Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

The importance of temporal and spatial incoherence in quantitative interpretation of 4D-STEM

Recent developments in pixelated detectors, when combined with aberration correction of probe forming optics have greatly enhanced the field of scanning electron diffraction. Differential phase contrast is now routine and deep learning has been proposed as a method to extract maximum information from diffraction patterns. This study examines the effects of temporal and spatial incoherence on convergent beam electron diffraction patterns and demonstrates that simple center of mass measurements cannot be naively interpreted. The inclusion of incoherence in deep learning data sets is also discussed.

36 MATERIALS SCIENCE↗

Enhanced Functionality for Materials Analysis in the DTEM

The recent explosion in the use of pump–probe studies on picosecond and shorter timescales to investigate structural and electronic phase transitions and the dynamics of chemical reactions has been based largely on laser–induced reactions coupled with laser interrogation techniques, or on laser induced reactions coupled with synchrotron radiation interrogation techniques. Much less attention has been given to approaches based on laser–induced (or electron–beam–induced) reactions coupled with electron interrogation methods, despite the fact that electron sources are brighter, and their interactions with matter stronger (thereby giving higher signal levels). The use of electrons as temporal probes has great potential for the study of complex transient events not only because of the high temporal resolution attainable by ultrafast electron diffraction (UED) but also the potential for direct high spatial resolution imaging using dynamic transmission electron microscopy (DTEM). However, taking this potential for electron interrogation methods and turning it into a routine nanoscale characterization technique requires several key aspects of the instrumentation used for electron microscopy/diffraction to be optimized. In this work, several approaches to instrument optimization for DTEM and UED (to be performed in the same instrument) are being addressed.

99 GENERAL AND MISCELLANEOUS↗

In situ TEM observation of calcium silicate hydrate nanostructure at high temperatures

Fire poses a substantial threat to concrete structures because calcium silicate hydrate (C-S-H) is not thermally stable at high temperatures. Herein, in situ TEM at temperatures from 20 to 800 °C was conducted to study the thermal-induced structural changes in C-S-H. We captured C-S-H shrinks at an average rate of 0.02 μm{sup 2}/{sup o}C upon heating with three stages observed, including induction, constant, and rapid periods. Our observation revealed that an 800 nm pore could be healed during pore structure evolution owing to the reconstruction and deformation among C-S-H blocks. The Ca/Si ratio was dropped at higher temperatures because of the leakage of calcium ions from the C-S-H structure to form CaO precipitates. The temperature-driven phase transformation and degradation were also detected using electron diffraction that C-S-H was transformed into metastable calcium silicate minerals above 800 °C. This work provides insights into the nanoscale transformation of C-S-H at high temperatures.

36 MATERIALS SCIENCE↗

Monoclinically distorted perovskites, A{sub 2}ZnTiO{sub 6} (A=Pr, Gd): Rietveld refinement, and dielectric studies

Double perovskite related oxide A{sub 2}ZnTiO{sub 6}A=Pr, Gd were synthesized by the solid state reaction method at 1523 K. The structure and microstructure of the compounds were studied by X-ray, SAED and FESEM. Rietveld refinement of the powder X-ray analysis shows that the compounds crystallizes in monoclinic space group P2{sub 1}/n (a{sup +}b{sup −}b{sup −}) with unit cell parameter √2a{sub p}×√2a{sub p}×2a{sub p} (a=5.5026(1) Å, b=5.6305(1) Å, c=7.8149(1) Å, β=90.02(1)° for Pr{sub 2}ZnTiO{sub 6} and a=5.3621(1) Å, b=5.6565(2) Å, c=7.6779(2) Å and β=90.264(2)° for Gd{sub 2}ZnTiO{sub 6}. Electron diffraction study confirms P2{sub 1}/n symmetry of the oxides. The monoclinic distortion is larger in Gd{sub 2}ZnTiO{sub 6} than Pr{sub 2}ZnTiO{sub 6} which is associated with the tolerance factor and the tilting angle of ZnO{sub 6} and TiO{sub 6} octahedra (ϕ=13.64° for Pr{sub 2}ZnTiO{sub 6} and 16.51° for Gd{sub 2}ZnTiO{sub 6}). The compounds are highly ordered. The charge and size difference between B site cations are the driving force for the ordering of the B′O{sub 6} and B″O{sub 6} octahedra. Pr{sub 2}ZnTiO{sub 6} shows a dielectric constant of 27 and dielectric loss of 0.003 while Gd{sub 2}ZnTiO{sub 6} has a dielectric constant of 17 and dielectric loss of 0.005 measured at 1 MHz. - Graphical abstract: Synthesis of new double perovskite dielectric material with very low dielectric loss. - Highlights: • Synthesis of new monoclinically distorted double perovskite (Pr{sub 2}ZnTiO{sub 6}). • Synthesis of monoclinically distorted double perovskite (Gd{sub 2}ZnTiO{sub 6}). • Selected area electron diffraction study of A{sub 2}ZnTiO{sub 6} (A=Pr, Gd). • Study of dielectric properties of A{sub 2}ZnTiO{sub 6} (A=Pr, Gd)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultrafast relaxation of lattice distortion in two-dimensional perovskites

Direct visualization of ultrafast coupling between charge carriers and lattice degrees of freedom in photoexcited semiconductors has remained a long-standing challenge and is critical for understanding the light-induced physical behaviour of materials under extreme non-equilibrium conditions. Here we obtain a direct visualization of the structural dynamics in monocrystalline 2D perovskites. We achieve this by monitoring the evolution of wavevector-resolved ultrafast electron diffraction intensity following above-bandgap high-density photoexcitation. Our analysis reveals a light-induced ultrafast reduction in antiferro-distortion resulting from a strong interaction between the electron–hole plasma and perovskite lattice, which induces an in-plane octahedra rotation towards a more symmetric phase. Correlated ultrafast spectroscopy performed at the same carrier density as ultrafast electron diffraction reveals that the creation of a dense electron–hole plasma triggers the relaxation of lattice distortion at shorter timescales by modulating the crystal cohesive energy. Then we show that the interaction between carrier gas and lattice can be altered by tailoring the rigidity of the 2D perovskite by choosing an appropriate organic spacer layer.

36 MATERIALS SCIENCE↗

Cleaning of GaN(2110) surfaces

The cleaning of GaN(2110) surfaces was investigated by x-ray photoelectron spectroscopy, scanning tunneling microscopy, and low-energy electron diffraction. Two different two-step cleaning methods, performed under ultrahigh-vacuum conditions, were carried out and compared. The first cleaning step of both methods is thermal degassing. The second step is either the deposition of metallic gallium followed by redesorption or an exposure to active nitrogen from a radio frequency nitrogen plasma source. Upon storage in a glovebox (N{sub 2} atmosphere) and transfer to ultrahigh vacuum under dry nitrogen, carbon and oxygen were identified as the major contaminants. A significant decrease in oxygen and carbon was achieved by thermal degassing at 750 deg. C under ultrahigh-vacuum conditions. By applying a subsequent Ga deposition/redesorption or N{sub 2}-plasma cleaning step, a further reduction in oxygen and carbon could be achieved. In comparison, the Ga deposition/redesorption cleaning showed a better performance in oxygen removal, whereas the N{sub 2} plasma exhibits a better efficiency in carbon removal. Furthermore scanning tunneling microscopy and low-energy electron diffraction investigations showed a drastic improvement of the morphology and atomic structure of the clean surfaces in contrast to the sample surfaces after N{sub 2} storage and transfer.

36 MATERIALS SCIENCE↗

Accessing a growth window for SrVO{sub 3} thin films

Stoichiometric SrVO{sub 3} thin films were grown over a range of cation fluxes on (001) (La{sub 0.3}Sr{sub 0.7})(Al{sub 0.65}Ta{sub 0.35})O{sub 3} substrates using hybrid molecular beam epitaxy, where a thermal effusion cell was employed to generate a Sr flux and V was supplied using the metal-organic precursor vanadium oxytriisopropoxide (VTIP). By systematically varying the VTIP flux while keeping the Sr flux constant, a range of flux ratios were discovered in which the structural and electronic properties of the SrVO{sub 3} films remained unaltered. The intrinsic film lattice parameter and residual resistivity were found to be the smallest inside the growth window, indicating the lowest defect concentration of the films, and rapidly increased for cation flux ratios deviating from ideal growth condition. Reflection high-energy electron diffraction showed that films grown within this range had smooth surfaces and diffraction patterns were free of additional spots, while otherwise the growing surface was rough and contained additional crystalline phases. Results show the existence of a SrVO{sub 3} growth window at sufficiently high growth temperature, in which high-quality, stoichiometric films can be grown in a robust, highly reproducible manner that is invulnerable to unintentional flux variation.

36 MATERIALS SCIENCE↗

Direct and real time probe of photoinduced structure transition in colossal magnetoresistive material

Here, we report a direct and real time measurement of photoinduced structure phase transition in single crystal La 0.84 Sr 0.16 MnO 3 using femtosecond electron diffraction. The melting of orthorhombic lattice ordering under femtosecond optical excitation is found involving two distinct processes with different time scales, an initial fast melting of orthorhombic phase in about 4 ps and a subsequent slower transformation in 90 ps and longer timescales. Furthermore, the fast process is designated as the initial melting of orthorhombic phase induced by the Mn-O bond change that is most likely driven by the quenching of the dynamic Jahn-Teller distortion following the photo-excitation. We attribute the slow process to the growing of newly formed structure domain from the photo-excited sites to the neighboring non-excited orthorhombic sites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In Situ Transmission Electron Microscopy of High-Temperature Inconel-625 Corrosion by Molten Chloride Salts

This paper describes an approach to monitor high temperature molten chloride (MgCl 2 -NaCl-KCl) salt corrosion of Inconel-625 alloy in real time at high spatial resolution. The approach is based on a micro-environmental-cell assembly integrated into a transmission-electron-microscope goniometer to examine in situ the salt-alloy interface during corrosion, employing real time electron diffraction and imaging. It establishes procedures to minimize incorporation of H 2 O or O 2 from atmosphere in the chloride salts during sample fabrication and corrosion, which is critical to understanding the fundamental corrosion mechanisms. A clustering algorithm and a 2D Gaussian fit function are used to determine diffraction spot intensities in in situ diffraction patterns, to quantify alloy corrosion. This facilitates quantitative observation of the evolution of individual grains, in contrast to conventional macroscopic corrosion rate quantification. The isothermal corrosion rate of Inconel-625 in an anhydrous, unoxidized salt-stack is 220 ± 30 μm year -1 at 700 °C and 350 ± 20 μm year -1 at 800 °C. However, the corrosion rate at 700 °C increases five-fold to 1000 ± 170 μm year -1 when the salt stack is air-exposed, indicating the dominant effects of hydrated or oxidized impurities on corrosion acceleration. Furthermore, real time imaging of the microstructure evolution suggests that corrosion is initiated at grain boundaries.

14 SOLAR ENERGY↗

Transmission Kikuchi diffraction and transmission electron forescatter imaging of electropolished and FIB manufactured TEM specimens

We present a study of the efficiency of the utility of scanning electron microscope (SEM)-based transmission methods for characterizing grain structure in thinned bulk metals. Foils of type 316 stainless steel were prepared by two methods commonly used for transmission electron microscopy — double-jet electropolishing and focused ion beam milling. A customized holder allowed positioning of the foils in a configuration appropriate for both transmission electron forward scatter diffraction, and for transmission imaging by the use of a forescatter detector with two diodes. We found that both crystallographic orientation maps and dark-field transmitted images could be obtained for specimens prepared by either method. However, for both methods, preparation-induced artifacts may affect the quality or accuracy of transmission SEM data, especially those acquired by the use of transmission Kikuchi diffraction. Generally, the quality of orientation data was better for specimens prepared by electropolishing, due to the absence of ion-induced damage. - Highlights: • The transmission imaging and diffraction techniques are emerging in scanning electron microscopy (SEM) as promising new field of materials characterization. • The manuscript titled: “Transmission Kikuchi Diffraction and Transmission Electron Forescatter Imaging of Electropolished and FIB Manufactured TEM Specimens” documents how different specimen thinning procedures can effect efficiency of transmission Kikuchi diffraction and transmission electron forescatter imaging. • The abilities to make precision crystallographic orientation maps and dark-field images in transmission was studied on electropolished versus focus ion beam manufactured TEM specimens. • Depending on the need, electropolished and focused ion beam technique may produce suitable specimens for transmission imaging and diffraction in SEM.

36 MATERIALS SCIENCE↗

Correlated rattling-ion origins of dielectric properties in reentrant dipole glasses BaTiO{sub 3}-BiScO{sub 3}

The local structure of the pseudo-cubic solid solution 0.6BaTiO{sub 3}-0.4BiScO{sub 3}, which exhibits reentrant dipole-glass behavior, has been determined using the Reverse Monte Carlo method to simultaneously fit (1) neutron and X-ray total scattering data (including the corresponding real-space pair-distribution functions), (2) Bi and Sc extended X-ray absorption fine structure, and (3) patterns of diffuse scattering in electron diffraction. These structural refinements revealed the multi-site probability density distributions for both Bi (14-sites) and Ti (8 sites), whereas Ba and Sc featured normal unimodal distributions. Bi atoms are displaced along both the 〈111〉 and 〈100〉 directions, while Ti atoms are shifted along 〈111〉. Correlated dynamic hopping of Bi and Ti over their corresponding split sites combined with chemical disorder is proposed as the origin of the strong frequency dispersion observed in dielectric measurements. The existence of split sites also explains the reentrant dipole-glass behavior reported for this system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis, crystal structure and photoluminescence of (Ba{sub 0.99}Eu{sub 0.01})Al{sub 3}Si{sub 4}N{sub 9}

Crystalline grains of (Ba{sub 0.99}Eu{sub 0.01})Al{sub 3}Si{sub 4}N{sub 9} were obtained from samples synthesized by heating mixtures of binary nitride powders at 2000 °C and 0.85 MPa of N{sub 2} gas. The fundamental reflections of electron diffraction (ED) and X-ray diffraction (XRD) measured for some grains could be indexed with orthorhombic cell parameters: a=10.028(2) Å, b=53.353(9) Å, and c=5.9215(11) Å. Streaks and diffuse lines along the b axis were observed in the ED and XRD photographs, indicating stacking faults. A statistical average structure was analyzed using the intensity data of the fundamental reflections with the space group Fdd2. Local structure models were presented based on the average structure. Similar streaks and diffuse lines with fundamental reflections indexed with monoclinic cell parameters: a=5.8376(4) Å, b=26.6895(12) Å, c=5.8393(3) Å, and β=118.8428(15)° were also observed in the XRD oscillation photographs of another grain. The mixture of the grains having the orthorhombic and monoclinic fundamental structures emitted blue–green light with a peak wavelength of 500 nm and a full width at half-maximum (FWHM) of 65 nm under 400 nm excitation. The emission intensity measured at 300 °C was 67.5% of the intensity measured at 25 °C. A broad excitation band ranged from about 260 nm to 475 nm with maximum intensity at around 290 nm, and 60% of the intensity was obtained by excitation at 400 nm. - Graphical abstract: Crystalline grains of (Ba{sub 0.99}Eu{sub 0.01})Al{sub 3}Si{sub 4}N{sub 9}, having orthorhombic and monoclinic fundamental structures and stacking faults, were obtained from samples synthesized at 2000 °C and 0.85 MPa of N{sub 2}. The grains emitted blue–green light with a peak wavelength of 500 nm and a full width at half-maximum (FWHM) of 65 nm under 400 nm excitation. The emission intensity measured at 300 °C was 67.5% of the intensity measured at 25 °C. - Highlights: • (Ba{sub 0.99}Eu{sub 0.01})Al{sub 3}Si{sub 4}N{sub 9} was synthesized at 2000 °C and 0.85 MPa of N{sub 2}. • Stacking faults of the crystal structure were shown by X-ray and electron diffraction. • Orthorhombic and monoclinic statistical average-structure models were presented. • Photoluminescence excitation and emission spectra were measured. • Thermal quenching of the emission intensities was characterized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exploring the Magnetoelectric Coupling at the Composite Interfaces of FE/FM/FE Heterostructures

Multiferroic materials have attracted considerable attention as possible candidates for a wide variety of future microelectronic and memory devices, although robust magnetoelectric (ME) coupling between electric and magnetic orders at room temperature still remains difficult to achieve. In order to obtain robust ME coupling at room temperature, we studied the Pb(Fe0.5Nb0.5)O3/Ni0.65Zn0.35Fe2O4/ Pb(Fe0.5Nb0.5)O3 (PFN/NZFO/PFN) trilayer structure as a representative FE/FM/FE system. We report the ferroelectric, magnetic and ME properties of PFN/NZFO/PFN trilayer nanoscale heterostructure having dimensions 70/20/70nm, at room temperature. The presence of only (00l) refection of PFN and NZFO in the X-ray diffraction (XRD) patterns and electron diffraction patterns in Transmission Electron Microscopy (TEM) confirm the epitaxial growth of multilayer heterostructure. The distribution of the ferroelectric loop area in a wide area has been studied, suggesting that spatial variability of ferroelectric switching behavior is low, and film growth is of high quality. The ferroelectric and magnetic phase transitions of these heterostructures have been found at ~575K and ~650K, respectively which are well above room temperature. These nanostructures exhibit low loss tangent, large saturation polarization (Ps ~ 38µC/cm2) and magnetization (Ms ~ 48emu/cm3) with strong ME coupling at room temperature revealing them as potential candidates for nanoscale multifunctional and spintronics device applications.

36 MATERIALS SCIENCE↗

The characterization of secondary electron emitters for use in large area photo-detectors.

The Large-Area Picosecond Photo-Detector Project is focused on the development of large-area systems to measure the time-of-arrival of relativistic particles with, ultimately, 1 pico-second resolution, and for signals typical of Positron-Emission Tomography (PET), a resolution of about 30 pico-seconds. Our contribution to this project is to help with identification and efficient fabrication of novel electron emitting materials with properties optimized for use in such detectors. We have assembled several techniques into a single ultra-high vacuum apparatus in order to enable characterization of both photocathode and secondary electron emission (SEE) materials. This apparatus will examine how photocathode quantum efficiency and SEE material electron yield correlate to surface chemical composition, state, and band structure. The techniques employed in this undertaking are X-ray photoelectron spectroscopy (XPS) for surface chemical composition, ultraviolet photoelectron spectroscopy (UPS) for the determination of band structure and surface work function, as well surface cleaning techniques such as argon-ion sputtering. To determine secondary electron emission yields and quantum efficiencies of detector materials, we use electron optics from a low energy electron diffraction (LEED) system whose set of hemispherical electrodes allows for efficient collection of secondary and photo electrons. As we gain a stronger insight into the details of mechanisms of electron emission from photocathodes and SEE materials, we will be able to lay a foundation for the larger collaborative effort to design the next generation of large-area photo-detectors. We present our preliminary results on the SEE materials from our as-yet completed characterization system.

43 PARTICLE ACCELERATORS↗

Beyond a phenomenological description of magnetostriction

Magnetostriction, the strain induced by a change in magnetization, is a universal effect in magnetic materials. Owing to the difficulty in unraveling its microscopic origin, it has been largely treated phenomenologically. Here in this paper, we show how the source of magnetostriction—the underlying magnetoelastic stress—can be separated in the time domain, opening the door for an atomistic understanding. X-ray and electron diffraction are used to separate the sub-picosecond spin and lattice responses of FePt nanoparticles. Following excitation with a 50-fs laser pulse, time-resolved X-ray diffraction demonstrates that magnetic order is lost within the nanoparticles with a time constant of 146 fs. Ultrafast electron diffraction reveals that this demagnetization is followed by an anisotropic, three-dimensional lattice motion. Analysis of the size, speed, and symmetry of the lattice motion, together with ab initio calculations accounting for the stresses due to electrons and phonons, allow us to reveal the magnetoelastic stress generated by demagnetization.

36 MATERIALS SCIENCE↗

Room-temperature ferromagnetism of Fe-doped TiO{sub 2} nanoparticles driven by oxygen vacancy

Graphical abstract: A series of Ti{sub 1−x}Fe{sub x}O{sub 2−δ} (x ≤ 0.03) nanoparticles (NPs) were synthesized by sol–gel route. The room temperature ferromagnetism (RTFM) has been explained in terms of vacancy induced bound magnetic polaron (BMP) model, where the Fe{sup 3+} ions ferromagnetically coupled mediated by oxygen vacancies. Display Omitted Highlights: ► The Fe-doped NPs have been synthesized by sol–gel method. ► Ferromagnetism of Fe-doped TiO{sub 2} NPs are intrinsic property. ► Room temperature ferromagnetism observed in all the Fe-doped samples. ► Variation in M{sub s} is attributed due to oxygen vacancies and defect formation. -- Abstract: A series of Ti{sub 1−x}Fe{sub x}O{sub 2−δ} (0 ≤ x ≤ 0.03) nanoparticles (NPs) were synthesized by sol–gel route. The NPs had a size distribution in the range of 15–40 nm and were identified as the anatase TiO{sub 2} by X-ray diffraction (XRD) and Raman analysis. XRD, selected area electron diffraction, Raman and Mössbauer analysis ruled out the signature of Fe-cluster or any other oxides of Fe. The redshifting of the band edge emission peak observed in UV–vis absorption studies further confirmed the doping of Fe ions in the TiO{sub 2} lattice. Raman studies show the shifting and broadening in E{sub g}(1) and E{sub g}(3) modes with Fe doping. It suggested that the activation of ferromagnetism with increasing Fe doping concentration was related to the oxygen vacancy defects. The presence of such defects was further confirmed from electron paramagnetic resonance (EPR) measurements. The observed ferromagnetism is interpreted in terms of bound magnetic polaron (BMP) model.

36 MATERIALS SCIENCE↗

Facility for low-temperature spin-polarized-scanning tunneling microscopy studies of magnetic/spintronic materials prepared in situ by nitride molecular beam epitaxy

Based on the interest in, as well as exciting outlook for, nitride semiconductor based structures with regard to electronic, optoelectronic, and spintronic applications, it is compelling to investigate these systems using the powerful technique of spin-polarized scanning tunneling microscopy (STM), a technique capable of achieving magnetic resolution down to the atomic scale. However, the delicate surfaces of these materials are easily corrupted by in-air transfers, making it unfeasible to study them in stand-alone ultra-high vacuum STM facilities. Therefore, we have carried out the development of a hybrid system including a nitrogen plasma assisted molecular beam epitaxy/pulsed laser epitaxy facility for sample growth combined with a low-temperature, spin-polarized scanning tunneling microscope system. The custom-designed molecular beam epitaxy growth system supports up to eight sources, including up to seven effusion cells plus a radio frequency nitrogen plasma source, for epitaxially growing a variety of materials, such as nitride semiconductors, magnetic materials, and their hetero-structures, and also incorporating in situ reflection high energy electron diffraction. The growth system also enables integration of pulsed laser epitaxy. The STM unit has a modular design, consisting of an upper body and a lower body. The upper body contains the coarse approach mechanism and the scanner unit, while the lower body accepts molecular beam epitaxy grown samples using compression springs and sample skis. The design of the system employs two stages of vibration isolation as well as a layer of acoustic noise isolation in order to reduce noise during STM measurements. This isolation allows the system to effectively acquire STM data in a typical lab space, which during its construction had no special and highly costly elements included, (such as isolated slabs) which would lower the environmental noise. The design further enables tip exchange and tip coating without breaking vacuum, and convenient visual access to the sample and tip inside a superconducting magnet cryostat. A sample/tip handling system is optimized for both the molecular beam epitaxy growth system and the scanning tunneling microscope system. The sample/tip handing system enables in situ STM studies on epitaxially grown samples, and tip exchange in the superconducting magnet cryostat. The hybrid molecular beam epitaxy and low temperature scanning tunneling microscopy system is capable of growing semiconductor-based hetero-structures with controlled accuracy down to a single atomic-layer and imaging them down to atomic resolution.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

GaN Schottky diodes with single-crystal aluminum barriers grown by plasma-assisted molecular beam epitaxy

GaN-based Schottky barrier diodes (SBDs) with single-crystal Al barriers grown by plasma-assisted molecular beam epitaxy are fabricated. Examined using in-situ reflection high-energy electron diffractions, ex-situ high-resolution x-ray diffractions, and high-resolution transmission electron microscopy, it is determined that epitaxial Al grows with its [111] axis coincident with the [0001] axis of the GaN substrate without rotation. In fabricated SBDs, a 0.2 V barrier height enhancement and 2 orders of magnitude reduction in leakage current are observed in single crystal Al/GaN SBDs compared to conventional thermal deposited Al/GaN SBDs. The strain induced piezoelectric field is determined to be the major source of the observed device performance enhancements.

36 MATERIALS SCIENCE↗