Glass-coated soil breccia 15205 - Selenologic history and petrologic constraints on the nature of its source region
Explore the source record for details and available documents.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Silicon nitride (SiN, where Si:N ≠ 1:1) films low pressure-chemical vapor deposited on Si substrates, Si films on Ge on Si substrates, and p-Si samples were exposed to plasma beams emanating from CH{sub 3}F/O{sub 2} or CH{sub 3}F/CO{sub 2} inductively coupled plasmas. Conditions within the plasma beam source were maintained at power of 300 W (1.9 W/cm{sup 3}), pressure of 10 mTorr, and total gas flow rate of 10 sccm. X-ray photoelectron spectroscopy was used to determine the thicknesses of Si/Ge in addition to hydrofluorocarbon polymer films formed at low %O{sub 2} or %CO{sub 2} addition on p-Si and SiN. Polymer film thickness decreased sharply as a function of increasing %O{sub 2} or %CO{sub 2} addition and dropped to monolayer thickness above the transition point (∼48% O{sub 2} or ∼75% CO{sub 2}) at which the polymer etchants (O and F) number densities in the plasma increased abruptly. The C(1s) spectra for the polymer films deposited on p-Si substrates appeared similar to those on SiN. Spectroscopic ellipsometry was used to measure the thickness of SiN films etched using the CH{sub 3}F/O{sub 2} and CH{sub 3}F/CO{sub 2} plasma beams. SiN etching rates peaked near 50% O{sub 2} addition and 73% CO{sub 2} addition. Faster etching rates were measured in CH{sub 3}F/CO{sub 2} than CH{sub 3}F/O{sub 2} plasmas above 70% O{sub 2} or CO{sub 2} addition. The etching of Si stopped after a loss of ∼3 nm, regardless of beam exposure time and %O{sub 2} or %CO{sub 2} addition, apparently due to plasma assisted oxidation of Si. An additional GeO{sub x}F{sub y} peak was observed at 32.5 eV in the Ge(3d) region, suggesting deep penetration of F into Si, under the conditions investigated.
Purpose: To design a reliable method to determine the optimal parameter in the adaptive region-growing (ARG) algorithm for tumor segmentation in PET. Methods: The ARG uses an adaptive similarity criterion m - fσ ≤ I-PET ≤ m + fσ, so that a neighboring voxel is appended to the region based on its similarity to the current region. When increasing the relaxing factor f (f ≥ 0), the resulting volumes monotonically increased with a sharp increase when the region just grew into the background. The optimal f that separates the tumor from the background is defined as the first point with the local maximum curvature on an Error function fitted to the f-volume curve. The ARG was tested on a tumor segmentation Benchmark that includes ten lung cancer patients with 3D pathologic tumor volume as ground truth. For comparison, the widely used 42% and 50% SUVmax thresholding, Otsu optimal thresholding, Active Contours (AC), Geodesic Active Contours (GAC), and Graph Cuts (GC) methods were tested. The dice similarity index (DSI), volume error (VE), and maximum axis length error (MALE) were calculated to evaluate the segmentation accuracy. Results: The ARG provided the highest accuracy among all tested methods. Specifically, the ARG has an average DSI, VE, and MALE of 0.71, 0.29, and 0.16, respectively, better than the absolute 42% thresholding (DSI=0.67, VE= 0.57, and MALE=0.23), the relative 42% thresholding (DSI=0.62, VE= 0.41, and MALE=0.23), the absolute 50% thresholding (DSI=0.62, VE=0.48, and MALE=0.21), the relative 50% thresholding (DSI=0.48, VE=0.54, and MALE=0.26), OTSU (DSI=0.44, VE=0.63, and MALE=0.30), AC (DSI=0.46, VE= 0.85, and MALE=0.47), GAC (DSI=0.40, VE= 0.85, and MALE=0.46) and GC (DSI=0.66, VE= 0.54, and MALE=0.21) methods. Conclusions: The results suggest that the proposed method reliably identified the optimal relaxing factor in ARG for tumor segmentation in PET. This work was supported in part by National Cancer Institute Grant R01 CA172638; The dataset is provided by AAPM TG211.
X-ray photoemission spectroscopy operating under ambient pressure conditions is used to probe ion distributions throughout the interfacial region of a free-flowing aqueous liquid micro-jet of 6 M potassium fluoride. Varying the energy of the ejected photoelectrons by carrying out experiments as a function of x-ray wavelength measures the composition of the aqueous-vapor interfacial region at various depths. The F{sup -} to K{sup +} atomic ratio is equal to unity throughout the interfacial region to a depth of 2 nm. The experimental ion profiles are compared with the results of a classical molecular dynamics simulation of a 6 M aqueous KF solution employing polarizable potentials. The experimental results are in qualitative agreement with the simulations when integrated over an exponentially decaying probe depth characteristic of an APPES experiment. First principles molecular dynamics simulations have been used to calculate the potential of mean force for moving a fluoride anion across the air-water interface. The results show that the fluoride anion is repelled from the interface, and this is consistent with the depletion of F{sup -} at the interface revealed by the APPES experiment and polarizable force field-based molecular dynamics simulation. Together, the APPES and MD simulation data provide a detailed description of the aqueous-vapor interface of alkali fluoride systems. This work offers the first direct observation of the ion distribution at a potassium fluoride aqueous solution interface. The current experimental results are compared to those previously obtained for saturated solutions of KBr and KI to underscore the strong difference in surface propensity between soft/large and hard/small halide ions in aqueous solution.
This paper investigates stability regions for a non-static restricted class of axially symmetric geometry filled with anisotropic, heat radiating and shearing viscous fluid that collapses non-adiabatically. In this context, dynamical equations as well as collapse equation are constructed through perturbation scheme with f(R) = R+εR{sup 2} model. We then develop dynamical instability regions at Newtonian and post-Newtonian eras. It is concluded that pressure anisotropy and heat dissipation increases the instability regions of the collapsing system while shearing viscosity as well as f(R) dark sourced terms decrease them during collapse. Finally, we calculate our results under constant curvature condition and GR limit, i.e., f(R)→R.
In all supersymmetric theories, gravitinos, with mass suppressed by the Planck scale, are an obvious candidate for dark matter; but if gravitinos ever reached thermal equilibrium, such dark matter is apparently either too abundant or too hot, and is excluded. However, in theories with an axion, a saxion condensate is generated during an early era of cosmological history and its late decay dilutes dark matter. We show that such dilution allows previously thermalized gravitinos to account for the observed dark matter over very wide ranges of gravitino mass, keV < m 3/2 < TeV, axion decay constant, 10 9 GeV < f a < 10 16 GeV, and saxion mass, 10 MeV < m s < 100 TeV. Constraints on this parameter space are studied from BBN, supersymmetry breaking, gravitino and axino production from freeze-in and saxion decay, and from axion production from both misalignment and parametric resonance mechanisms. Large allowed regions of (m 3/2 , f a , m s ) remain, but differ for DFSZ and KSVZ theories. Superpartner production at colliders may lead to events with displaced vertices and kinks, and may contain saxions decaying to (WW, ZZ, hh), gg, γγ or a pair of Standard Model fermions. In conclusion, freeze-in may lead to a sub-dominant warm component of gravitino dark matter, and saxion decay to axions may lead to dark radiation.
Turbulence in the equatorial Pacific cold tongue plays multiple roles in the sea-surface temperature budget. However, observations of turbulence are limited to a handful of field experiments lasting from a few days to one month at 0 N , 140 W, and the key turbulent fluxes can only be inferred. Although explicit simulations of turbulence resolve these fluxes, the required large eddy simulations (LES) are costly and thus also limited to a few weeks. A two-fold hypothesis motivates this contribution to the PUMP pre-field modelling experiments in support of TPOS: 1) that there exist useful relationships between the surface wind, wave, and buoyancy forcing, oceanic shear and stratification, and turbulent mixing, but 2) these relationships differ between regions of equatorial dynamics (f~0) and higher latitudes, such that the state space is insufficiently sampled to understand these relationships and represent them in ocean general circulation models (OGCM). To address the lack of observations, we simulated 35 continuous days of upper ocean turbulence using LES during October-November 1985 at sites in two regions (70 days in total) of the cold tongue: 0 N, 140 W and 3 N, 140 W. The model reproduces many features of the observed turbulence at 0,140W, including the “deep-cycle” observed by Gregg et al. (1985) Nature and the turbulent pulses every few hours during the night and in the early morning. Furthermore, the results at 3 N support the hypothesis advanced by Cherian et al. (2021) JPO that strong, but intermittent deep-cycle turbulence is observed to the north of the equator in the presence of strong shear associated with Tropical Instability Waves. Comparisons with the K-profile parameterization (KPP) scheme show that additional tuning of the KPP parameters can reduce differences between the turbulent fluxes produced by KPP and LES at both sites. The results will suggest modifications to OGCMs and already emphasize the need for a more extensive measurements of vertical profiles of shear, stratification and turbulent mixing to reveal the spatio-temporal structure of turbulence and how it relates to forcing, shear and stratification across the equatorial Pacific Cold tongue.
Undoped and RE ions doped SrB{sub 2}Si{sub 2}O{sub 8} were successfully synthesized. After the application of UV and VUV spectroscopy measurements, we made a novel discovery that the emission of SrB{sub 2}Si{sub 2}O{sub 8}:Eu prepared in air can be switched between red and blue by the different excitations. The information is that quite a part of Eu{sup 3+} was spontaneously reduced to Eu{sup 2+} in air. The PL properties of Eu{sup 2+} in VUV and Eu{sup 3+}, Ce{sup 3+} and Tb{sup 3+} in UV-VUV region in SrB{sub 2}Si{sub 2}O{sub 8} were evaluated for the first time. The excitation mechanisms of the O{sup 2-}Eu{sup 3+} CT, Ce{sup 3+}f-d and Tb{sup 3+}f-d transitions in UV region as well as the Eu{sup 3+}f-d, O{sup 2-}Ce{sup 3+} CT, O{sup 2-}Tb{sup 3+} CT transitions and the host lattice absorption in VUV region were established. In addition, first principles calculation within the LDA of the DFT was applied to calculate the electronic structure and linear optical properties of SrB{sub 2}Si{sub 2}O{sub 8} and the results were compared with the experimental data. - Graphical abstract: The emissions of SrB{sub 2}Si{sub 2}O{sub 8}:Eu prepared in air can be switched between the red (611 nm) and the blue (440 nm) by different excitations: under 254 nm excitation the Eu{sup 3+} red emission is dominant while under 365 nm excitation the Eu{sup 2+} blue emission presides at the emission spectra; when excited by 340 nm it emits almost the pure blue; and when excited by 395 nm the two emissions present nearly equivalent intensity.
In this study, we investigate the feasibility of using a fluoroalkyl-substituted fullerene/perovskite heterojunction (f-FPHJ) to realize efficient and ambient stable perovskite solar cells (PVSCs). The hybrid fluoroalkyl-substituted fullerene, DF-C 60 , is proven to effectively passivate the defects and grain boundaries in the perovskite film to facilitate charge transport/collection in the derived PVSC. Consequently, the f-FPHJ device yielded an enhanced PCE of 18.11%, outperforming that of the pristine CH 3 NH 3 PbI 3 device (15.67%). More interestingly, the f-FPHJ PVSC showed a decent PCE of 15.14% (under reverse scan) with small hysteresis even without employing a discrete PCBM electron-transporting layer (ETL), in contrast to the pristine PVSC showing a lower PCE of 14.78% (under reverse scan) accompanied with severe hysteresis. This might arise from the preferential distribution of DF-C 60 nearby the surface region of the f-FPHJ film due to its low surface energy, which serves the similar function of the PCBM ETL in device to reduce hysteresis. More importantly, benefitting from the hydrophobic nature of DF-C 60 , the f-FPHJ PVSC shows respectable ambient stability without encapsulation, which can maintain 83% of its initial PCE after being stored in ambient (with a relative humidity of 60 ± 5%) for 1 month.
Two rockets launched into spread F during March 1983 show that the intermediate-scale spectrum of density irregularities sometimes exhibits a knee near 1 km scale length. This result confirms previous reports which are reviewed. Two different nonlinear theories of spread F turbulence are studied here and shown to be consistent with the experimental spectra when the knee is observed. Also, the existence or nonexistence of the knee may be effected by two linear mechanisms: the injection of kilometer scale turbulence at the steepened walls of spread F bubbles and the nonlocal role of the compressible E region in the development of spread F. This spectral feature, which seems to be associated with the most turbulent state of equatorial spread F, has not yet been identified in computer simulations.
Using RHESSI hard X-ray imaging spectroscopy observations, we analyze electron flux maps for a number of extended coronal loop flares. For each event, we fit a collisional model with an extended acceleration region to the observed variation of loop length with electron energy E, resulting in estimates of the plasma density in, and longitudinal extent of, the acceleration region. These quantities in turn allow inference of the number of particles within the acceleration region and hence the filling factor f-the ratio of the emitting volume to the volume that encompasses the emitting region(s). We obtain values of f that lie mostly between 0.1 and 1.0; the (geometric) mean value is f = 0.20 Multiplication-Sign / Division-Sign 3.9, somewhat less than, but nevertheless consistent with, unity. Further, coupling information on the number of particles in the acceleration region with information on the total rate of acceleration of particles above a certain reference energy (obtained from spatially integrated hard X-ray data) also allows inference of the specific acceleration rate (electron s{sup -1} per ambient electron above the chosen reference energy). We obtain a (geometric) mean value of the specific acceleration rate {eta}(20 keV) =(6.0 Multiplication-Sign / Division-Sign 3.4) Multiplication-Sign 10{sup -3} electrons s{sup -1} per ambient electron; this value has implications both for the global electrodynamics associated with replenishment of the acceleration region and for the nature of the particle acceleration process.
A new oxyfluoride glass of 50BaF{sub 2}-25Al{sub 2}O{sub 3}-25B{sub 2}O{sub 3} (mol. %) with a large fraction of fluorine, i.e., F/(F + O) = 0.4, was prepared using a conventional melt-quenching method in order to synthesize new glass-ceramics containing nonlinear optical oxyfluoride crystals. The refractive index at 632.8 nm and ultra-violet cutoff wavelength of the glass were 1.564 and {approx}200 nm, respectively. Eu{sup 3+} ions in the glass showed a high quantum yield of 88% in the photoluminescence spectrum in the visible region. BaAlBO{sub 3}F{sub 2} crystals (size: 50-100 nm) showing second harmonic generations were formed through the crystallization of the glass. Lines consisting of BaAlBO{sub 3}F{sub 2} crystals were patterned successfully on the glass surface by laser irradiations (Yb:YVO{sub 4} laser with a wavelength of 1080 nm, laser power of 1.1 W, scanning speed of 8 {mu}m/s). High resolution transmission electron microscope observations combined with a focused ion beam technique indicate that BaAlBO{sub 3}F{sub 2} crystals are highly oriented just like a single crystal. The present study proposes that the new oxyfluoride glass and glass-ceramics prepared have a high potential for optical device applications.
In the article density-orbital embedding (DOE) theory is proposed. DOE is based on the concept of density orbital (DO), which is a generalization of the square root of the density for real functions and fractional electron numbers. The basic feature of DOE is the representation of the total supermolecular density {rho}{sub s} as the square of the sum of the DO {phi}{sub a}, which represents the active subsystem A and the square root of the frozen density {rho}{sub f} of the environment F. The correct {rho}{sub s} is obtained with {phi}{sub a} being negative in the regions in which {rho}{sub f} might exceed {rho}{sub s}. This makes it possible to obtain the correct {rho}{sub s} with a broad range of the input frozen densities {rho}{sub f} so that DOE resolves the problem of the frozen-density admissibility of the current frozen-density embedding theory. The DOE Euler equation for the DO {phi}{sub a} is derived with the characteristic embedding potential representing the effect of the environment. The DO square {phi}{sub a}{sup 2} is determined from the orbitals of the effective Kohn-Sham (KS) system. Self-consistent solution of the corresponding one-electron KS equations yields not only {phi}{sub a}{sup 2}, but also the DO {phi}{sub a} itself.
Brain-behavior studies using 18 F-FDG PET aim to reveal brain regions that become active during behavior. In standard protocols, 18 F-FDG is injected, the behavior is executed during 30–60 min of tracer uptake, and then the animal is anesthetized and scanned. Hence, the uptake of 18 F-FDG is not itself observed and could, in fact, be complete in very little time. This has implications for behavioral studies because uptake is assumed to reflect concurrent behavior. Here, we utilized a new, miniature PET scanner termed RatCAP to measure uptake simultaneously with behavior. We employed a novel injection protocol in which we administered 18 F-FDG (i.v.) four times over two 2 h to allow for repeated measurements and the correlation of changes in uptake and behavioral activity. Furthermore, using standard PET methods, we explored the effects of injection route on uptake time in chickens, a model for avians, for which PET studies are just beginning. We found that in the awake, behaving rat most of the 18 F-FDG uptake occurred within minutes and overlapped to a large extent with 18F-FDG data taken from longer uptake periods. By contrast, behavior which occurred within minutes of the 18 F-FDG infusion differed markedly from the behavior that occurred during later uptake periods. Accordingly, we found that changes in 18 F-FDG uptake in the striatum, motor cortex and cerebellum relative to different reference regions significantly predicted changes in behavioral activity during the scan, if the time bins used for correlation were near the injection times of 18 F-FDG. However, when morphine was also injected during the scan, which completely abolished behavioral activity for over 50 min, a large proportion of the variance in behavioral activity was also explained by the uptake data from the entire scan. In anesthetized chickens, tracer uptake was complete in about 80 min with s.c. injection, but 8 min with i.v. injection. In conclusion, uptake time needs to be taken into account to more accurately correlate PET and behavioral data in mammals and avians. Additionally, RatCAP together with multiple, successive injections of 18 F-FDG may be useful to explore changes in uptake over time in relation to changes in behavior.
The dependence of f 0 (980) production on the final-state charged-particle multiplicity in p–Pb collisions at $\sqrt{s_{NN}}$= 5.02 TeV is reported. The production of f 0 (980) is measured with the ALICE detector via the f 0 (980) → π + π – decay channel in a midrapidity region of –0.5 < y < 0. Particle yield ratios of f 0 (980) to π and K*(892) 0 are found to be decreasing with increasing charged-particle multiplicity. The magnitude of the suppression of the f 0 (980)/π and f 0 (980)/K*(892) 0 yield ratios is found to be dependent on the transverse momentum p T , suggesting different mechanisms responsible for the measured effects. Furthermore, the nuclear modification factor Q pPb of f 0 (980) is measured in various multiplicity ranges. The Q pPb shows a strong suppression of the f 0 (980) production in the p T region up to about 4 GeV/c. The results on the particle yield ratios and Q pPb for f 0 (980) may help to understand the late hadronic phase in p–Pb collisions and the nature of the internal structure of f 0 (980) particle.
The original heating load line analysis of ORNL TM-2015/281 was modified to incorporate two adjustments of (1) removing mechanical ventilation and (2) resizing the heat pump units based on new criteria. This resulted in a lowering of the HLL slope factor from the originally rounded 1.3 level to 1.15 in DOE Region IV and V while leaving unchanged the zero-load ambient at a rounded value of 55 F. For the other four DOE regions, the zero-load ambients dropped by 1 to 2 F from those found earlier and the rounded HLL slope factors ranged from 1.05 to 1.3. The average rounded HLL slope factor over all six DOE regions is 1.15. Effects of the revised slope factor on rated HSPFs (Region IV) for single- and two-capacity units dropped from 16% in the original work to 12.6% in this report. For VS units, the HSPF reductions of 14 to 25% in the original report were lowered to a range of 9 to 21%. As in the original report, for VS units that do not limit minimum speed operation below 47 F ambient, the average HSPF reduction for the cases evaluated is approximately the same as for single- and two-capacity units. For VS units that do limit minimum speed operation below 47 F ambient, the lower 1.15 slope factor of this report generally results in small overpredictions of rated HSPF by 1 to 3% compared to functional HSPF. An exception is minimum-speed-limited VS units where the minimum speed COP at 47 F is higher than that at 62 F; one such unit was found to have an HSPF overprediction of over 14% with the 1.15 HLL slope factor level. For such VS exception cases, a default HSPF penalty should be considered. For the more typical VS units that limit minimum speed operation, use of a 1.15 slope factor for rated HSPF was found to still acceptably limit the HSPF error. If slope factors lower than 1.15 are used for HSPF ratings, some means should be considered to appropriately derate the HSPFs for VS units which limit minimum speed operation below 47 F ambient.