Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Field stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Science observations with the IUE using the one-gyro mode

The International Ultraviolet Explorer (IUE) attitude control system originally included an inertial reference package containing six gyroscopes for three axis stabilization. The science instrument includes a prime and redundant Field Error Sensor (FES) camera for target acquisition and offset guiding. Since launch, four of the six gyroscopes have failed. The current attitude control system utilizes the remaining two gyros and a Fine Sun Sensor (FSS) for three axis stabilization. When the next gyro fails, a new attitude control system will be uplinked, which will relay on the remaining gyro and the FSS for general three axis stabilization. In addition to the FSS, the FES cameras will be required to assist in maintaining fine attitude control during target acquisition. This has required thoroughly determining the characteristics of the FES cameras and the spectrograph aperture plate as well as devising new target acquisition procedures. The results of this work are presented.

Imhoff, C.↗
NASA NTRS1977

Laboratory studies of lean combustion

The fundamental processes controlling lean combustion were observed for better understanding, with particular emphasis on the formation and measurement of gas-phase pollutants, the stability of the combustion process (blowout limits), methods of improving stability, and the application of probe and optical diagnostics for flow field characterization, temperature mapping, and composition measurements. The following areas of investigation are described in detail: (1) axisymmetric, opposed-reacting-jet-stabilized combustor studies; (2) stabilization through heat recirculation; (3) two dimensional combustor studies; and (4) spectroscopic methods. A departure from conventional combustor design to a premixed/prevaporized, lean combustion configuration is attractive for the control of oxides of nitrogen and smoke emissions, the promotion of uniform turbine inlet temperatures, and, possibly, the reduction of carbon monoxide and hydrocarbons at idle.

Sawyer, R. F.↗
NASA NTRS1990

Buoyancy-driven instabilities and the nonlinear breakup of a sheared magnetic layer

Motivated by problems concerning the storage and subsequent escape of the solar magnetic field, a study has been made of how a magnetic layer embedded in a convectively stable atmosphere evolves due to axisymmetric instabilities driven by magnetic buoyancy. The initial equilibrium consists of a toroidal field sheared by a weaker poloidal component. The linear stability problem is investigated for both ideal and resistive MHD, and the nonlinear evolution is followed by numerical integration of the equations of motion. In all cases, the instability is greatly affected by the distribution and strength of the poloidal field. In particular, both the horizontal and vertical scales of the motions are controlled by the location of the surface on which the poloidal field vanishes: the resonant surface. In the nonlinear regime, a resonant surface close to the interface between the magnetized and field-free fluid leads to the localization of the instability, so that only a fraction of the magnetic region is disrupted by the motions. By contrast, a deeply seated resonant surface leads to the complete disruption of the layer and to the formation of large, helical magnetic fragments whose identity is preserved for the entire simulation.

Cattaneo, Fausto↗
DOE OSTI2025

Efforts to stabilize composite localization elements

Localization finite elements seek to provide a robust framework for modeling ductile failure. They utilize the same constitutive model as the bulk material through the introduction of a length scale in a specialized deformation gradient that regularizes displacement discontinuity. Similar to many other elements, localization elements exhibit locking and associated pressure oscillations under incompressible plastic flow, which is a critical issue when attempting to model pressure-driven damage evolution. These issues can be drastically improved through what are essentially reduced integration techniques for the Jacobian and pressure, but there seem to be pressure-related instabilities that persist and are specific to localization elements. This memo summarizes recent efforts to mitigate and understand this problem, mostly for the 12-node composite wedge localization element in particular. At this point, it remains unclear whether the pressure fields within any localization element can be sufficiently stabilized in order to properly model failures that include softening or fracture.

36 MATERIALS SCIENCE↗
NASA NTRS2020

The Heliospheric Current Sheet in the Inner Heliosphere Observed by the Parker Solar Probe

The Parker Solar Probe (PSP) completed its first solar encounter in 2018 November, bringing it closer to the Sun than any previous mission. This allowed in situ investigation of the heliospheric current sheet (HCS) inside the orbit of Venus. The Parker observations reveal a well defined magnetic sector structure placing the spacecraft in a negative polarity region for most of the encounter. The observed current sheet crossings are compared to the predictions of both potential field source surface and magnetohydrodynamic models. All the model predictions are in good qualitative agreement with the observed crossings of the HCS. The models also generally agree that the HCS was nearly parallel with the solar equator during the inbound leg of the encounter and more significantly inclined during the outbound portion. The current sheet crossings at PSP are also compared to similar measurements made by the Wind spacecraft near Earth at 1 au. After allowing for orbital geometry and propagation effects, a remarkable agreement has been found between the observations of these two spacecraft underlying the large-scale stability of the HCS. Finally, the detailed magnetic field and plasma structure of each crossing is analyzed. Marked differences were observed between PSP and Wind measurements in the type of structures found near the HCS. This suggests that significant evolution of these small solar wind structures takes place before they reach 1 au.

Szabo, Adam↗
NASA NTRS1973

Pulsar magnetospheres, braking index, polar caps, and period-pulse-width distribution.

An investigation is conducted concerning the trapping of gas and its effect on the structure of the magnetic field. The aligned and orthogonal cases are discussed in detail. In each case, there are small collection zones which are both microscopically and macroscopically stable. By determining where macroscopic stability changes to instability, the separatrix between closed and open field lines is investigated together with the sizes and shapes of the polar caps. This information makes it possible to reexamine the period-pulse-width distribution and to compare it with observational data.

Roberts, D. H.↗
NASA NTRS1993

SeaWiFS technical report series. Volume 10: Modeling of the SeaWiFS solar and lunar observations

Post-launch stability monitoring of the Sea-viewing Wide Field-of-view Sensor (SeaWifs) will include periodic sweeps of both an onboard solar diffuser plate and the moon. The diffuser views will provide short-term checks and the lunar views will monitor long-term trends in the instrument's radiometric stability. Models of the expected sensor response to these observations were created on the SeaWiFS computer at the National Aeronautics and Space Administration's (NASA) Goddard Space Flight Center (GSFC) using the Interactive Data Language (IDL) utility with a graphical user interface (GUI). The solar model uses the area of intersecting circles to simulate the ramping of sensor response while viewing the diffuser. This model is compared with preflight laboratory scans of the solar diffuser. The lunar model reads a high-resolution lunar image as input. The observations of the moon are simulated with a bright target recovery algorithm that includes ramping and ringing functions. Tests using the lunar model indicate that the integrated radiance of the entire lunar surface provides a more stable quantity than the mean of radiances from centralized pixels. The lunar model is compared to ground-based scans by the SeaWiFS instrument of a full moon in December 1992. Quality assurance and trend analyses routines for calibration and for telemetry data are also discussed.

Woodward, Robert H.↗
DOE OSTI2025

Néel domain walls with bistable chirality in a perpendicularly magnetized ferrimagnetic insulator

Field-free spin-orbit torque-driven domain wall motion in magnetic thin films with perpendicular magnetic anisotropy (PMA) requires the domain walls to have Néel character. Conventionally, Néel domain walls are stabilized by the Dzyaloshinskii-Moriya interaction (DMI) in ultrathin films. Here, in a europium iron garnet thin film with PMA and an additional uniaxial in-plane anisotropy, we demonstrate two bistable Néel domain wall states in the absence of DMI, and the capability to toggle the wall states with an in-plane field pulse and consequently their directions of motion under a current pulse. We present a phase diagram for the bistable Néel domain wall states as a function of in-plane field pulse width and amplitude. By fitting the experimental data to an analytical model of Néel wall reversal through the nucleation and propagation of Bloch lines, we extract the length of the initial reversed domain wall segment and Bloch line nucleation energy barrier. Current-driven motion of in-plane anisotropy stabilized Néel walls is qualitatively different from that of DMI-stabilized ones owing to the different symmetry of the effective fields that stabilize the Néel configuration. Furthermore, we present a proof of principle demonstration for 2-bit random number generation based on the stochastic reversal of domain wall chirality. These results provide critical insight into the topological energy barrier of Bloch lines and identify paths towards domain wall-based memory and computing devices.

36 MATERIALS SCIENCE↗
NASA NTRS1996

Interface Morphology During Crystal Growth: Effects of Anisotropy and Fluid Flow

The effect of a parallel shear flow and anisotropic interface kinetics on the onset of instability during growth from a supersaturated solution is analyzed. The model used for anisotropy is based on the microscopic picture of step motion. A shear flow (linear Couette flow or asymptotic suction profile) parallel to the crystal solution interface in the same direction as the step motion decreases interface stability. A shear flow counter to the step motion enhances stability and for sufficiently large shear rates the interface is absolutely morphologically stable. For large wave numbers, the perturbed flow field can be neglected and a simple analytic approximation for the stability-instability demarcation is found.

Coriell, S. R.↗
NASA NTRS1998

Finite Element Modeling of Magnetically-Damped Convection during Solidification

A fully 3-D, transient finite element model is developed to represent the magnetic damping effects on complex fluid flow, heat transfer and electromagnetic field distributions in a Sn- 35.5%Pb melt undergoing unidirectional solidification. The model is developed based on our in- house finite element code for the fluid flow, heat transfer and electromagnetic field calculations. The numerical model is tested against numerical and experimental results for water as reported in literature. Various numerical simulations are carried out for the melt convection and temperature distribution with and without the presence of a transverse magnetic field. Numerical results show that magnetic damping can be effectively applied to stabilize melt flow, reduce turbulence and flow levels in the melt and over a certain threshold value a higher magnetic field resulted in a greater reduction in velocity. Also, for the study of melt flow instability, a long enough running time is needed to ensure the final fluid flow recirculation pattern. Moreover, numerical results suggest that there seems to exist a threshold value of applied magnetic field, above which magnetic damping becomes possible and below which the 0 convection in the melt is actually enhanced.

deGroh, H. C.↗
DOE OSTI2022

Role of Metal Selection in the Radiation Stability of Isostructural M-UiO-66 Metal–Organic Frameworks

Robust and versatile metal–organic frameworks (MOFs) have emerged as sophisticated scaffolds to meet the critical needs of the nuclear community, but their performance depends on their underexplored structural integrities in high- radiation fields. The contributions of selected metal nodes in the radiation stability of MOFs within the isostructural M-UiO-66 series (where M = Zr, Ce, Hf, Th, and Pu; Zr-UiO-66 experiments were executed in a previous work) have been determined. Ce-, Hf-, and Th-UiO-66 MOF samples were irradiated via gamma and He-ion methodologies to obtain doses up to 3 MGy and 85 MGy, respectively, the latter strikingly higher than that obtained in most other studies. Appreciable self-irradiation constituted the total absorbed doses, up to 31 MGy of the gamma-irradiated Pu-UiO-66 samples. Structural degradation was ascertained by powder X-ray diffraction, X-ray total scattering, vibrational spectroscopy, and, where possible, N 2 physisorption isotherms. Diffuse reflectance infrared Fourier transform spectroscopy provided atomic-level mechanistic insights to reveal that the node-linker connection was most susceptible to radiation damage. Density functional theory calculations were performed on cluster models to evaluate the binding energy of the linkers to each metal node. Here, while the isostructures disclosed the same breakdown signatures, distinct radiation sensitivity as a function of metal selection was evident and followed the trend Hf-UiO-66 ~ Zr-UiO-66 > Th-UiO-66 > Pu-UiO-66 > Ce-UiO-66. We anticipate that these endeavors will contribute to the rational design of radiation-resistant materials for targeted applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1976

Undercooling of materials during solidification in space

A theoretical research program was undertaken on the under cooling and solidification of materials under variable external field conditions. A catalog of theories and models of nucleation of solid phases in the melt is provided, as is a discussion of the relation of undercooling to intermolecular potentials, the dependence of growth rate on undercooling, the influence of undercooling on liquid-solid interface stability and solid structure, the direct effects of external fields on melts, the relation of solid physical properties to structure and the role of nucleants in solidification. Results of the theoretical analysis of several experiments related to the space processing applications program are given, and recommendations for future experiments and further theoretical developments along with procedures for correlation of theory and experiment are specified.

Miller, R. I.↗
DOE OSTI2023

Neutralizing topological obstructions to bubbles of nothing

Theories with compact extra dimensions can exhibit a vacuum instability known as a bubble of nothing. These decay modes can be obstructed if the internal manifold is stabilized by fluxes, or if it carries Wilson lines for background gauge fields, or if the instanton is incompatible with the spin structure. In each of these cases the decay can proceed by adding dynamical charged membranes or gauge fields. We give a general, bottom-up procedure for constructing approximate bubble of nothing solutions in models with internal spheres stabilized by flux and study the influence of the brane tension on the tunneling exponent, finding two branches of solutions that merge at a minimal superextremal value of the tension. In the case of Wilson operators and incompatible fermions, the relevant bubble is shown to be the Euclidean Reissner-Nordstrom black hole, and the ordinary decay exponent is modified by 1/g 2 effects. We examine the Dirac operator on this background and comment on the relevance for models of supergravity with gauged R-symmetry.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Solid Amine CO2 Adsorbent Degradation: Insights from Experiments and Atomistic Simulations

Direct air capture (DAC) has received significant attention this decade as a viable solution to limit global warming, although large-scale deployment is currently not economically feasible. To reach the ambitious cost target set by the U.S. of $100/ton CO2 captured and stored, significant improvements must be made to sorbent lifetime and capacity. Aminosilanes grafted onto silica supports are promising candidates for deployment in DAC systems due to their relatively high oxidative stability and low regeneration temperature. Despite myriad advancements in the field, there still exists a fundamental knowledge gap relating sorbent structure to performance. In this work, we grafted various aminosilanes onto the highly porous silica SBA-15 and characterized both oxidative stability and CO2 capacity. Material properties systematically investigated included amine moiety (primary vs. secondary), silane group structure, number of linkages to the silica support, and co-addition of impregnated amines (e.g., PEI), among others. A fixed bed system was used to execute accelerated degradation studies in the presence of humidity and varying temperatures to simulate realistic operating conditions. Atomistic simulations were combined with the experimental results to gain mechanistic insight, ultimately informing the design of next-generation materials

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1971

Remanent magnetization of lunar samples.

The remanent magnetization of samples returned from the moon by the Apollo 11 and 12 missions consists, in most cases, of two distinct components. An unstable component is readily removed upon alternating field (AF) demagnetization in fields less than 100 Oe and is considered to be an isothermal remanence acquired during or after return to earth. The second component is unaltered by demagnetization in fields up to 400 Oe. It is probably a thermoremanent magnetization due to cooling from above 800 C in the presence of a field of a few thousand gammas. Chips from individual rocks have the same direction of magnetization after demagnetization, while the directions of different samples are random. This again demonstrates the high stability. Our data imply that the moon experienced a magnetic field that lasted at least from about 3.0 to 3.8 b.y., which is the age of Apollo 11 and 12 samples. One explanation of the origin of this field is that the moon had a liquid core and a self-exciting dynamo early in its history.

Strangway, D. W.↗
NASA NTRS1989

The Kelvin-Helmholtz instability at the magnetopause and inner boundary layer surface

Observations by the vector electron spectrometer on the ISEE 1 spacecraft are used to directly check the incompressible hydromagnetic stability condition given by Hasegawa (1975), which indicates how stability is influenced by the velocity shear, density ratio, magnetic field, and the direction of the wave vector of the unstable wave mode. The magnetopause is generally found to be stable, by a large margin. In contrast, many cases of marginal stability or instability are found across density transitions in, and at the inner edge of, the boundary layer for wave vectors in plausible directions. It thus appears that the Kelvin-Helmholtz instability is of importance at the inner edge of the magnetospheric boundary layer, as predicted by MHP theory.

Ogilvie, Keith W.↗
NASA NTRS2015

Lunar Orbit Stability for Small Satellite Mission Design

The irregular nature of the lunar gravity field will severely affect the orbit lifetime and behavior of future lunar small satellite missions. These spacecraft need stable orbits that do not require large deltaV budgets for station-keeping maneuvers. The initial classical elements of any lunar orbit are critical to address its stability and to comply with mission requirements. This publication identifies stable regions according to different initial conditions at the time of lunar orbit insertion (LOI). High fidelity numerical simulations with two different gravity models were performed. We focus in low altitude orbits where the dominant force in orbit propagation is the existence of unevenly distributed lunar mass concentrations. These orbits follow a periodic oscillation in some of the classical elements that is particularly useful for mission design. A set of orbital maintenance strategies for various mission concepts is presented.

Lunar Science↗