Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ISM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

ISMIP6: Ice Sheet Model Intercomparison Project for CMIP6

ISMIP6 (Ice Sheet Model Intercomparison Project for CMIP6) targets the Cryosphere in a Changing Climate and the Future Sea Level Grand Challenges of the WCRP (World Climate Research Program). Primary goal is to provide future sea level contribution from the Greenland and Antarctic ice sheets, along with associated uncertainty. Secondary goal is to investigate feedback due to dynamic ice sheet models. Experiment design uses and augment the existing CMIP6 (Coupled Model Intercomparison Project Phase 6) DECK (Diagnosis, Evaluation, and Characterization of Klima) experiments. Additonal MIP (Model Intercomparison Project)- specific experiments will be designed for ISM (Ice Sheet Model). Effort builds on the Ice2sea, SeaRISE (Sea-level Response to Ice Sheet Evolution) and COMBINE (Comprehensive Modelling of the Earth System for Better Climate Prediction and Projection) efforts.

CMIP6↗

Organic Nano-Grains in Comet 103P/Hartley 2: The Organic Glue of Porous Aggregate Grains?

The GNIRS instrument on the Gemini 8-­‐m telescope observed comet 103P/Hartley on 2010-­‐ Dec-­‐04UT, a month after the EPOXI Mission encounter, and detected the 3.3 and 3.4 um bands in emission. The 3.3/3.4 ratio and the broad band widths are consistent with experiments of heated (approximately 600 K) aliphatic carbon (-CH3, -CH2) thin films. For the 3.4 micron band to be in emission, the aliphatic bonds must be attached to a carrier possessing the strongly UV-­‐absorbing C=C aromatic rings, and these rings have to be less than 50-­‐100 carbon atoms (4-6 Angstrom) for attached -CH bonds to also generate a 3.3 micron-band in emission. Slightly larger (≥10Å) Very Small Grains (VSGs) can absorb single UV photons comparable to or exceeding their heat capacity, thermally fluctuate and release IR photon(s). The 3.3 micron and 3.4 micron bands observed by GNIRS suggest that organic macromolecules/ nano-­‐grains with both aliphatic and aromatic bonds are fluorescing/thermally fluctuating in the coma. Aliphatic and aromatic materials have been seen in Stardust samples and the primitive carbonaceous chondrite 'Tagish Lake'. The larger the ratio of the -CH2/-CH3 components of the aliphatic 3.4 micron band, the more 'primitive' the organic material. In a Stardust organic globule, some aliphatic bonds were transformed into aromatic bonds during the low dosage of Transmission Electron Microscope imaging. Conversely, lab experiments show irradiation of ices containing small PAHs generates aliphatic organics. Photo-­‐processing of ices also likely forms the ubiquitous aliphatic coatings that appear on the surfaces of all silicate subgrains constituting nine cometary interplanetary dust particles. The aliphatic coatings, dominated by -CH2, likely were important in sticking the aggregates together, and existed prior to incorporation of dust aggregates into comet nuclei. These comet aliphatics may be some of the sought-­‐after precursors to the more robust and complex organics studied as Insoluble Organic Matter in carbonaceous chondrites. Aliphatic coatings on submicron grains, however, will not be observable in absorption because they are fairly transparent, nor do the aliphatic carbonaceous coatings produce the 3.4 micron emission band because the particles they are attached to are too large (too many vibration modes). We must probe the nano-­‐sized organic carriers that undergo substantive thermal fluctuations in cometary comae and emit at 3.3 3.4 micron. Observations of the 3.3 and 3.4 micron emission features contribute to characterizing the evolution of organics prior to their incorporation into cometary nuclei as well as their rapid evolution in cometary comae, which in turn contributes to deepening our understanding of the evolution of organics on the surfaces of asteroids and outer icy bodies in our solar system. Studying organics in comets contributes to understanding the formation and evolution pathways of ISM organics through to the formation of the robust insoluble organic matter in meteorites. A'Hearn, M.F., et al. 2011, Science, 332, 1396; Bockelee-­‐Morvan, D. et al. 1995, Icarus, 116, 18; De Gregorio, B.T., et al. 2010, GCA, 74, 4454; Dello Russo, N., et al. 2011, ApJ, 734, L8; Dischler et al. 1983, Solid State Communications, 48, 105; Flynn, G., et al. 2010a, LPSC, 41, #1079; Flynn, G., et al. 2010b, COSPAR, 38, F31-­‐0012-­‐10; Flynn, G., Wirick, S. 2011, LPSC, 42, #1856; Fomenkova, et al. 1994, GCA 58, 4503; Matrajt, G., et al. 2013, ApJ, 765, 145; Schutte, et al. 1993, ApJ, 415, 397; Wooden, D.H. et al. 2011, EPSC-­‐DPS, 1557; Wooden, D.H. et al. 2013, submitted.

Stardust samples↗

In-Space Manufacturing Baseline Property Development

The In-Space Manufacturing (ISM) project at NASA Marshall Space Flight Center currently operates a 3D FDM (fused deposition modeling) printer onboard the International Space Station. In order to enable utilization of this capability by designer, the project needs to establish characteristic material properties for materials produced using the process. This is difficult for additive manufacturing since standards and specifications do not yet exist for these technologies. Due to availability of crew time, there are limitations to the sample size which in turn limits the application of the traditional design allowables approaches to develop a materials property database for designers. In this study, various approaches to development of material databases were evaluated for use by designers of space systems who wish to leverage in-space manufacturing capabilities. This study focuses on alternative statistical techniques for baseline property development to support in-space manufacturing.

Stockman, Tom↗

The Formation of Nucleobases from the Irradiation of Purine in Astophysical Ices and Comparisons with Meteorites.

N-heterocycles have been identified in meteorites and their extraterrestrial origins are suggested by isotopic ratio measurements. Although small N- heterocycles have not been detected in the interstellar medium (ISM), recent experiments in our lab have shown that the irradiation of the aromatic molecules like benzene (C6H6) and naphthalene (C10H8) in mixed molecular ices leads to the formation of O- and N-heterocyclic molecules. Among the class of N-heterocycles are the nucleobases, which are of astrobiological interest because they are the information bearing units of DNA and RNA. Nucleobases have been detected in meteorites [3-5], with isotopic signatures that are also consistent with an extraterrestrial origin. Three of the biologically relevant nucleobases (uracil, cytosine, and guanine) have a pyrimidine core structure while the remaining two (adenine and guanine) possess a purine core. Previous experiments in our lab have demonstrated that all of the bio-logical nucleobases (and numerous other molecules) with a pyrimidine core structure can be produced by irradiating pyrimidine in mixed molecular ices of several compositions [6-8]. In this work, we study the formation of purine-based molecules, including the nucleobases adenine, and guanine, from the ultraviolet (UV) irradiation of purine in ices consisting mixtures of H2O and NH3 at low temperature. The experiments are designed to simulate the astrophysical conditions under which these species may be formed in dense molecular clouds, protoplanetary disks, or on the surfaces of icy bodies in planetary systems.

Astrochemistry↗

Limitations of Reliability for Long-Endurance Human Spaceflight

Long-endurance human spaceflight - such as missions to Mars or its moons - will present a never-before-seen maintenance logistics challenge. Crews will be in space for longer and be farther way from Earth than ever before. Resupply and abort options will be heavily constrained, and will have timescales much longer than current and past experience. Spare parts and/or redundant systems will have to be included to reduce risk. However, the high cost of transportation means that this risk reduction must be achieved while also minimizing mass. The concept of increasing system and component reliability is commonly discussed as a means to reduce risk and mass by reducing the probability that components will fail during a mission. While increased reliability can reduce maintenance logistics mass requirements, the rate of mass reduction decreases over time. In addition, reliability growth requires increased test time and cost. This paper assesses trends in test time requirements, cost, and maintenance logistics mass savings as a function of increase in Mean Time Between Failures (MTBF) for some or all of the components in a system. In general, reliability growth results in superlinear growth in test time requirements, exponential growth in cost, and sublinear benefits (in terms of logistics mass saved). These trends indicate that it is unlikely that reliability growth alone will be a cost-effective approach to maintenance logistics mass reduction and risk mitigation for long-endurance missions. This paper discusses these trends as well as other options to reduce logistics mass such as direct reduction of part mass, commonality, or In-Space Manufacturing (ISM). Overall, it is likely that some combination of all available options - including reliability growth - will be required to reduce mass and mitigate risk for future deep space missions.

Owens, Andrew C.↗

Project RAMA: Reconstructing Asteroids Into Mechanical Automata

Many interesting ideas have been conceived for building space-based infrastructure in cislunar space. From O'Neill's space colonies, to solar power satellite farms, and even prospecting retrieved near earth asteroids. In all the scenarios, one thing remained fixed - the need for space resources at the outpost. To satisfy this need, O'Neill suggested an electromagnetic railgun to deliver resources from the lunar surface, while NASA's Asteroid Redirect Mission called for a solar electric tug to deliver asteroid materials from interplanetary space. At Made In Space, we propose an entirely new concept. One which is scalable, cost effective, and ensures that the abundant material wealth of the inner solar system becomes readily available to humankind in a nearly automated fashion. We propose the RAMA architecture, which turns asteroids into self-contained spacecraft capable of moving themselves back to cislunar space. The RAMA architecture is just as capable of transporting conventional-sized asteroids on the 10-meter length scale as transporting asteroids 100 meters or larger, making it the most versatile asteroid retrieval architecture in terms of retrieved-mass capability. This report describes the results of the Phase I study funded by the NASA NIAC program for Made In Space to establish the concept feasibility of using space manufacturing to convert asteroids into autonomous, mechanical spacecraft. Project RAMA, Reconstituting Asteroids into Mechanical Automata, is designed to leverage the future advances of additive manufacturing (AM), in-situ resource utilization (ISRU) and in-situ manufacturing (ISM) to realize enormous efficiencies in repeated asteroid redirect missions. A team of engineers at Made In Space performed the study work with consultation from the asteroid mining industry, academia, and NASA. Previous studies for asteroid retrieval have been constrained to studying only asteroids that are both large enough to be discovered, and small enough to be captured and transported using Earth-launched propulsion technology. Project RAMA is not forced into this constraint. The mission concept studied involved transporting a much larger approximately 50-meter asteroid to cislunar space. Demonstration of transport of a 50-meter-class asteroid has several ground-breaking advantages. First, the returned material is of an industrial, rather than just scientific, quantity (greater than 10,000 tonnes versus approximately10s of tonnes). Second, the "useless" material in the asteroid is gathered and expended as part of the asteroid's propulsion system, allowing the returned asteroid to be considerably "purer" than a conventional asteroid retrieval mission. Third, the infrastructure used to convert and return the asteroid is reusable, and capable of continually returning asteroids to cislunar space.

asteroids↗

Supportability Challenges, Metrics, and Key Decisions for Future Human Spaceflight

Future crewed missions beyond Low Earth Orbit (LEO) represent a logistical challenge that is unprecedented in human space flight. Astronauts will travel farther and stay in space for longer than any previous mission, far from timely abort or resupply from Earth. Under these conditions, supportability { defined as the set of system characteristics that influence the logistics and support required to enable safe and effective operations of systems { will be a much more significant driver of space system lifecycle properties than it has been in the past. This paper presents an overview of supportability for future human space flight. The particular challenges of future missions are discussed, with the differences between past, present, and future missions highlighted. The relationship between supportability metrics and mission cost, performance, schedule, and risk is also discussed. A set of pro- posed strategies for managing supportability is presented (including reliability growth, uncertainty reduction, level of repair, commonality, redundancy, In-Space Manufacturing (ISM) (including the use of material recycling and In-Situ Resource Utilization (ISRU) for spares and maintenance items), reduced complexity, and spares inventory decisions such as the use of predeployed or cached spares - along with a discussion of the potential impacts of each of those strategies. References are provided to various sources that describe these supportability metrics and strategies, as well as associated modeling and optimization techniques, in greater detail. Overall, supportability is an emergent system characteristic and a holistic challenge for future system development. System designers and mission planners must carefully consider and balance the supportability metrics and decisions described in this paper in order to enable safe and effective beyond-LEO human space flight.

Owens, Andrew C.↗

The Nature of Interstellar Organics and Their Relationship to the Solar System

Carbonaceous materials are a primary compo-nent of interstellar dust, forming in the outflow of carbon stars and the diffuse interstellar me-dium (DISM). Over time, the low density DISM is swept into dense molecular clouds, the principal formation sites and repositories of most interstellar molecules. Organic com-pounds created in these clouds are the first step towards the complex materials that help to make planets habitable. Ground- and space-based telescopic observations trace interstellar organics from the diffuse to dense interstellar clouds, revealing that organic material in the diffuse ISM is predominantly hydrocarbon in nature, possessing little N or O, with the C distributed between the aromatic and aliphatic forms. A remarkable similarity between the hydrocarbons in dust in our Galaxy to that of distant galaxies, indicates that this organic component of the DISM is widespread and may be an important universal reservoir of prebiotic organic carbon. Spectroscopy of background stars seen through quiescent dust in clouds with no star formation activity re-veals that chemistry occurs early-on. Mean-while, observations of certain asteroids, com-ets, interplanetary dust particles, planets and planetary satellites present an intricate inter-weaving of preserved interstellar components and those that have been subsequently altered. The composition ofinterstellar dust grains and the evolution of dust between dense clouds (where stars and planetary systems form) and the diffuse inter-stellar medium (where stardust components are ejected), will be presented in this workshop on Carbon in the Solar System.

Intersteller Organics↗

Electronically Excited States of Anistropically Extended Singly-Deprotonated PAH Anions

Polycyclic Aromatic Hydrocarbons (PAHs) play a significant role in the chemistry of the interstellar medium (ISM) as well as in hydrocarbon combustion. These molecules can have high levels of diversity with the inclusion of heteroatoms and the addition or removal of hydrogens to form charged or radical species. There is an abundance of data on the cationic forms of these molecules, but there have been many fewer studies on the anionic species. The present study focuses on the anionic forms of deprotonated PAHs. It has been shown in previous work that PAHs containing nitrogen heteroatoms (PANHs) have the ability to form valence excited states giving anions electronic absorption features. This work analyzes how the isoelectronic pure PAHs behave under similar structural constructions. Singly-deprotonated forms of benzene, naphthalene, anthracene, and teteracene classes are examined. None of the neutral-radicals possess dipole moments large enough to support dipole-bound excited states in their corresponding closed-shell anions. Even though the PANH anion derivatives support valence excited states for three-ringed structures, it is not until four-ringed structures of the pure PAH anion derivatives that valence excited states are exhibited. However, anisotropically-extended PAHs larger than tetracene will likely exhibit valence excited states. The relative energies for the anion isomers are very small for all of the systems in this study.

Theis, Mallory L.↗

The HR 4796A Debris System: Discovery of Extensive Exo-Ring Dust Material

The optically and IR-bright and starlight-scattering HR 4796A ringlike debris disk is one of the most- (and best-) studied exoplanetary debris systems. The presence of a yet-undetected planet has been inferred (or suggested) from the narrow width and inner/outer truncation radii of its r = 1farcs05 (77 au) debris ring. We present new, highly sensitive Hubble Space Telescope (HST) visible-light images of the HR 4796A circumstellar debris system and its environment over a very wide range of stellocentric angles from 0farcs32 (23 au) to ≈15'' (1100 au). These very high-contrast images were obtained with the Space Telescope Imaging Spectrograph (STIS) using six-roll PSF template–subtracted coronagraphy suppressing the primary light of HR 4796A, with three image-plane occulters, and simultaneously subtracting the background light from its close angular proximity M2.5V companion. The resulting images unambiguously reveal the debris ring embedded within a much larger, morphologically complex, and biaxially asymmetric exo-ring scattering structure. These images at visible wavelengths are sensitive to and map the spatial distribution, brightness, and radial surface density of micron-size particles over 5 dex in surface brightness. These particles in the exo-ring environment may be unbound from the system and interacting with the local ISM. Herein, we present a new morphological and photometric view of the larger-than-prior-seen HR 4796A exoplanetary debris system with sensitivity to small particles at stellocentric distances an order of magnitude greater than has previously been observed.

starlight-scattering HR 4796A↗

The Refractive Index of Amorphous and Crystalline Water Ice in the UV-vis

Amorphous solid water (ASW) is found on icy dust grains in the interstellar medium (ISM), as well as on comets and other icy objects in the outer solar system. The optical properties of ASW are thus relevant for many astrophysical environments, but in the ultraviolet–visible (UV–vis), its refractive index is not well constrained. Here, we introduce a new method based on UV–vis broadband interferometry to measure the wavelength dependent refractive index n(λ) of amorphous water ice from 10 to 130 K, i.e., for different porosities, in the wavelength range of 210–757 nm. We also present n(λ) for crystalline water ice at 150 K, which allows us to compare our new method with literature data. Based on this, a method to calculate n(λ, ρ) as a function of wavelength and porosity is reported. This new approach carries much potential and is generally applicable to pure and mixed ice, both amorphous and crystalline. The astronomical and physical–chemical relevance and future potential of this work are discussed.

Kofman, Vincent↗

Effectiveness of Redundant Communications Systems in Maintaining Operational Control of Small Unmanned Aircraft

As a part of NASA’s Unmanned Aircraft System (UAS) Traffic Management (UTM) research, a test was performed to evaluate the effectiveness of the redundant Command and Control (C2) communications system for maintaining operational control of small UAS in the airspace over a rural area. In the test, operators set up a primary and a secondary UAS C2 communications system, sent a maneuver command to an Unmanned Aircraft (UA) with and without a functioning primary system, then verified the execution of the sent command to confirm the operator control. Operators reported that the tested redundancy configurations were effective in maintaining operational control in the test airspace over rural locations. Since the next phase of UTM research focuses on operations in an urban area where an increased level of Radio Frequency (RF) activities occur compared to a rural area, four recommendations are provided to sustain the effectiveness of redundancy in urban operations. First, the operator should not include C2 systems that use the industrial, scientific, and medical (ISM) radio bands in redundancy configurations. Second, the operator should verify the RF characteristics of the intended operation area and examine the area’s radio noise floor. Third, the operator should monitor the availability, quality, and reliability of communications services used by a redundant system. Fourth, the small UAS community should adopt a standard set of contingency steps to handle the loss of C2 communications so that such events are managed in a consistent manner across the airspace. The insights from the test will be used to accommodate the FAA’s UAS integration effort.

Jung, Jaewoo↗

High-Resolution Mid-Infrared Molecular Line Survey of the Orion Hot Core

The basic building blocks of life are synthesized in space as part of the natural stellar evolutionary cycle, whereby elements ejected into the interstellar medium by dying stars are incorporated back into the dense clouds, which form the next generation of stars and planets. The formation of stars and planets are fundamental to the evolution of matter in the Universe as complex molecules are created and destroyed during this step. Understanding these processes will allow us to answer “What is the relation between the molecules we see in the ISM and the molecular inventory of Earth and the terrestrial planets in the Solar System?” Measuring and cataloging the inventory of organic molecules and understanding their evolution requires observations over a broad wavelength range (IR, MIR, FIR, (sub)mm, and radio) to cover all stages of this evolutionary cycle needed to link interstellar material to that delivered to planets. High-resolution molecular line surveys provide chemical inventories for star forming regions and are essential for studying their chemistry, kinematics and physical conditions. Previous high spectral resolution surveys have been limited to radio, sub-mm and FIR wavelengths; however, Mid-infrared observations are the only way to study symmetric molecules that have no dipole moment and thus cannot be detected in the (sub)mm line surveys from ALMA. Past midinfrared missions such as ISO and Spitzer had low to moderate resolving power that were only able to link broad features with particular molecular bands and could not resolve the individual rovibrational transitions. JWST will provide exceptional sensitivity in the MIR, but will also not have sufficient spectral resolution, which can lead to confusion in identifying the contribution from strong to moderate strength molecular species. We present new results from an on-going high resolution (R ~ 60,000) line survey of the Orion hot core between 12.5 - 28.3 μm and 7 - 8 μm, using the EXES instrument on the SOFIA airborne observatory. SOFIA's higher-resolution and smaller beam compared to ISO allows us to spatially and spectrally isolate the emission towards the hot core. This survey will provide the best infrared measurements (to date) of molecular column densities and physical conditions, providing strong constraints on the current chemical network models for star forming regions. This survey will greatly enhance the inventory of resolved line features in the MIR, making it an invaluable reference to be used by the JWST and ALMA scientific communities.

Rangwala, Naseem↗

From the Interstellar Medium to Ocean Worlds: new challenges for Laboratory Astrophysics

From the Interstellar Medium to Ocean Worlds: new challenges for Laboratory Astrophysics For the past 35+ years, laboratory experiments in Astrophysics have been focusing on identifying and understanding the molecular species and chemistry occurring in interstellar environments, such as the diffuse interstellar medium (ISM) and dense molecular clouds. A significant portion of these laboratory efforts concerns investigations of carbon-based molecules ranging in size from a single carbon atom (e.g., CO, CO2, H2CO) to large polycyclic aromatic hydrocarbon (PAH) molecules potentially consisting of more than one hundred carbon atoms as well as their reactions with H2O and other interstellar species. The laboratory facilities built to conduct these investigations are capable of monitoring the chemistry and measuring the spectra under a wide range of interstellar conditions (e.g., low temperatures and pressures). The past 15 years of space exploration revealed the presence of at least nine other Ocean Worlds, besides Earth, in our Solar System. These worlds include moons and dwarf planets, ice-covered surfaces, subsurface oceans, as well as geysers venting H2O and other compounds, including organics in at least one environment, into space. Although these worlds represent environments that are significantly different from those traditionally considered the realm of Laboratory Astrophysics, their facilities are well situated to provide insight into the chemistry occurring in and around these worlds as well as experimental data for the interpretation of observations from missions visiting these Ocean World. This presentation will discuss the areas where Laboratory Astrophysics can provide experimental data to help understand the chemistry, and mission data of Ocean Worlds, and the challenges research into Ocean Worlds presents to our current facilities and how they can be overcome. Lastly, this presentation will introduce the new ICEE (In-situ Carbon Evolution Experiments) facility at NASA Ames Research Center as an example of how a lab dedicated to Laboratory Astrophysics can adapt itself to also meet the needs for Ocean Worlds research.

Andrew Lige Mattioda↗

In-Space Manufacturing and Planetary Surface Construction: A "Make It, Don't Take It" Approach to Long Duration Human Exploration

This presentation will focus on technology development efforts at NASA Marshall Space Flight Center (MSFC) related to the long term sustainability of human spaceflight operations. NASA’s in-space manufacturing (ISM) project is developing approaches for on-demand manufacturing of metals, printed electronics, and recycling. These technologies will be demonstrated onboard the International Space Station (ISS) before transitioning to more logistically remote platforms such as Gateway or a foundational lunar surface habitat. Based on quantitative analyses, the operations and logistics approach used for ISS (which relies on storage of a large volume of spares and frequent cargo resupply), will not be transferrable to long duration, long endurance missions beyond low earth orbit. The deployment of manufacturing and recycling technologies on crewed platforms will enable on-demand manufacturing of spares at the point of use and conversion of nuisance materials to manufacturing feedstock, reducing both launch mass and waste material. This talk will also include information on NASA’s 3D Printed Habitat Centennial Challenge, which concluded in 2019 and served to advance the state of the art for large scale 3D printing with indigenous materials similar to those which would be available on a planetary surface. MSFC also recently began work on the Moon-to-Mars Planetary Autonomous Construction Technologies (MMPACT) project, which seeks to demonstrate capabilities for the creation of infrastructure on the lunar surface via construction of landing pads and habitats with lunar regolith based materials.

materials↗

Adaptation of Metal Additive Manufacturing Processes for the International Space Station

The In-Space Manufacturing (ISM) project at NASA Marshall Space Flight Center, in a partnership with the company, Made in Space, has previously investigated 3D printing of polymer materials on-orbit. In recent years, the project has begun exploring the potential for metal additive manufacturing (AM) on future space missions to reduce logistics and enable point-of-use manufacturing for sparing and repair. This presentation will provide an overview of constraints for demonstrating a manufacturing process on the International Space Station (ISS) as well as trades of available metal AM processes and their potential for in-space use. There are currently two processes in development as payloads for an ISS technology demonstration: wire+arc additive manufacturing (the Vulcan payload from Made in Space, Inc.) and bound metal deposition (the Fabrication Laboratory from Techshot, Inc). An update on both of these systems, results to date, and future development efforts will be presented. Relevant modeling work to evaluate operation of certain aspects of the processes in a microgravity environment will also be summarized.

manufacturing↗

Adaptation of Metal Additive Manufacturing Processes for the International Space Station

The In-Space Manufacturing (ISM) project at NASA Marshall Space Flight Center, in a partnership with the company, Made in Space, has previously investigated 3D printing of polymer materials on-orbit. In recent years, the project has begun exploring the potential for metal additive manufacturing (AM) on future space missions to reduce logistics and enable point-of-use manufacturing for sparing and repair. This paper provides an overview of constraints for demonstrating a manufacturing process on the International Space Station (ISS) as well as information on previous trades of available metal AM processes and their potential for in-space use. There are currently two processes in development as payloads for an ISS technology demonstration: wire+arc additive manufacturing (the Vulcan payload from Made in Space, Inc.) and bound metal additive manufacturing (the Fabrication Laboratory from Techshot, Inc). An update on both of these systems, key results to date, and future development efforts will be presented. Relevant modeling work, performed by NASA Ames Research Center, to evaluate operation of certain aspects of the bound metal AM process in a microgravity environment will also be summarized.

in-space manufacturing↗

A Multiwave Length Analysis of a Collection of Short-duration GRBs Observed between 2012 and 2015

We investigate the prompt emission and the afterglow properties of short-duration gamma-ray burst (sGRB) 130603B and another eight sGRB events during 2012–2015, observed by several multiwavelength facilities including the Gran Canarias Telescope 10.4 m telescope. Prompt emission high energy data of the events were obtained by INTEGRAL-SPI-ACS, Swift-BAT, and Fermi-GBM satellites. The prompt emission data by INTEGRAL in the energy range of 0.1–10 MeV for sGRB 130603B, sGRB 140606A, sGRB 140930B, sGRB 141212A, and sGRB 151228A do not show any signature of the extended emission or precursor activity and their spectral and temporal properties are similar to those seen in case of other short bursts. For sGRB 130603B, our new afterglow photometric data constrain the pre-jet-break temporal decay due to denser temporal coverage. For sGRB 130603B, the afterglow light curve, containing both our new and previously published photometric data is broadly consistent with the ISM afterglow model. Modeling of the host galaxies of sGRB 130603B and sGRB 141212A using the LePHARE software supports a scenario in which the environment of the burst is undergoing moderate star formation activity. From the inclusion of our late-time data for eight other sGRBs we are able to: place tight constraints on the non-detection of the afterglow, host galaxy, or any underlying ‘kilonova’ emission. Our late-time afterglow observations of the sGRB 170817A/GW170817 are also discussed and compared with the sub-set of sGRBs.

S B Pandey↗