and intermediate-level short-lived (LIL/SL) waste generated by the nuclear-power industry in France include the characterization of the waste and identification of materials within the waste. Digital Radiography (DR) techniques using x-ray at energies in the 6 MeV range have been shown to be effective for validation of the integrity of the concrete containers, and it was considered that the use of this technique together with the addition of Computed Tomography (CT) techniques could effectively identify materials within the waste. This paper describes the initial evaluation of two DR imaging techniques and two CT techniques using x-ray energy spectra up to 9 MeV to inspect a surrogate waste package, which comprised an outer concrete cylindrical container of 1400 mm diameter with 148 mm wall thickness, and an overall volume of 2 meters cubed, within which a 200 liter drum containing representative heterogeneous inactive waste, was placed in the center and the annulus between the 200 liter drum and the outer cylindrical package was filled with cement grout. The surrogate waste within the 200 liter drum comprised three separate layers of high density, medium density and low density mixed materials. The equipment used was a linear accelerator producing high energy spectra at either 6 MeV or 9 MeV and a high-precision CT manipulator with X, Y, Z and rotation motions, which were common to all techniques investigated. Two different digital detectors were used in the DR and CT performance evaluations, a Digital Detector Array (DDA) comprising a columnar Thallium-doped Cesium-Iodide scintillator screen in intimate contact with a 2 k by 2 k array of amorphous silicon detectors, 200 μm x 200 μm in area, and a Linear Diode Array (LDA) comprising a line of Cadmium-Tungstate columns, 1 cm thick and 400 μm x 400 μm in area. The work comprised evaluations of linear accelerator spectra and the attenuation effects of the waste container and contents, image acquisition performance of each detector, and CT techniques using area detector and linear detector. The results presented in this paper include mathematical evaluation of the two CT techniques, and analysis of measurement data, digital images, CT reconstruction images, and estimated material densities. The data was compared with recorded details and photographs of the actual configuration of materials within the surrogate waste. The Digital Detector Array can generate CT inspection volumes with considerable resolution and detail for the low-density and medium-density sections of the surrogate waste, however, the high-density sections were not imaged with sufficient detail and the images contained a large number of artifacts mainly due to the detectors lack of high energy photon stopping power. Materials identification with the Digital Detector Array, while possible for certain materials, for materials in the steel to plastic density range the attenuation values of the voxels in the reconstruction are too similar and difficult to resolve from the artifacts present. The Linear Diode Array can generate CT inspection volumes of regions of interest of the low-density and medium-density sections with considerable resolution and contrast, and potentially acceptable levels of resolution and contrast of the high-density section of the waste. While a few artifacts were present in the reconstructions, the majority are not due to the fundamental properties of the detector and are considered to be correctable. Materials identification with the LDA inspection data appear to be viable, with steel, copper, and higher-density metals being readily be distinguished from other materials on the basis of voxel value. Future work is needed to obtain a better definition of optimum spatial resolution and inspection speed, and to develop a system of 'calibration rods' which would consist of a series of 50 mm diameter cylinders of 7 materials; Plastic, Teflon, Concrete, Aluminum, Copper, Tungsten and Lead. The cylinders will be distributed at a certain radius in the surrogate waste and will be used as reference points in the evaluation and demonstration of the contrastive performance for the low, medium and high-density cases. The ability to identify the materials within a sealed waste container, by nondestructive examination, enables the verification of waste acceptance criteria without the need to open the waste containers. This eliminates the need for complex and expensive equipment to open and remotely handle the intermediate level waste, avoids potential hazards and risk of personnel dose uptake, and does not increase the volume of waste caused by repackaging of materials after examination and the decontamination or disposal of equipment used.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Visualization of membrane protein crystals in lipid cubic phase using X-ray imaging

A comparison of X-ray diffraction and radiographic techniques for the location and characterization of protein crystals is demonstrated on membrane protein crystals mounted within lipid cubic phase material. The focus in macromolecular crystallography is moving towards even more challenging target proteins that often crystallize on much smaller scales and are frequently mounted in opaque or highly refractive materials. It is therefore essential that X-ray beamline technology develops in parallel to accommodate such difficult samples. In this paper, the use of X-ray microradiography and microtomography is reported as a tool for crystal visualization, location and characterization on the macromolecular crystallography beamlines at the Diamond Light Source. The technique is particularly useful for microcrystals and for crystals mounted in opaque materials such as lipid cubic phase. X-ray diffraction raster scanning can be used in combination with radiography to allow informed decision-making at the beamline prior to diffraction data collection. It is demonstrated that the X-ray dose required for a full tomography measurement is similar to that for a diffraction grid-scan, but for sample location and shape estimation alone just a few radiographic projections may be required.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of 14YWT & ODS Base Metals

Nanostructured ferritic alloys (NFA) with oxide dispersion strengthening are being developed for next generation reactor applications. Applications such as transmutation of long lived isotopes in used fuels require cladding materials that can withstand high irradiation doses, potentially in the hundreds of displacements per atom (dpa). Currently, however, there are no joining processes that retain the strength and fine distribution of oxide precipitates characteristic of ODS alloys. As part of a larger effort to adapt a solid state capacitive discharge welding technique for use with ODS cladding, presented will be characterization of the initial materials including 14YWT and MA956 ODS alloys.

36 MATERIALS SCIENCE↗

Fabrication of MCM-41 fibers with well-ordered hexagonal mesostructure controlled in acidic and alkaline media

In this paper, synthesis and characterization of two type morphologies of the MCM-41mesoporous material, nano and microfibers, were investigated by electrospinning technique. The synthesis was performed in acidic and alkaline media, separately. The MCM-41 morphologies were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), x-ray powder diffraction (XRD), and nitrogen adsorption–desorption measurement. Tetraethylorthosilicate (TEOS) and cetyltrimethylammonium bromide (CTAB) were used as silica and template sources for the synthesis of MCM-41 morphologies, respectively. The SEM results showed that MCM-41 nanofibers were spun in acidic media and microfibers of MCM-41 were produced in alkaline media. The XRD study revealed a long range structural ordering of mesoporous materials. The TEM results indicated rough surfaces with uniform average diameter 200 nm for nanofibers and 2 µm for microfibers. The pore diameter and surface area of calcined MCM-41 nanofibers were 2.2 nm and 970 m{sup 2}/g, respectively. For the MCM-41 microfibers, pore sizes of 2.7 nm and surface areas 420 m{sup 2}/g was measured. - Graphical abstract: Electrospinning method was used for fabricating of MCM-41 microfibers from TEOS in alkaline media (top) and MCM-41 nanofibers in acidic media (bottom). - Highlights: • Synthesis of MCM-41 nanofibers and microfibers by electrospinning technique. • MCM-41 nanofibers were synthesized in acidic media. • MCM-41 manofibers spun in alkaline media. • Electrospinning was a simple method for preparing of fibers with respect to chemical method.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Elemental characterization of LL-MA radioactive waste packages with the associated particle technique

The French Alternative Energies and Atomic Energy Commission (CEA) and National Radioactive Waste Management Agency (ANDRA) are conducting an R and D program to improve the characterization of long-lived and medium activity (LL-MA) radioactive waste packages with analytical methods and with non-destructive nuclear measurements. This paper concerns fast neutron interrogation with the associated particle technique (APT), which brings 3D information about the waste material composition. The characterization of volume elements filled with iron, water, aluminium, and PVC in bituminized and fibre concrete LL-MA waste packages has been investigated with MCNP [1] and MODAR data analysis software [2]. APT provides usable information about major elements presents in the volumes of interest. However, neutron scattering on hydrogen nuclei spreads the tagged neutron beam out of the targeted volume towards surrounding materials, reducing spatial selectivity. Simulation shows that small less than 1 L targets can be characterised up to the half-radius of a 225 L bituminized drum, the matrix of which is very rich in hydrogen. Deeper characterization in concrete is possible but limited by counting statistics due to photon attenuation in this dense matrix and, unless large inspection volumes are considered, by the lack of spatial selectivity of the tagged neutron beam due to neutron scattering. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Lunar mineral feedstocks from rocks and soils: X-ray digital imaging in resource evaluation

The rocks and soils of the Moon provide raw materials essential to the successful establishment of a lunar base. Efficient exploitation of these resources requires accurate characterization of mineral abundances, sizes/shapes, and association of 'ore' and 'gangue' phases, as well as the technology to generate high-yield/high-grade feedstocks. Only recently have x-ray mapping and digital imaging techniques been applied to lunar resource evaluation. The topics covered include inherent differences between lunar basalts and soils and quantitative comparison of rock-derived and soil-derived ilmenite concentrates. It is concluded that x-ray digital-imaging characterization of lunar raw materials provides a quantitative comparison that is unattainable by traditional petrographic techniques. These data are necessary for accurately determining mineral distributions of soil and crushed rock material. Application of these techniques will provide an important link to choosing the best raw material for mineral beneficiation.

Chambers, John G.↗

International Workshop on Best Practices in Material Hold-Up Monitoring

In the fall of 2006, the Oak Ridge National Laboratory (ORNL) hosted an INMM-sponsored International Workshop on Best Practices in Material Hold-Up Monitoring. This workshop represented the first time in over 20 years that the international community had gathered to discuss pertinent hold-up topics and needs. More than one hundred people attended the workshop. Their expertise in the field ranged from novice to expert, and they shared their experiences and expertise throughout the week of the workshop. Presenters discussed techniques that have been used worldwide to detect and characterize nuclear materials held up in processes and equipment and the policies used to report quantities detected. The primary goal of the workshop was to compile information on the best practices and lessons learned and to make this information available for sharing throughout the international community. This paper discusses the information that was produced from four separate working groups (each composed of workshop attendees). Each group was tasked to determine what it felt to be the best practices in the field today and what issues needed to be addressed to move the field forward in the 21st century.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Three-dimensional microstructural characterization of bulk plutonium and uranium metals using focused ion beam technique

Nuclear forensics requires accurate quantification of discriminating microstructural characteristics of the bulk nuclear material to identify its process history and provenance. Conventional metallographic preparation techniques for bulk plutonium (Pu) and uranium (U) metals are limited to providing information in two-dimension (2D) and do not allow for obtaining depth profile of the material. In this contribution, use of dual-beam focused ion-beam/scanning electron microscopy (FIB-SEM) to investigate the internal microstructure of bulk Pu and U metals is demonstrated. Our results demonstrate that the dual-beam methodology optimally elucidate microstructural features without preparation artifacts, and the three-dimensional (3D) characterization of inner microstructures can reveal salient microstructural features that cannot be observed from conventional metallographic techniques. As a result, examples are shown to demonstrate the benefit of FIB-SEM in improving microstructural characterization of microscopic inclusions, particularly with respect to nuclear forensics.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Disordered TiO x –SiO x Nanocatalysts Using Bioinspired Synthetic Routes

Metal oxide nanomaterials have increasing significance and broad applications in catalysis, ranging from support materials to active catalysts. Here, we have demonstrated a facile synthetic strategy to create disordered, high-surface-area metal oxide nanomaterials using biomineralization-inspired methods. Using protamine as a protein template, a range of TiO x –SiO x nanomaterials were synthesized and implemented for catalytic CO 2 thermal reduction reactions. The modularity of synthetic options afforded via biomineralization enables increases in surface area, which are ideally suited for subsequent modification to regulate catalytic performance. All materials were thoroughly characterized using a suite of synchrotron scattering and spectroscopic methods. Through these techniques, we have demonstrated that protamine-induced biomineralization results in largely disordered materials with changes in the local atomic structure dependent on the applied synthetic conditions. Protamine removal with treatment under acidic conditions greatly increased material surface area while causing measurable changes in the structure as revealed by X-ray absorption spectroscopy. Upon subsequent hydrogenation, Ti- and Si-based defects were induced in the materials while the disordered nature of the material was still largely retained. Furthermore, we found that the incorporation of Si into TiO x was able to mitigate the known anatase to rutile phase change during the reaction while stabilizing the defect sites. The synthetic strategies described in this work are expected to be translatable to other metal oxide nanomaterial chemical structures, providing a means to control catalytic properties using benign synthetic strategies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Purification of Gas and Liquid Streams Using Composite Sorbents Embedded in a Polyacrylonitrile Matrix

As new sorbents are developed for purifying gases or liquids via physisorption and/or chemisorption processes, the objective is typically to increase the specific surface area (SSA) to maximize the available binding sites for capturing various species of interest. One downfall to making a sorbent more porous is that it often leads to a product that is fragile or friable and can be damaged (resulting in unwanted powders), thus imposing process limitations. Techniques can be used to enhance the mechanical integrity of a sorbent, including heat treatments or pelletization with extrusion or granulation processes, but these can result in collapsed, unavailable pore structures within the sorbent, which decreases the diffusivity and eventually reduces the capacities of target species. An alternative approach for improving the mechanical integrity of the sorbent is to bind it (or encapsulate it) within a porous matrix that passively holds the sorbent in place. Typically, this approach leads to a decrease in sorption efficiency on the basis of starting sorbent mass, because the active sorbent is diluted by the binding matrix material and the active surfaces of the sorbent are somewhat obscured by the binding matrix; however, it comes with the advantage that the active sorbent is held in place and better protected from disintegrating during operation. One approach to securing the active sorbent is to embed it in a macroporous, passive polyacrylonitrile (PAN) matrix to create a composite sorbent. When optimized, the PAN matrix is highly porous and allows for gaseous or aqueous media transport through the product, providing adequate binding site access between the active sorbent and the species of interest. Including a polymer in the composite sorbent limits the maximum operating temperature, above which the composite sorbent incurs loss of structural integrity (e.g., decomposes) and/or reduction in SSA. Composite sorbents have been demonstrated with sulfide aerogels (SnS-PAN) for capturing I2(g), hydrogen mordenite (HZ-PAN) and silver-exchanged mordenite (AgZ-PAN) for capturing Kr and Xe, nanoparticle metal oxides (Nano-Composite Arsenic Sorbent, or N-CAS) for removing arsenic from water, ammonium molybdophosphate (AMP-PAN) for removing cesium-137 (137Cs) from aqueous nuclear waste streams, and The Phosphate Sponge (TPS) composite, which is being used to remove inorganic/ortho-phosphates in water treatment processes to mitigate introduction to the environment, which impedes toxic algae bloom formations. This chapter provides details on production of these materials along with options to optimize the synthesis process. It also includes experimental techniques to characterize products and assess their performance.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Comparing non-destructive 3D X-ray computed tomography with destructive optical microscopy for microstructural characterization of fiber reinforced composites

Due to their lightweight, relatively high stiffness properties, and formability into complex shapes, discontinuous fiber composites are advantageous for producing small and medium size components. Improved characterization techniques and post-processing methodologies are required for more reliable quantification of the microstructure and defect distributions in these materials, in order to employ model-based approaches to assess their structural integrity. This work compares a non-destructive X-ray approach with a destructive optical microscopy approach for characterizing the microstructural attributes, specifically the fiber volume fraction, porosity volume fraction, fiber orientation distribution, and fiber length distribution of discontinuous glass fibers in a polypropylene matrix. Additionally, a method for destructively determining the ambiguous components of the orientation tensor (related to the sign ambiguity of the out-of-plane angle in a destructive cross-sectional cut of a fiber) over a large surface area is included. It was found that fiber volume fraction and average fiber aspect ratio matched well, while fiber orientation and porosity detection had small but notable differences. The differences in the detection capabilities of each technique are quantified and discussed shedding light on the specific advantages and disadvantages of each approach, and enabling engineers to quantify uncertainty in their microstructural characterization measurements especially as they relate to model based structural integrity activities.

Non-destructive testing↗

Meso-scale imaging of composite materials

The performance of composite materials is controlled by the interaction between the individual components as well as the mechanical characteristics of the components themselves. Geometric structure on the meso-scale, where the length-scales are of the same order as the material granularity, plays a key role in controlling material performance and having a quantitative means of characterizing this structure is crucial in developing our understanding of NDE technique signatures of early damage states. High-resolution computed tomography (HRCT) provides an imaging capability which can resolve these structures for many composite materials. Coupling HRCT with three-dimensional physics-based image processing enables quantitative characterization of the meso-scale structure. Taking sequences of these damage states provides a means to structurally observe the damages evolution. We will discuss the limits of present 3DCT capability and challenges for improving this means to rapidly generate structural information of a composite and of the damage. In this presentation we will demonstrate the imaging capability of HRCT.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Integrating Machine Learning Potential and X-ray Absorption Spectroscopy for Predicting the Chemical Speciation of Disordered Carbon Nitrides

Precise determination of atomic structural information in functional materials holds transformative potential and broad implications for emerging technologies. Spectroscopic techniques, such as X-ray absorption near-edge structure (XANES), have been widely used for material characterization; however, extracting chemical information from experimental probes remains a significant challenge, particularly for disordered materials. We present an integrated approach that combines atomic simulations, data-driven techniques, and experimental measurements to investigate chemical speciation of amorphous carbon nitride systems as a case study. Here, we discuss the development of machine learning potentials that can efficiently explore the vast configuration space of amorphous carbon nitrides. By employing statistical methods, this structural database enables the elucidation of the most representative local structures and how they evolve with chemical compositions and density. Density functional theory simulations are used to establish a correlation between the local structure and spectroscopic signatures, which then serve as the basis for interpreting and extracting chemical content from experimental data. Although our framework is specifically demonstrated for XANES and carbon nitrides, the approach described herein is readily adaptable as applied to other experimental characterization probes and materials classes.

36 MATERIALS SCIENCE↗