Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Study of plasma dynamics in a modulated pulsed power magnetron discharge using a time-resolved Langmuir probe

Modulated pulse power (MPP) technology is a derivative of high power pulsed magnetron sputtering that allows unprecedented user control over the growth process, although the critical time-dependent plasma properties during the power pulse have not been studied until now. Using a MPP plasma generator, pulses of custom voltage waveforms were generated and applied to the cathode of a 36 cm diameter circular planar magnetron. The I-V characteristics of the pulses are separable into distinct discharge stages. A time-resolved triple Langmuir probe was introduced to measure the temporal evolution of the plasma. Typical electron density of 5x10{sup 17} m{sup -3} and electron temperature of 10 eV during the pulse were calculated from measured parameters. Plasma behaviors were observed to closely depend on the pulse waveforms. Various parameters, including pulse current, pulse frequency, pressure, and distance from the target, also affected the electron density and temperature, providing degrees of freedom to optimize the sputtering processes. The effects of each parameter on the pulsed plasma dynamics are discussed and then attributed to mechanisms of electron impact ionization, gas heating, and magnetic confinement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phase investigation in Pt supported off-stoichiometric iron-platinum thin films

Graphical abstract: - Highlights: • Low temperature FePt L1{sub 0} phase transformation using Pt/Fe{sub 3}Pt/Pt structure. • Temperature dependent FCC to FCT phase investigation using Rietveld refinement. • Estimation of soft and hard ferromagnetic contribution from demagnetization curve. • Interlayer diffusion and stoichiometry conformation of L1{sub 0} phase using RBS. • Correlation of structural, magnetic and RBS studies were successfully understood. - Abstract: The structural and magnetic phase transformation of Pt/Fe{sub 3}Pt/Pt films on Si <1 0 0> substrates prepared by DC magnetron sputtering is investigated as a function of annealing temperature. Pt diffusion driven low temperature phase transformation from A1 to L1{sub 0} phase is achieved at 300 °C, attaining a very high coercivity of 9 kOe. At 300 °C, 85% L1{sub 0} phase transformation is observed using the X-ray diffraction profile fitting. The estimated phase content is also further verified by fitting the demagnetization curve. The underlayer promotes the ordering at lower temperature while overlayer induces growth along (0 0 1) preferred orientation. Rutherford back scattering study reveals interlayer diffusion and confirms the desired stoichiometry for L1{sub 0} phase. The presence of Pt under-overlayer provides the Pt source and further facilitates the Pt diffusion, which makes it effective in promoting the phase ordering at a lower temperature.

36 MATERIALS SCIENCE↗

Embedded argon as a tool for sampling local structure in thin plasma deposited aluminum oxide films

Al{sub 2}O{sub 3} thin films, either amorphous or of varying degrees of crystallinity, were deposited by two-frequency radio-frequency magnetron sputtering. Film crystallinity was investigated by Fourier transform infrared spectroscopy and X-ray diffraction (XRD). X-ray photoelectron spectroscopy (XPS) was employed to determine the amount of Ar naturally trapped within the films during the deposition process. A clear correlation was found between the existence of crystalline phases, as determined by XRD, and a shift towards lower binding energy positions of the Ar2p core levels of embedded gas. The shift is due to differences in the local Al{sub 2}O{sub 3} matrix (amorphous or crystalline) of the embedded gas, thus, providing an XPS fingerprint that can be used to qualitatively determine the presence or absence of crystalline phases in very thin films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical Properties of p-NiO/n-Si Heterostructures Based on Nanostructured Silicon

Silicon nanowires are formed on n-Si substrates by chemical etching. p-NiO/n-Si heterostructures are fabricated by reactive magnetron sputtering. The energy diagram of anisotype p-NiO/n-Si heterostructures is constructed according to the Anderson model. The current–voltage and capacitance–voltage characteristics are measured and analyzed. The main current-transport mechanisms through the p-NiO/n-Si heterojunction under forward and reverse biases are established.

36 MATERIALS SCIENCE↗

Dual anisotropic character in Fe/Pt multilayer grown on (001) MgO substrate

The multilayers of [Fe(5Å)/Pt(25 Å)]{sub ×15} were prepared by dc magnetron sputtering on 50 Å Pt-buffered MgO substrates. The structural characterization of the multilayers was carried out using X-ray diffraction, X-ray reflectivity. The Secondary ion mass spectroscopy measurement reveals the depth profile and compositional modulations of the multilayer films as per our design specifications. Room temperature magnetic measurements were carried out by using SQUID both in-plane and out-of-plane sample geometry. Magnetization measurements show similar M-H loops for both in-plane and out-of-plane directions of external magnetic field with a coercivity of 190 Oe. These measurements indicate that our samples are magnetically soft and have multifunctional character which is important for making magnetic tunnel junctions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Room temperature ferromagnetic and ferroelectric properties of Bi{sub 1−x}Ca{sub x}MnO{sub 3} thin films

Bi{sub 1−x}Ca{sub x}MnO{sub 3} (BCMO) thin films with x = 0, 0.1, 0.2, 0.3 and 0.4 are successfully deposited on the n-type Si (100) substrate at two different temperatures of 400 °C and 800 °C using RF magnetron sputtering. The stoichiometry of the films and oxidation state of the elements have been described by X-ray photoelectron spectroscopy analysis. Dielectric measurement depicts the insulating property of BCMO films. Magnetic and ferroelectric studies confirm the significant enhancement in spin orientation as well as electric polarization at room temperature due to incorporation of Ca{sup 2+} ions into BiMnO{sub 3} films. The BCMO (x = 0.2) film grown at 400 °C shows better magnetization (M{sub sat}) and polarization (P{sub s})with the measured values of 869 emu / cc and 6.6 μ{sub C}/ cm{sup 2} respectively than the values of the other prepared films. Thus the realization of room temperature ferromagnetic and ferroelectric ordering in Ca{sup 2+} ions substituted BMO films makes potentially interesting for spintronic device applications.

36 MATERIALS SCIENCE↗

Structural, magnetic, and transport properties of Fe-doped CoTiSb epitaxial thin films

Epitaxial intrinsic and Fe-doped CoTiSb thin films with C1{sub b} structure were grown on MgO(100) substrates by magnetron sputtering. The semiconducting-like behavior in both intrinsic and Fe-doped thin films was demonstrated by temperature dependence of longitudinal resistivity. The Fe-doped CoTiSb films with a wide range of doping concentrations can maintain semiconducting-like and magnetic properties simultaneously, while the semiconducting behavior is weakening with the increasing Fe concentration. For 21 at. % Fe-doped film, low lattice magnetic moment (around 0.65 μ{sub B}) and high resistivity (larger than 800 μΩ cm) are beneficial to its application as a magnetic electrode in spintronic devices. Anomalous Hall effect of 21 at. % Fe-doped film was also investigated and its behaviors can be treated well by recent-reported anomalous Hall scaling including the contribution of spin-phonon skew scattering.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multiphase Nano-Composite Coatings for Achieving Energy Optimization

UES Inc. and ANL teamed in this work to develop novel coating systems for the protection of surfaces from thermal degradation mainly in two applications; Machining and Die casting. These coatings were specifically designed for the purpose by incorporating required material phases and the overall architecture, which led to reduce the energy usage and increase efficiency of the operations. Following the UES/ANL's feasibility work, the coatings were developed utilizing High power impulse magnetron sputtering (HiPMS) and Large area filtered arc deposition (LAFAD) techniques. Toughness, hardness and oxidation resistance: contrasting qualities have been mixed in the right proportion to attain the suitable material characteristic for the cause. Hafnium diboride (HfB 2 ) based materials provided such a system and its properties were tamed to attain the right combination of toughness and hardness by working on the microstructure and architecture of coatings. An effective interfacing material (graded concentrations of topcoat) was also achieved in this work to provide the required adhesion between the substrate and the coating. Combination of an appropriate bond coat and a functional top coat provided the present thermal degradation resistant coating for cutting tools and die-casting applications. Laboratory level performance tests and industrial level application tests by partner companies (Beta Site Testing) were used for the development of these coatings.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Extraordinarily large perpendicular magnetic anisotropy in epitaxially strained cobalt-ferrite Co{sub x}Fe{sub 3−x}O{sub 4}(001) (x = 0.75, 1.0) thin films

Perpendicular magnetic anisotropy (PMA) of cobalt-ferrite Co{sub x}Fe{sub 3-x}O{sub 4} (x = 0.75 and 1.0) epitaxial thin films grown on MgO (001) by a reactive magnetron sputtering technique was investigated. The saturation magnetization was found to be 430 emu/cm{sup 3} for x = 0.75, which is comparable to that of bulk CoFe{sub 2}O{sub 4} (425 emu/cm{sup 3}). Torque measurements afforded PMA constants of K{sub u}{sup eff}=9.0 Merg/cm{sup 3} (K{sub u}=10.0 Merg/cm{sup 3}) and K{sub u}{sup eff}=9.7 Merg/cm{sup 3} for x = 0.75 and 1.0, respectively. The value of K{sub u}{sup eff} extrapolated using Miyajima's plot was as high as 14.7 Merg/cm{sup 3} for x = 1.0. The in-plane four-fold magnetic anisotropy was evaluated to be 1.6 Merg/cm{sup 3} for x = 0.75. X-ray diffraction measurement revealed our films to be pseudomorphically strained on MgO (001) with a Poisson ratio of 0.4, leading to a considerable in-plane tensile strain by which the extraordinarily large PMA could be accounted for.

36 MATERIALS SCIENCE↗

Current-perpendicular-to-the-plane magnetoresistance from large interfacial spin-dependent scattering between Co{sub 50}Fe{sub 50} magnetic layer and In-Zn-O conductive oxide spacer layer

We have investigated electrically conductive indium-zinc-oxide (IZO) deposited by magnetron sputtering as spacer layer for current-perpendicular-to-the-plane giant magnetoresistance sensor devices. Spin-valves with a Co{sub 50}Fe{sub 50}/IZO/Co{sub 50}Fe{sub 50} trilayer showed resistance-area product (RA) ranging from 110 to 250 mΩ μm{sup 2}, significantly larger than all-metal structures with Ag or Cu spacers (∼40 mΩ μm{sup 2}). Magnetoresistance ratios (ΔR/R) of 2.5% to 5.5% depending on the IZO spacer thickness (1.5–6.0 nm), corresponding to ΔRA values from 3 to 13 mΩ μm{sup 2}, were obtained. The values of ΔRA with the IZO spacers and Co{sub 50}Fe{sub 50} magnetic layers were significantly larger than those with conventional metal spacers and Co{sub 50}Fe{sub 50} magnetic layers (∼1–2 mΩ μm{sup 2}). The dependence of ΔRA on the magnetic layer thickness suggests that the larger ΔRA obtained with IZO spacer is due to a large interfacial spin-dependent scattering caused by the large specific resistance at the Co{sub 50}Fe{sub 50}/IZO interface. From structural characterization by TEM and the observed dependence of the RA dispersion on device size, the electric current flowing through the IZO spacer is thought to be laterally uniform, similar to normal metal spacers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Study of Electrical Transport and Magnetic Properties of Nd{sub 0.7}Sr{sub 0.3}MnO{sub 3}/Nd{sub 0.8}Na{sub 0.2}MnO{sub 3} Bilayer Thin Films

Bilayer films of Nd{sub 0.7}Sr{sub 0.3}MnO{sub 3}/Nd{sub 0.8}Na{sub 0.2} MnO{sub 3} were grown on 001-orientated LaAlO{sub 3} substrate by using RF magnetron sputtering. The thickness of the Nd{sub 0.8}Na{sub 0.2}MnO{sub 3} (NNMO) film was kept fixed at 120 nm while that of the Nd{sub 0.7}Sr{sub 0.3}MnO{sub 3} (NSMO) film was varied from 12 to 100 nm. X-ray diffraction patterns confirm the growth of films along the (001) direction, and the out-of-plane lattice constant of the NSMO film decreases with an increase in film thickness. The bilayer films are found to undergo out-of-plane tensile strain, and the lattice strain is found to decrease with an increase in film thickness. The ferromagnetic transition temperature is found to increase with an increase in the NSMO film thickness. M–H loops recorded at 50 K show a systematic increase in saturation magnetisation with an increase in film thickness. Metal–insulator transition has been observed for the film thickness of 30 nm and above, and the transition temperature is found to increase with an increase in film thickness. The electrical resistivity data in the metallic region were explained based on electron–electron and electron–magnon scattering mechanism by including a weak localisation effect at low temperature. The electrical resistivity data in the insulating region follow the Mott-variable range hopping model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

TEM Study of Zircaloy 2 with FeCrAl Layer under Simulated BWR Environment

Zircaloy 2 is widely used as nuclear fuel cladding in light-water nuclear reactors, which is resistive to corrosion, creep, and swelling. Due to water chemical reactivity and high-temperature steam exposure, oxidation in zirconium cladding is possible during transients. To mitigate the zirconium oxidation and the hydrogen generation at elevated temperature, we have coated Zircaloy 2 with oxide resistant FeCrAl thin film layers using magnetron sputtering. Transmission electron microscopy (TEM), scanning transmission electron microscopy (STEM), and electron energy-dispersive X-ray spectroscopy (EDX) are used to understand the behavior of the protective FeCrAl layer under typical BWR operation conditions. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Determination of heterojunction band offsets between CdS bulk and PbS quantum dots using photoelectron spectroscopy

Photoelectron spectroscopy was used to measure the energy discontinuity in the valence band (ΔE{sub V}) of a CdS/PbS quantum dot (QD) heterojunction for which the PbS QD layer was deposited using solution based layer-by-layer dip coating method on top of RF magnetron sputtered CdS. A value of ΔE{sub V} = 1.73 eV was obtained using the Cd 3d and Pb 4f energy levels as references. Given the band gap energies of the CdS and PbS-QD layers, the conduction band offset ΔE{sub C} was determined to be 0.71 eV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Irreversible thermochromic response of RF sputtered nanocrystalline BaWO{sub 4} films for smart window applications

We report irreversible thermochromic behaviour of BaWO{sub 4} (BWO) films for the first time. BWO films have been deposited at different substrate temperatures (RT, 200, 400, 600 and 800 °C) using RF magnetron sputtering in pure argon plasma. BWO films deposited at 800 °C exhibit crystalline nature. Also, BWO films deposited in the temperature range of 400 - 600 °C exhibit WO{sub 3} as a secondary phase and its weight percentage decreases with an increase in deposition temperature, whereas the films deposited at 800 °C exhibited pure tetragonal phase. FESEM images revealed that as the average particle sizes of the films are higher as compared with the thickness of the films and is explained based on Avrami type nucleation and growth. The transmittance of the films decreases with an increase in deposition temperature up to 600 °C and increases thereafter. Films deposited at 600 °C show ≤ 20% transmittance, looking at the films deposited at room temperature and 800 °C exhibits 90 and 70%, respectively. The refractive index and extinction coefficient of the films show profound dependence on crystallinity and packing density. The optical bandgap of BWO films increases significantly with an increase in O{sub 2}% during the deposition. The optical bandgap of the BWO films deposited at different temperatures in pure argon plasma, are in the range of 3.7 to 3.94 eV whereas the films deposited at 600 °C under different O{sub 2} plasma are in the range of 3.6 - 4.5 eV. The formations of colour centres are associated with the oxygen vacancies, which are clearly seen from the optical bandgap studies. The observed irreversible thermochromic behaviour in BWO films is attributed to the presence of oxygen vacancies that arises due to the electrons trapped at oxygen vacancies causing an inter valence charge transfer of W{sup 5+} to W{sup 6+} and is confirmed through the change in the optical density (ΔOD). Further, the Raman spectra are being used to quantify the presence of oxygen vacancies and the formation of pure BWO phase. The obtained optical responses of BWO films are promising for solar cell and smart window applications.

36 MATERIALS SCIENCE↗

Mechanisms of charge transport in anisotype n-TiO{sub 2}/p-CdTe heterojunctions

Surface-barrier anisotype n-TiO{sub 2}/p-CdTe heterojunctions are fabricated by depositing thin titanium-dioxide films on a freshly cleaved surface of single-crystalline cadmium-telluride wafers by reactive magnetron sputtering. It is established that the electric current through the heterojunctions under investigation is formed by generation-recombination processes in the space-charge region via a deep energy level and tunneling through the potential barrier. The depth and nature of the impurity centers involved in the charge transport are determined.

36 MATERIALS SCIENCE↗

Argon–oxygen dc magnetron discharge plasma probed with ion acoustic waves

The precise determination of the relative concentration of negative ions is very important for the optimization of magnetron sputtering processes, especially for those undertaken in a multicomponent background produced by adding electronegative gases, such as oxygen, to the discharge. The temporal behavior of an ion acoustic wave excited from a stainless steel grid inside the plasma chamber is used to determine the relative negative ion concentration in the magnetron discharge plasma. The phase velocity of the ion acoustic wave in the presence of negative ions is found to be faster than in a pure argon plasma, and the phase velocity increases with the oxygen partial pressure. Optical emission spectroscopy further confirms the increase in the oxygen negative ion density, along with a decrease in the argon positive ion density under the same discharge conditions. The relative negative ion concentration values measured by ion acoustic waves are compared with those measured by a single Langmuir probe, and a similarity in the results obtained by both techniques is observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Exchange bias and crystal structure of epitaxial (111) FePt/BiFeO{sub 3} sputtered thin films

Crystallographic structure and magnetic properties of the epitaxial FePt (10 nm)/BiFeO{sub 3} (BFO) (10 nm) bilayer films grown on (111) SrTiO{sub 3} (STO) substrates with different deposition temperatures of FePt layers (T{sub d}) have been investigated using magnetron sputtering. Out-of-plane radial scan along (111) direction and off-normal (002) azimuthal scan, determined by synchrotron radiation x-ray diffractometry, evidence that the FePt layers were well epitaxially grown on the (111) epitaxial BFO layers for the samples with T{sub d} = 300 and 700 °C. On the contrary, for the bilayer films with T{sub d} = 500 °C, the FePt and BFO layers exhibit low epitaxial quality. Large in-plane exchange bias field (H{sub eb}) values of 45–412 Oe are obtained for the L1{sub 0}-FePt/BFO bilayer films measured with applied field of 12 kOe at room temperature. The change of effective interfacial area, observed by scanning electron microscopy, between FePt island-like particles and BFO continuous layers, and epitaxiality of the bilayer were correlated with the evolution of H{sub eb}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of energetic and thermalized sputtered atoms in pulsed plasma using time-resolved tunable diode-laser induced fluorescence

In this work, a time-resolved tunable diode-laser (DL) induced fluorescence (TR-TDLIF) method calibrated by absorption spectroscopy has been developed in order to determine atom and flux velocity distribution functions (AVDF and FVDF) of the energetic and the thermalized atoms in pulsed plasmas. The experimental set-up includes a low-frequency (∼3 Hz) and high spectral-resolution DL (∼0.005 pm), a fast rise-time pulse generator, and a high power impulse magnetron sputtering (HiPIMS) system. The induced TR-TDLIF signal is recorded every 0.5 μs with a digital oscilloscope of a second-long trace. The technique is illustrated with determining the AVDF and the FVDF of a metastable state of the sputtered neutral tungsten atoms in the HiPIMS post-discharge. Gaussian functions describing the population of the four W isotopes were used to fit the measured TR-TDLIF signal. These distribution functions provide insight into transition from the energetic to thermalized regimes from the discharge onset. This technique may be extended with appropriate DLs to probe any species with rapidly changing AVDF and FVDF in pulsed and strongly oscillating plasmas.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗