Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Inverter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Mathematical and computational studies of the stability of axisymmetric annular capillary free surfaces

Of principal interest is the stability of a perfectly wetting liquid in an inverted, vertical, right circular-cylindrical container having a concave spheroidal bottom. The mathematical conditions that the contained liquid be in stable static equilibrium are derived, including those for the limiting case of zero contact angle. Based on these results, a computational investigation is carried out for a particular container that is used for the storage of liquid fuels in NASA Centaur space vehicles, for which the axial ratio of the container bottom is 0.724. It is found that for perfectly wetting liquids the qualitative nature of the onset of instability changes at a critical liquid volume, which for the Centaur fuel tank corresponds to a mean fill level of approximately 0.503 times the tank's radius. Small-amplitude periodic sloshing modes for this tank were calculated; oscillation frequencies or growth rates are given for several Bond numbers and liquid volumes, for normal modes having up to six angular nodes.

Albright, N.↗
NASA NTRS1977

The atmosphere of Jupiter from earth-based and spacecraft observations in the thermal infrared

The temperature and cloud structure, relative abundances of H2 and He, and the global climatology of Jupiter's atmosphere have been deduced from Pioneer 10 and 11 infrared radiometer data, along with earth-based observations of the spectrum at 8-14 and 12-24 microns. The H2 and He abundances are near those expected from 'solar' composition. The effective planetary temperature is 125 + or - 3 K. Temperatures at 1.0 bar are near 165 K and drop to 100-110 K at 0.1 bar; an overlying thermal inversion reaches 133-145 K near 0.03 bar. Temperature profiles for various regions of the planet may be quite similar, with differences due to the presence or absence of a thick cloud near 0.7 bar, close to the temperature where NH3 saturation is expected. Remaining problems in the remote sounding of Jupiter's atmosphere are accurate calibration of the global energy balance, sounding in the presence of significant heterogeneity, and temperature recovery of the thermally inverted stratosphere.

Orton, G. S.↗
NASA NTRS1978

Wave production in an ultrarelativistic electron-positron plasma

In this paper we calculate the eigenmodes associated with an ultrarelativistic electron-positron beam traversing a low-energy electron-positron plasma under physical conditions that may exist along open magnetic field lines above pulsar polar caps. We assume that both beam and plasma are cold and charge neutral, and that magnetic field strength and particle density decrease as the cube of (1/R). In the superstrong magnetic fields near the stellar surface where cyclotron frequencies exceed plasma frequencies, electrostatic waves and associated transverse low-frequency waves are driven unstable by the two-stream type particle distribution. At larger distances above the stellar surface the slow beam cyclotron wave is driven unstable. At even greater radial distance (approximately when particle energy density exceeds magnetic energy density) both the Ordinary and Alfven modes become unstable. All of these instabilities can lead to generation of radiation. If the particle distribution as generated at the stellar surface, assumed to consist of two streams, is modified only by plasma effects, then electrostatic and associated transverse waves may only be unstable near the stellar surface. The beam cyclotron mode which is driven by a two-stream or an inverted particle distribution may be stable.

Hardee, P. E.↗
NASA NTRS1978

Extinction-sedimentation inversion technique for measuring size distribution of artificial fogs

In measuring the size distribution of artificial fog particles, it is important that the natural state of the particles not be disturbed by the measuring device, such as occurs when samples are drawn through tubes. This paper describes a method for carrying out such a measurement by allowing the fog particles to settle in quiet air inside an enclosure through which traverses a parallel beam of light for measuring the optical depth as a function of time. An analytic function fit to the optical depth time decay curve can be directly inverted to yield the size distribution. Results of one such experiment performed on artificial fogs are shown as an example. The forwardscattering corrections to the measured extinction coefficient are also discussed with the aim of optimizing the experimental design so that the error due to forwardscattering is minimized.

Deepak, A.↗
NASA NTRS1978

Analysis of stellar occultation data - Effects of photon noise and initial conditions

An occultation light curve can be analyzed to provide information about a planetary atmosphere. Temperature, pressure, and number density profiles for the atmosphere of Mars are derived from a series of boundary layer equations, which invert equal increments of altitude (as opposed to time) in order to predict the noise quality of the occultation. Numerical results are given for a noisy isothermal light curve, with special attention to error analysis.

French, R. G.↗
NASA NTRS1978

Stratospheric ozone measurement with an infrared heterodyne spectrometer

Measurements of a stratospheric ozone concentration profile are made by detecting infrared absorption lines with a heterodyne spectrometer. The infrared spectrometer is based on a line-by-line tunable CO2 lasers, a liquid-nitrogen cooled HgCdTe photomixer, and a 64-channel spectral line receiver. The infrared radiation from the source is mixed with local-oscillator radiation. The difference frequency signal in a bandwidth above and below the local-oscillator frequency is detected. The intensity in each sideband is found by subtracting sideband contributions. It is found that absolute total column density is 0.32 plus or minus 0.02 cm-atm with a peak mixing ratio at about 24 km. The (7,1,6)-(7,1,7) O3 line center frequency is identified as 1043.1772/cm. Future work will involve a number of ozone absorption lines and measurements of diurnal variation. Completely resolved stratospheric lines may be inverted to yield concentration profiles of trace constituents and stratospheric gases.

Abbas, M. M.↗
NASA NTRS1978

Error analysis of an aircraft-mounted backscatter ultraviolet experiment

An experiment has been proposed to measure the zenith sky intensity and directly transmitted solar flux density at several wavelengths in the near ultraviolet from an aircraft platform located at about 15 km. From these measurements, the vertical distribution of ozone above the platform is to be inferred, by inversion of the equation of radiative transfer. The present study is an analysis of the errors to be expected in a real experiment, due to atmospheric fluctuations, numerical procedures, and ignorance of various parameters necessary for the calculation of the intensities and fluxes to be expected. These errors are found to vary from 17% at the shorter wavelengths to about 3% at the longer wavelengths used. It is shown elsewhere (Twomey et al., 1977) that unacceptable levels of instability and non-uniqueness of results will be found if the error levels in the measurements upon which we wish to invert exceed 3%. On the basis of this, it is concluded that with the present instrumentation and the present knowledge of necessary ancillary parameters, this experiment will not be feasible.

Rabinoff, R.↗
NASA NTRS1977

Cratering motions and structural deformation in the rim of the Prairie Flat multiring explosion crater

Cratering motions and structural deformation are described for the rim of the Prairie Flat multiring crater, 85.5 m across and 5.3 m deep, which was formed by the detonation of a 500-ton TNT surface-tangent sphere. The terminal displacement and motion data are derived from marker cans and velocity gages emplaced in drill holes in a three-dimensional matrix radial to the crater. The integration of this data with a detailed geologic cross section, mapped from deep trench excavations through the rim, provides a composite view of the general sequence of motions that formed a transiently uplifted rim, overturned flap, inverted stratigraphy, downfolded rim, and deformed strata in the crater walls. Preliminary comparisons with laboratory experimental cratering and with numerical simulations indicate that explosion craters of the Prairie Flat-type generated by surface and near-surface energy sources tend to follow predictable motion sequences and produce comparable structural deformation. More specifically, central uplift and multiring impact craters with morphologies and structures comparable to Prairie Flat are inferred to have experienced similar deformational histories of the rim, such as uplift, overturning, terracing, and downfolding.

Roddy, D. J.↗
NASA NTRS1978

A complementary DMOS-VMOS IC structure

A new complementary MOS structure has been fabricated consisting of a p-channel DMOS transistor and an n-channel double-diffused VMOS transistor. The transconductance of each transistor was between 0.85-0.98 of the theoretical transconductance. The threshold voltages have been adjusted by either ion implantation or by adjusting the diffusion profiles. The inverter operation is similar to that of standard CMOS.

Jhabvala, M.↗
NASA NTRS1977

Crater morphometry from bistatic radar

In the present paper, bistatic radar techniques are discussed which can be used to identify and measure the dimensions of anomalously scattering regions on planetary surfaces. The morphometric potential of the bistatic radar is demonstrated by an example in which spectral features in Apollo 14 echoes are correlated with parts of the lunar crater Lansberg. Crater dimensions, including width of interior walls and extent of the ejecta blanket, are determined from a quantitative analysis. It is shown that the technique can be generalized for scattering areas at arbitrary positions with respect to the ground track, and could easily be inverted for characterization of a 'blind' target, such as Venus.

Simpson, R. A.↗
NASA NTRS1978

Line shapes /absorption coefficients/ for satellites and inversion of the data to obtain interaction potentials

Line shapes for cesium broadened by xenon and neopentane have been measured in an absorption cell. The growth of the red satellites, both primary and secondary, were studied on the first five principal series doublets and on the first S-D forbidden doublet. An inversion scheme based on a nearest-neighbor density was employed to invert the measured line shapes and obtain difference potential estimates. It is apparent from the inversion scheme that minor inflections in the difference potential map into strong features in the frequency plane and that contrary to popular assumption, absolute extrema may not be necessary for satellite interpretation. Strength effects observed on the forbidden satellites also demonstrate that the radial dependence of the dipole moment must be accounted for in certain cases.

Exton, R. J.↗
NASA NTRS1978

Numerical aerodynamic simulation facility

Critical to the advancement of computational aerodynamics capability is the ability to simulate flows about three-dimensional configurations that contain both compressible and viscous effects, including turbulence and flow separation at high Reynolds numbers. Analyses were conducted of two solution techniques for solving the Reynolds averaged Navier-Stokes equations describing the mean motion of a turbulent flow with certain terms involving the transport of turbulent momentum and energy modeled by auxiliary equations. The first solution technique is an implicit approximate factorization finite-difference scheme applied to three-dimensional flows that avoids the restrictive stability conditions when small grid spacing is used. The approximate factorization reduces the solution process to a sequence of three one-dimensional problems with easily inverted matrices. The second technique is a hybrid explicit/implicit finite-difference scheme which is also factored and applied to three-dimensional flows. Both methods are applicable to problems with highly distorted grids and a variety of boundary conditions and turbulence models.

Bailey, F. R.↗
NASA NTRS1978

A user oriented microcomputer facility for designing linear quadratic Gaussian feedback compensators

A laboratory design facility for digital microprocessor implementation of linear-quadratic-Gaussian feedback compensators is described. Outputs from user interactive programs for solving infinite time horizon LQ regulator and Kalman filter problems were conditioned for implementation on the laboratory microcomputer system. The software consisted of two parts: an offline high-level program for solving the LQ Ricatti equations and generating associated feedback and filter gains and a cross compiler/macro assembler which generates object code for the target microprocessor system. A PDP 11/70 with a UNIX operating system was used for all high level program and data management, and the target microprocessor system is an Intel MDS (8080-based processor). Application to the control of a two dimensional inverted pendulum is presented and issues in expanding the design/prototyping system to other target machine architectures are discussed.

Houpt, P. K.↗
NASA NTRS1978

Measurements and predictions of flyover and static noise of a TF30 afterburning turbofan engine

The noise of the TF30 afterburning turbofan engine in an F-111 airplane was determined from static (ground) and flyover tests. A survey was made to measure the exhaust temperature and velocity profiles for a range of power settings. Comparisons were made between predicted and measured jet mixing, internal, and shock noise. It was found that the noise produced at static conditions was dominated by jet mixing noise, and was adequately predicted by current methods. The noise produced during flyovers exhibited large contributions from internally generated noise in the forward arc. For flyovers with the engine at nonafterburning power, the internal noise, shock noise, and jet mixing noise were accurately predicted. During flyovers with afterburning power settings, however, additional internal noise believed to be due to the afterburning process was evident; its level was as much as 8 decibels above the nonafterburning internal noise. Power settings that produced exhausts with inverted velocity profiles appeared to be slightly less noisy than power settings of equal thrust that produced uniform exhaust velocity profiles both in flight and in static testing.

Burcham, F. W., Jr.↗
NASA NTRS1978

Photovoltaic tests and applications project

The activities and accomplishments of the Photovoltaic Tests and Applications Project during the period April 1976 through June 1977 are summarized. Results of efforts to identify potential near-term photovoltaic applications and users are discussed, including the outcome of an extensive survey of Federal government agencies. The status of application experiments is presented. Various general engineering efforts are reported, including the design and construction of a photovoltaic Systems Test Facility. Efforts to develop a high efficiency 10 kVA self-commutated inverter and controller specifically designed for photovoltaic systems are also discussed. The results of a wide variety of activities in the area of photovoltaic measurements and standards are related. Documents generated by the Project during the reporting period are listed in an Appendix.

Source record↗
NASA NTRS1979

Experimental study of coaxial nozzle exhaust noise

Experimental results are presented for static acoustic model tests of various geometrical configurations of coaxial nozzles operating over a range of flow conditions. The geometrical configurations consisted of nozzles with coplanar and non-coplanar exit planes and various exhaust area ratios. Primary and secondary nozzle flows were varied independently over a range of nozzle pressure ratios from 1.4 to 3.0 and gas temperatures from 280 to 1100 K. Acoustic data are presented for the conventional mode of coaxial nozzle operation as well as for the inverted velocity profile mode. Comparisons are presented to show the effect of configuration and flow changes on the acoustic characteristics of the nozzles.

Goodykoontz, J. H.↗
NASA NTRS1979

Preliminary noise tradeoff study of a Mach 2.7 cruise aircraft

NASA computer codes in the areas of preliminary sizing and enroute performance, takeoff and landing performance, aircraft noise prediction, and economics were used in a preliminary noise tradeoff study for a Mach 2.7 design supersonic cruise concept. Aerodynamic configuration data were based on wind-tunnel model tests and related analyses. Aircraft structural characteristics and weight were based on advanced structural design methodologies, assuming conventional titanium technology. The most advanced noise prediction techniques available were used, and aircraft operating costs were estimated using accepted industry methods. The 4-engines cycles included in the study were based on assumed 1985 technology levels. Propulsion data was provided by aircraft manufacturers. Additional empirical data is needed to define both noise reduction features and other operating characteristics of all engine cycles under study. Data on VCE design parameters, coannular nozzle inverted flow noise reduction and advanced mechanical suppressors are urgently needed to reduce the present uncertainties in studies of this type.

Mascitti, V. R.↗