Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Hydride”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

Degradation behavior at elevated temperature of LaNisub5-xSnsubxHsubz for x between 0.20 and 0.25

Systematic studies of the hydriding behavior of LaNi(sub 5-x)Sn(sub x)H(sub z) alloys with tin contents in the range between 0.20 and 0.25 have revealed changes in the pressure-composition-temperature (PCT) isotherms measured after heating the hydrides above 450 K. These changes are indications of degradation processes and increased disorder within the alloy structure.

metal hydrides gas gap heat switches hydrogen stor↗
NASA NTRS2000

Degradation study of the ZrNiH(sub 1.5) system

The ZrNi hydride has been assessed as reversible hydrogen storage material in actuators of gas gap heat switches for applications involving hydride compressors in closed-cycle Joule-Thomson sorption cryocoolers.

metal hydrides gas gap heat switches hydrogen stor↗
NASA NTRS2004

In situ x-ray and neutron powder diffraction study of LaNi5-xSnx-H systems

This paper will present results of in situ XRD measurements of LaNi4.75Sn0.25 .during the initial absorption-desorption cycle, These measurements were performed under a similar condition to that for LaNi4.75Al0.25 previously reported [1]. The data were analyzed by the Rietveld method. Lattice parameter change and strain formation accompanying hydride phase formation and decomposition will be discussed. In addition, results of in situ neutron diffraction of LaNi4.78Sn0.22, focusing on hydrogen occupation in the hydride phase, will be presented.

metal hydrides↗
DOE OSTI2022

Preliminary Observations on the Hydrogen Redistribution Feedback in YH-Moderated Monolithic Microreactors.

Nuclear microreactors promise to open new markets for nuclear industry. This is due to their potential competitive cost in non-traditional market segments, e.g., mines, forward military basis, extraterrestrial surfaces and remote areas, and inherently safe characteristics that make them deployable where other power sources are not available or difficult to exploit. Transition metal dihydrides have been considered among the most promising candidates for moderating nuclear microreactors. In particular, yttrium hydride (YH\textsubscript{x}) has been selected for high temperature applications due to its high thermal stability and relatively high hydrogen retention at temperatures exceeding $870^\circ C$. One of the main issues associated with the use of hydrides is that, when exposed to temperature, stress, or concentration gradients, the hydrogen contained in the metallic matrix tends to redistribute and leak from the moderating elements, potentially leading to reactivity losses and power swings. The purpose of this paper is to gain a better physical understanding of the neutronic feedback associated with the hydrogen redistribution in YH\textsubscript{x}, by using Griffin and Bison. This feedback is inherently multiphysics, since the hydrogen distribution is strongly dependent on the moderator temperature spatial distribution. In particular, we want to understand the sign (+/-) of the neutronic feedback, its order of magnitude, and its underlying physical causes.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Selected results from full-core hydrogen redistribution asymptotic analysis in YH-moderated heat-pipe cooled microreactor

Yttrium hydride is the main candidate for moderation of high temperature nuclear microreactors . This is due to its high thermal stability and relatively high hydrogen retention at temperatures exceeding 870 C. One of the main issues associated with the use of yttrium hydride is that, when exposed to temperature, stress, or concentration gradients, the hydrogen contained in the metallic matrix tends to redistribute and leak from the moderating elements, potentially leading to reactivity losses and power swings. This paper is focused on presenting selected results from the asymptotic hydrogen redistribution analysis performed on the Simplified Microreactor Benchmark Assessment (SiMBA) problem, a microreactor core conceptual design developed at INL. The analysis is based on full core analysis, relies uniquely on Bison to perform hydrogen redistribution calculations, and discusses the physical causes of the reactivity feedback. It was found that the feedback is negative, but it is one order of magnitude lower than the one found for the empire reactor unit-cell. This is due to the lower axial temperature gradient together with the effect of the reflector.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Carbonic Anhydrase Variants Catalyze the Reduction of Dialkyl Ketones with High Enantioselectivity

Abstract Human carbonic anhydrase II (hCAII) naturally catalyzes the reaction between two achiral molecules—water and carbon dioxide—to yield the achiral product carbonic acid through a zinc hydroxide intermediate. We have previously shown that a zinc hydride, instead of a hydroxide, can be generated in this enzyme to create a catalyst for the reduction of aryl ketones. Dialkyl ketones are more challenging to reduce, and the enantioselective reduction of dialkyl ketones with two alkyl groups that are similar in size and electronic properties, is a particularly challenging transformation to achieve with high activity and selectivity. Here, we show that hCAII, as well as a double mutant of it, catalyzes the enantioselective reduction of dialkyl ketones with high yields and enantioselectivities, even when the two alkyl groups are similar in size. We also show that variants of hCAII catalyze the site‐selective reduction of one ketone over the other in an unsymmetrical aliphatic diketone. Computational docking of a dialkyl ketone to variants of hCAII containing the zinc hydride provides insights into the origins of the reactivity of various substrates and the high enantioselectivity of the transformations and show how a confined environment can control the enantioselectivity of an abiological intermediate.

Chen, Reichi↗
DOE OSTI2021

Economizing on Precious Metals in Three-Way Catalysts: Thermally Stable and Highly Active Single-Atom Rhodium on Cera for NO Abatement under Dry and Industrially Relevant Conditions

We show for the first time that atomically dispersed Rh cations on ceria, prepared via high-temperature atom trapping synthesis, are the active species for (CO+NO) reaction. This provides a direct link with the organometallic homogeneous Rh(I) complexes capable of catalyzing dry (CO+NO) reaction but without the stability concern. In particular, thermally stable Rh cations in 0.1wt% Rh1/CeO2 achieve full NO conversion with a TOF of ~ 330 hr-1 per Rh atom at 120 °C. Under dry conditions, the main product above 100 °C is N2 with N2O being the minor product. The presence of water promotes low-temperature activity of 0.1wt% Rh1/CeO2 starting at 50 °C with full NO conversion at ~120 °C. In the case with the wet stream, however, ammonia and nitrogen are the main products with only minor N2O amounts. NH3 formation at such low temperatures is attractive because of the potential to use this as a passive SCR system. Because of the uniformity of Rh ions on the support, we are able to observe the intermediates of (CO+NO) reaction via infrared measurements on Rh cations on zeolite and ceria. Furthermore, we show that ammonia formation correlates with the WGS activity of the material and thus, rhodium hydride Rh-H species are involved in this reaction: we detect Rh(CO)Hx species on ceria using isotopic IR measurements. These findings provide new mechanistic understanding for the catalytically active species in TWC catalysis and open up a new avenue for the synthesis of novel emissions control catalysts with 100% atom economy of ultra-expensive precious metals such as Rh.

Khivantsev, Konstantin↗
DOE OSTI2021

Hydrogen Evolution Mediated by Cobalt Diimine‐Dioxime Complexes: Insights into the Role of the Ligand Acid/Base Functionalities.

Abstract The benchmarking of the performance for H 2 evolution of cobalt diimine‐dioxime catalysts is provided based on a comprehensive study of their catalytic mechanism. The latter follows an ECE'CC pathway with intermediate formation of a Co(II)‐hydride intermediate and second protonation possibly at a basic site of the ligand, acting as a proton relay. This suggests an intramolecular coupling between the hydride and protonated ligand as the proton concentration‐independent rate‐determining step controlling the turnover frequency for H 2 evolution.

Sun, Dongyue↗
DOE OSTI2021

Benchmarking Quantum Chemistry Computations with Variational, Imaginary Time Evolution, and Krylov Space Solver Algorithms

Quantum chemistry is a key application area for noisy-intermediate scale quantum (NISQ) devices, and therefore serves as an important benchmark for current and future quantum computer performance. Previous benchmarks in this field have focused on variational methods for computing ground and excited states of various molecules, including a benchmarking suite focused on the performance of computing ground states for alkali-hydrides under an array of error mitigation methods. State-of-the-art methods to reach chemical accuracy in hybrid quantum-classical electronic structure calculations of alkali hydride molecules on NISQ devices from IBM are outlined here. Here it is demonstrated how to extend the reach of variational eigensolvers with symmetry preserving Ansätze. Next, it is outlined how to use quantum imaginary time evolution and Lanczos as a complementary method to variational techniques, highlighting the advantages of each approach. Finally, a new error mitigation method is demonstrated which uses systematic error cancellation via hidden inverse gate constructions, improving the performance of typical variational algorithms. These results show that electronic structure calculations have advanced rapidly, to routine chemical accuracy for simple molecules, from their inception on quantum computers a few short years ago, and they point to further rapid progress to larger molecules as the power of NISQ devices grows.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Bridging Experiment and Theory to Reveal Compounds in K–Zn(Cd)–Bi Systems

This study investigates the facile hydride synthesis method guided by theoretical predictions to explore the K–T–Bi (T = Zn, Cd) phase spaces. Using an adaptive genetic algorithm (AGA) and density functional theory (DFT), candidate compositions are identified for experimental validation via a facile hydrides route, permitting experimental screening of K–Zn–Bi and “empty” K–Cd–Bi systems. The previously reported KZnBi and KZn 2 Bi 2 are synthesized alongside newly discovered KCdBi and KCd 2 Bi 2 . While the AGA and DFT predict the stability of these compounds, structural predictions align with the experiment only for KZnBi and KZn 2 Bi 2 . Single-crystal X-ray structure refinements confirm that KZnBi and KZn 2 Bi 2 adopt the hexagonal ZrBeSi- and tetragonal ThCr 2 Si 2 -structure types, respectively. KCdBi has tetragonal PbClF-structure type and KCd 2 Bi 2 belongs to the ThCr 2 Si 2 -structure type. A trend based on the ratio of the metal ionic radii allows to rationalize variation in the structure types within the ATBi family (A = Li–Cs), correctly identifying KCdBi as isostructural to NaZnBi. Thermal stability studied by high-temperature powder X-ray diffraction reveals that Zn-containing compounds melt at higher temperatures (821 K for KZn 2 Bi 2 ) than Cd-containing KCd 2 Bi 2 (635 K). This study highlights the efficacy of combining rapid synthesis techniques with predictive modeling, though structural predictions show some limitations in accuracy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Olefin methylation over iron zeolites and the methanol to hydrocarbons reaction

The effect of olefin addition to a stream of dimethyl ether on the methanol homologation reaction is investigated using iron-substituted zeolites Fe-beta and Fe-ZSM-5. The reaction was investigated using plug-flow microreactors in the temperature range of 240–400 °C, at a total pressure of 0.239 MPa and a WHSV of 6.12 (g DME/ gcat -hr). For Fe-beta (Si/Fe= 9.2) catalysts, isobutene co-feeding almost doubles dimethyl ether (DME) consumption rate and shifts selectivity towards larger olefins with carbon numbers from 5 to 7. Addition of isobutene above 6.3%, however, resulted in a reduction of DME consumption rates, an effect assigned to the replacement of surface methoxy groups for adsorbed olefins in the zeolite pores. Below a temperature of 340 °C hydride-transfer rates are negligible; reaction rates are stable for over 5.5 h and the products consist almost exclusively of olefins and a small amount of methane. Above 360 °C the onset of catalytic hydride transfer processes is observed leading to fast catalyst deactivation rates and an increase in the concentration of aromatic species. Iron ZSM-5 (Si/Fe = 21.4) catalysts under similar reaction conditions consumes methanol faster than Fe-beta at approximately three times the TOF (on a per iron basis). The Fe-ZSM-5 catalyst was selective to a distribution of products (C5 to C8) as compared to Fe-beta which was selective to primarily C5 and C7. Co-feeding larger olefins (2-methyl-2-butene, 2,3-dimethyl-2-butene, 2,3,3-trimethyl-1-butene, and 2,4,4-trimethyl-2-pentene) at a 3.9% olefin concentration over Fe-beta changed selectivity towards cracking products (C4 compounds such as isobutene). As the size of the olefin increases, a reduction of DME consumption rate is also observed. Here these results show that co-feeding olefins with DME over Fe-zeolites is a promising route to increase methylation rates at relatively low temperatures producing larger branched olefins and that the product distribution is highly dependent on the zeolite pore size and structure of the olefin.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A new perspective on the initial hydrogenation of $\mathrm{TiFe_{0.9}M_{0.1}}$ ($\mathrm{M = V, Cr, Fe, Co, Ni}$) gained from surface oxide analysis and nucleation thermodynamics

Despite the promise of TiFe-based alloys as low-cost solid-state hydrogen storage materials with mild operating conditions and reasonable hydrogen capacity, their initial hydrogenation process is difficult, hindering broad utilization. The effect of alloying element on the initial hydrogenation kinetics of TiFe alloys, TiFe 0.9 M 0.1 (M = V, Cr, Fe, Co and Ni), was evaluated by analyzing changes to the passivating surface oxide layer that inhibits hydrogen permeation, as well as the ease of initial-stage hydrogen absorption into the underlying matrix. X-ray photoelectron spectroscopy and atom probe tomography revealed key variations in surface oxide compositions and thinning of the passivating oxide layer compared to pure TiFe, which suggests suppressed oxide growth by alloying-induced elemental redistribution. At the same time, density functional theory calculations predicted exothermic formation of hydride nuclei when alloying with V or Cr, as well as a reduced nucleation barrier when alloying with Co or Ni. Overall, these results are consistent with the observed experimental trend of the activation kinetics. We propose that improvements in activation kinetics of TiFe with alloying arises from the combined effect of reduced passivating oxide thickness and easier hydride nucleation, offering a starting point for alloy design strategies towards further improvement.

25 ENERGY STORAGE↗
DOE OSTI2021

CO 2 electro-reduction on Cu 3 P: Role of Cu(I) oxidation state and surface facet structure in C 1 -formate production and H 2 selectivity

We report the catalytic activity and mechanism of copper(I) phosphide, Cu 3 P, with predominant [00Ι] facet exposure for the electrochemical reduction of CO 2 (CO 2 RR) to formic acid. Crystalline nanosheets of this compound that show a preferential [00Ι] facet orientation exhibit undiminished CO 2 RR activity after 16 hours with full retention of crystal structure and surface chemical speciation and no detectable corrosion. In contrast to the range of products formed on Cu metal, CuO, and Cu 2 O, the CO 2 RR on Cu 3 P [00Ι] produces mainly hydrogen and formate as the sole carbon product in KHCO 3 electrolyte. Analysis of the Cu 3 P [00Ι] facet by HAADF-STEM was used to determine the surface lattice structure, while both XPS and Auger spectroscopies were used to determine the surface chemical speciation from the kinetic energies of ionized electrons. The presented analysis identifies isolated trigonal CuP 3 sites on the Cu 3 P[00Ι]-Cu 3 P 3 terminated surface and the Cu(I) oxidation state as precursor to the active catalyst. The CO 2 RR selectivity to formate and the higher turnover rate for H 2 production on the [00Ι] facet allows a structure-activity analysis and chemical mechanism to be proposed. Formation of a surface hydride at isolated *H-CuP 3 sites is proposed as the catalytic site in forming both H 2 and formate, while the long Cu—Cu separation retards forming C-C coupling products. In conclusion, these results disprove previously published claims of Cu(I) oxidation state as a sufficient criterion to promote CO 2 RR to C 2+ products, show that stronger bonded hydrides, *H-CuP 3 on Cu 3 P, favor production of the C1 product formate over all other carbon products, and predict that stronger formate binding (bidentate) is needed for CO 2 RR currents to compete with H 2 production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Neutron irradiation of tungsten in hydrogen environment at HFIR

Neutron irradiation of tungsten with and without the presence of hydrogen is needed to understand the influence of hydrogen on microstructure development under fusion reactor conditions. However, there is a risk of ignition if air ingress occurs during seal welding of irradiation capsules in a pressurized hydrogen environment. Therefore, an irradiation capsule was designed that contains several disks of vanadium hydrides at a 30% hydrogen-to-metal atomic ratio. During irradiation, the hydrogen is released from the hydrides as the capsule temperature increases, so the irradiation capsule environment is mostly hydrogen when the capsule reaches its 400 °C design temperature. In this study, we describe the design and operating characteristics of this first-of-a-kind irradiation capsule.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

IImprove hydrogen sorption kinetics of MgH2 by doping carbon-encapsulated iron-nickel nanoparticles

Magnesium hydride (MgH2) with excellent hydrogen storage kinetics is important for the wide application of hydrogen energy. Herein, to accelerate the sorption kinetics of MgH2 and lower its dehydrogenation temperature, we design and prepare a carbon film coated dual transition metal alloy, the Fe0.64Ni0.36@C composite with a coreshell structure, and employ it as an additive to synthesize MgH2–Fe0.64Ni0.36@C system by ball-milling and hydriding combustion method. In contrast to pure MgH2, the initial hydrogen release temperature of the MgH2–Fe0.64Ni0.36@C composite lowers to 250°C from 480°C and the composite can absorb 5.18 wt% H2 within 20 min (150°C, 3 MPa H2). More importantly, the apparent activation energy of the dehydrogenation for decomposition of Fe0.64Ni0.36@C-doped MgH2 reduced from 162.8 ± 8.3 kJ/mol to 86.9 ± 4.6 kJ/mol. It is believed that the Fe@C and Mg2Ni/Mg2NiH4 formed on the surface of Mg/MgH2 act as intermediates of electron transfer between Mg2+ and H–, which synergistically enhanced the hydrogen absorption and desorption kinetics properties of the MgH2. Moreover, the MgH2 co-doped with the multiple in-situ formed active particles shows excellent cycling performance, indicative of potential application in practical hydrogen storage in the near future.

Ding, Zhenmin↗
DOE OSTI2021

Isotopic dependence of the frequency of optical vibrations in molybdenum monohydride

We show that it is currently known that three hydrides – PdH x , MoH x , and TiH x – exhibit an inverse isotope effect in superconductivity. Namely, the phase with a heavier hydrogen isotope, deuterium, has a higher critical temperature. Hydrides and deuterides of palladium have intensively been studied both experimentally and theoretically, but the origin of the isotope effect has not been established with certainty. The commonly accepted explanation is that the effect is likely to be due to the strong anharmonicity of the optical hydrogen vibrations, which was considered to be responsible for the large deviation of the ratio of the fundamental optical frequencies ω H /ω D = 1.51 from the harmonic value $\sqrt{2}$ ≈ 1.41. In the present paper, powder samples of MoH 1.1(1) and MoD 1.07(3) were synthesized under a hydrogen / deuterium pressure of several gigapascals and studied by inelastic neutron scattering (INS) at ambient pressure and T = 10 K. The INS study demonstrated that optical vibrations of H atoms in MoH 1.1 and D atoms in MoD 1.07 are harmonic and the ratio of fundamental optical frequencies ω H /ω D = 1.44 is close to the harmonic value $\sqrt{2}$ ≈ 1.41. This shows that anharmonicity is not a necessary condition for the presence of the inverse isotope effect. The MoD 1.07 sample was additionally studied by neutron diffraction (ND) at ambient pressure and T = 100 K. In agreement with previous ND results for MoH 1.2 , the ND study of MoD 1.07 showed that deuterium atoms occupied almost all octahedral interstitial sites in its hexagonal close-packed metal lattice and formed a NiAs-type crystal structure with the composition close to MoD. The overstoichiometric composition MoD 1.07 of the deuteride is likely to result from a small fraction D/Mo ~ 0.07 of deuterium atoms partially occupying the tetrahedral interstices.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Organic superbases in Lewis pair catalyzed hydrogenations of imines

Organic superbases have recently emerged as powerful components in metal-free catalytic systems, yet their role in frustrated Lewis pair (FLP) catalyzed hydrogenation reactions remain underexplored. In this article, we investigate the diphosphazene superbases P 2 - t Bu (1) and P 2 -Et (2) as base components combined with electronically tunable boranes of formula 9-(X n -C 6 H 5-n )BBN, where X n = 4-NMe₂, 4-OMe, 4-Me, 4-H, 4-F, 4-OCF 3 , 4-CF 3 , 3,5-(CF3), in FLP-catalyzed hydrogenations of imines. While the more sterically encumbered base 1 forms persistent FLPs whose activity correlates with the hydride affinity of the borane, less hindered base 2 generates Lewis acid–base adducts and displays superior catalytic performance, especially with boranes of lower hydride affinity. A systematic screening identified the adduct 2/9-(4-MeO-C 6 H 4 )BBN as the most active catalytic system, achieving quantitative hydrogenation of N-benzylidene aniline at 80 °C and H 2 pressures as low as 40 bar in THF. Multinuclear NMR spectroscopic studies and DFT calculations support a mechanistic scenario in which reversible adduct formation and subsequent dissociation to the free acid–base pair precede heterolytic H₂ cleavage, with adduct stability and borane electrophilicity concurrently dictating catalytic activity. Under optimized conditions, the most active catalyst system, 2/9-(4-MeO-C 6 H 4 )BBN, hydrogenates a broad range of aldimines, including electron-rich 4-NMe₂ and push-pull substrates, mono- and bis-ortho-substituted imines, and selected heteroaryl imines, with excellent yields and selectivity. Collectively, these findings establish design principles for tuning BBN-derived FLP systems and expand the scope of metal-free hydrogenation catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Efficient 15 N hyperpolarization of [ 15 N 3 ]metronidazole antibiotic via spin-relayed pulsed SABRE-SHEATH

Signal Amplification by Reversible Exchange in SHield Enables Alignment Transfer to Heteronuclei (SABRE-SHEATH) is an NMR hyperpolarization technique that relies of the simultaneous exchange of parahydrogen and a to-be-hyperpolarized molecule on the metal center of a polarization-transfer catalyst in a microtesla magnetic field. Until recently, this method has been understood to perform hyperpolarization by establishing level anti-crossings between the nuclear spins of the parahydrogen derived hydrides (acting as a source of hyperpolarization) and those of the substrate. Recently, the application of highly non-intuitive pulse sequences (comprising pulses of microtesla DC fields) was predicted to hyperpolarize nuclear spins more efficiently than the canonical (static-field) SABRE-SHEATH approach. Here we show that by employing a basic “on-off” pulse sequence of rectangular microtesla pulses, it is possible to improve the hyperpolarization efficiency for SABRE-SHEATH of [ 15 N 3 ]metronidazole, an FDA-approved antibiotic (in non-enriched and non-hyperpolarized form) and potential hypoxia sensing molecule. Specifically, we demonstrate that 15N polarization of 18.5 % can be obtained in 80 s of parahydrogen bubbling parahydrogen through a solution containing 20 mM [ 15 N 3 ]metronidazole. In practice, (1.32 ± 0.14)-fold improvements in P 15N was obtained with the pulsed method described here compared to static field technique variant. These results show that pulsed SABRE-SHEATH was successfully applied to 15 N-labeled biologically relevant molecule. Moreover, we also demonstrate that although the pulsed SABRE-SHEATH sequence was designed for polarization transfer from parahydrogen derived hydrides to the metronidazole’s 15 N catalyst-binding site, all three 15 N sites of [ 15 N 3 ]metronidazole attained the hyperpolarized state. This spin-relayed polarization transfer becomes possible due to the 15 N relay network established by their spin-spin J-couplings. The feasibility of the spin-relayed polarization transfer is demonstrated here for the first time for pulsed SABRE-SHEATH (as opposed to the static-field SABRE-SHEATH reported previously) and it paves the way to broad applicability of the technique.

Hyperpolarization↗