Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LAND”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Handling Qualities Assessment of Manual Lunar Landing with Display Augmentation

Research and development is being conducted to support data-driven design decisions for manual control and human involvement in the lunar landing task under the Human Landing System (HLS) program within the Artemis campaign. A human-in-the-loop simulator evaluation of the manual control of a lunar landing vehicle in the final approach and landing phase was conducted at NASA Langley Research Center in the Lunar Flight Deck simulator using the Altair Design and Analysis Cycle (DAC)-2 government reference vehicle. The objective was to perform a direct comparison of control law types with display aiding for various rotational control powers being considered under HLS. Ten subjects (four NASA test pilots and six current pilot astronauts) provided Cooper-Harper ratings, NASA Task Load Index workload ratings, and qualitative comments. The piloting task was to assume manual control of the vehicle (including vertical descent rate) at 150 m above the landing zone, fly to a redesignated landing target (which was up to 75 m radially from the center of the landing zone) and to touch down within a position accuracy of 5m. The data showed that the display augmentation in the form of a “hover cue” significantly improved the pilot’s ability to control translation and create satisfactory handling qualities for otherwise sluggish configurations; however, the investigation also showed that display augmentation is not a panacea. Handling qualities problems, including pilot-induced oscillations, and higher workload for the lowest control powers can still be evident.

Lynda Kramer↗

Periodic Orbits As Viable Landing Solutions with an Abort Option at Europa

Moons of the outer planets offer some of the greatest potential scientific treasures in the solar system, yet they are exceedingly hard to reach. A previous work found many low-energy landing trajectories to various moons in the solar system by studying the unstable manifolds of Lyapunov, vertical, and halo periodic orbits. A potential shortcoming of this approach is the lack of abort options for a landing mission. If anything goes wrong prior to landing, there may not be an solution if the spacecraft has already departed the periodic orbit. Similarly, a solution which could return to its initially planned landing site could also perform observation flybys prior to landing to ensure the safety of the site. In the current work, we discuss a new strategy for finding periodic orbits that tangentially intersect the surface of Europa and are themselves either stable or nearly-stable. These qualities may allow certain periodic orbits to act as their own abort solutions or to closely observe their landing sites prior to landing. 18 such periodic orbits that have been identified so far are presented here.

Martin, W. Lo↗

Integrated Precision Landing Performance and Technology Assessments of a Human- Scale Mars Lander Using a Generalized Simulation Framework

Human-scale missions to Mars will likely require multiple landers delivered precisely to designated locations. The current NASA human Mars reference architecture assumes delivery of three 25 t payloads from a 1- or 5-Sol orbit to the surface with a landing precision of 50 m to ensure logistics are located near the habitat. While initial navigation estimates improve with on-orbit ground tracking, errors increase during post-deorbit coast. Likewise, Mars atmospheric variability and forecasting uncertainty means that the entry vehicle guidance, navigation, and control systems must be robust to accommodate landing during any time of day or Mars year, including during dust storms. Precision landing technologies are currently being assessed to determine if onboard navigation sensors are sufficient to enable the landing accuracy required or if additional navigation aids such as surface or orbiting beacons will be needed. This study evaluates the system performance requirements to meet the desired landing accuracy for the reference vehicle design and entry, descent, and landing concept of operations. A detailed six degree-of-freedom integrated performance simulation framework is used to perform the assessment and demonstrate that under current assumptions, onboard navigation sensors are sufficient to support precision landing.

Chen, Po-Ting↗

Investigating the Response of Land-Atmosphere Interactions and Feedbacks to Spatial Representation of Irrigation in a Coupled Modeling Framework

The transport of water, heat, and momentum from the surface to the atmosphere is dependent in part on the 10 characteristics of the land surface. Together with the model physics, parameterization schemes, and parameters employed, land datasets determine the spatial variability in land surface states (i.e., soil moisture and temperature) and fluxes. Despite the importance of these datasets, they are often chosen out of convenience or regional limitations without due assessment of their impacts on model results. Irrigation is an anthropogenic form of land heterogeneity that has been shown to alter the land surface energy balance, ambient weather, and local circulations. As such, irrigation schemes are becoming more 15 prevalent in weather and climate models with rapid developments in dataset availability and parameterization scheme complexity. Thus, to address pragmatic issues related to modeling irrigation, this study uses a high-resolution, regional coupled modeling system to investigate the impacts of irrigation dataset selection on land-atmosphere (L-A) coupling using a case study from the Great Plains Irrigation Experiment (GRAINEX) field campaign. The simulations are assessed in the context of irrigated versus non-irrigated regions, subregions across the irrigation gradient, and sub-grid scale process 20 representation in coarser scale models. The results show that L-A coupling is sensitive to the choice of irrigation dataset and resolution and that the irrigation impact on surface fluxes and near surface meteorology can be dominant, conditioned on the details of the irrigation map (i.e., boundaries, heterogeneity, etc), or minimal. A consistent finding across several analyses was that even a low percentage of irrigation fraction (i.e., 4-16%) can have significant local and downstream atmospheric impacts (e.g., lower PBL height), suggesting that representation of boundaries and heterogeneous areas within irrigated 25 regions is particularly important for the modeling of irrigation impacts on the atmosphere in this model. When viewing the simulations presented here as a proxy for ‘ideal’ tiling in a Earth System Model scale gridbox, the results show that some ‘tiles’ will reach critical nonlinear moisture and planetary boundary layer (PBL) thresholds that could be important for clouds and convection, implying that heterogeneity resulting from irrigation should be taken into consideration in new sub-grid land-atmosphere exchange parameterizations.

Patricia Lawston-Parker↗

Accurate Assessment of Land-Atmosphere Coupling in Climate Models Requires High Frequency Data Output

Land-atmosphere (L-A) interactions are important for understanding convective processes, climate feedbacks, the development and perpetuation of droughts, heatwaves, pluvials, and other land-centred climate anomalies. Local L-A coupling (LoCo) metrics capture relevant L-A processes, highlighting the impact of soil and vegetation states on surface flux partitioning, and the impact of surface fluxes on boundary layer (BL) growth, development, and entrainment of air above the BL. A primary goal of the Climate Process Team on Coupling Land and Atmospheric Subgrid Parameterizations (CLASP) is parameterizing and characterizing the impact of subgrid heterogeneity in global and regional earth system models (ESMs) to improve the connection between land and atmospheric states and processes. A critical step in achieving that aim is the incorporation of L-A metrics, especially LoCo metrics, into climate model diagnostic process streams. However, because land-atmosphere interactions span time scales of minutes (e.g., turbulent fluxes), hours (e.g., BL growth and decay), days (e.g., soil moisture memory), and seasons (e.g., variability of behavioural regimes between soil moisture and latent heat flux), with multiple processes of interest happening in different geographic regions at different times of year, there is not a single metric that captures all the modes, means, and methods of interaction between the land and the atmosphere. And while monthly means of most of the LoCo-relevant variables are routinely saved from ESM simulations, data storage constraints typically preclude routine archival of the hourly data that would enable the calculation of all LoCo metrics. Here we outline a reasonable data request that would allow for adequate characterization of sub-daily coupling processes between the land and the atmosphere, preserving enough sub-daily output to describe, analyse, and better understand L-A coupling in modern climate models. A secondary request involves embedding calculations within the models to determine mean properties in and above the BL to further improve characterization of model behaviour. Higher-frequency model output will (i) allow for more direct comparison with observational field campaigns on process-relevant time scales, (ii) enable demonstration of inter-model spread in L-A coupling processes, and (iii) aid in targeted identification of sources of deficiencies and opportunities for improvement of the models.

Kirsten L. Findell↗

Changes in Land Cover and Terrestrial Biogeochemistry

Direct changes in land use by humans are contributing to radiative forcing by altering land cover and therefore albedo, contributing to climate change (Ch. 2: Physical Drivers of Climate Change). This forcing is spatially variable in both magnitude and sign; globally averaged, it is negative (climate cooling; Figure 2.3). Climate changes, in turn, are altering the biogeochemistry of land ecosystems through extended growing seasons, increased numbers of frost-free days, altered productivity in agricultural and forested systems, longer fire seasons, and urban-induced thunderstorms. , Changes in land use and land cover interact with local, regional, and global climate processes. The resulting ecosystem responses alter Earth’s albedo, the carbon cycle, and atmospheric aerosols, constituting a mix of positive and negative feedbacks to climate change (Figure 10.1 and Chapter 2, Section 2.6.2). , Thus, changes to terrestrial ecosystems or land cover are a direct driver of climate change and they are further altered by climate change in ways that affect both ecosystem productivity and, through feedbacks, the climate itself. The following sections describe advances since the Third National Climate Assessment (NCA3) in scientific understanding of land cover and associated biogeochemistry and their impacts on the climate system.

Hibbard, Katherine A.↗

MapSpace: POI-based Multi-Scale Global Land Use Modeling

Accurate and up-to-date land use maps are important to the study of human-environment interactions, urban morphology, environmental justice, etc. Traditional land use mapping approaches involve several surveys and expert knowledge of the region to be mapped. While traditional approaches generate accurate and authoritative maps, it is expensive and takes a long time to develop a new version of map. Besides, such maps have region-specific spatial embedding, making them difficult to benchmark and compare against other land use maps. This work introduces a scalable POI-based land use modeling approach to generate global land use maps at multiple spatial scales and different semantic granularities. In addition, our land use maps adhere to a unified land use categories and can be compared for accuracy and precision.

Thakur, Gautam Malviya↗

The Land Sparing, Water Surface Use Efficiency, and Water Surface Transformation of Floating Photovoltaic Solar Energy Installations

Floating photovoltaic solar energy installations (FPVs) represent a new type of water surface use, potentially sparing land needed for agriculture and conservation. However, standardized metrics for the land sparing and resource use efficiencies of FPVs are absent. These metrics are critical to understanding the environmental and ecological impacts that FPVs may potentially exhibit. Here, we compared techno-hydrological and spatial attributes of four FPVs spanning different climatic regimes. Next, we defined and quantified the land sparing and water surface use efficiency (WSUE) of each FPV. Lastly, we coined and calculated the water surface transformation (WST) using generation data at the world’s first FPV (Far Niente Winery, California). The four FPVs spare 59,555 m2 of land and have a mean land sparing ratio of 2.7:1 m2 compared to ground-mounted PVs. Mean direct and total capacity-based WSUE is 94.5 ± 20.1 SD Wm−2 and 35.2 ± 27.4 SD Wm−2, respectively. Direct and total generation-based WST at Far Niente is 9.3 and 13.4 m2 MWh−1 yr−1, respectively; 2.3 times less area than ground-mounted utility-scale PVs. Our results reveal diverse techno-hydrological and spatial attributes of FPVs, the capacity of FPVs to spare land, and the utility of WSUE and WST metrics.

14 SOLAR ENERGY↗

Connecting Satellite Observations with Water Cycle Variables Through Land Data Assimilation: Examples Using the NASA GEOS-5 LDAS

A land data assimilation system (LDAS) can merge satellite observations (or retrievals) of land surface hydrological conditions, including soil moisture, snow, and terrestrial water storage (TWS), into a numerical model of land surface processes. In theory, the output from such a system is superior to estimates based on the observations or the model alone, thereby enhancing our ability to understand, monitor, and predict key elements of the terrestrial water cycle. In practice, however, satellite observations do not correspond directly to the water cycle variables of interest. The present paper addresses various aspects of this seeming mismatch using examples drawn from recent research with the ensemble-based NASA GEOS-5 LDAS. These aspects include (1) the assimilation of coarse-scale observations into higher-resolution land surface models, (2) the partitioning of satellite observations (such as TWS retrievals) into their constituent water cycle components, (3) the forward modeling of microwave brightness temperatures over land for radiance-based soil moisture and snow assimilation, and (4) the selection of the most relevant types of observations for the analysis of a specific water cycle variable that is not observed (such as root zone soil moisture). The solution to these challenges involves the careful construction of an observation operator that maps from the land surface model variables of interest to the space of the assimilated observations.

Land data assimilation↗

Land-atmosphere coupling and climate prediction over the U.S. Southern Great Plains

Biases in land-atmosphere coupling in climate models can contribute to climate prediction biases, but land models are rarely evaluated in the context of this coupling. Here, we tested land-atmosphere coupling and explored effects of land surface parameterizations on climate prediction in a single-column version of the National Center for Atmospheric Research Community Earth System Model (CESM1.2.2) and an off-line Community Land Model (CLM4.5). The correlation between leaf area index (LAI) and surface evaporative fraction (ratio of latent to total turbulent heat flux) was substantially underpredicted compared to observations in the U.S. Southern Great Plains, while the correlation between soil moisture and evaporative fraction was overpredicted by CLM4.5. To estimate the impacts of these errors on climate prediction, we modified CLM4.5 by prescribing observed LAI, increasing soil resistance to evaporation, increasing minimum stomatal conductance, and increasing leaf reflectance. The modifications improved the predicted soil moisture-evaporative fraction (EF) and LAI-EF correlations in off-line CLM4.5 and reduced the root-mean-square error in summer 2 m air temperature and precipitation in the coupled model. The modifications had the largest effect on prediction during a drought in summer 2006, when a warm bias in daytime 2 m air temperature was reduced from +6°C to a smaller cold bias of -1.3°C, and a corresponding dry bias in precipitation was reduced from -111 mm to -23 mm. The role of vegetation in droughts and heat waves is underpredicted in CESM1.2.2, and improvements in land surface models can improve prediction of climate extremes.

54 ENVIRONMENTAL SCIENCES↗

Quantifying the sensitivity of ephemeral streams to land disturbance activities in arid ecosystems at the watershed scale

Large areas of public lands administered by the Bureau of Land Management and located in arid regions of the southwestern United States are being considered for the development of utility-scale solar energy facilities. Land-disturbing activities in these desert, alluvium-filled valleys have the potential to adversely affect the hydrologic and ecologic functions of ephemeral streams. Regulation and management of ephemeral streams typically falls under a spectrum of federal, state, and local programs, but scientifically based guidelines for protecting ephemeral streams with respect to land-development activities are largely nonexistent. This study developed an assessment approach for quantifying the sensitivity to land disturbance of ephemeral stream reaches located in proposed solar energy zones (SEZs). The ephemeral stream assessment approach used publicly-available geospatial data on hydrology, topography, surficial geology, and soil characteristics, as well as highresolution aerial imagery. These datasets were used to inform a professional judgment-based score index of potential land disturbance impacts on selected critical functions of ephemeral streams, including flow and sediment conveyance, ecological habitat value, and groundwater recharge. The total sensitivity scores (sum of scores for the critical stream functions of flow and sediment conveyance, ecological habitats, and groundwater recharge) were used to identify highly sensitive stream reaches to inform decisions on developable areas in SEZs. Total sensitivity scores typically reflected the scores of the individual stream functions; some exceptions pertain to groundwater recharge and ecological habitats. The primary limitations of this assessment approach were the lack of high-resolution identification of ephemeral stream channels in the existing National Hydrography Dataset, and the lack of mechanistic processes describing potential impacts on ephemeral stream functions at the watershed scale.The primary strength of this assessment approach is that it allows watershed-scale planning for low-impact development in arid ecosystems; the qualitative scoring of potential impacts can also be adjusted to accommodate new geospatial data, and to allow for expert and stakeholder input into decisions regarding the identification and potential avoidance of highly sensitive stream reaches.

Arid ecosystems↗

Interactive effects of precipitation, temperature, and grazing pressure on the net ecosystem carbon balance of grazing lands across the continental United States

Grazing lands cover approximately one-third of the contiguous United States, support much of the nation's beef production, and are an important component of the U.S. terrestrial carbon budget. In this study, we quantified net ecosystem carbon balance (NECB), the net status of grazing lands as a carbon sink (C-sink) or source (C-source) and a key determinant of soil health and productivity. Our primary objective was to synthesize multiple years of annual NECB across heterogeneous grazing lands across the continental U.S and evaluate annual NECB against physical drivers (mean annual precipitation (MAP), mean annual temperature (MAT), vegetation, and moisture condition) and management practices (grazing pressure index (GPI) and fertilization history). We hypothesized that (1) NECB is higher in mesic and fertilized grasslands; (2) NECB increases with MAP and MAT but decreases with GPI; and (3) interactive effects exist among MAP, MAT, and GPI. Using carbon fluxes measured by eddy covariance towers and methane emissions including both enteric methane and manure derived from stocking rates across seven USDA Long-term Agroecosystem Research Network sites, we found: (1) grazing lands were a C-sink or carbon neutral at most sites; (2) vegetation type, moisture conditions, or fertilization had no significant effect on NECB; (3) NECB increased with MAP and MAT, but decreased with a higher GPI; and (4) MAT had a significant positive effect on NECB when MAP exceeded 750 mm (greater water availability). The effect of GPI on NECB was significantly negative when MAP was below 1000 mm, significantly negative when MAT < 12 °C and significantly positive when MAT > 16 °C. Thus, most grazing lands in our study acted as C-sinks unless water deficit, low temperature, or heavy grazing were interactively present. Understanding how climate and management influence NECB of grazing lands is key to maintaining resilient agroecosystems that secure beef production and sustain rural prosperity.

LTAR↗

Methods for land use impact assessment: A review

Many types of methods to assess land use impact have been developed. Nevertheless a systematic synthesis of all these approaches is necessary to highlight the most commonly used and most effective methods. Given the growing interest in this area of research, a review of the different methods of assessing land use impact (LUI) was performed using bibliometric analysis. One hundred eighty seven articles of agricultural and biological science, and environmental sciences were examined. According to our results, the most frequently used land use assessment methods are Life-Cycle Assessment, Material Flow Analysis/Input–Output Analysis, Environmental Impact Assessment and Ecological Footprint. Comparison of the methods allowed their specific features to be identified and to arrive at the conclusion that a combination of several methods is the best basis for a comprehensive analysis of land use impact assessment. - Highlights: • We identified the most frequently used methods in land use impact assessment. • A comparison of the methods based on several criteria was carried out. • Agricultural land use is by far the most common area of study within the methods. • Incentive driven methods, like LCA, arouse the most interest in this field.

54 ENVIRONMENTAL SCIENCES↗

The vulnerabilities of agricultural land and food production to future water scarcity

Rapidly increasing populations coupled with increased food demand requires either an expansion of agricultural land or sufficient production gains from current resources. However, in a changing world, reduced water availability might undermine improvements in crop and grass productivity and may disproportionately affect different parts of the world. Using multi-model studies, the potential trends, risks and uncertainties to land use and land availability that may arise from reductions in water availability are examined here. In addition, the impacts of different policy interventions on pressures from emerging risks are examined. Results indicate that globally, approximately 11% and 10% of current crop- and grass-lands could be vulnerable to reduction in water availability and may lose some productive capacity, with Africa and the Middle East, China, Europe and Asia particularly at risk. While uncertainties remain, reduction in agricultural land area associated with dietary changes (reduction of food waste and decreased meat consumption) offers the greatest buffer against land loss and food insecurity.

54 ENVIRONMENTAL SCIENCES↗

Response to “how robust are reductions in modeled estimates from GTAP-BIO of the indirect land use change induced by conventional biofuels?”

Malins et al. (2020) recently published "How robust are reductions in modeled estimates from GTAP-BIO of the indirect land use change induced by conventional biofuels?", provided their narrative from the model improvements in GTAP-BIO over time, made several critical points regarding this model, and argued that the implemented improvements in this model tended to decrease Induce Land Use Changes (ILUC) emissions. Furthermore, they also provided several critical points regarding the Carbon Calculator for Land Use Change from Biofuels Production (CCLUB) emissions model. In this response to Malins et al. we address these critiques point-by-point by providing our detailed responses to key issues: 1) the GTAP-BIO model and its improvements over time; 2) the inclusion of cropland pasture in the model; 3) the observed land use changes in the US that have been the bases for improvements in GTAP-BIO model, 4) the time trends in corn price and yield to challenge the concept of the yield to price response; 5) some sources of land intensification in crop production; 6) the FAO notifications with respect to the comparison between harvested area and arable land; and 7) the GTAP-BIO results for multiple cropping. We also provided responses to Malins et al. critical points regarding the CCLUB emissions model. We hope that this response letter will open more constructive discussion among the LUC modeling community to remain focused on the big picture regarding agriculture's role as a very effective GHG mitigation tool that can shape the new policies to govern the production and consumption of biofuels.

09 BIOMASS FUELS↗

Land-based resources for engineered carbon dioxide removal in the United States exceed the expected needs

Gigatonne-scale atmospheric carbon dioxide removal (CDR), alongside deep emission cuts, is critical to stabilizing the climate. However, some of the most scalable CDR technologies are also the most land intensive. Here, we examine whether adequate land resources exist in the contiguous United States to meet CDR targets when prioritizing grid emissions reduction, food production, and the protection of sensitive ecosystems. We focus on biomass carbon removal and storage (BiCRS) and direct air capture and storage (DACS) and show that suitable lands exceed the expected needs: 37.6 million hectares of land are available for BiCRS, resulting in 0.26 GtCO 2 of CDR/year, and 34 million hectares are suitable for wind- and solar-powered DACS, resulting in 4.8 GtCO 2 of CDR/year if facilities are co-located with geologic CO 2 storage. We identify biomass and energy supply hotspots to meet CDR targets while ensuring land protection and minimizing land competition.

54 ENVIRONMENTAL SCIENCES↗

Secondary Structures of Ubiquitin Ions Soft-Landed onto Self-Assembled Monolayer Surfaces

The secondary structures of multiply charged ubiquitin ions soft-landed onto self-assembled monolayer (SAM) surfaces were studied using in situ infrared reflection-absorption spectroscopy (IRRAS). Two charge states of ubiquitin, 5+ and 13+, were mass selected separately from a mixture of different charge states produced by electrospray ionization (ESI). The low 5+ charge state represents a native-like folded state of ubiquitin, while the high 13+ charge state assumes an extended, almost linear conformation. Each of the two charge states was soft-landed onto a CH 3- and COOH-terminated SAM of alkylthiols on gold (HSAM and COOH-SAM). HSAM is a hydrophobic surface known to stabilize helical conformations of soft-landed protonated peptides, whereas COOH-SAM is a hydrophilic surface that preferentially stabilizes β-sheet conformations. IRRAS spectra of the soft-landed ubiquitin ions were acquired as a function of time during and after ion soft-landing. Similar to smaller peptide ions, helical conformations of ubiquitin are found to be more abundant on HSAM, while the relative abundance of β-sheet conformations increases on COOH-SAM. The initial charge state of ubiquitin also has a pronounced effect on its conformation on the surface. Specifically, on both surfaces, a higher relative abundance of helical conformations and lower relative abundance of β-sheet conformations is observed for the 13+ charge state compared to the 5+ charge state. Time-resolved experiments indicate that the α-helical band in the spectrum of the 13+ charge state slowly increases with time on the HSAM surface and decreases in the spectrum of the 13+ charge state on COOH-SAM. These results further support the preference of the hydrophobic HSAM surface toward helical conformations and demonstrate that soft-landed protein ions may undergo slow conformational changes during and after deposition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Biofuels, land and water : a systems approach to sustainability.

There is a strong societal need to evaluate and understand the sustainability of biofuels, especially because of the significant increases in production mandated by many countries, including the United States. Sustainability will be a strong factor in the regulatory environment and investments in biofuels. Biomass feedstock production is an important contributor to environmental, social, and economic impacts from biofuels. This study presents a systems approach where the agricultural, energy, and environmental sectors are considered as components of a single system, and environmental liabilities are used as recoverable resources for biomass feedstock production. We focus on efficient use of land and water resources. We conducted a spatial analysis evaluating marginal land and degraded water resources to improve feedstock productivity with concomitant environmental restoration for the state of Nebraska. Results indicate that utilizing marginal land resources such as riparian and roadway buffer strips, brownfield sites, and marginal agricultural land could produce enough feedstocks to meet a maximum of 22% of the energy requirements of the state compared to the current supply of 2%. Degraded water resources such as nitrate-contaminated groundwater and wastewater were evaluated as sources of nutrients and water to improve feedstock productivity. Spatial overlap between degraded water and marginal land resources was found to be as high as 96% and could maintain sustainable feedstock production on marginal lands. Other benefits of implementing this strategy include feedstock intensification to decrease biomass transportation costs, restoration of contaminated water resources, and mitigation of greenhouse gas emissions.

09 BIOMASS FUELS↗