Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LIGNITE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

New approach to understanding NO emission during bubbling fluidized bed coal combustion: separation of NO formation and reduction processes in the bed

A new approach for separately evaluating NO formation and NO reduction during coal combustion in a fluidized bed was investigated. Sixteen different coals were burned in a laboratory-scale bubbling fluidized bed combustor with three different char loadings, which were established by changing the inlet oxygen concentrations. NO conversion ratios (X{sub NO} = the ratio of the mass of N atoms in the emitted NO to the mass of N atoms in the coal) were determined for the coals, and then 'ultimate NO conversion ratios' (X{sub NO}*) were obtained by extrapolation of the lines describing the dependence of X{sub NO} on O{sub 2} consumption rate to an O{sub 2} consumption rate of zero. The X{sub NO}* values correspond to the values that would be obtained for a single coal particle burning in the absence of char particles. Using this technique, the contribution of char particles to NO reduction was evaluated. The X{sub NO}* values depended on the N content and the O/N molar ratio of the coals. The bed temperature dependences of the sensitivity values (the slopes of the lines describing the dependence of X{sub NO} on O{sub 2} consumption rate), which include the contribution of NO reduction by char particles, differed substantially for the different coals. However, char loading had no clear effect on N{sub 2}O emission. This result suggests that the reduction by the char particles involves the competitive reaction of NO and N{sub 2}O, and the effect of the N{sub 2}O reduction by burning char particles was less than NO reduction. Our results indicate the importance of taking into account the effects of NO reduction by char particles on overall NOx emissions during fluidized bed combustion of coal. 19 refs., 14 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Insights into the coal extractive solvent N-methyl-2-pyrrolidone + carbon disulfide

A wide set of experimental and computational tools were used to characterize the N-methyl-2-pyrrolidone (NMP) + carbon disulfide mixed solvent in the full composition range. The interest in this solvent rose from its very efficient use for coal extraction through a mechanism still not fully understood. Thermophysical properties at ambient pressure together with pressure-volume-temperature (PVT) behavior were measured with the objective of providing the required data for the industrial use of the mixed fluid and to get insight into the fluid structure at the molecular level. NMR, FTIR, and solvatochromic studies were performed together with microwave dielectric relaxation spectroscopy (DRS) measurements, thus providing more information on the fluid's structure and allowing one to relate the molecular level behavior with the measured macroscopic properties. Moreover, density functional theory (DFT) and classical molecular dynamics simulations (MD) were used to obtain a detailed picture of the intermolecular interactions within the fluid, at short and long ranges, and of other relevant features leading to the structure of the studied system. The whole study leads to a fluid's picture in which carbon disulfide hinders the development of NMP/NMP intermolecular dipolar interactions, thus increasing the monomer population. We should remark that some properties reported in this work are in remarkable disagreement with previously reported studies, the most important one being the positive excess molar volume in the whole pressure-temperature range studied, which contrasts with the negative values reported in the literature. Previously reported properties are hardly justified with a coherent molecular level picture, whereas the whole collection of properties reported in this work leads to a more reasonable fluid's structure. 56 refs., 17 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Adsorption of pure carbon dioxide on wet Argonne coals at 328.2 K and pressures up to 13.8 MPa

Carbon dioxide (CO{sub 2}) adsorption isotherms were measured on five different rank coals at 328.2 K and pressures up to 13.8 MPa using a volumetric method. Specifically, Beulah Zap, Illinois no.6, Pocahontas No.3, Upper Freeport, and Wyodak coals from the Argonne premium coal sample program were used for these isotherm measurements. These newly acquired data are compared to our previous data on dry coals. As expected, the adsorption on the wet coals is lower than that on the dry coals. At 7 MPa, Pocahontas, Upper Freeport, Illinois no. 6, Wyodak, and Beulah Zap coals exhibited, respectively, about 19, 17, 48, 76, and 79% reduction in the amount adsorbed on the wet coal when compared to the adsorption on the dry coal. These reductions in CO{sub 2} adsorption correlate positively with the amount of moisture present on the coal. The isotherms on wet coals were measured at their equilibrium moisture content. The adsorption isotherm for each of the wet coals exhibited a Gibbs adsorption maximum between 8 and 12 MPa and occurred at a higher pressure than that of the dry coal. The simplified local-density/Peng-Robinson model was used to correlate the adsorption data. The model was found capable of representing precisely the CO{sub 2} adsorption on both dry and wet coals. Specifically, the overall weighed average absolute deviation (WAAD) for the five dry and wet coals was 0.99 and 0.42, respectively. Nevertheless, more rigorous accounting for the water interactions with the coal matrix and the competitive adsorption between water and CO{sub 2} would provide an even more realistic description of coal-bed gas adsorption phenomenon on wet coals. 43 refs., 10 figs., 9 tabs.

01 COAL, LIGNITE, AND PEAT↗

Carbonation and hydration characteristics of dry potassium-based sorbents for CO{sub 2} capture

Thermogravimetric apparatus (TGA) and X-ray diffraction (XRD) have been used to study the characteristics of potassium-based sorbents for CO{sub 2} capture. The carbonation reactivity of K{sub 2}CO{sub 3}.1.5H{sub 2}O and K{sub 2}CO{sub 3} dehydrated from K{sub 2}CO{sub 3}. 1.5H{sub 2}O was weak. However, K{sub 2}CO{sub 3} calcined from KHCO{sub 3} showed excellent carbonation capacity and no deactivation of sorbents during multiple cycles. The XRD results showed that the sample dehydrated from K{sub 2}CO{sub 3}1.5H{sub 2}O was K{sub 2}CO{sub 3} with structure of monoclinic crystal (PCNo.1). The carbonation products of PCNo.1 included K{sub 2}CO{sub 3}.1.5H{sub 2}O and KHCO{sub 3}, and K{sub 2}CO{sub 3}. 1.5H{sub 2}O was the main product. Correspondingly, K{sub 2}CO{sub 3} with structure of hexagonal crystal (PCNo.2) was the product calcined from KHCO{sub 3}, and the main carbonation product of PCNo.2 was KHCO{sub 3}. The byproduct of K{sub 4}H{sub 2}(CO{sub 3})3.1.5H{sub 2}O for PCNo.2 would affect the carbonation processes. Hydration tests confirmed the two hypotheses: the hydration reaction will first occur for K{sub 2}CO{sub 3} with structure of monoclinic crystal, and the carbonation reaction will first occur for K{sub 2}CO{sub 3} with structure of hexagonal crystal. The reaction principles were analyzed by product and the relevant reactions. This investigation can be used as basic data for dry potassium-based sorbents capturing CO{sub 2} from flue gas. 20 refs., 7 figs.

01 COAL, LIGNITE, AND PEAT↗

Characterization of ash deposition and heat transfer behavior of coals during combustion in a pilot-scale facility and full-scale utility

Experimental measurements as well as theoretical models were used to investigate the impact of mineral matter of three coals on ash deposition and heat transfer for pulverized coal fired boilers. The ash deposition experiments were conducted in a pulverized fuel combustion pilot-scale facility and a full-scale unit. A mathematical model with input from computer-controlled scanning electron microscopy analysis of coal minerals was used to predict the effect of ash deposition on heat transfer. The predicted deposit thickness and heat flux from the model are shown to be consistent with the measurements in the test facility. The model differentiates the coals according to the deposits they form and their effect on heat transfer. The heat transfer predictions in the full-scale unit were found to be most suitable for the water wall under the furnace nose. The study demonstrates that the measurements in a full-scale unit can differ significantly from those in pilot-scale furnaces due to soot-blowing operations. 9 refs., 12 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Fly ash properties and mercury sorbent affect mercury release from curing concrete

The release of mercury from concrete containing fly ashes from various generator boilers and powdered activated carbon sorbent used to capture mercury was measured in laboratory experiments. Release of gaseous mercury from these concretes was less than 0.31% of the total quantity of mercury present. The observed gaseous emissions of mercury during the curing process demonstrated a dependency on the organic carbon content of the fly ash, with mercury release decreasing with increasing carbon content. Further, lower gaseous emissions of mercury were observed for concretes incorporating ash containing activated carbon sorbent than would be expected based on the observed association with organic carbon, suggesting that the powdered activated carbon more tightly binds the mercury as compared to unburned carbon in the ash. Following the initial 28-day curing interval, mercury release diminished with time. In separate leaching experiments, average mercury concentrations leached from fly ash concretes were less than 4.1 ng/L after 18 h and 7 days, demonstrating that less than 0.02% of the mercury was released during leaching. 25 refs., 4 figs., 5 tabs.

01 COAL, LIGNITE, AND PEAT↗

CO{sub 2} adsorption-based separation by metal organic framework (Cu-BTC) versus zeolite (13X)

The potential for the metal organic framework (MOF) Cu-BTC to selectively adsorb and separate CO{sub 2} is considered. Isotherms for CO{sub 2}, CH{sub 4}, and N{sub 2} were measured from 0 to 15 bar and at temperatures between 25 and 105{sup o}C. The isotherms suggest a much higher working capacity (x4) for CO{sub 2} adsorption on Cu-BTC relative to the benchmark zeolite 13X over the same pressure range. Higher CO{sub 2}/N{sub 2} and CO{sub 2}/CH{sub 4} selectivities in the higher pressure range (1-15 bar) and with lower heats of adsorption were also demonstrated. Cu-BTC was observed to be stable in O{sub 2} at 25{sup o}C, but its crystallinity was reduced in humid environments. The CO{sub 2} adsorption capacity was progressively reduced upon cyclic exposure to water vapor at low relative humidity (<30%), but leveled out at 75% of its original value after several water adsorption/desorption cycles. 27 refs., 1 fig.

01 COAL, LIGNITE, AND PEAT↗

Study on the effect of heat treatment and gasification on the carbon structure of coal chars and metallurgical cokes using fourier transform Raman spectroscopy

Differences in the development of carbon structures between coal chars and metallurgical cokes during high-temperature reactions have been investigated using Raman spectroscopy. These are important to differentiate between different types of carbons in dust recovered from the top gas of the blast furnace. Coal chars have been prepared from a typical injectant coal under different heat-treatment conditions. These chars reflected the effect of peak temperature, residence time at peak temperature, heating rate and pressure on the evolution of their carbon structures. The independent effect of gasification on the development of the carbon structure of a representative coal char has also been studied. A similar investigation has also been carried out to study the effect of heat-treatment temperature (from 1300 to 2000{sup o}C) and gasification on the carbon structure of a typical metallurgical coke. Two Raman spectral parameters, the intensity ratio of the D band to the G band (I{sub D}/I{sub G}) and the intensity ratio of the valley between D and G bands to the G band (I{sub V}/I{sub G}), have been found useful in assessing changes in carbon structure. An increase in I{sub D}/I{sub G} indicates the growth of basic graphene structural units across the temperature range studied. A decrease in I{sub V}/I{sub G} appears to suggest the elimination of amorphous carbonaceous materials and ordering of the overall carbon structure. The Raman spectral differences observed between coal chars and metallurgical cokes are considered to result from the difference in the time-temperature history between the raw injectant coal and the metallurgical coke and may lay the basis for differentiation between metallurgical coke fines and coal char residues present in the dust carried over the top of the blast furnace. 41 refs., 17 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Prediction of Chinese coal ash fusion temperatures in Ar and H{sub 2} atmospheres

The ash fusion temperatures (AFTs) of 21 typical Chinese coal ash samples and 60 synthetic ash samples were measured in Ar and H{sub 2} atmospheres. The computer software package FactSage was used to calculate the temperatures corresponding to different proportions of the liquid phase and predict the phase equilibria of synthetic ash samples. Empirical liquidus models were derived to correlate the AFTs under both Ar and H{sub 2} atmospheres of 60 synthetic ash samples, with their liquidus temperatures calculated by FactSage. These models were used to predict the AFTs of 21 Chinese coal ash samples in Ar and H{sub 2} atmospheres, and then the AFT differences between the atmospheres were analyzed. The results show that, for both atmospheres, there was an apparently linear correlation and good agreement between the AFTs of synthetic ash samples and the liquidus temperatures calculated by FactSage (R > 0.89, and {sigma} < 30{sup o}C). These models predict the AFTs of coal ash samples with a high level of accuracy (SE < 30{sup o}C). Because the iron oxides in coal ash samples fused under a H{sub 2} atmosphere are reduced to metallic iron and lead to changes of mineral species and micromorphology, the AFTs in a H{sub 2} atmosphere are always higher than those with an Ar atmosphere. 34 refs., 9 figs., 7 tabs.

01 COAL, LIGNITE, AND PEAT↗

Effect of fuel type and deposition surface temperature on the growth and structure of an ash deposit collected during co-firing of coal with sewage sludge and sawdust

Blends of a South African bituminous 'Middleburg' coal, a municipal sewage sludge, and a sawdust have been fired in the slagging reactor to examine the effect of the added fuel on the slagging propensity of the mixtures. Uncooled ceramic probes and air-cooled metal probes were used to examine the influence of the deposition surface temperature on the growth and structureof the deposits. The initial stages of slagging were in a high-temperature range of 1100-1300{sup o}C and a low-temperature range of 550-700{sup o}C. Laboratory ash, ash sampled on the deposition probes, and ash collected in the cyclone have been analyzed using the X-ray fluorescence technique. The electron probe microanalysis (EPMA) of the embedded resin deposit probes have been performed to determine the thickness, structure, porosity, and chemical composition in different layers of the deposit. Distinct differences in structures of the deposits collected using the uncooled ceramic probes and air-cooled steal probes were observed. Glassy, easily molten deposits collected on uncooled ceramic deposition probes are characteristic for co-firing of municipal sewage sludge with coal. Porous, sintered, but easily removable deposits of the same fuel blend have been collected on the air-cooled metal deposition probes. The addition of sawdust does not negatively influence the deposition behavior. Loose, easy removable deposits have been sampled on air-cooled metal deposition probes during co-firing of coal-sawdust blends. The mass of the deposit sampled at lower deposition surface temperatures (550-700{sup o}C) was always larger than the mass sampled at higher surface temperatures (1100-1300{sup o}C). 12 refs., 6 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Use of oscillatory shear rheometry and thermogravimetric analysis to examine the microstructural changes during coal pyrolysis/carbonization for the prediction of IRSID strength indices

During pyrolysis and carbonization of coal, the viscoelastic properties vary across a wide range, with complex viscosity ({eta}*) decreasing to as low as 100 Pa s before increasing to approximately 10{sup 8} Pa s and phase angle {delta} varying from close to 90{sup o} (Newtonian liquid) down to 0{sup o} (Hookean solid). A new rheometry method has been developed that combines tests using 25 and 8 mm plates to enable measurements of the entire resolidification process. When combined with thermogravimetric analysis, the method has provided new insights into the mechanisms leading to high and low IRSID I40 strength indices. Although coals with very different volatile matter contents have similar rates of volatile release above 475{sup o}C, viscoelastic properties above this temperature are highly variable. From a study of 13 coals, all coals for which {delta} < 55{sup o} at 475{sup o}C had an I40 index < 44%, while all coals for which {delta} > 65{sup o} at 475 {sup o}C had an I40 index > 44%. It is thought that, when {delta} < 55{sup o}, the material is less able to deform and accommodate the loss of mass/volume, causing it to crack/fissure. However, when the {delta} > 65{sup o} and stays high until higher temperatures, the material is able to contract as volatiles are released without fissuring, ultimately leading to a higher I40 index. A relationship between the final storage modulus (G') of the material and the I10 index was also found, whereby a low G' corresponded to a high I10 index. Greater understanding of the relationships between viscoelasticity and pore/fissure network development could enable more precise relationships to be developed, ultimately leading to improved methods for predicting coke quality and devising strategies to make high-quality coke from various sources. 12 refs., 13 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Kinetics and {sup 13}C NMR study of oxygen incorporation into PVC- and pitch-derived materials

The kinetics of oxygen incorporation into a PVC-derived material with pitch-like characteristics was studied by isothermal thermogravimetric analysis at temperatures ranging from 200 to 270{sup o}C. Activation energy, E{sub a}, pre-exponential factor, A, and rate constants, kT, were obtained from the weight-gain curves recorded during reactions of the material with molecular oxygen, which were analyzed following a kinetic first-order model. The numerical values obtained were E{sub a} = 100.5 kJ/mol and A = 1.6 x 1010 h{sup -1}. The extent of the oxidation at a fixed temperature was monitored by elemental analysis, and the chemical changes in the materials were followed by solid-state {sup 13}C NMR. The study was next extended to the chars obtained from three coal tar pitches with different softening points (55, 85, and 110{sup o}C). Comparisons were then established between the determined kinetic parameters and the chemical/structural aspects and compositions of each analyzed material. 23 refs., 7 figs., 3 tabs,

01 COAL, LIGNITE, AND PEAT↗

Carbon-centered free radicals in particulate matter emissions from wood and coal combustion

Electron paramagnetic resonance (EPR) spectroscopy was used to measure the free radicals in the particulate matter (PM) emissions from wood and coal combustion. The intensity of radicals in PM dropped linearly within two months of sample storage and stabilized after that. This factor of storage time was adjusted when comparing radical intensities among different PM samples. An inverse relationship between coal rank and free radical intensities in PM emissions was observed, which was in contrast with the pattern of radical intensities in the source coals. The strong correlation between intensities of free radical and elemental carbon in PM emissions suggests that the radical species may be carbon-centered. The increased g-factors, 2.0029-2.0039, over that of purely carbon-centered radicals may indicate the presence of vicinal oxygen heteroatom. The redox and biology activities of these carbon-centered radicals are worthy of evaluation. 22 refs., 4 figs., 1 tab.

01 COAL, LIGNITE, AND PEAT↗

Effect of additives on the reduction of PM2.5 emissions during pulverized coal combustion

Two bituminous coals used in coal-fired power plants were mixed with either Ca- or Mg-based chemical additives. Coals and the mixtures were burnt in a laboratory-scale drop tube furnace, respectively. The impact of the additives on the transformations of coal minerals, as well as on the emissions of particulate matter with an aerodynamic diameter smaller than 2.5 {mu}m (PM2.5), was investigated. The generated ash particles were collected using a cyclone combined with a low-pressure impactor. The physical and chemical properties of these ash particles were analyzed. The results indicate that the addition of chemical additives can affect the mineral transformation process, and thus, control the emissions of PM2.5 and PM1 during combustion. In particular, additives have a considerable impact on the particle size distribution and chemical composition of PM, wherein it improves the degree of coalescence of submicron and fine mineral particles, which reduces PM2.5 emissions. The effects of additive on the reduction of PM2.5 emissions depend on the type of coals being used. 17 refs., 8 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Chlorine in solid fuels fired in pulverized fuel boilers sources, forms, reactions, and consequences: a literature review

Chlorine is a significant source of corrosion and deposition, both from coal and from biomass, and in PF boilers. This investigation was designed to highlight the potential for corrosion risks associated with once-through units and advanced cycles. The research took the form of a detailed literature investigation to evaluate chlorine in solid fuels: coals of various ranks and origins, biomass fuels of a variety of types, petroleum cokes, and blends of the above. The investigation focused upon an extensive literature review of documents dating back to 1991. The focus is strictly corrosion and deposition. To address the deposition and corrosion issues, this review evaluates the following considerations: concentrations of chlorine in available solid fuels including various coals and biomass fuels, forms of chlorine in those fuels, and reactions - including reactivities - of chlorine in such fuels. The assessment includes consideration of alkali metals and alkali earth elements as they react with, and to, the chlorine and other elements (e.g., sulfur) in the fuel and in the gaseous products of combustion. The assessment also includes other factors of combustion: for example, combustion conditions including excess O{sub 2} and combustion temperatures. It also considers analyses conducted at all levels: theoretical calculations, bench scale laboratory data and experiments, pilot plant experiments, and full scale plant experience. Case studies and plant surveys form a significant consideration in this review. The result of this investigation focuses upon the concentrations of chlorine acceptable in coals burned exclusively, in coals burned with biomass, and in biomass cofired with coal. Values are posited based upon type of fuel and combustion technology. Values are also posited based upon both first principles and field experience. 86 refs., 8 figs., 7 tabs.

01 COAL, LIGNITE, AND PEAT↗

Influence of combustion conditions and coal properties on physical properties of fly ash generated from pulverized coal combustion

To develop combustion technology for upgrading the quality of fly ash, the influences of the coal properties, such as the size of pulverized coal particles and the two-stage combustion ratio during the combustion, on the fly ash properties were investigated using our test furnace. The particle size, density, specific surface area (obtained by the Blaine method), and shape of fly ash particles of seven types of coal were measured. It was confirmed that the size of pulverized coal particles affects the size of the ash particles. Regarding the coal properties, the fuel ratio affected the ash particle size distribution. The density and shape of the ash particles strongly depended on their ash size. Our results indicated that the shape of the ash particles and the concentration of unburned carbon affected the specific surface area. The influence of the two-stage combustion ratio was limited. 8 refs., 13 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Use of a predictive model for the impact of cofiring coal/biomass blends on slagging and fouling propensity

The paper describes an investigation of slagging and fouling effects when cofiring coal/biomass blends by using a predictive model for large utility boilers. This model is based on the use a zone computational method to determine the midsection temperature profile throughout a boiler, coupled with a thermo-chemical model, to define and assess the risk of elevated slagging and fouling levels during cofiring of solid fuels. The application of this prediction tool was made for a 618 MW thermal wall-fired pulverized coal boiler, cofired with a typical medium volatile bituminous coal and two substitute fuels, sewage sludge and sawdust. Associated changes in boiler efficiency as well as various heat transfer and thermodynamic parameters of the system were analyzed with slagging and fouling effects for different cofiring ratios. The results of the modeling revealed that, for increased cofiring of sewage sludge, an elevated risk of slagging and high-temperature fouling occurred, in complete contrast to the effects occurring with the utilization of sawdust as a substitute fuel. 30 refs., 9 figs.,1 tab.

01 COAL, LIGNITE, AND PEAT↗

Activated carbons from coal/pitch and polyethylene terephthalate blends for the removal of phenols from aqueous solutions

Blends of two bituminous coals and a coal-tar pitch (CTP) with polyethylene terephthalate (PET) were evaluated as precursors of activated carbons (ACs). The intensity of the interactions between the raw materials, coal/CTP and PET during copyrolysis was closely observed by means of thermogravimetric analysis. In addition, the homogeneity of the carbon matrix of the chars produced at 800{sup o}C in a horizontal oven was studied by polarized light optical microscopy. Activated carbons were prepared from single components and their blends (1:1 w/w) by subjecting them to carbonization up to 800{sup o}C in a horizontal oven and then activation with steam at 800{sup o}C to 50% burnoff. The porous structure of the ACs was determined by sorption of N{sub 2} at 77 K and of CO{sub 2} at 273 K. The PET-containing blends produced microporous activated carbons with a maximum BET surface area of nearly 1100 m{sup 2} g{sup -1} and a maximum micropore size distribution of 0.6-0.8 nm in the case of the AC from the CTP/PET blend. The addition of PET to a bituminous coal was compared with the preoxidation of coal P in air as a way to reduce thermoplasticity and to promote the development of the porous structure. The modification of bituminous coals by PET appeared to be more effective than conventional coal preoxidation treatment. The resultant ACs were tested by measuring their effectiveness in removing phenols from an aqueous solution. The adsorption of p-chlorophenol (PCP) by the ACs prepared from the PET-containing blends was slightly higher than for the commercial activated carbon. The ability to adsorb PCP was found to be related to the volume of the super-micropores.

01 COAL, LIGNITE, AND PEAT↗