Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Gas phase”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Laboratory studies of sticking coefficients and heterogeneous reactions important in the Antarctic stratosphere

Laboratory studies of sticking coefficients of H2O, HCl, Cl2, and HNO3 on ice and heterogeneous reactions of ClONO2 with ice or HCl/ice have been performed in a fast flow reactor. A quadrupole mass spectrometer with electron impact ionization was used as a detector. Measured sticking coefficients are: 0.3 (+0.7, -0.1) for H2O, 0.4 (+0.6, -0.2) for HCL, less than 0.0001 for Cl2, and 0.3 (+0.7, -0.1) for HNO3 at 200 K. The reaction probability of ClONO2 on ice was found to be 0.06 (+ or - 0.03) while HOCl was observed as a sole product in the gas phase. With HCl present in ice, the reaction probability of ClONO2 is greatly enhanced, approaching 0.27 (+0.73, -0.13) while molecular chlorine was found to be the major product in the gas phase. Another reaction product was nitric acid which remained in the solid phase. Since the polar stratospheric clouds contain ice particles or possibly HCl/ice particles on the surface, the present results should be a major factor in producing the observed springtime ozone depletion in the Antarctic stratosphere.

Leu, Ming-Taun↗
NASA NTRS2024

Application of Long-Path Gas Cell Assisted Infrared Spectroscopy for Detection of Lunar Volatiles and Advanced Curation Efforts

The motivation behind analyzing gaseous samples from the Permanently Shadowed Regions (PSRs) on the lunar surface is built upon the volatiles observed during the LCROSS mission. Advanced curation techniques under cold conditions are essential to the critical scientific analysis of these returned samples. The detection of various volatiles in returned samples by gas-phase infrared (IR) spectroscopy is known to be a powerful tool to understand the resources present in planetary bodies and Astro-materials. The identification and quantification of volatile compounds in returned planetary samples and regolith simulants by advanced and custom-built analytical devices are areas of primary research interest in our group and the Planetary Exploration & Astromaterials Research Laboratory (PEARL) facility. In this context, we discuss recent advancements and experimental results for quick analysis of the major volatiles detected by the LCROSS (water, CO 2 , CH 3 OH, and NH 3 ) by a long-path gas cell/FTIR (Fourier Transform Infrared) spectrometer system. The applicability of this system is demonstrated by qualitative analysis of a series of volatiles measured individually. In addition, the linear dependence of absorption intensity on headspace sample volumes was checked by measuring gas-phase IR absorption spectra of increasing volumes of pure CO 2 gas aliquots. Finally, the instrument performance was evaluated by measuring the relative concentration of NH 3 (g) in methanol solution.

Curation↗
DOE OSTI2023

Reaction process involving capillary condensation within a microporous catalyst

Described herein is a catalytic reaction process including introducing one or more gas-phase reactants into a reactor comprising a microporous catalyst having a pore size less than or equal to 2 nm and adjusting the temperature and/or the pressure of the reactor such that one or more of the gas-phase reactants condense within the micropores of the catalyst thereby causing the catalytic reaction to take place in a liquid phase. Additionally, a process for engineering defects on a carboxylate-based metal organic framework (MOF) catalyst is described. The process includes providing a carboxylate-based MOF catalyst; and heating the carboxylate-based MOF catalyst in an inert gas atmosphere at temperatures between about 150° C. and about 900° C.

Aguirrezabal, Iker↗
DOE OSTI2021

Regularized machine learning on molecular graph model explains systematic error in DFT enthalpies

Abstract A major goal of materials research is the discovery of novel and efficient heterogeneous catalysts for various chemical processes. In such studies, the candidate catalyst material is modeled using tens to thousands of chemical species and elementary reactions. Density Functional Theory (DFT) is widely used to calculate the thermochemistry of these species which might be surface species or gas-phase molecules. The use of an approximate exchange correlation functional in the DFT framework introduces an important source of error in such models. This is especially true in the calculation of gas phase molecules whose thermochemistry is calculated using the same planewave basis set as the rest of the surface mechanism. Unfortunately, the nature and magnitude of these errors is unknown for most practical molecules. Here, we investigate the error in the enthalpy of formation for 1676 gaseous species using two different DFT levels of theory and the ‘ground truth values’ obtained from the NIST database. We featurize molecules using graph theory. We use a regularized algorithm to discover a sparse model of the error and identify important molecular fragments that drive this error. The model is robust to rigorous statistical tests and is used to correct DFT thermochemistry, achieving more than an order of magnitude improvement.

36 MATERIALS SCIENCE↗
NASA NTRS1996

Velocity and drop size measurements in a confined, swirl-stabilized, combusting spray

Drop size and velocity measurements in a confined, swirl-stabilized, reacting spray are presented. The configuration consisted of a center-mounted research air-assist atomizer surrounded by a coflowing air stream. A quartz tube surrounded the burner and provided the confinement. Both the air-assist and coflow streams had swirl imparted to them in the same direction with 45-degree-angle swirlers. The fuel and air entered the combustor at ambient temperature. The gas-phase measurements reported were obtained from the velocity drops with a mean diameter of four microns. Heptane fuel was used for all the experiments. Measurements of drop size and velocity, gas-phase velocity and drop number flux are reported for axial distances of 23, 5, 10, 15, 25, and 50 mm downstream of the nozzle. The measurements were performed using a two-component phase/Doppler particle analyzer. Profiles across the entire flowfield are presented.

Bulzan, Daniel L.↗
DOE OSTI2025

Liquid Sorption-Enhanced Haber–Bosch Process

The use of a liquid sorbent in a traditional Haber-Bosch process enables significant improvements in energy efficiency and potential cost savings for arguably the most important chemical process on the planet. The approach presented in this report employs an incompressible liquid sorbent that absorbs and releases ammonia (NH 3 ) under specific conditions. To achieve this, we investigate reactions of ammonia and pure phosphoric acid (H 3 PO 4 , PA), which rapidly neutralize to form an equilibrated solution of monoammonium phosphate (MAP) and diammonium phosphate (DAP) that functions as a reversible and regenerable sorbent. Through intimate contact of the gas-phase Haber-Bosch reaction mixture with this liquid absorbent, complete equilibrium uptake may be achieved in an appropriately sized separator, and facile separation occurs through the use of independent liquid and gas phases. Following depressurization and release of the ammonia product, only the incompressible fluid needs to be repressurized and returned to the reactor. This study documents proof-of-concept absorption and desorption experiments carried out in 75 mL batch reactors, predominantly charged with precise MAP and DAP mixtures that equilibrate at process-relevant temperatures and pressures. We then assemble the first thermodynamic relationships that underlie this advantaged separation strategy, validated by reactive force field (ReaxFF) interatomic potential simulations, and benchmarked with traditional separation routes via process modeling and technoeconomic analysis. The scale of energy consumption in the century-old Haber-Bosch process is massive, and the elegant liquid sorption approach reported here offers opportunities to enhance its energy efficiency for the next frontier of ammonia synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2000

Implications of SWAS Observations for Interstellar Chemistry and Star Formation

A long standing prediction of steady state gas-phase chemical theory is that H2O and O2 are important reservoirs of elemental oxygen and major coolants of the interstellar medium. Analysis of SWAS observations has set sensitive upper limits on the abundance Of O2 and has provided H2O abundances toward a variety of star forming regions. Based on these results, we show that gaseous H2O and O2 are not dominant carriers of elemental oxygen in molecular clouds. Instead the available oxygen is presumably frozen on dust grains in the form of molecular ices, with a significant portion potentially remaining in atomic form, along with CO, in the gas phase. H2O and O2 are also not significant coolants for quiescent molecular gas. In the case of H2O, a number of known chemical processes can locally elevate its abundance in regions with enhanced temperatures, such as warm regions surrounding young stars or in hot shocked gas. Thus, water can be a locally important coolant. The new information provided by SWAS, when combined with recent results from the Infrared Space Observatory, also provide several hard observational constraints for theoretical models of the chemistry in molecular clouds and we discuss various models that satisfy these conditions.

Bergin, Edwin A.↗
DOE OSTI2022

Cool outflows in MaNGA: a systematic study and comparison to the warm phase

ABSTRACT This paper investigates the neutral gas phase of galactic winds via the Na i Dλλ5890, 5895Å feature within z ∼ 0.04 MaNGA galaxies and directly compares their incidence and strength to the ionized winds detected within the same parent sample. We find evidence for neutral outflows in 127 galaxies (∼5 per cent of the analysed line-emitting sample). ${\rm Na\, \small {\rm I}\ D}$ winds are preferentially seen in galaxies with dustier central regions and both wind phases are more often found in systems with elevated star formation rate (SFR) surface densities, especially when there has been a recent upturn in the star formation activity according to the $\rm SFR_{5 \, Myr}/SFR_{800 \, Myr}$ parameter. We find the ionized outflow kinematics to be in line with what we measure in the neutral phase. This demonstrates that, despite their small contributions to the total outflow mass budget, there is value to collecting empirical measurements of the ionized wind phase to provide information on bulk motion in the outflow. Depending on dust corrections applied to the ionized gas diagnostics, the neutral phase has ∼1.2−1.8 dex higher mass outflow rates ($\dot{M}_{\rm out}$), on average, compared to the ionized phase. We quantify scaling relations between $\dot{M}_{\rm out}$ and the strengths of the physical wind drivers (SFR, LAGN). Using a radial–azimuthal stacking method, and by considering inclination dependencies, we find results consistent with biconical outflows orthogonal to the disc plane. Our work complements other multiphase outflow studies in the literature that consider smaller samples, more extreme objects, or proceed via stacking of larger samples.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Quantification of trace iodine using laser-induced breakdown spectroscopy for real-time monitoring of nuclear off-gas streams

This study evaluated the potential of laser-induced breakdown spectroscopy (LIBS) for real-time monitoring of trace gas-phase iodine, which is an element of high significance in nuclear applications due to its long radioactive half-life (as iodine-129), volatility, and biological impact. In anticipation of iodine evolving into off-gas systems in molten salt reactor and nuclear fuel recycling applications, this research aimed to assess LIBS performance in flowing argon and helium matrices; optimize measurement parameters using a multichannel spectrometer; and perform calibrations to assess predictive capabilities and limits of detection (LODs). Experimental results successfully measured gas-phase iodine in flowing argon and helium; however, trace iodine was not detected in air. Optimal delay times were determined to be 10 µs for argon and 1 µs for helium, which are consistent with the expected shorter plasma lifetime in helium relative to argon. An emission line survey was provided with the 206.16, 804.37, 902.24, and 905.83 nm peaks, which were identified as the strongest emission peaks. Calibration models were successfully built in both helium and argon, achieving LODs down to 3 ppm in helium and 5 ppm in argon. The iodine emission at 905.83 nm emerged as the most robust for calibration and was subsequently applied to a time series dataset in argon. The predictive trace confirmed the feasibility of employing LIBS for continuous, online quantification of trace iodine in flowing gas systems.

Andrews, Hunter B. [Oak Ridge National Laboratory ↗
DOE OSTI2022

High Free-Tropospheric Aitken-Mode Aerosol Concentrations Buffer Cloud Droplet Concentrations in Large-Eddy Simulations of Precipitating Stratocumulus

A new Aitken mode aerosol microphysics scheme is developed for a large eddy simulation model in order to better investigate cloud-aerosol interactions in the marine boundary layer and to study the Aitken buffering hypothesis of McCoy et al. (2021), https://doi.org/10.1029/2020jd033529. This scheme extends the single-mode two-moment prognostic aerosol scheme of Berner et al. (2013), https://doi.org/10.5194/acp-13-12549-2013. Seven prognostic variables represent accumulation and Aitken log-normal aerosol modes in air and droplets as well as 3 gas species. Scavenging of interstitial and other unactivated aerosol by cloud and rain drops are treated using the scheme described in Berner et al. (2013), https://doi.org/10.5194/acp-13-12549-2013. The scheme includes coagulation of unactivated aerosol and a simple chemistry model with gas phase H 2 SO 4 , SO 2 , and DMS as prognostic variables to capture basic influences of sulfur chemistry on the model aerosols. Nucleation of H 2 SO 4 aerosol particles from gas-phase H 2 SO 4 is neglected. A deep, precipitating stratocumulus case (VAMOS Ocean Cloud Atmosphere Land Study RF06) is used to test the new scheme. The presence of the Aitken mode aerosol increases the cloud droplet concentration through activation of the larger Aitken particles and delays the creation of an ultraclean, strongly precipitating cumulus state. Scavenging of unactivated accumulation and Aitken particles by cloud and precipitation droplets accelerates the collapse. Increasing either the above-inversion Aitken concentration or the surface Aitken flux increases the Aitken population in the boundary layer and prevents the transition to an ultraclean state.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1993

Theoretical and Experimental Investigations on Droplet Evaporation and Droplet Ignition at High Pressures

The evaporation of fuel droplets under high ambient pressure and temperature in normal gravity and microgravity has been investigated experimentally. For subcritical ambient conditions, droplet evaporation after a heat-up period follows the d(exp 2)-law. For all data the evaporation constant increases as the ambient temperature increases. At identical ambient conditions the evaporation constant under microgravity is smaller compared to normal gravity. This effect can first be observed at 1 bar and increases with ambient pressure. Preliminary experiments on ignition delay for self-igniting fuel droplets have been performed. Above a 1 s delay time, at identical ambient conditions, significant differences in the results of the normal and microgravity data are observed. Self-ignition occurs within different temperature ranges due to the influence of gravity. The time dependent behavior of the droplet is examined theoretically. In the calculations two different approaches for the gas phase are applied. In the first approach the conditions at the interface are given using a quasi steady theory approximation. The second approach uses a set of time dependent governing equations for the gas phase which are then evaluated. In comparison, the second model shows a better agreement with the drop tower experiments. In both cases a time dependent gasification rate is observed.

Ristau, R.↗
DOE OSTI2026

Predictive Chemical Kinetic Modeling: Where We Succeed, Where We Struggle, and What Comes Next

Chemical kinetic modeling plays a foundational role in fields ranging from energy to environmental science, pharmaceuticals, and advanced materials. The past two decades have seen remarkable progress, particularly in modeling gas-phase reactions for thermochemical processes, leading to impactful industrial applications such as steam cracking and air quality management. However, new challenges are emerging. The successful development of systematic methodologies for the description of gas-phase kinetics opens the possibility to apply the same approach to the study of more challenging systems. Here, we review recent advances, including ab initio transition state theory-based master equation estimation of elementary rates, automated mechanism generation, machine-learning-assisted kinetics, and uncertainty quantification, and discuss the advances needed to apply the same methodological approach in areas such as heterogeneous catalysis, electrochemistry, liquid-phase and solid-state reactivity, and multiscale model integration. We advocate for the development of targeted tools, especially methods that go beyond empirical tuning toward first-principles-based predictions. We highlight the need for accessible software and AIaugmented workflows to democratize modeling for industry and academia alike. In this perspective, we call attention to not only what has worked but also what remains unsolved, advocating to avoid overemphasizing successes in scientific works at the expense of realism. The next decade should focus on predictive capability, physical accuracy, and community infrastructure (e.g., databases and services) to enable innovation across diverse fields. We argue that kinetic modeling, properly equipped, can accelerate discovery far beyond its traditional domains.

ab initio calculations↗
DOE OSTI2024

Photoinduced hydrogen dissociation in thymine predicted by coupled cluster theory

The fate of thymine upon excitation by ultraviolet radiation has been the subject of intense debate. Today, it is widely believed that its ultrafast excited state gas phase decay stems from a radiationless transition from the bright ππ* state to a dark nπ* state. However, conflicting theoretical predictions have made the experimental data difficult to interpret. Here we simulate the early gas phase ultrafast dynamics in thymine at the highest level of theory to date. This is made possible by performing wavepacket dynamics with a recently developed coupled cluster method. Our simulation confirms an ultrafast ππ* to nπ* transition (τ = 41 ± 14 fs). Furthermore, the predicted oxygen-edge X-ray absorption spectra agree quantitatively with experiment. We also predict an as-yet uncharacterized πσ* channel that leads to hydrogen dissociation at one of the two N-H bonds. Similar behavior has been identified in other heteroaromatic compounds, including adenine, and several authors have speculated that a similar pathway may exist in thymine. However, this was never confirmed theoretically or experimentally. This prediction calls for renewed efforts to experimentally identify or exclude the presence of this channel.

Kjønstad, Eirik F.↗
NASA NTRS1988

Silane and germane plasma diagnostics for depositing photosensitive a-SiGe:H films

Highly photosensitive a-SiGe:H films with a light-to-dark conductivity ratio of 8 x 103 and an optical bandgap of 1.40 eV have been produced by RF glow discharge using hydrogen dilution of SiH4 and GeH4 mixed gas plasma. The critical role of hydrogen dilution in GeH4 containing plasmas is to suppress the gas-phase polymerization and promote the incorporation of Ge into the film. It is observed that inelastic laser light scattering of the RF plasma is a sensitive method for monitoring the onset of the gas-phase polymerization. In situ coherent anti-Stokes Raman spectroscopy measurements have shown that the dissociation rate of GeH4 is a factor of three larger than that of SiH4.

Shing, Y. H.↗
NASA NTRS2001

KISS: Kinetics and Structure of Superagglomerates Produced by Silane and Acetylene

The objective of this study is to understand the process of gas phase agglomeration leading to superagglomerates and a gel-like structure for microgravity (0-g) silane and acetylene flames. Ultimately one would apply this understanding to predicting flame conditions that could lead to the gas phase production of an aero-gel. The approach is to burn acetylene and silane and to analyze the evolution of the soot and silica agglomerates. Acetylene is chosen because it has one of the highest soot volume fractions and there is evidence of super agglomerates being formed in laminar acetylene flames. Silane has the advantage that silica particles are the major combustion product resulting in a particle volume fraction a factor of ten greater than that for a carbonaceous smoke.

Mulholland, G. W.↗
DOE OSTI2026

Mechanistic Insights for Plasma-Catalytic CO 2 Reduction over TiO 2 in a Dielectric Barrier Discharge Reactor

Reaction kinetics experiments coupled with phenomenological kinetic modeling and parameter estimation are used to elicit insights into the mechanism and active sites for the plasma-catalytic dissociation of CO 2 on TiO 2 . Experimental and model insights showed that gas-phase reactions contribute at least two-thirds of the overall product formation at explored conditions; weak temperature dependence, strong sensitivity to specific energy input (SEI), apparent first order in CO 2 , and positive influence of cofed argon (Ar) and oxygen (O 2 ) for the gas-phase contributions all suggest that expected plasma reaction steps such as electron-impact and high-energy collisions are the dominant modes for CO 2 dissociation. The Arrhenius-like expression for gas contributions resulted in a preexponential of 4.40 × 10 –3 s –1 , an E SEI,g of 7.90 × 10 –4 mol/kJ, and an E a,g of 1.00 × 10 –3 J/mol. For surface contributions, the small apparent barrier of 16.3 kJ/mol, relatively weaker dependence on SEI, first-order dependence on CO 2 , and insensitivity to cofed Ar and O 2 all point to CO 2 dissociation on TiO 2 surface facets without vacancies and aided by plasma (leading to vibrationally excited CO 2 and/or a reactive surface with significant surface charge accumulation). The Arrhenius-like expression resulted in a preexponential of 7.81 × 10 –2 s –1 , an E SEI,s of 1.90 × 10 –3 mol/kJ, and an E a,s of 1.63 × 10 4 J/mol. The derived kinetic model further enabled a systematic evaluation of the effect of inputs (plasma power, flow rate, CO 2 inlet concentration, and temperature) to identify process trends and optimal operating conditions.

catalyst↗
NASA NTRS1988

Modelling ignition characteristics of rich H2/O2 mixture in a monolithic catalytic reactor

Ignition of rich hydrogen-oxygen mixture in a monolithic catalytic reactor is studied using a transient combustion model. The model assumes a quasi-steady gas phase and a thermally-thin substrate. The ignition time lag is due to the thermal inertia of the substrate. One-step global chemical reaction is assumed both on the surface and in the gas phase. An effectiveness factor is introduced to account for the transition from a kinetically-limited catalytic surface reaction to a diffusion-limit one during ignition. Results presented include a catalytic ignition boundary, ignition delay time and the transient response in the catalytic bed.

Tien, Ta-Ching↗
NASA NTRS1991

Radiation-Controlled, Opposed-Flow Flame Spread in a Microgravity Environment

The effects of surface and gas-phase radiation on the rate and the structure of laminar flame spread over thin fuels are investigated using a flame-spread model which consists of the continuity, momentum, species, and energy equations in the gas and the continuity and energy equations in the solid. Numerical calculations, complemented by scaling arguments, show that, at high velocities of the oxidizer flow, radiation effects are unimportant; the spread rate decreases with increasing opposing velocity due to finite-rate gas-phase kinetics. However, radiation becomes progressively important when the opposing velocity is below a certain value: the flame cools, shrinks in size, and its spread rate falls sharply with decreasing opposing velocity.

Bhattacharjee, Subrata↗