Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Energy Exchange”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Inverse Consequences of the SnO 2 Protection Layers on Pt/C Catalysts in Proton-Exchange Membrane Fuel Cells

Proton-exchange membrane fuel cells (PEMFCs) are promising energy-conversion systems, offering an appealing blend of high energy efficiency and low environmental impact. However, carbon corrosion of PEMFCs is known to significantly degrade their performance, remaining a critical challenge to overcome. In this study, we applied a Nb-doped SnO 2 (Nb-SnO 2 ) nanoparticle coating on Pt/C catalysts as a protective layer, with the Sn/C ratio in the precursors varying from 0.25:1 to 2.0:1. Contradictory behaviors of the coated Pt/C catalysts were observed at different Sn/C ratios. The Sn/C = 1.0 sample exhibited improved electrochemically active surface area retention after 500 cycles of accelerated stress testing (AST) but with more significant polarization and resistance increase observed in the polarization curves. In addition, agglomeration of Nb-SnO 2 particles was observed at a higher Sn/C ratio in the AST of a membrane electrode assembly, with less shrinkage of the total thickness of the Nb-SnO 2 -coated Pt/C electrode. We speculate that formation of Nb-SnO 2 agglomerates occurs once the protective layer is broken down or the unprotected carbon surface is corroded and that these Nb-SnO 2 agglomerates increase the tortuosity of the electron pathways and significantly increase the cell polarization.

30 DIRECT ENERGY CONVERSION↗

Interfacial Reactivity-Triggered Oscillatory Lattice Strains of Nanoalloys

Understanding the structure evolution of nanoalloys under reaction conditions is vital to the design of active and durable catalysts. Herein, we report an operando measurement of the dynamic lattice strains of dual-noble-metal alloyed with an earth-abundant metal as a model electrocatalyst in a working proton-exchange membrane fuel cell using synchrotron high-energy X-ray diffraction coupled with pair distribution function analysis. Additionally, the results reveal an interfacial reaction-triggered oscillatory lattice strain in the alloy nanoparticles upon surface dealloying. Analysis of the lattice strains with an apparent oscillatory irregularity in terms of frequency and amplitude using time-frequency domain transformation and theoretical calculation reveals its origin from a metal atom vacancy diffusion pathway to facilitate realloying upon dealloying. This process, coupled with surface metal partial oxidation, constitutes a key factor for the nanoalloy's durability under the electrocatalytic oxygen reduction reaction condition, which serves as a new guiding principle for engineering durable or self-healable electrocatalysts for sustainable fuel cell energy conversion.

Wu, Zhi-Peng [State University of New York (SUNY),↗

Deeply virtual Compton scattering off the neutron

The three-dimensional structure of nucleons (protons and neutrons) is embedded in so-called generalized parton distributions, which are accessible from deeply virtual Compton scattering. In this process, a high-energy electron is scattered off a nucleon by exchanging a virtual photon. Then, a highly energetic real photon is emitted from one of the quarks inside the nucleon, which carries information on the quark's transverse position and longitudinal momentum. By measuring the cross-section of deeply virtual Compton scattering, Compton form factors related to the generalized parton distributions can be extracted. Here, we report the observation of unpolarized deeply virtual Compton scattering off a deuterium target. From the measured photon-electroproduction cross-sections, we have extracted the cross-section of a quasifree neutron and a coherent deuteron. Due to the approximate isospin symmetry of quantum chromodynamics, we can determine the contributions from the different quark flavours to the helicity-conserved Compton form factors by combining our measurements with previous ones probing the proton's internal structure. These results advance our understanding of the description of the nucleon structure, which is important to solve the proton spin puzzle. The internal structure of the neutron has now been probed by highly energetic photons scattering off it. Combined with previous results for protons, these measurements reveal the contributions of quark flavours to the nucleon structure.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The Fermi–Löwdin self-interaction correction for ionization energies of organic molecules

(Semi)-local density functional approximations (DFAs) suffer from self-interaction error (SIE). When the first ionization energy (IE) is computed as the negative of the highest occupied orbital (HO) eigenvalue, DFAs notoriously underestimate them compared to quasi-particle calculations. Here, the inaccuracy for the HO is attributed to SIE inherent in DFAs. We assessed the IE based on Perdew-Zunger self-interaction correction on 14 small to moderate-sized organic molecules relevant in organic electronics and polymer donor materials. Though self-interaction corrected DFAs were found to significantly improve the IE relative to the uncorrected DFAs, they overestimate. However, when the self-interaction correction is interiorly scaled using a function of the iso-orbital indicator zs , only the regions where SIE is significant get a correction. We discuss these approaches and show how these methods significantly improve the description of the HO eigenvalue for the organic molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Isospin mixing and the cubic isobaric multiplet mass equation in the lowest T=2, A=32 quintet

The isobaric multiplet mass equation (IMME) is known to break down in the first T=2,A=32 isospin quintet. In this work we combine high-resolution experimental data with state-of-the-art shell-model calculations to investigate isospin mixing as a possible cause for this violation. The experimental data are used to validate isospin-mixing matrix elements calculated with newly developed shell-model Hamiltonians. Our analysis shows that isospin mixing with nonanalog T=1 states contributes to the IMME breakdown, making the requirement of an anomalous cubic term inevitable for the multiplet.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Search for Dark Matter Induced Deexcitation of 180 Ta m

Weak-scale dark matter particles, in collisions with nuclei, can mediate transitions between different nuclear energy levels. In particular, owing to sizeable momentum exchange, dark matter particles can enable de-excitation of nuclear isomers that are extremely long lived with respect to regular radioactive decays. In this paper, we utilize data from a past experiment with 180 Ta m to search for γ-lines that would accompany dark matter induced de-excitation of this isomer. Non-observation of such transitions above background yields the first direct constraint on the lifetime of 180 Ta m against DM-initiated transitions: T 1/2 > 1.3 × 10 14 a at 90% C.I. Using this result, we derive novel constraints on dark matter models with strongly interacting relics, and on models with inelastic dark matter particles. Existing constraints are strengthened by this independent new method. As a result, the obtained limits are also valid for the Standard Model γ-decay of 180 Ta m .

150 ≤ A ≤ 189↗

Interaction models and configurational entropies of binary MoTa and the MoNbTaW high entropy alloy

We introduce a simplified method to model the interatomic interactions of high entropy alloys based on a lookup table of cluster energies. Furthermore, these interactions are employed in replica exchange Monte Carlo simulations with histogram analysis to obtain thermodynamic properties across a broad temperature range. Kikuchi's cluster variation method entropy formalism is applied to directly calculate entropy from statistics on short- and long-range chemical order, and we discuss the convergence of the entropy as clusters of differing size are included. A high temperature series expansion aids in our understanding of the convergence. Computer codes implementing these methods, and supporting data, are freely available on the internet.

36 MATERIALS SCIENCE↗

Multiphase Modeling in a Parallel Plate Fluidized Bed Receiver for Concentrating Solar Power

A novel high temperature particle solar receiver is developed by using a light trapping planar cavity configuration. As particles fall through the cavity, the concentrated solar radiation warms the boundaries of the receiver and in turn heats the particles. Particles flow through the system, forming a packed bed at the lower end, leaving the system from the bottom at a constant flow rate. Air is introduced to the system as the fluidizing medium to improve particle heat transfer and mixing. A laboratory scale cavity receiver is built and a near IR quartz lamp is used to provide flux to the vertical wall of the heat exchanger. The system is modeled using a continuum two-fluid method. The computational model matches the experimental system size and the particle size distribution is assumed monodisperse. A conduction model that accounts for the effects of solid concentration is implemented, and the heat flux boundary condition matches the experimental setup. Radiative heat transfer is estimated using a widely used correlation during the post-processing step to determine an overall heat transfer coefficient. The model is validated against testing data and achieves less than 30% discrepancy and a heat transfer coefficient greater than 1000 W/m2K.

CSP↗

Multi-Scale Modeling of Hydrogen Transport in a Porous Fuel Cell Anode

Proton-exchange-membrane fuel cells (PEMFC) are a clean energy conversion alternative to traditional fossil-fuel combustion; however, transport resistances in the electrode pose a lower-limit to catalyst loading and commercialization of PEMFCs. PEMFCs consist of simultaneous hydrogen (H 2 ) oxidation and oxygen (O 2 ) reduction at the anode and cathode, respectively. Here, while oxygen transport resistances in PEMFCs have been widely studied both experimentally and analytically, hydrogen transport resistances are less understood. Herein, we present a physics-based model that encompasses multi-scale transport within the anode side of the PEMFC. The O 2 in the cathode here is omitted and replaced with H 2 to deconvolute O 2 transport resistance contributions, similar to that of a hydrogen pump. Replication of the hydrogen pump setup allows for comparison of the model against experimental analysis of H 2 gas-transport resistance in H 2 limiting-current experiments, which can also inform gas transport (including oxygen) in general. Herein, we present a multi-scale analytical model of the porous anode catalyst layers and individual catalyst agglomerates that enables determination of the effects of electrode morphology such as agglomerate size, catalyst loading, etc. on H 2 transport resistance through the porous electrode to complement and better understand H 2 limiting current experiments and deconvolute local H 2 transport resistances.

Zhang, Rosa↗

Ninth International Workshop on Chiral Dynamics, 2018

The Ninth International Workshop on Chiral Dynamics (CD18) was hosted by the Triangle Universities Nuclear Laboratory (TUNL) and held on the campus of Duke University in Durham, NC. The workshop was from September 17 th to 21 st , 2018. This series of workshops, which started at MIT in 1994, brings together theorists and experimentalists every three years to discuss the status and challenges in the physics of low-energy quantum chromodynamics (QCD), Goldstone Boson dynamics, meson-baryon interactions, few-body physics, lattice QCD and Chiral Perturbation Theory. The last workshop was jointly hosted by the Department of Physics of the University of Pisa and the Pisa branch of the Istituto Nazionale di Fisica Nucleare in July 2015. Previous hosts of the workshop include MIT in 1994, the University of Mainz in 1997, Jefferson Lab in 2000 and 2012, the University of Bonn in 2003, TUNL and Duke University in 2006, and the University of Bern in 2009. Hosting this workshop is an important and substantial service to the international low-energy QCD physics community. Nearly 120 participants attended the workshop, which delivered twenty plenary talks, and over ninety parallel presentations. Proceedings of the workshop are published in Proceedings of Science at https://pos.sissa.it/317/. These proceedings present topics convened in this 9 th workshop and provide a comprehensive review of the field, highlighting recent accomplishments and discussing challenges that will motivate research in the coming years.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Preliminary Plan to Inform Testing of a Heat Exchanger Test Article

This report presents a preliminary plan to guide the qualification testing of advanced heat exchanger (HX) components for nuclear-to-industrial heat transfer applications. The objective is to establish a defensible, physics-based methodology that integrates computational modeling, targeted experimentation, and in-service inspection considerations to demonstrate component performance and reliability under representative reactor conditions. The analysis identifies Sodium-cooled Fast Reactor (SFR) and High-Temperature Gas-cooled Reactor (HTGR) systems as reference configurations in terms of temperature, pressure, and chemical environment. Within these operating envelopes, dominant degradation mechanisms— including creep–fatigue interaction, flow-induced vibration, corrosion, and diffusion-bond deterioration—were evaluated to define test requirements. A comprehensive computationalexperimental framework is proposed to support life prediction and qualification activities. The framework couples high-fidelity structural-mechanics, thermal-hydraulic, and fluid-structure interaction models with accelerated degradation testing to produce a traceable linkage between microstructural evolution, mechanical performance, and remaining useful life (RUL). The approach adheres to established Verification, Validation, and Uncertainty Quantification (VVUQ) standards (ASME V&V 10/20; NUREG-2152) and incorporates a digital-twin architecture for continuous model refinement through data assimilation. The plan further outlines testing methodologies, including pre-test analyses, test-loop design parameters, and sensor placement strategies that maximize information yield while maintaining mechanistic fidelity. Complementary sections describe in-service inspection (ISI), on-line monitoring (OLM), and structural-health-monitoring (SHM) techniques applicable to compact HX geometries typical of advanced reactors. Collectively, these activities establish the technical foundation for demonstrating 40-60-year equivalent service life of advanced heat exchangers in support of the U.S. Department of Energy’s Advanced Reactor and Integrated Energy Systems programs. The forthcoming phase will execute the defined pre-test analyses, initiate hardware fabrication, and implement the integrated testing campaign to validate the proposed qualification methodology.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Knowledge Transfer Program for International Nuclear Safeguards

Nuclear safeguards were first announced in 1945 by the U.S., Canadian and British governments as a means to exchange scientific information about peaceful uses of atomic energy and prevent the use of nuclear material for weapons. International nuclear safeguards, now under the provision of the International Atomic Energy Agency (IAEA), serves to hold accountable the 140 member countries (States) that have entered into treaties and agreements against the spread of nuclear weapons. Most notably, the IAEA acts as a nuclear materials inspectorate under the global Nuclear Non-Proliferation Treaty, brought about in 1968, that specifies commitments member States make to the world?s non-proliferation regime. The Office of International Nuclear Safeguards (OINS) is part of the National Nuclear Security Administration, a semi-autonomous agency within the U.S. Department of Energy. Within OINS, the Human Capital Development program recognizes the need to build workforce capacity and safeguards expertise. This includes supporting the education and training of younger generations working in international nuclear safeguards. One of the program?s main concerns is core competencies being lost to retirement or attrition and building knowledge retention pipelines from senior to new professionals. One identified core competency is knowledge gained by individuals who have completed IAEA assignments such as missions to member States to conduct safeguards inspections. Such individuals possess unique knowledge, and efforts are being put forth to effectively capture this knowledge within the national laboratories complex. To this end, we report findings from a one-year mentor-mentee knowledge retention program in which an international safeguards subject matter expert imparted knowledge and skills to a willing professional mentee. The knowledge and skills stem from the mentor?s multi-year assignment at the IAEA in Vienna, Austria.

98 - NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL↗

Data for Resilience and Reliability [Slides]

The Energy to Communities (E2C) peer-learning cohort program provides technical assistance to groups of 15 community entities around a common energy topic over the course of 6 months. Every month, participants join a virtual meeting where they hear from experts and exchange strategies and best practices with their peers. This cohort, "Planning for Major Energy Disruptions in the Southeast" focuses on strategies for entities in the Southeast to quickly recover from impacts to energy infrastructure caused by extreme events, such as severe weather and natural disasters. This presentation focuses on the data available related to energy disruptions. The workshop is on April 23, 2026.

24 POWER TRANSMISSION AND DISTRIBUTION↗

E2C Cohort on Major Energy Disruptions in the Southeast: Trade-Offs and Feasibility of Energy Sector Investment for Community Resilience [Slides]

The Energy to Communities (E2C) peer-learning cohort program provides technical assistance to groups of 15 community entities around a common energy topic over the course of 6 months. Every month, participants join a virtual meeting where they hear from experts and exchange strategies and best practices with their peers. This cohort, "Planning for Major Energy Disruptions in the Southeast" focuses on strategies for entities in the Southeast to quickly recover from impacts to energy infrastructure caused by extreme events, such as severe weather and natural disasters. This presentation focuses on the tradeoffs and relative costs of different strategies to improve outcomes from these extreme events. The workshop is on May 21, 2026.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Utilities' Role in Major Grid Disruptions [Slides]

The Energy to Communities (E2C) peer-learning cohort program provides technical assistance to groups of 15 community entities around a common energy topic over the course of 6 months. Every month, participants join a virtual meeting where they hear from experts and exchange strategies and best practices with their peers. This cohort, "Planning for Major Energy Disruptions in the Southeast" focuses on strategies for entities in the Southeast to quickly recover from impacts to energy infrastructure caused by extreme events, such as severe weather and natural disasters. This presentation focuses on the role of utilities in preparing for and responding to major energy disruptions. The workshop is on April 23, 2026.

24 POWER TRANSMISSION AND DISTRIBUTION↗