Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INTERROGATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Enhanced backscatter and unsaturated blue wavelength shifts in F-doped fused silica optical fibers exposed to extreme neutron radiation damage

Amorphous fused silica (a-SiO 2 ) optical fibers, with and without inscribed Bragg gratings, were interrogated using infrared (~1550 nm) optical backscatter reflectometry during ~25 days of intense neutron irradiation to a fast (energy > 0.1 MeV) neutron fluence of ~10 21 n/cm 2 , or ~1.5 atomic displacements per atom. The reflected light amplitudes in Ge-doped core telecommunications fiber dropped below detection limits (>15 dB attenuation) within 3 days of irradiation (~10 20 fast n/cm 2 ). Here, amplitudes from a pure silica core, F-doped silica cladding fiber reached equilibrium levels ~1.5–2 dB higher than pre-irradiation values, whereas Bragg gratings inscribed in the same fiber using a femtosecond laser (point-by-point method) suffered > 45 dB attenuation. Blue wavelength shifts were initially consistent with previous radiation-induced compaction models but increased linearly with increasing neutron fluence (no evidence of saturation) beyond 10 20 n/cm 2 and exceeded 0.6%, which corresponds to >1,000 °C drift if used to measure temperature changes.

36 MATERIALS SCIENCE↗

Surface area and particle size distribution of plutonium oxides derived from the direct oxidation of Pu metal (LA-UR-18-22581)

The intent of this paper is to interrogate the physical characteristics of PuO 2 powders and aggregates produced by direct metal oxidation to examine possible relationships between process parameters and the physical characteristics of the product. The majority of the PuO 2 samples considered were generated during the pre-production and production phases of the Advanced Recovery and Integrated Extraction System (ARIES) program at Los Alamos National Laboratory (LANL). Oxide formed passively on Pu metal surfaces at ambient atmospheric conditions is also characterized. Plutonium oxide powders from the ARIES Direct Metal Oxidation (DMO) furnace and muffle furnace process lines are very consistent in terms of their bulk and tapped density, specific surface area (SSA) and particle size distribution (PSD). The SSAs of calcined PuO 2 generated in the ARIES DMO-2 and muffle furnaces are between 0.1 and 0.5 m2/g. Oxides from both the DMO-2 and muffle furnaces also had similar tri-modal PSDs with maxima at 0.73–3.16 μm, 10.9–18.5 μm, and 41.3–63.0 μm. The PSDs of the oxide formed passively on Pu metal surfaces at ambient conditions were unimodal, with near-Gaussian distributions and D50 close to 1 μm. In conclusion, the oxide formed passively at ambient conditions also had significantly higher SSAs (6–8 m 2 /g).

36 MATERIALS SCIENCE↗

Segregation behavior and phase instability of Eurofer97 after neutron irradiation to 72 dpa

Here, a reduced activation ferritic/martensitic steel, Eurofer97, was neutron irradiated in the vicinity of 300 °C in the High Flux Isotope Reactor (HFIR) up to 72 dpa. Advanced analytical scanning transmission electron microscopy and conventional transmission electron microscopy were applied to investigate the radiation-induced segregation and phase instability behavior after neutron irradiation. Amorphization was observed in M 23 C 6 carbides. Cr-rich clusters were seen within the matrix, near the lath boundaries and close to the M 23 C 6 carbides. Cr enrichment and Fe depletion were detected at both prior austenite grain boundaries and lath boundaries, despite different segregation magnitude. In addition, the enrichment of Ni, the depletion of V, and tiny cavities (presumably helium bubbles) are also found at lath boundaries. This work interrogates the evolution of microstructures after neutron irradiation, which provides detailed understanding on the microstructural aspects controlling the mechanical integrity of Eurofer97 under high-dose neutron damage.

36 MATERIALS SCIENCE↗

N-heterocyclic carbene platinum-butadiyne Click/iClick complexes. Towards blue-violet phosphorescence

By employing two different methods, namely, Click and iClick, a series of four trans-NHC-Pt(II) triazole-acetylide complexes containing benzyl (3a), methylnaphthalene (3b), methylanthracene (3c), and phenyl (3d) substituents at the terminal triazole ring were synthesized and characterized. The traditional click approach involves first synthesizing a triazole-acetylene and then attaching to the Pt ion. In the iClick approach, the triazole is formed via cycloaddition by combining a trans-platinum butadiyne with the corresponding organic azide. The complexes were interrogated to determine the effects of conjugation and ligand substituent on their photophysical properties. Complex 3a exhibits a photoluminescence lifetime of 4.3 μs at 77 K. Ascribed to emission from conformers differing due to the torsion of the aryl acetylide ligands, employing different excitation wavelengths results in different emission spectra. Complex 3a emits in the violet region with CIE coordinates of (0.159, 0.021) under 290 nm excitation and shifts to CIE coordinates of (0.161, 0.019) under 320 nm excitation. Finally, complex 3d, having a photoluminescence lifetime of 13.1 μs at room temperature, emits in the sky-blue region with CIE coordinates of (0.237, 0.355).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Flow simulation and analysis of high-power flow batteries

The cost of a flow battery system can be reduced by increasing its power density and thereby reducing its stack area. If per-pass utilizations are held constant, higher battery power densities can only be achieved using higher flow rates. Here, a 3D computational fluid dynamics model of a flow battery flow field and electrode is used to analyze the implications of increasing flow rates to high power density operating conditions. Interdigitated and serpentine designs, and cell sizes ranging from 10 cm 2 to 400 cm 2 , are simulated. The results quantify the dependence of pressure loss on cell size and design, demonstrating that the details of the passages that distribute flow between individual channels and the inlet and outlet have a major impact on pressure losses in larger cells. Additionally, in-cell flow behavior is analyzed as a function of cell size and design. Flow structures are interrogated to show how and where electrode parameters influence pressure drops, and how regions where transport is slow are correlated with the presence of experimentally observed cell degradation.

25 ENERGY STORAGE↗

New insights into the application of the valence rules in Zintl phases—Crystal and electronic structures of Ba{sub 7}Ga{sub 4}P{sub 9}, Ba{sub 7}Ga{sub 4}As{sub 9}, Ba{sub 7}Al{sub 4}Sb{sub 9}, Ba{sub 6}CaAl{sub 4}Sb{sub 9}, and Ba{sub 6}CaGa{sub 4}Sb{sub 9}

Crystals of three new ternary pnictides—Ba{sub 7}Al{sub 4}Sb{sub 9}, Ba{sub 7}Ga{sub 4}P{sub 9}, and Ba{sub 7}Ga{sub 4}As{sub 9} have been prepared by reactions of the respective elements in molten Al or Pb fluxes. Single-crystal X-ray diffraction studies reveal that the three phases are isotypic, crystallizing in the orthorhombic Ba{sub 7}Ga{sub 4}Sb{sub 9}-type structure (space group Pmmn, Pearson symbol oP40, Z=2), for which only the prototype is known. The structure is based on TrPn{sub 4} tetrahedra (Tr=Al, Ga; Pn=P, As, Sb), connected in an intricate scheme into 1D-ribbons. Long interchain Pn–Pn bonds (d{sub P–P}>3.0 Å; d{sub As–As}>3.1 Å; d{sub Sb–Sb}>3.3 Å) account for the realization of 2D-layers, separated by Ba{sup 2+} cations. Applying the classic valance rules to rationalize the bonding apparently fails, and Ba{sub 7}Ga{sub 4}Sb{sub 9} has long been known as a metallic Zintl phase. Earlier theoretical calculations, both empirical and ab-initio, suggest that the possible metallic properties originate from filled anti-bonding Pn–Pn states, and the special roles of the “cations” in this crystal structure. To experimentally probe this hypothesis, we sought to synthesize the ordered quaternary phases Ba{sub 6}CaTr{sub 4}Sb{sub 9} (Tr=Al, Ga). Single-crystal X-ray diffraction work confirms Ba{sub 6.145(3)}Ca{sub 0.855}Al{sub 4}Sb{sub 9} and Ba{sub 6.235(3)}Ca{sub 0.765}Ga{sub 4}Sb{sub 9}, with Ca atoms preferably substituting Ba on one of the three available sites. The nuances of the five crystal structures are discussed, and the chemical bonding in Ba{sub 7}Ga{sub 4}As{sub 9} is interrogated by tight-binding linear muffin-tin orbital calculations. - Graphical abstract: The new Zintl phases—Ba{sub 7}Al{sub 4}Sb{sub 9}, Ba{sub 7}Ga{sub 4}P{sub 9}, and Ba{sub 7}Ga{sub 4}As{sub 9}, and their quaternary variants Ba{sub 6}CaTr{sub 4}Sb{sub 9} (Tr=Al, Ga)—crystallize in the Ba{sub 7}Ga{sub 4}Sb{sub 9} structure type. The structures are based on TrPn{sub 4} tetrahedra (a perspective of the crystal structure is shown, as viewed along the c axis). - Highlights: • Ba{sub 7}Al{sub 4}Sb{sub 9}, Ba{sub 7}Ga{sub 4}P{sub 9}, and Ba{sub 7}Ga{sub 4}As{sub 9} are new compounds in the respective phase diagrams. • The quaternary phases Ba{sub 6}CaTr{sub 4}Sb{sub 9} (Tr=Al, Ga) show nearly ordered Ba/Ca distribution. • Very weak Pn–Pn bonds and pairing distortion are observed for Ba{sub 7}Ga{sub 4}Pn{sub 9} (Pn=P, As).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enabling high resolution strain mapping in zirconium alloys

Highlights: • Optimisation of speckle patterns suitable for high resolution digital image correlation in a zirconium alloy • Evidence of distinct strain patterning at the macro and micro scale • Analysis of strain heterogeneity in a neighbouring low and high strain band • Paved the way for future studies on strain localization in zirconium alloys subjected to hydriding and irradiation damage - Abstract: High Resolution Digital Image Correlation (HRDIC) has been established recently as a novel displacement mapping technique during mechanical loading experiments to quantify strain localisation down to the level of individual slip traces. This is achieved by the creation of a nano-scale gold pattern naturally formed during remodelling of a thin gold layer that was sputtered onto the region of interest. To date, the gold remodelling is carried out in a water vapourisation environment, which excludes the technique to be applied to materials that readily form noticeable oxide layers in such environments. The current paper describes a recently developed gold remodelling technique using a styrene-argon environment at substantially lower temperatures than the water-vapour based technique. The material used in the present work is a zirconium alloy where we first demonstrate the problem of oxide formation during remodelling in water vapour and the benefit of the modified remodelling procedure. The error associated with the spatial drift was assessed for different interrogation window sizes followed by detailed analysis of the subsequent strain maps produced using the styrene remodelled patterns after tensile deformation to nominal applied strains of ~3.5% and ~7.0%. The level of detail captured demonstrate the suitability of styrene-argon-based remodelling for materials like Zr alloys with the strain maps showing clear strain patterning on both a transgranular and single grain scale with the possibility of quantifying strain across a single slip trace.

36 MATERIALS SCIENCE↗

GMFOLD: Subgraph matching for high-throughput DNA-aptamer secondary structure classification and machine learning interpretability

Aptamers are oligonucleotide receptors that bind to their targets with high affinity. Here, we consider aptamers comprised of single-stranded DNA that undergo target-binding-induced conformational changes, giving rise to unique secondary and tertiary structures. Given a specific aptamer primary sequence, there are well-established computational tools (notably mfold) to predict the secondary structure via free energy minimization algorithms. While mfold generates secondary structures for individual sequences, there is a need for a high-throughput process whereby thousands of DNA structures can be predicted in real-time for use in an interactive setting, when combined with aptamer selections that generate candidate pools that are too large to be experimentally interrogated. We developed a new Python code for high-throughput aptamer secondary structure determination (GMfold). GMfold uses subgraph matching methods to group aptamer candidates by secondary structure similarities. We also improve an open-source code, SeqFold, to incorporate subgraph matching concepts. We represent each secondary structure as a lowest-energy bipartite subgraph matching of the DNA graph to itself. These new tools enable thousands of DNA sequences to be compared based on their secondary structures, using machine-learning algorithms. This process is advantageous when analyzing sequences that arise from aptamer selections via systematic evolution of ligands by exponential enrichment (SELEX). This work is a building block for future machine-learning-informed DNA-aptamer selection processes to identify aptamers with improved target affinity and selectivity and advance aptamer biosensors and therapeutics.

Aptamer↗

Atomic scale understanding of organic anion separations using ion-exchange resins

A combination of ab initio and classical molecular dynamic simulations was used to explore the adsorption/desorption and diffusion characteristics of ion-exchange resins for extraction of organic anions in electrically-driven separation processes. We considered two classes of carboxylate mixtures that are commonly encountered in bioprocessing separations: a short chain fatty acid mixture (acetate/butyrate) and an aromatic mixture (ferulate/coumarate). The suitability of several resin materials including PFC100E, IRC86, PFA444 and IRA67 was interrogated. The decomposition of the interaction energies by the symmetry-adapted perturbation theory and the classical molecular dynamic simulations of organic diffusion together reveal that the geometries of the organic anions and the functional groups of the resins, as well as their Columbic interactions, are the controlling factors in the diffusion process of the organic compounds in these resins. Additionally, classical simulations also show that modifying the functionality of resin beads, the magnitude of electric fields, and the ratio of organic mixtures may provide an effective way to control the diffusion rate and obtain selective separation of these organic mixtures. Finally, a general suggestion for favorable separation conditions is summarized.

36 MATERIALS SCIENCE↗

Microbial metaproteomics: Identifying the repertoire of proteins that microorganisms use to compete and cooperate in complex environmental communities

The availability of genome information for microbial consortia, including unculturable species, from environmental samples has enabled systems-biology interrogation by providing a means to access genomic, transcriptomic, and proteomic information. This provides a unique opportunity to characterize the molecular activities and interactions of these microbial systems at a comprehensive level never before possible. Such information not only provides details about the organizational, functional, and metabolic activities of such systems, but also the untapped reserve of molecular activities that might be invoked and exploited under certain environmental conditions. Since bacteria naturally exist in complex ecosystems, it is imperative to develop and utilize analytical approaches that can provide molecular level details on systems consisting of mixed microbial membership. This is the realm of metaproteomics - the characterization of the complement of proteins expressed by a microbial community in an environmental sample

59 BASIC BIOLOGICAL SCIENCES↗

Uncultivated thermophiles: current status and spotlight on ‘Aigarchaeota’

Meta-analysis of cultivation-independent sequence data shows that geothermal systems host an abundance of novel organisms, representing a vast unexplored phylogenetic and functional diversity among yet-uncultivated thermophiles. There are a number of thermophiles that were recently interrogated using metagenomic and/or single-cell genomic approaches, including members of taxonomic groups that inhabit both thermal and non-thermal environments, such as 'Acetothermia' (OP1) and 'Atribacteria' (OP9/JS1), as well as the exclusively thermophilic lineages 'Korarchaeota', 'Calescamantes' (EM19), 'Fervidibacteria' (OctSpA1-106), and 'Aigarchaeota' (HWCG-I). The 'Aigarchaeota', a sister lineage to the Thaumarchaeota, likely includes both hyperthermophiles and moderate thermophiles. Furthermore, they inhabit terrestrial, marine, and subsurface thermal environments and comprise at least nine genus-level lineages, several of which are globally distributed.

59 BASIC BIOLOGICAL SCIENCES↗

Evolutionary relationships among shell proteins of carboxysomes and metabolosomes

Bacterial microcompartments (BMCs) are self-assembling prokaryotic organelles which encapsulate enzymes within a polyhedral protein shell. Additionally, the shells are comprised of only two structural modules, distinct domains that form pentagonal and hexagonal building blocks, which occupy the vertices and facets, respectively. As all BMC loci encode at least one hexamer-forming and one pentamer-forming protein, the evolutionary history of BMCs can be interrogated from the perspective of their shells. Here, we discuss how structures of intact shells and detailed phylogenies of their building blocks from a recent phylogenomic survey distinguish families of these domains and reveal clade-specific structural features. These features suggest distinct functional roles that recur across diverse BMCs. For example, it is clear that carboxysomes independently arose twice from metabolosomes, yet the principles of shell assembly are remarkably conserved.

59 BASIC BIOLOGICAL SCIENCES↗

Biaxial deformation in high purity aluminum

The convergence of multiple characterization tools has been applied to investigate the relationship of microstructure on damage evolution in high purity aluminum. The extremely coarse grain size of the disc-shaped sample provided a quasi-two dimensional structure from which the location of surface-measured features could be inferred. In particular, the role of pre-existing defects on damage growth was accessible due to the presence of casting porosity in the aluminum. Micro tomography, electron backscatter diffraction, and digital image correlation were applied to interrogate the sample in three dimensions. Recently micro-bulge testing apparatus was used to deform the pre-characterized disc of aluminum in biaxial tension, and related analysis techniques were applied to map local strain fields. Subsequent post-mortem characterization of the failed sample was performed to correlate structure to damaged regions. We determined that strain localization and associated damage was most strongly correlated with grain boundary intersections and plastic anisotropy gradients between grains. Pre-existing voids played less of an apparent role than was perhaps initially expected. Finally, these combined techniques provide insight to the mechanism of damage initiation, propagation, and failure, along with a test bed for predictive damage models incorporating anisotropic microstructural effects.

36 MATERIALS SCIENCE↗

High-throughput experimentation for microstructural design in additively manufactured 316L stainless steel

In the present study, a combination of high-throughput (HT) and low-throughput (LT) techniques was used to rapidly determine the processing window and generate processing maps for Selective Laser Melting (SLM) of 316L stainless steel. The HT method includes the fabrication of hundreds of hex nut-shaped specimens, each processed with a unique combination of laser power, scanning speed, and hatch spacing. An easily removable scaffolding permitted rapid sample extraction from the base plate, thus saving machining cost and time. Hardness and immersion density measurements were used for HT characterization to identify a processing window for maximum strength and density. Within the defined processing window, a low-throughput (LT) microstructural interrogation of specimens were performed. The microstructural analysis included quantification at various length scales (i.e., grains size and morphology, texture, primary dendrite arm spacing, and melt pool geometry analysis). Microstructure-based processing maps as a function of volumetric energy density were generated. The combination of HT and LT methods produced a predictive relationship between hardness and primary dendrite arm spacing using a Hall-Petch relationship. A model is proposed to explain the dependence of microstructure on the melt pool geometry. Here, the HT method can be applied for the microstructural design of SLM-fabricated components in other alloys.

316L stainless steel↗

Conceptual design study of neutron detectors for safeguards measurement of an irradiated pebble

Nuclear material control and accounting (MC&A) of pebble-bed reactors (PBRs) is challenging because a PBR utilizes hundreds of thousands of identical, unmarked pebbles that are continuously recirculated through the core. To develop tools that enable the implementation of international safeguards, especially in the context of MC&A of spent pebbles, we designed and simulated three neutron detection concepts to determine fissile content in individual pebbles: a differential die-away (DDA) detector, a californium interrogation prompt neutron (CIPN) detector, and a passive neutron albedo reactivity (PNAR) detector using Monte Carlo calculations. Burnup calculations were performed on the spent pebbles from the PBMR-400 classic PBR. The varying neutron and gamma source terms, and isotopic compositions in the spent pebbles calculated at various burnup levels were used in the neutron detector models. DDA was found to be sensitive to the number of passes a pebble has had through the core and to the fissile content contained in a spent pebble. Optimization in the DDA design further increased the neutron count rates and thus reduced counting uncertainty. Meanwhile, passive neutron counting using the same detector body could distinguish pebbles with different numbers of passes, but its response was dominated by neutron-emitting actinides and was not sensitive to fissile content. On the other hand, the PNAR technique was not viable for a single pebble but performed reasonably for a 27-pebble array, which suggested potential use for verification measurements of containers filled with 27 or more spent pebbles.

CIPN↗

Enhancers that direct gene expression to central nervous system vascular endothelial cells in vivo

CNS vascular endothelial cells (ECs) exhibit a distinctive gene expression program that is foundational for the blood-brain barrier (BBB). Previous research identified candidate cis-regulatory elements (CREs) that were hypothesized to control this program. In this work, transgenic mice and recombinant adeno-associated virus (rAAV) vectors have been used to interrogate these candidate CREs in vivo. These experiments show that an 850 bp genomic DNA segment ∼60 kb 5′ of Slc2a1 possesses enhancer activity that is (1) specific for BBB+ CNS ECs and (2) both necessary and sufficient for BBB+ EC gene expression. A screen of >8,000 genomic DNA segments from CNS EC-specific CRE candidates reveals several hundred with enhancer activity. Transcription factors ERG and LEF1 are shown to occupy sites in brain ECs that are highly enriched in candidate and experimentally validated CREs, lending strong support to a model in which canonical Wnt signaling activates the BBB program via LEF1.

CUT&RUN↗

Experimental verification of a method to create a variable energy neutron beam from a monoenergetic, isotropic source using neutron elastic scatter and time of flight

An experiment was performed to determine the neutron energy of near-monoergetic deuterium–deu-terium (D–D) neutrons that elastically scatter in a hydrogenous target. The experiment used two liquid scintillators to perform time of flight (TOF) measurements to determine neutron energy, with the start detector also serving as the scatter target. The stop detector was placed 1.0 m away and at scatter angles of π/6, π/4, and π/3 rad, and 1.5 m at a scatter angle of π/4 rad. When discrete 1 ns increments were implemented, the TOF peaks had estimated errors between 21.2 and 3.6% relative to their expected locations. Full widths at half-maximum (FWHM) ranged between 9.6 and 20.9 ns, or approximately 0.56–0.66 MeV. Monte Carlo simulations were also conducted that approximated the experimental setup and had both D–D and deuterium–tritium (DT) neutrons. The simulated results had errors between -17.2 and 0.0% relative to their expected TOF peaks when 1 ns increments were applied. The largest D–D and D–T FWHMs were 26.7 and 13.7 ns, or approximately 0.85 and 4.98 MeV, respectively. These values, however, can be reduced through manipulation of the dimensions of the system components. Lastly, the results encourage further study of the neutron elastic scatter TOF system with particular interest in application to active neutron interrogation to search for conventional explosives.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Improved lithium iodide neutron scintillator with Eu 2+ activation: The elimination of Suzuki-Phase precipitates

Monovalent alkali halides such as NaI, CsI, and LiI are widely used as inorganic scintillators for radiation detection due to their light yield, the capability for the growth of large single crystals, relatively low cost, and other favorable characteristics. These materials are frequently activated through the addition of small amounts (e.g., a few hundred ppm) of elements such as thallium - or sodium in the case of CsI. The monovalent alkali halide scintillators can also be activated with low concentrations of Eu 2+ , however Eu activation has previously not been widely employed due to the non-uniform segregation of the divalent Eu dopant that leads to the formation of unwanted phases during Bridgman or other solidification crystal-growth methods. Specifically, for Eu concentrations near and above ~0.5%, Suzuki Phase precipitates form in the course of the melt-growth process, and these Suzuki Phase particles scatter the scintillation light. This adversely affects the scintillator performance via reduction in the optical transmission of the material, and depending on the crystal thickness and precipitated-particle concentration, this reduction can occur up to the point of opacity. Here we describe a post-growth process for the removal of Suzuki Phase precipitates from single crystals of the neutron scintillator LiI activated with Eu 2+ at concentrations up to and in excess of 3 wt.%, and we correlate the resulting neutron-detection performance with the thermal processing methods used to remove the Suzuki Phase particles. Furthermore, the resulting improved scintillator properties using increased Eu activator levels are applicable to neutron imaging and active interrogation systems, and pulse-height gamma-ray spectroscopy rather than pulse-shape discrimination can be used to discriminate between gamma ray and neutron interaction events.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗