Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLEETS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Analysis of In-Route Wireless Charging for the Shuttle System at Zion National Park

System right-sizing is critical to implementation of wireless power transfer (WPT) for electric vehicles. This study will analyze potential WPT scenarios for the electrification of shuttle buses at Zion National Park utilizing a modelling tool developed by the National Renewable Energy Laboratory called WPTSim. This tool uses second-by-second speed, location, and road grade data from the conventional shuttles in operation to simulate the incorporation of WPT at fine granularity. Vehicle power and state of charge are simulated over the drive cycle to evaluate potential system designs. The required battery capacity is determined based on the rated power at a variable number of charging locations. The outcome of this work is an analysis of the design tradeoffs for the electrification of the shuttle fleet with wireless charging versus conventional overnight charging.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2024

Well‐to‐wheels analysis of greenhouse gas emissions for passenger vehicles in Middle East and North Africa

Battery electric vehicles (BEVs) are widely considered a pathway to achieve low carbon mobility. BEVs emit zero emissions from the tailpipe, but their life cycle carbon reduction compared to gasoline vehicles varies based on primary energy sources, electricity generation, and use efficiency. The Middle East and North Africa (MENA) region is an area rich in fossil fuels, meriting a detailed comparison between the emissions from BEV and other powertrains. We developed a MENA‐specific life cycle model that estimates well‐to‐wheel (WTW) greenhouse gas (GHG) emissions from passenger transport with internal combustion engine vehicles (ICEVs), hybrid electric vehicles (HEVs), plug‐in hybrid electric vehicles, and BEVs. MENA's average WTW GHG emissions for all supply chain steps including combustion emissions from vehicle operation are 767 g/kWh and 84 g CO 2 eq/MJ for electricity and gasoline, respectively, but are highly variable due to heterogeneity in upstream supply chains. The use of hybrid gasoline ICEVs provides the largest emission reduction opportunity for existing vehicle fleets in 9 of the 16 MENA countries. For these nine countries, replacing gasoline ICEVs with HEVs could, on average, reduce country‐level life cycle GHG emissions by 47%. There is a similar emission reduction opportunity for 14 of the 16 MENA countries when normalizing vehicle efficiencies irrespective of the powertrain shares and other trends in existing vehicle fleets. Future scenario analysis shows that BEVs would have the lowest WTW GHG emissions among all powertrains in most MENA countries only if significantly reduced electricity transmission losses and cleaner grid mix are realized, although a high cost of infrastructure developments is expected.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Wear of Wave Energy Converters Mooring Lines Belts

Using a belt as a replacement for a rope on a rotary power take-offs (PTOs) system has become more common for wave energy converters, improving cyclic bend over sheave performance with a smaller bending thickness for belts. However, the service life predictions of PTOs are a major concern in design, because belt performance under harsh underwater environments is largely less studied. Here, in this work, the effect of fleet and twist angles on wear life is being investigated both experimentally and numerically. Two three-dimensional equivalent static finite element models are constructed to evaluate the complex stress state of polyurethane-steel belts around steel drums. The first is to capture the response of the experimental investigation performed on the wear life, and the second to predict the wear life of an existing functional PTO. The results show a significant effect for fleet and twist angles on stress concentrations and estimated service life.

16 TIDAL AND WAVE POWER↗
DOE OSTI2014

Measuring linac photon beam energy through EPID image analysis of physically wedged fields

Purpose: Electronic portal imaging devices (EPIDs) have proven to be useful tools for measuring several parameters of interest in linac quality assurance (QA). However, a method for measuring linac photon beam energy using EPIDs has not previously been reported. In this report, such a method is devised and tested, based on fitting a second order polynomial to the profiles of physically wedged beams, where the metric of interest is the second order coefficientα. The relationship between α and the beam quality index [percentage depth dose at 10 cm depth (PDD{sub 10})] is examined to produce a suitable calibration curve between these two parameters. Methods: Measurements were taken in a water-tank for beams with a range of energies representative of the local QA tolerances about the nominal value 6 MV. In each case, the beam quality was found in terms of PDD{sub 10} for 100 × 100 mm{sup 2} square fields. EPID images of 200 × 200 mm{sup 2} wedged fields were then taken for each beam and the wedge profile was fitted in MATLAB 2010b (The MathWorks, Inc., Natick, MA). α was then plotted against PDD{sub 10} and fitted with a linear relation to produce the calibration curve. The uncertainty in α was evaluated by taking five repeat EPID images of the wedged field for a beam of 6 MV nominal energy. The consistency of measuring α was found by taking repeat measurements on a single linac over a three month period. The method was also tested at 10 MV by repeating the water-tank crosscalibration for a range of energies centered approximately about a 10 MV nominal value. Finally, the calibration curve from the test linac and that from a separate clinical machine were compared to test consistency of the method across machines in a matched fleet. Results: The relationship betweenα and PDD{sub 10} was found to be strongly linear (R{sup 2} = 0.979) while the uncertainty in α was found to be negligible compared to that associated with measuring PDD{sub 10} in the water-tank (±0.3%). The repeat measurements over a three month period showed the method to be reasonably consistent (i.e., well within the limits defined by local QA tolerances). The measurements were repeated on a matched machine and the same linear relationship between α and PDD{sub 10} was observed. The results for both machines were found to be indistinguishable across the energy range of interest (i.e., across and close to the thresholds defined by local QA tolerances), hence a single relation could be established across a matched fleet. Finally, the experiment was repeated on both linacs at 10 MV, where the linear relationship between α and PDD{sub 10} was again observed. Conclusions: The authors conclude that EPID image analysis of physically wedged beam profiles can be used to measure linac photon beam energy. The uncertainty in such a measurement is dominated by that associated with measuring PDD{sub 10} in the water-tank; hence, the accuracies of these two methods are directly comparable. This method provides a useful technique for quickly performing energy constancy measurements while saving significant clinical downtime for QA.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2018

Global carbon intensity of crude oil production

Producing, transporting, and refining crude oil into fuels such as gasoline and diesel accounts for ~15 to 40% of the “well-to-wheels” life-cycle greenhouse gas (GHG) emissions of transport fuels. Reducing emissions from petroleum production is of particular importance, as current transport fleets are almost entirely dependent on liquid petroleum products, and many uses of petroleum have limited prospects for near-term substitution (e.g., air travel). Better understanding of crude oil GHG emissions can help to quantify the benefits of alternative fuels and identify the most cost-effective opportunities for oil-sector emissions reductions. Yet, while regulations are beginning to address petroleum sector GHG emissions, and private investors are beginning to consider climate-related risk in oil investments, such efforts have generally struggled with methodological and data challenges. First, no single method exists for measuring the carbon intensity (CI) of oils. Second, there is a lack of comprehensive geographically rich datasets that would allow evaluation and monitoring of life-cycle emissions from oils. We have previously worked to address the first challenge by developing open-source oil-sector CI modeling tools [OPGEE, supplementary materials (SM) 1.1]. Furthermore, we address the second challenge by using these tools to model well-to-refinery CI of all major active oil fields globally—and to identify major drivers of these emissions.

02 PETROLEUM↗
DOE OSTI2019

Routing and Infrastructure simulation for Shared Electric vehicles (RISE)

FERIS is an agent-based model that simulates the activity of a fleet of electric taxis in a metropolitan area. Agent activities include serving trips, rebalancing to anticipate future demand, and relocating to charge. The modeling framework allows researchers to study the impact of different routing algorithms, battery range, and charging infrastructure on fleet performance, energy consumption, environmental impact, and cost of service.

Bauer, Gordon↗
DOE OSTI2019

HeadCount (Automated & Anonymous In-Vehicle Occupancy Detection and Counting) [SWR 19-14]

The HeadCount software is filling a transportation information gap by counting how many people take each rideshare ride. The transportation industry is undergoing rapid transformation. Personally-driven trips via privately owned vehicles are being replaced by commercial services such as ride-hailing and car-sharing. In the same time, municipalities have increasingly expressed interest in the movement of people, rather than just vehicles. However, there is a lack of technology to collect vehicle occupancy data to quantify the movement of people at a large scale. Existing means of counting vehicle occupants have proven insufficient for a variety of reasons. Most notably, these include complicated installations (outfitted seatbelt sensors with dedicated wiring), reliance on technology adoption (cell phone signal counting), driver participation (manual survey entry), etc. These limitations have hindered all interested stakeholders: vehicle fleet owners continue to be unaware of the number of serviced customers, researchers still rely on hand written survey information, and municipalities have no reliable technology to enforce occupancy-based measures (HOV lanes, passenger-based tolls, etc.). Therefore, an automated in-vehicle occupancy detection and counting system was designed to collect vehicle occupancy data with minimal human effort involved. This technology is the first of its kind with low cost, simple installation, and high accuracy. In fact, the device correctly identified the number of occupants in 99.7% of cases. Occupancy detection relates to many applications, ranging from energy intensity quantification and incentivizing high occupancy vehicle to fleet management and optimization.

Moniot, Matthew↗
DOE OSTI2025

Firm Synthesizer and Supply-chain Simulator (SynthFirm) v2.0

SynthFirm is a national-scale agent-based freight demand model which generates a complete synthetic population of firms in the U.S. and the business-to-business commodity flows between them. Using publicly available data sources as inputs, SynthFirm simulates detailed firm and fleet characteristics, commodity production and consumption, formation of supply chains, and selection of shipping modes, all of which are essential drivers of commodity flow at a disaggregate level. The SynthFirm 2.0 version includes national commercial vehicle fleet generation, international trade simulation and automized model validation pipeline, which allows seemless deployment across the nation and build a comprehensive freight inventories at national scale or for selected region.

Yang, Hung-Chia [Lawrence Berkeley National Labora↗
DOE OSTI2018

Quantitative Evaluation of MD/HD Vehicle Electrification using Statistical Data

This paper presents a wide-ranging analysis of Class 3-8 commercial vehicle electrification by means of developing a framework tool which uses a quantitative method of estimating electric vehicle energy consumption and appropriate charging considerations. The Fleet DNA composite statistics on real-world driving behavior is used to evaluate feasible or market-ready battery electric vehicle (BEV) technologies in medium- and heavy-duty (MD/HD) applications. In the paper, ten representative Class 3-8 commercial vehicle electrifications have been evaluated as a function of various service coverages, including applications in port drayage tractors, refuse trucks, delivery trucks, buses, and bucket trucks. The results indicate significant energy savings and fuel cost savings across all MD/HD vehicle electrifications. The majority of MD BEVs, with the exception of Class 3 bucket trucks, achieve better than a 5-year payback with 50–75% service coverage. For HD BEVs, with the exception of the Class 8 port drayage tractors, the 90% service coverage results in a 10-year or longer payback time, while the 50% service coverage yields a 7–8 year payback. Class 8 port drayage tractors should achieve payback in no more than a 3.5 years with 50–75% service coverage. Thus, the analysis indicates a highly feasible potential for Class 3-6 MD vehicles to be electrified, and feasible opportunities for electrification in Class 7-8 HD short-distance applications.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2021

Transportation Fuel Resiliency: Case Study of Tampa Bay

Here, this case study presents findings from an analysis of the emergency preparation and response for Hurricane Irma, the most recent hurricane impacting the Tampa Bay region. The Tampa Bay region, in particular, is considered one of the most vulnerable areas in the United States to hurricanes and severe tropical weather. A particular vulnerability stems from how all petroleum fuel comes to the area by marine transport through Port Tampa Bay, which can be (and has been in the past) impacted by hurricanes and tropical storms. The case study discussed in this paper covers previous fuel challenges, vulnerabilities, and lessons learned by key Tampa Bay public agency fleets during the past 10 years (mainly as a result of the most recent 2017 Hurricane Irma) to explore ways to improve the area’s resilience to natural disasters. Some of the strategies for fuel-supply resiliency include maintaining emergency fuel supply, prioritizing fuel use, strategically placing the assets around the region to help with recovery, investing in backup generators (including generators powered by alternative fuels), planning for redundancies in fuel supply networks, developing more efficient communication procedures between public fleets, hurricane preparedness-planning, and upgrading street drainage systems to reduce the threat of local flooding.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2021

Development of in-use engine speed/torque heat maps across multiple heavy-duty commercial vehicle vocations

The U.S. Department of Energy (DOE) established the SuperTruck program with the goal of achieving brake thermal efficiency (BTE) greater than or equal to 55% as demonstrated in an operational heavy-duty (HD) diesel engine at a 65-miles-per-hour (mph) cruise point. Beyond the line-haul application, HD engines operate in a wide range of speed and torque conditions that are unlikely to yield the same efficiency under real-world operation. Thereby, the in-use engine heat maps described in this paper are a valuable tool to illustrate whether the engine-efficiency “sweet spot” matches the most frequent operating conditions. In this study, NREL developed engine heat maps to quantify the important operating points for various vocations using our Fleet DNA database of commercial fleet vehicle operations data. These heat maps clearly show that high-frequency operating points vary significantly according to vehicle vocation, while only a few of them match the sweet spot. Beyond the illustration, engine in-use heat maps can also be leveraged to build up reduced-order engine-efficiency models, needed by many rapid powertrain simulations. As case studies, nine reduced-order models – including line-haul truck, transfer truck, transit bus, transit bus with compressed natural gas (CNG) engine, drayage, refuse pickup, local delivery, utility truck, and school bus with CNG engine – using a trust-region reflective algorithm to fit the on-road data extracted based on the engine in-use heat maps.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2017

Metrics for the technical performance evaluation of light water reactor accident-tolerant fuel

The safe, reliable, and economic operation of the nation’s nuclear power reactor fleet has always been a top priority for the nuclear industry. Continual improvement of technology, including advanced materials and nuclear fuels, remains central to the industry’s success. Enhancing the accident tolerance of light water reactors (LWRs) became a topic of serious discussion following the 2011 Great East Japan Earthquake, resulting tsunami, and subsequent damage to the Fukushima Daiichi nuclear power plant complex. The overall goal for the development of accident-tolerant fuel (ATF) for LWRs is to identify alternative fuel system technologies to further enhance the safety, competitiveness, and economics of commercial nuclear power. Designed for use in the current fleet of commercial LWRs or in reactor concepts with design certifications (GEN-III+), fuels with enhanced accident tolerance would endure loss of active cooling in the reactor core for a considerably longer period of time than the current fuel system while maintaining or improving performance during normal operations. The complex multiphysics behavior of LWR nuclear fuel in the integrated reactor system makes defining specific material or design improvements difficult; as such, establishing desirable performance attributes is critical in guiding the design and development of fuels and cladding with enhanced accident tolerance. Research and development of ATF in the United States is conducted under the U.S. Department of Energy (DOE) Fuel Cycle Research and Development Advanced Fuels Campaign. The DOE is sponsoring multiple teams to develop ATF concepts within multiple national laboratories, universities, and the nuclear industry. Concepts under investigation offer both evolutionary and revolutionary changes to the current nuclear fuel system. This study summarizes the technical evaluation methodology proposed in the United States to aid in the optimization and prioritization of candidate ATF designs.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Development of Cable Aging Acceptance Criteria for Nuclear Facilities

The aging of nuclear power plant electrical cables has been the subject of substantial research and development (R&D) projects in the nuclear industry, national and international laboratories, universities, and vendor organizations for several years. More specifically, these R&D efforts were conducted to develop equipment and techniques for assessing age-related degradation of in-service cables in nuclear facilities including power plants, research reactors, waste facilities and fuel fabrication plants. In recent years, cable R&D efforts in the nuclear arena have also included work to develop new cables for the next generation of reactors. Over time, exposure to harsh environmental conditions such as elevated temperatures, radiation, and humidity in nuclear installations can result in age-related degradation and failure of cables. In the current fleet of nuclear reactors, there are thousands of miles of cabling installed in each plant and many of these cables are exposed to these harsh environmental conditions. For these cables, the jacket and insulation polymers harden and become brittle over time, making them more susceptible to crack formation and growth, moisture intrusion, and other mechanisms that can lead to cable failure. Moreover, the existing U.S. fleet of 98 nuclear reactors has an average operating age of 38 years. Many of these nuclear power plants have applied for and almost all have been granted regulatory approval for license renewals to operate for 60 years, 20 years beyond their original 40-year life. Further, subsequent license renewals (SLRs) are underway with a few commercial nuclear power sites already approved to operate up to 80 years. As these reactors pursue operating life extensions, utilities must find a way to address issues associated with age-related degradation of cables. Designers of small modular reactors are also in need of technologies to evaluate the performance of cables that will be installed in harsher environments (e.g. higher temperatures, radiation doses, dose rates, etc.) than those present in current-generation reactors. Today, a variety of cable condition monitoring (CM) techniques have been developed and successfully used in nuclear facilities. These techniques are used to identify age-related degradation and assess the condition of cables to determine if their performance characteristics have changed with age. However, objective criteria must be developed for these CM tests to help quantify cable condition and thereby develop repair and replacement schedules. With operating life extending to 80 years and more SLRs on the horizon, both nuclear facilities and regulators need an objective means to determine the aged condition of cables.

36 MATERIALS SCIENCE↗
DOE OSTI2021

PHYSICS-BASED AUTOMATED REASONING FOR HEALTH MONITORING: SENSOR SET SELECTION

This paper addresses the problem of how to select a sensor set for equipment health monitoring that meets the needs of advanced O&M tasks that target cost reduction. They include maintenance optimization and asset management for the existing fleet and near-autonomous operation as currently envisioned for advanced reactors. The method uses physics-based automated reasoning to provide for a more “explainable” diagnosis. The algorithm is described along with its implementation on a computational cluster. Preliminary results for application to a use case in the current fleet are described.

diagnosis↗
DOE OSTI2026

2013 California Vehicle Survey

The 2013 California Vehicle Survey (CVS) collected data on household and commercial vehicle usage, and on future vehicle purchases. ICF International conducted the survey on behalf of the California Energy Commission. Approximately 8,000 respondents, from California households and businesses, completed the survey. The household component of the CVS included a selection of households from the 2010-2012 California Household Travel Survey (CHTS), who had stated their intention to purchase a vehicle in the near future. Both household surveys used the same survey ID numbers enabling the integration of responses. The commercial vehicle component of the CVS—a stand-alone survey of commercial fleet owners in California—asked vehicle owners questions pertaining to economic and demographic attributes, current fleets, and preferences about planned vehicle purchases.

1Hz data↗
DOE OSTI2026

EV Shuttle Bus Pilot

The EV Shuttle Bus Pilot dataset contains data and analysis from Hocking-Athens-Perry Community Action's demonstration of an electric bus on routes of their rural Athens Public Transit system. The vehicle used in the demonstration was a Ford E-450 cutaway equipped with an electric drivetrain, a 127-kWh battery system by Motiv Power Systems, and a cabin upfit by Turtle Top. Data gathered include route assignments, running time and distance, fuel economy, and charge cycles. A comparison of the vehicle's observed duty cycle with duty cycle modeling from other rural transit fleets in the National Transit Database is included to help better understand the rural adoption potential for this fleet technology.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

Ride Pingo to Transit

In this project, we developed an on-demand microtransit first- and last-mile service. To integrate the service with fixed-route transit, we developed a feature called Transit Connect that prioritized riders’ on-time arrival at the transit station over other service requirements. We first prototyped service and related algorithms in a simulated environment, and then piloted the service in the city of Kent, Washington. Our algorithm incorporates request-specific hard drop-off deadlines to ensure timely arrivals for transit transfers. In the pilot, these constraints were obtained from GTFS Realtime data to accurately determine the schedule of the transit and the location of the stations. This approach introduced the ability to accept or decline new requests based on the timing of transit connections for these new requests and connection status of onboarding customers. The pilot (called “Ride Pingo to Transit”) deployed a fleet of three 14-person vans, ran from September 2021 to March 2023, and served a total of 21,329 trips. Transit Connect was offered for drop-offs at both Kent Station and the Kent Valley hub. In total, 2,844 such trips were completed. This dataset was collected from our pilot, which includes the following: - Requests: List of all trip requests, including those that were actually served and those not materialized. - Fleet: Daily vehicle service logs. - Service details: Daily vehicle stop logs (boarding and alighting). - Trip types: First mile, last mile, or point-to-point. ![pingo to transit](pingo-to-transit.jpg)

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2013

Long-Term Instrumentation, Information, and Control Systems (II&C) Modernization Future Vision and Strategy

Life extension beyond 60 years for the U.S operating nuclear fleet requires that instrumentation and control (I&C) systems be upgraded to address aging and reliability concerns. It is impractical for the legacy systems based on 1970’s vintage technology operate over this extended time period. Indeed, utilities have successfully engaged in such replacements when dictated by these operational concerns. However, the replacements have been approached in a like-for-like manner, meaning that they do not take advantage of the inherent capabilities of digital technology to improve business functions. And so, the improvement in I&C system performance has not translated to bottom-line performance improvement for the fleet. Therefore, wide-scale modernization of the legacy I&C systems could prove to be cost-prohibitive unless the technology is implemented in a manner to enable significant business innovation as a means of off-setting the cost of upgrades.

99 GENERAL AND MISCELLANEOUS↗