Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Krypton”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Microporous Crystalline Membranes for Kr/Xe Separation: Comparison between AlPO-18, SAPO-34, and ZIF-8

Herein we demonstrate the separation ability of AlPO-18 membranes for Kr/Xe gas mixtures. AlPO-18 membranes separated Kr/Xe mixtures with average Kr/Xe separation selectivity of 6.4 and unprecedented high average Kr permeance of 1.6 × 10-7 mol/m2·s·Pa. Diffusivity difference between Kr and Xe was identified as the dominant separation mechanism. We compared the separation performance of AlPO-18 membranes versus two other types of microporous crystalline membranes, namely, SAPO-34 and ZIF-8. SAPO-34 membranes displayed the best overall separation performance, while AlPO-18 membranes displayed the highest Kr permeances. We identified the key factors affecting both the separation selectivity and permeance. For these three distinctive types of microporous materials, the presence of rigid micropores with size lying between Kr and Xe atomic sizes, lower Xe/Kr uptakes (adsorption selectivity), and lower concentration of nonselective pores led to the highest observed s Kr/Xe separation selectivities among these three microporous crystals. The Kr permeances for these three microporous crystalline membranes decreased exponentially as membrane thickness increased.

microporous crystals, membranes, gas separations, ↗

Direct Observation of Xe and Kr Adsorption in a Xe-Selective Microporous Metal–Organic Framework

The cryogenic separation of noble gases is energy-intensive and expensive, especially when low concentrations are involved. Metal organic frameworks containing polarizing groups within their pore spaces are predicted to be efficient Xe/Kr solid state adsorbents but no experimental insights on the nature of the Xe-network interaction is available to date. Here we report a new microporous metal organic framework (designated SBU2) that is selective toward Xe over Kr at ambient conditions, with Xe/Kr selectivity of about 10 and Xe capacity of 37.1 wt% at 298 K. Results of single crystal diffraction show Xe selectivity may be attributed to the specific geometry of the pores, forming cages built with phenyl rings and enriched with polar -OH groups, both serving as strong adsorption sites for polarizable Xe gas. The Xe/Kr separation in SBU2 was investigated with experimental and computational breakthrough methods. These experiments showed that Xe broke through the column after 3 min, followed by Kr at 4.5 min after injection of gases mixture, which confirmed that SBU2 has a real practical potential for separating Xe from Kr. Computational calculations show that SBU2 capacity and adsorption selectivity is comparable to the best-performing unmodified MOFs such as Ni-MOF-74 or Co Formate.

Xenon, Krypton↗

Atmospheric 81 Kr as an Integrator of Cosmic-Ray Flux on the Hundred-Thousand-Year Time Scale

The atmospheric abundance of 81 Kr is a global integrator of cosmic rays. It is insensitive to climate shifts, geographical variations, and short-term solar cycle activity, making it an ideal standard to test models of cosmic-ray flux on the time scale of 10 5 years. In this work, we present the first calculation of absolute 81 Kr production rates in the atmosphere, and a measurement of the atmospheric 81 Kr/Kr abundance via the Atom Trap Trace Analysis method. The measurement result significantly deviates from previously reported values. The agreement between measurement and model prediction supports the current understanding of the production mechanisms. Additionally, the calculated 81 Kr atmospheric inventory over the past 1.5 Myr provides a more accurate input function for radiokrypton dating.

58 GEOSCIENCES↗

Metal–organic framework with optimally selective xenon adsorption and separation

Nuclear energy is considered among the most viable alternatives to our current fossil fuel based energy economy.1 The mass-deployment of nuclear energy as an emissions-free source requires the reprocessing of used nuclear fuel to mitigate the waste.2 One of the major concerns with reprocessing used nuclear fuel is the release of volatile radionuclides such as Xe and Kr. The most mature process for removing these radionuclides is energy- and capital-intensive cryogenic distillation. Alternatively, porous materials such as metal-organic frameworks (MOFs) have demonstrated the ability to selectively adsorb Xe and Kr at ambient conditions.3-8 High-throughput computational screening of large databases of porous materials has identified a calcium-based nanoporous MOF, SBMOF-1, as the most selective for Xe over Kr.9,10 Here, we affirm this prediction and report that SBMOF-1 exhibits by far the highest Xe adsorption capacity and a remarkable Xe/Kr selectivity under relevant nuclear reprocessing conditions. The exceptional selectivity of SBMOF-1 is attributed to its pore size tailored to Xe and its dense wall of atoms that constructs a binding site with a high affinity for Xe, as evident by single crystal X-ray diffraction and molecular simulation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

High contrast Kr gas jet K{alpha} x-ray source for high energy density physics experiments

A high contrast 12.6 keV Kr K{alpha} source has been demonstrated on the petawatt-class Titan laser facility using strongly clustering Kr gas jet targets. The contrast ratio (K{alpha} to continuum) is 65, with a competitive ultrashort pulse laser to x-ray conversion efficiency of 10{sup -5}. Filtered shadowgraphy indicates that the Kr K{alpha} and K{beta} x rays are emitted from a roughly 1x2 mm{sup 2} emission volume, making this source suitable for area backlighting and scattering. Spectral calculations indicate a typical bulk electron temperature of 50-70 eV (i.e., mean ionization state 13-16), based on the observed ratio of K{alpha} to K{beta}. Kr gas jets provide a debris-free high energy K{alpha} source for time-resolved diagnosis of dense matter.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Duplex multiwire proportional x-ray detector for multichord time-resolved soft x-ray and electron temperature measurements on T-10 tokamak

Compact 64-channel multiwire proportional chamber is successfully used on T-10 and TCV tokamaks as a continuous-current soft x-ray detectors. The duplex multiwire proportional x-ray detector is a new generation of these detectors. It has been designed for simultaneous multichord measurement of plasma soft x-ray emissivity in a two spectral ranges and determination of the electron temperature by the two-absorber method. The detector consists of two identical multiwire proportional chambers filled by 90%Kr+10%CH{sub 4} gas mixture at atmospheric pressure. The first multiwire chamber has 64 channels. The second multiwire chamber (installed behind the first one) has 32 channels. Both chambers view the plasma through the one helium-filled slot-hole camera. Thus, the first multiwire chamber serves as an absorber filter for the second one. Such construction of the detector allows us in addition to soft x-ray measurements to provide measurement of the plasma core electron temperature with spatial resolution of about 2 cm and a time resolution of less than 50 {mu}s. The construction of the detector and experimental results illustrating the potential of the diagnostic are presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Impact of Kr gas mixing in oxygen plasma etching of ferroelectric poly(vinylidene fluoride-trifluoroethylene) copolymer films

Oxygen plasma etching characteristics of ferroelectric poly(vinylidene fluoride-trifluoroethylene) copolymer films are investigated. It was found in MFM (M: metal; F: ferroelectric) capacitors that plasma damage effects to the ferroelectric properties were insignificant when Au metal masks were used. On the contrary, C-V (capacitance versus voltage) characteristics were significantly degraded in plasma-etched MFIS (I: insulator; S: semiconductor) diodes. The origin of this phenomenon is speculated to be degradation of the SiO{sub 2}/Si interface by energetic oxygen ions and then mixing of Kr gas to the oxygen plasma is attempted to decrease the plasma damage.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-resolution imaging spectrometer for recording absolutely calibrated far ultraviolet spectra from laser-produced plasmas

An imaging spectrometer was designed and fabricated for recording far ultraviolet spectra from laser-produced plasmas with wavelengths as short as 155 nm. The spectrometer implements a Cassegrain telescope and two gratings in a tandem Wadsworth optical configuration that provides diffraction limited resolution. Spectral images were recorded from plasmas produced by the irradiation of various target materials by intense KrF laser radiation with 248 nm wavelength. Two pairs of high-resolution gratings can be selected for the coverage of two wavebands, one grating pair with 1800 grooves/mm and covering approximately 155-175 nm and another grating pair with 1200 grooves/mm covering 230-260 nm. The latter waveband includes the 248 nm KrF laser wavelength, and the former waveband includes the wavelength of the two-plasmon decay instability at (2/3) the KrF laser wavelength (165 nm). The detection media consist of a complementary metal oxide semiconductor imager, photostimulable phosphor image plates, and a linear array of 1 mm{sup 2} square silicon photodiodes with 0.4 ns rise time. The telescope mirrors, spectrometer gratings, and 1 mm{sup 2} photodiode were calibrated using synchrotron radiation, and this enables the measurement of the absolute emission from the laser-produced plasmas with temporal, spatial, and spectral resolutions. The spectrometer is capable of measuring absolute spectral emissions at 165 nm wavelength as small as 5x10{sup -7} J/nm from a plasma source area of 0.37 mm{sup 2} and with 0.4 ns time resolution.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Alternative to classic annealing treatments for fractally patterned TiO{sub 2} thin films

Titanium dioxide thin films have been deposited by reactive magnetron sputtering on glass and subsequently irradiated by UV radiation using a KrF excimer laser. The influence of the laser fluence (F) on the constitution and microstructure of the deposited films is studied for 0.05<F<0.40 J/cm{sup 2}. The diffraction data reveal that as deposited films are amorphous, while irradiated films present an anatase structure. Additional Raman spectroscopy study shows better crystal quality for the films irradiated with F<0.13 J/cm{sup 2}. The film morphology appears to be strongly modified after laser treatment. Atomic force microscopy and scanning electron microscopy measurements reveal fractally textured films presenting characteristics of high porosity and high specific surface area. Finally, contact angle analysis suggests hydrophobic or wetting behavior depending on F. In order to explain the laser-induced structuration mechanisms, we have successfully applied a fractal as well as the nucleation theories. We propose that electronics effects could be responsible for the observed crystallization.

36 MATERIALS SCIENCE↗

{gamma}-ray Spectroscopy of Proton Drip-Line Nuclei in the A{approx}130 Region using SPIRAL beams

A fusion-evaporation experiment has been performed with a SPIRAL {sup 76}Kr radioactive beam in order to study the deformation of rare-earth nuclei near the proton drip-line. The experimental setup consisted in the EXOGAM {gamma}-array, coupled to the light-charged particles (LCP) DIAMANT detector and to the VAMOS heavy-ion spectrometer. The difficulties inherent to such measurements are enlightened. The coupling between EXOGAM and DIAMANT has been used to decrease the huge background caused by the radioactivity of the beam. It further permits assigning new {gamma}-ray transitions to specific residual nuclei. A {gamma}-ray belonging to the {sup 130}Pm level scheme has thus been observed for the first time.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Probing the shell structure near {sup 54}Ca and {sup 100}Sn

In this contribution results will be reported from two recent experiments at the GSI Fragmentseparator (FRS). The first experiment is using one-nucleon knockout with relativistic fragments from a 500 AMeV {sup 86}Kr primary beam to probe the single-particle structure in {sup 49}Ca and {sup 55}Ti. From the one-neutron knockout in the neutron-rich nuclei {sup 50}Ca and the N = 34 nucleus {sup 56}Ti cross sections and momentum distributions were deduced allowing the determination of angular momentum values and spectroscopic factors for individual states.In the second experiment decay spectroscopy of {sup 100}Sn and nuclei in its vicinity was performed. The nuclei of interest were produced using the fragmentation of a 1 AGeV {sup 124}Xe primary beam. The RISING gamma-ray detector array was used in close geometry to detect gamma-decay following isomeric as well as beta decays. Aside from the production of more that 200 {sup 100}Sn nuclei, several new isotopes and isomers were discovered.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Laser-induced convection nanostructures on SiON/Si interface

The homogenized beam of an excimer KrF laser has been used to form rectangular millimeter-scale holes of vertical walls in the {approx}1 {mu}m thick silicon-oxynitride (SiON) thin film deposited on Si <111> wafer. The regular rectangular craters in SiON layer have the flat bottom surface reaching the SiON/Si interface. At the same time horizontal thermal gradient causes the formation of the nanoscale Marangoni convection structures at the SiON/Si interface. The inhomogeneous pattern of the roll structures can be divided into domains of regular, irregular, and chaotic organizations. The roll diameter is about 200 nm while their average wavelength, {lambda}, is, {approx}2 {mu}m, i.e., about ten times larger than the laser wavelength, and decreases with increasing number of pulses. Numerical simulation of the Marangoni domain roll structures based on the simple Swift-Hohenberg equation has reproduced all observed types of the roll organization, including those that show the evolution of dislocations from the Eckhause instability.

36 MATERIALS SCIENCE↗

Planar patterned media fabricated by ion irradiation into CrPt{sub 3} ordered alloy films

Planar patterned media using CrPt{sub 3} ordered alloy films were fabricated by Ar{sup +} or Kr{sup +} ion irradiation through nanoimprinted or electron beam lithography made masks. CrPt{sub 3} ordered alloy film on fused quartz substrate exhibits a large perpendicular anisotropy of 5x10{sup 6} erg/cc and a large coercivity of 12 kOe, and we found that its magnetic order (magnetization) was completely suppressed by a quite low Ar{sup +} or Kr{sup +} ion dose of about 1-2x10{sup 14} ions/cm{sup 2}. Magnetic force microscope image of the ion-beam patterned CrPt{sub 3} with a bit size of 90x90 nm showed clear magnetic contrast in nonirradiated regions, while no magnetic contrast in irradiated regions. The read-back waveform taken from an ion-beam patterned CrPt{sub 3} disk with 600 nm patterning pitch showed sharp signal transition between irradiated and nonirradiated regions, which indicates the possibility of high-density planar patterned media using CrPt{sub 3} ordered alloy.

36 MATERIALS SCIENCE↗

Measurement of the energy distribution of an intense electron beam in an external magnetic field

An energy analyzer device has been developed which utilizes a series of stacked foils and Rogowski current monitors to the measure time resolved current of an intense electron beam. The energy distribution of the electron beam is unfolded from measured current ratios using computer simulations. This device is particularly useful where electron beams are guided by external magnetic fields which may make other electron energy measurement techniques difficult. This technique was used to determine the energy distribution of a 550 keV, 95 kA electron beam as it propagates in the gas mixture of a high power KrF laser. The resulting energy distributions at various depths in the gas are in agreement with three-dimensional particle-in-cell simulations providing confidence in the measurement technique.

43 PARTICLE ACCELERATORS↗

Barrier Distribution of Quasi-elastic Backward Scattering of {sup 48}Ti, {sup 54}Cr, {sup 56}Fe, {sup 64}Ni, {sup 70}Zn and {sup 86}Kr on {sup 208}Pb

In order to study the nucleus-nucleus interaction in Pb-based cold fusion, we have measured excitation functions for quasi-elastic scattering of {sup 48}Ti, {sup 54}Cr, {sup 56}Fe, {sup 64}Ni, {sup 70}Zn and {sup 86}Kr projectiles on {sup 208}Pb target at backward angles. The barrier distributions were derived from the first derivative of measured quasi-elastic scattering cross sections relative to the Rutherford scattering cross section. The centroids of the barrier distributions show a deviation from several predicted barrier heights toward the low energy side. The shape of the barrier distributions is well reproduced by the results of a coupled-channel calculation taking account of the coupling effects of two phonon excitations of the quadrupole vibration for the projectiles and of the octupole vibration for the {sup 208}Pb target.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Particle Identification in the NIMROD-ISiS Detector Array

Interest in the influence of the neutron-to-proton (N/Z) ratio on multifragmenting nuclei has demanded an improvement in the capabilities of multi-detector arrays as well as the companion analysis methods. The particle identification method used in the NIMROD-ISiS 4{pi} array is described. Performance of the detectors and the analysis method are presented for the reaction of {sup 86}Kr+{sup 64}Ni at 35 MeV/u.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Microstructure and texture developments in multiple pulses excimer laser crystallization of GaAs thin films

In this paper, we observed and characterized changes in the microstructure and texture during recrystallization and grain growth in polycrystalline GaAs thin films using multiple pulses crystallization by a KrF excimer laser. Films of various thicknesses were studied to assess film thickness and laser energy density effects. In the low temperature domain corresponding to the partial melting regime, normal grain growth was observed. In the superlateral grain growth regime the increase in grain size was notable with grain sizes much greater than the film thickness. A bimodal grain size distribution emerged implying the onset of secondary grain growth. The change in grain size distribution, texture, and grain boundary texture were analyzed using scanning electron microscopy and electron backscatter diffraction. It was found that grain growth is accompanied by a strengthening in (001) texture, indicating that the grain growth phenomenon is strain energy driven. The experimental results are explained with theory of secondary grain growth in thin films.

36 MATERIALS SCIENCE↗