Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Excel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

3D Carbon Coating Enabled High‐capacity and Stable Micro‐sized Silicon Suboxide‐graphite Blended Anodes for Practical Lithium‐ion Batteries

Abstract Silicon oxide (SiO x ) is a promising anode candidate of lithium‐ion batteries (LIBs) owing to its extremely high specific capacity. However, the low initial Coulombic efficiency (ICE) and rapid capacity degradation of SiO x , triggered by the enormous volume variation upon repeated (de)lithiation, gravely hinder its practical use. Herein, two mass‐produced micro‐sized SiO x @C composites with obviously different morphologies for commercial LIBs are reported. Particularly, the SiO x ‐graphite blended anode (SiO x @3D‐G‐Gr) based on SiO x wrapped by three‐dimensional (3D) carbon layers (SiO x @3D‐G) exhibits a capacity of 519 mAh g −1 , an ICE of 90.0 % and a capacity retention of 83.4 % at 0.2 C over 100 cycles. which is far exceeding its counterpart SiO x @C‐H‐Gr (65.7 %). The obtained impressive properties of SiO x @3D‐G originate from the critical contribution of 3D carbon layers, which serves as the effective stress buffer and protective layer as well as the strong networks for electron/Li + transport. Accordingly, the full‐cell based on SiO x @3D‐G‐Gr anode and commercial LiCoO 2 cathode delivers a capacity of 803 mAh and an excellent capacity retention of 95.6 % (616 mAh, 96.6 % for graphite, respectively) at 1 C over 100 cycles with a stabilized CE of nearly 100 %. The micro‐sized SiO x @3D‐G showing a promising prospect in the commercial‐grade anodes in LIBs.

Electrochemistry↗
DOE OSTI2024

Development of Tailored Hydrocarbon-Based Pentablock Copolymer Membranes for Sodium-Polysulfide Flow Batteries

Long-duration energy storage (LDES) technologies are pivotal for the adoption of renewables like wind and solar. Non-aqueous redox flow batteries (NARFBs) with a sodium-polysulfide hybrid system feature high energy density independent of power density, yet face challenges with polysulfide shuttling. This study investigates a hydrocarbon-based penta-block copolymer membrane, Nexar, to mitigate crossover effects by balancing TFSI conversion and their crosslink density. The membranes are annealed to induce crosslinking for reducing electrolyte uptake and enhancing mechanical stability while demonstrating excellent ionic conductivity. The hydrocarbon-based membranes address environmental concerns associated with perfluoroalkyl substances and improve the performance and durability of NARFBs. In conclusion, our findings suggest that annealed Nexar membranes with tailored TFSI functionality offer a scalable, cost-effective solution for enhancing the efficiency of high-capacity energy storage systems, pivotal for grid integration of renewable sources.

25 ENERGY STORAGE↗
DOE OSTI2026

Humins-Derived Hard Carbon as a Low-Cost Material for Sodium-Ion Battery Anodes

The growing demand for sodium-ion batteries (SIBs) in grid storage underscores the need for electrode materials that balance performance and cost, including sustainable and robust carbon sources. The equitable and abundant distribution of materials for SIBs, along with their superior low-temperature performance, safety, and fast-charging capability, further distinguishes them from lithium-ion batteries (LIBs). Hard carbon (HC) is the state-of-the-art anode for SIBs, but current commercial HC production is localized mostly to one region of the world, raising concerns about supply chain vulnerability, critical material dependency, and environmental aspects. Here, the first demonstration of humins, an abundant biorefinery byproduct, as a precursor for HC anodes for sodium-ion storage is reported. Humins were carbonized at 1100 degrees C-1300 degrees C, and the resulting materials were subjected to comprehensive materials and electrochemical characterization. Among the temperatures studied, humins-derived hard carbon synthesized at 1200 degrees C delivers an initial reversible capacity 270mA h g-1 , with stable cycling performance up to 500 cycles and excellent rate capability, representing the optimal performance. This study establishes humins as a promising and low-cost carbon source that provides a route to mitigate supply chain risks and valorizes an underutilized biorefinery waste stream for high-performance SIB anodes.

25 ENERGY STORAGE↗
DOE OSTI2023

Quantitative Analysis of The High‐Yield Hydrolysis of Kelp by Laminarinase and Alginate Lyase

Abstract Kelp is an abundant, farmable biomass‐containing laminarin and alginate as major polysaccharides, providing an excellent model substrate to study their deconstruction by simple enzyme mixtures. Our previous study showed strong reactivity of the glycoside hydrolase family 55 during hydrolysis of purified laminarin, raising the question of its reactivity with intact kelp. In this study, we determined that a combination of a single glycoside hydrolase family 55 β‐1,3‐exoglucanase with a broad‐specificity alginate lyase from the polysaccharide lyase family 18 gives efficient hydrolysis of untreated kelp to a mixture of simple sugars, that is, glucose, gentiobiose, mannitol‐end glucose, and mannuronic and guluronic acids and their soluble oligomers. Quantitative assignments from nanostructure initiator mass spectrometry (NIMS) and 2D HSQC NMR spectroscopy and analysis of the reaction time‐course are provided. The data suggest that binary combinations of enzymes targeted to the unique polysaccharide composition of marine biomass are sufficient to deconstruct kelp into soluble sugars for microbial fermentation.

2D HSQC NMR↗
DOE OSTI2020

Bidentate N‐based Ligands for Highly Reusable, Ligand‐coordinated, Supported Pt Hydrosilylation Catalysts

Abstract A significant challenge in designing supported metal‐ligand catalysts for solution‐phase reactions is the stabilization of the metal active sites against leaching into solution. Here, we examine alkene hydrosilylation reactions as model systems to improve the stability of highly dispersed Pt using a metal‐ligand coordination strategy on high surface area oxide supports. By evaluating a series of bidentate N‐based ligands, we demonstrate several design strategies to improve stability of the highly dispersed Pt 2+ centers against leaching, while maintaining a high level of catalytic activity, selectivity, and recyclability for alkene hydrosilylation batch reactions under mild conditions. These involve a bi‐functional approach to ligand design, which considers interaction to the support and a well‐defined coordination environment for the metal active site. Three strategies are reported: modifying ligands for stronger interaction with oxide surfaces, mixing ligands, and pre‐depositing an “anchoring ligand” to the support before loading the metal‐ligand catalyst. Each of these is successful in enhancing Pt recyclability. Particularly, two Pt‐phenanthroline catalysts exhibit excellent reusability for multiple batch reaction cycles, due to high stability of the active Pt species. Addressing the active site leaching problem significantly enhances the utility of ligand‐coordinated supported metal catalysts as highly stable and selective catalysts for solution‐phase reactions.

Chen, Linxiao↗
DOE OSTI2020

Active Learning A Neural Network Model For Gold Clusters & Bulk From Sparse First Principles Training Data

Small metal clusters are of fundamental scientific interest and of tremendous significance in catalysis. These nanoscale clusters display diverse geometries and structural motifs depending on the cluster size; a knowledge of this size-dependent structural motifs and their dynamical evolution has been of longstanding interest. Given the high computational cost of first-principles calculations, molecular modeling and atomistic simulations such as molecular dynamics (MD) has proven to be an important complementary tool to aid this understanding. Classical MD typically employ predefined functional forms which limits their ability to capture such complex size-dependent structural and dynamical transformation. Neural Network (NN) based potentials represent flexible alternatives and in principle, well-trained NN potentials can provide high level of flexibility, transferability and accuracy on-par with the reference model used for training. A major challenge, however, is that NN models are interpolative and requires large quantities (similar to 10 4 or greater) of training data to ensure that the model adequately samples the energy landscape both near and far-from-equilibrium. A highly desirable goal is minimize the number of training data, especially if the underlying reference model is first-principles based and hence expensive. In this work, we introduce an active learning (AL) scheme that trains a NN model on-the-fly with minimal amount of first-principles based training data. Our AL workflow is initiated with a sparse training dataset (similar to 1 to 5 data points) and is updated on-the-fly via a Nested Ensemble Monte Carlo scheme that iteratively queries the energy landscape in regions of failure and updates the training pool to improve the network performance. Using a representative system of gold clusters, we demonstrate that our AL workflow can train a NN with similar to 500 total reference calculations. Using an extensive DFT test set of similar to 1100 configurations, we show that our AL-NN is able to accurately predict both the DFT energies and the forces for clusters of a myriad of different sizes. Our NN predictions are within 30 meV/atom and 40 meV/angstrom of the reference DFT calculations. Moreover, our AL-NN model also adequately captures the various size-dependent structural and dynamical properties of gold clusters in excellent agreement with DFT calculations and available experiments. We finally show that our AL-NN model also captures bulk properties reasonably well, even though they were not included in the training data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Single Atoms Anchored in Hexagonal Boron Nitride for Propane Dehydrogenation from First Principles

We report single-atom catalysts embedded in N-doped graphene have attracted great interest recently, but the hexagonal boron nitride (h-BN) is much less explored as a support. Using first principles density function theory and molecular dynamics, here we investigate the stability of Pt, Au, and Ru single atoms anchored at B and N vacancies on h-BN. We find that Pt and Ru single atoms are much more stable than Au on h-BN. We further examine propane dehydrogenation on these single-atom catalysts and find that Pt 1 at the B vacancy in h-BN and Ru 1 at the N vacancy in h-BN show excellent activity for propane dehydrogenation, as evidenced by low energy barriers for both dehydrogenation steps. Our work suggests that Pt and Ru single atoms anchored at vacancy sites in h-BN could be promising for propane dehydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

NO Reduction with CO on Low‐loaded Platinum‐group Metals (Rh, Ru, Pd, Pt, and Ir) Atomically Dispersed on Ceria

Abstract Low‐loaded platinum‐group single‐atom catalysts on CeO 2 (M 1 /CeO 2 ) were synthesized via high‐temperature atom trapping (AT) and tested for the NO+CO reaction under dry and wet conditions. The activity of these catalysts for NO+CO reaction follows the order Rh>Pd≈Ru>Pt>Ir. For Rh, Ru, and Pd single‐atom catalysts, the N 2 O byproduct is formed but not clearly observed in Ir and Pt cases, which may result from the higher reaction temperature (>200 °C) required for Pt and Ir catalysts. The presence of water can promote the activity of these M 1 /CeO 2 catalysts for the NO+CO reaction. Under wet conditions, significant NH 3 formation occurred during the reaction, which is due to the co‐existence of water‐gas‐shift reaction on these catalysts. Compared with Pt, Pd and Ir, the Rh and Ru single‐atom catalysts show higher selectivity to NH 3 species, resulting from the hydride species on the surface. Among all tested catalysts, Ru 1 /CeO 2 shows the highest production of ammonia and highest CO conversion due to excellent water‐gas‐shift activity, whereas Pd 1 /CeO 2 shows lowest ammonia production. Rh 1 /CeO 2 shows the best low temperature NO reduction activity among all tested catalysts.

Tian, Jinshu↗
DOE OSTI2021

Decoupling Proton and Cation Contributions to Capacitive Charge Storage in Birnessite in Aqueous Electrolytes

Abstract Nanostructured birnessite is of interest as an electrode material for aqueous high power electrochemical energy storage as well as desalination devices. In neutral pH aqueous electrolytes, birnessite exhibits a capacitive response attributed to the adsorption of cations and protons at the outer surface and within the hydrated interlayer. Here, we utilize the understanding of proton‐coupled electron transfer (PCET) in buffered electrolytes to decouple the role of protons and cations in the capacitive charge storage mechanism of birnessite at neutral pH. We find that without buffer, birnessite exhibits primarily potential‐independent (capacitive) behavior with excellent cycling stability. Upon the addition of buffer, the capacity initially increases and the cyclic voltammograms become more potential‐dependent, features attributed to the presence of PCET with the birnessite. However, long‐term cycling in the buffered electrolyte leads to significant capacity fade and dissolution, which is corroborated through ex situ characterization. ReaxFF atomistic scale simulations support the observations that proton adsorption leads to birnessite degradation and that capacitive charge storage in birnessite is primarily attributed to cation adsorption at the outer surface and within the interlayer.

Saeed, Saeed↗
DOE OSTI2022

Oxygen–coordinated low–nucleus cluster catalysts for enhanced electrocatalytic water oxidation

The oxygen evolution reaction (OER) activity of single-atom catalysts (SACs) is closely related to the coordination environment of the active site. Oxygen-coordinated atomic metal species bring about unique features beyond nitrogen-coordinated atomic metal species due to the fact that the M–O bond is weaker than the M–N bond. Herein, a series of metal–oxygen–carbon structured low-nucleus clusters (LNCs) are successfully anchored on the surface of multiwalled carbon nanotubes (M-MWCNTs, M = Ni, Co, or Fe) through a foolproof low-temperature gas transfer (300°C) method without any further treatment. The morphology and coordination configuration of the LNCs at the atomic level were confirmed by comprehensive characterizations. The synthetic Ni-MWCNTs electrocatalyst features excellent OER activity and stability under alkaline conditions, transcending the performances of Co-MWCNTs, Fe-MWCNTs and RuO 2 . Density functional theory calculations reveal that the moderate oxidation of low-nucleus Ni clusters changes the unoccupied orbital of Ni atoms, thereby lowering the energy barrier of the OER rate-limiting step and making the OER process more energy-efficient. This study demonstrates a novel versatile platform for large-scale manufacturing of oxygen-coordinated LNC catalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Surface‐modified Ag@Ru‐P25 for photocatalytic CO 2 conversion with high selectivity over CH 4 formation at the solid–gas interface

Systematic optimization of the photocatalyst and investigation of the role of each component is important to maximizing catalytic activity and comprehending the photocatalytic conversion of CO 2 reduction to solar fuels. A surface-modified Ag@Ru-P25 photocatalyst with H 2 O 2 treatment was designed in this study to convert CO 2 and H 2 O vapor into highly selective CH 4 . Ru doping followed by Ag nanoparticles (NPs) cocatalyst deposition on P25 (TiO 2 ) enhances visible light absorption and charge separation, whereas H 2 O 2 treatment modifies the surface of the photocatalyst with hydroxyl (–OH) groups and promotes CO 2 adsorption. High-resonance transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray absorption near-edge structure, and extended X-ray absorption fine structure techniques were used to analyze the surface and chemical composition of the photocatalyst, while thermogravimetric analysis, CO 2 adsorption isotherm, and temperature programmed desorption study were performed to examine the significance of H 2 O 2 treatment in increasing CO 2 reduction activity. The optimized Ag 1.0 @Ru 1.0 -P25 photocatalyst performed excellent CO 2 reduction activity into CO, CH 4 , and C 2 H 6 with a ~95% selectivity of CH 4 , where the activity was ~135 times higher than that of pristine TiO 2 (P25). For the first time, this work explored the effect of H 2 O 2 treatment on the photocatalyst that dramatically increases CO 2 reduction activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Light Hydrocarbon Separations Using Porous Organic Framework Materials

Light hydrocarbons (C 1 –C 3 ) are used as basic energy feedstocks and as commodity organic compounds for the production of many industrially necessary chemicals. Due to the nature of the raw materials and production processes, light hydrocarbons are generated as mixtures, but the high-purity single-component products are of vital importance to the petrochemical industry. Consequently, the separation of these C 1 –C 3 products is a crucial industrial procedure that comprises a significant share of the total global energy consumption per year. As a complement to traditional separation methods (distillation, partial hydrogenation, etc.), adsorptive separations using porous solids have received widespread attention due to their lower energy costs and higher efficiency. Extensive research has been devoted to the use of porous materials such as zeolites and metal-organic frameworks (MOFs) as solid adsorbents for these key separations, owing to the high porosity, tunable pore structures, and unsaturated metal sites present in these materials. Recently, porous organic framework (POF) materials composed of organic building blocks linked by covalent bonds have also shown excellent properties in light hydrocarbon adsorption and separation, sparking interest in the use of these materials as adsorbents in separation processes. In this Minireview we summarize the recent advances in the use of POFs for light hydrocarbon separations, including the separation of mixtures of methane/ethane, methane/propane, ethylene/ethane, acetylene/ethylene, and propylene/propane, while highlighting the relationships between the structural features of these materials and their separation performances. Finally, the difficulties, challenges, and opportunities associated with leveraging POFs for light hydrocarbon separations are discussed to conclude the review.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Boron-Made N 2 : Realization of a B$\equiv$B Triple Bond in the B 2 Al 3 – Cluster

Until now, all B≡B triple bonds have been achieved by adopting two ligands in the L→B≡B←L manner. Herein, we report an alternative route of designing the B≡B bonds based on the assumption that by acquiring two extra electrons, an element with the atomic number Z can have properties similar to those of the element with the atomic number Z + 2. Specifically, we show that due to the electron donation from Al to B, the negatively charged B≡B kernel in the B 2 Al 3 – cluster mimics a triple N≡N bond. Comprehensive computational searches reveal that the global minimum structure of B 2 Al 3 – exhibits a direct B–B distance of 1.553 Å, and its calculated electron vertical detachment energies are in excellent agreement with the corresponding values of the experimental photoelectron spectrum. Chemical bonding analysis revealed one σ and two π bonds between the two B atoms, thus confirming a classical textbook B≡B triple bond, similar to that of N 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Photoredox Organic Synthesis Employing Heterogeneous Photocatalysts with Emphasis on Halide Perovskite

Abstract Lately, heterogeneous semiconductor materials have been explored as an emerging type of efficient photocatalyst for photoredox organic synthesis. Among these semiconductors, lead halide perovskite materials demonstrate unique properties towards excellent charge separation and charge transfer, extremely long charge carrier migration, high efficiency in visible light absorption, and long excited states lifetimes, etc., as proved in ground‐breaking solar cell applications, garnering necessary merits for an efficient catalytic system for photoredox organic reactions. Here, the latest progress in heterogeneous semiconductor materials towards this endeavor is examined, with particular emphasis on lead halide perovskite nanocrystals (NCs) in photocatalytic organic synthesis.

Lin, Yixiong↗
DOE OSTI2021

Small Molecule Activation with Intramolecular “Inverse” Frustrated Lewis Pairs

The intramolecular “inverse” frustrated Lewis pairs (FLPs) of general formula 1-BR 2 -2-[(Me 2 N) 2 C=N]-C 6 H 4 (3-6) [BR 2 = BMes 2 (3), BC 12 H 8 , (4), BBN (5), BBNO (6)] were synthesized and structurally characterized by multinuclear NMR spectroscopy and X-ray analysis. Furthermore, these novel types of pre-organized FLPs, featuring strongly basic guanidino units rigidly linked to weakly Lewis acidic boryl moieties via an ortho-phenylene linker, are capable of activating H-H, C-H, N-H, O-H, Si-H, B-H and C=O bonds. 4 and 5 deprotonated terminal alkynes to form the zwitterionic borates 1-(RC≡C-BR 2 )-2-[(Me 2 N) 2 C=NH]-C 6 H 4 (R = Ph, H) and reacted with ammonia, BnNH 2 and pyrrolidine, to generate the adducts 1-(R 2 HN→BR 2 )-2-[(Me 2 N) 2 C=NH]-C 6 H 4 , where the N-H functionality is activated by intramolecular H-bond interactions. In addition, 5 was found to rapidly add across the double bond of H 2 CO, PhCHO and PhNCO to form cyclic zwitterionic guanidinium borates in excellent yields. Likewise, 5 is capable of cleaving H 2 , HBPin and PhSiH 3 to form various amino boranes. Collectively, the results demonstrate that these new types of intramolecular FLPs featuring weakly Lewis acidic boryl and strongly basic guanidino moieties are as potent as conventional intramolecular FLPs with strongly Lewis acidic units in activating small molecules.

08 HYDROGEN↗
DOE OSTI2023

Synthesis and Characterization of a Masked Terminal Nickel-Oxide Complex

In exploring terminal nickel-oxo complexes, postulated to be the active oxidant in natural and non-natural oxidation reactions, we report the synthesis of the pseudo-trigonal bipyramidal Ni II complexes (K)[Ni II (L Ph )(DMF)] (1[DMF]) and (NMe 4 ) 2 [Ni II (L Ph )(OAc)] (1[OAc]) (L Ph =2,2’,2’’-nitrilo-tris-(N-phenylacetamide); DMF=N,N-dimethylformamide; - OAc=acetate). Both complexes were characterized using NMR, FTIR, ESI-MS, and X-ray crystallography, showing the L Ph ligand to bind in a tetradentate fashion, together with an ancillary donor. The reaction of 1[OAc] with peroxyphenyl acetic acid (PPAA) resulted in the formation of [(L Ph )Ni III -O-H∙∙∙OAc] 2- , 2, that displays many of the characteristics of a terminal Ni=O species. 2 was characterized by UV-Vis, EPR, and XAS spectroscopies and ESI-MS. 2 decayed to yield a Ni II -phenolate complex 3 (through aromatic electrophilic substitution) that was characterized by NMR, FTIR, ESI-MS, and X-ray crystallography. 2 was capable of hydroxylation of hydrocarbons and epoxidation of olefins, as well as oxygen atom transfer oxidation of phosphines at exceptional rates. While the oxo-wall remains standing, this complex represents an excellent example of a masked metal-oxide that displays all of the properties expected of the ever elusive terminal M=O beyond the oxo-wall.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Development of the Safe and Broad‐Spectrum Aldehyde and Ketoamide Mpro inhibitors Derived from the Constrained α, γ‐AA Peptide Scaffold

Abstract SARS‐CoV‐2 is still wreaking havoc all over the world with surging morbidity and high mortality. The main protease (M pro ) is essential in the replication of SARS‐CoV‐2, enabling itself an active target for antiviral development. Herein, we reported the design and synthesis of a new class of peptidomimetics‐constrained α, γ‐AA peptides, based on which a series of aldehyde and ketoamide inhibitors of the M pro of SARS‐CoV‐2 were prepared. The lead compounds showed excellent inhibitory activity in the FRET‐based M pro enzymatic assay not only for the M pro of SARS‐CoV‐2 but also for SARS‐CoV and MERS‐CoV, along with HCoVs like HCoV‐OC43, HCoV‐229E, HCoV‐NL63 and HKU1. The X‐ray crystallographic results demonstrated that our compounds form a covalent bond with the catalytic Cys145. They also demonstrated effective antiviral activity against live SARS‐CoV‐2. Overall, the results suggest that α, γ‐AA peptide could be a promising molecular scaffold in designing novel M pro inhibitors of SARS‐CoV‐2 and other coronaviruses.

Chemistry↗