Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELASTIC PROPERTY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Pressure calibration to 20 GPa by simultaneous use of ultrasonic and x ray techniques

Simultaneous measurements of elastic P- and S-wave travel times, density (specific volume), and sample length using a multianvil apparatus interfaced with ultrasonic interferometry and x-ray diffraction and radiography have enabled simultaneous determination of elastic properties and absolute pressure at high pressures and high temperatures. Experimental procedures and data analyses are demonstrated using data collected on polycrystalline samples of ferropericalse (MgFe) and wadsleyite Mg{sub 2}SiO{sub 4} under quasihydrostatic conditions up to 20 GPa. Compared with those derived from the internal pressure standard in the same experiments based on equations of state of NaCl, the directly determined pressure at 20 GPa is {approx}8% and {approx}12% higher than those inferred from the Brown and Decker pressure scales, respectively. The discrepancy cannot be reconciled by uncertainties in the NaCl pressure scale and current experimental data. Until further results are available, the pressure determined in this study is believed to be a more accurate measurement of the effective pressure imposed on the sample than that inferred from NaCl based on previous pressure scales.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Characteristics of a Laser Resonant Ultrasonic Spectroscopy System for Measuring the Elastic Constants of Materials

Resonant ultrasound spectroscopy (RUS) is a useful technique for measuring the elastic properties of materials. In this study, two experimental approaches for performing RUS are experimentally analyzed and compared: 1) contact transduction using piezoelectric transducers (PZT) and 2) laser transduction using pulse laser excitation and laser interferometric detection. A single Zircaloy sample cut from a nuclear pressure tube was used for this study. By virtue of the non-contact nature, the quality factor, Q, for laser RUS is shown to be higher than the contact RUS. In addition, the probe beam for laser-RUS can be scanned to form a 2D image of each vibrational mode, which in turn enables unique mode identification. These defining characteristics of laser-RUS enable straightforward discrimination of closely spaced resonant modes and provide key advantages for improving the resolution of resonant ultrasound spectroscopy.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Anomalous Sound Velocities of Antigorite at High Pressure and Implications for Detecting Serpentinization at Mantle Wedges

Elastic properties of antigorite are important for interpretation of seismic mapping of serpentinization in the mantle wedge above subducting slabs. The compressional (V P ) and shear (V S ) wave velocities in pure antigorite aggregates were measured simultaneously up to 8.4 GPa by ultrasonic interferometry. We found that V P increases monotonically with pressure while V S increases with pressure up to about 3 GPa but undergoes a negative pressure dependence above 4 GPa. Compared to other mantle minerals, antigorite exhibits significantly lower P and S wave velocities as well as a higher V P /V S ratio at upper mantle pressures. We modeled velocity reductions manifesting through the formation of antigorite in mantle peridotite and provide compelling evidence that seismic anomalies with low-velocity and high V P /V S ratios is caused by varying degrees of serpentinization in subduction zones.

58 GEOSCIENCES↗

Structural, electronic, elastic and magnetic properties of RuFe{sub 3}N and OsFe{sub 3}N: A first principle study

The structural, electronic, elastic and magnetic properties of the perovskite structure of RuFe{sub 3}N, and OsFe{sub 3}N have been reported using the VASP within the gradient generalized approximation. Total energy calculations are performed using both spin and non-spin polarized calculations and it is found that, at ambient pressure both RuFe{sub 3}N and OsFe{sub 3}N are stable in ferromagnetic phase. The electronic structure reveals that both RuFe{sub 3}N and OsFe{sub 3}N are metallic in nature at ambient pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phonon focusing and electron–phonon drag in semiconductor crystals with degenerate charge-carrier statistics

We study the effect of anisotropy in elastic properties on the electron–phonon drag and thermoelectric phenomena in gapless semiconductors with degenerate charge-carrier statistics. It is shown that phonon focusing leads to a number of new effects in the drag thermopower at low temperatures, when diffusive phonon scattering from the boundaries is the predominant relaxation mechanism. We analyze the effect of phonon focusing on the dependences of the thermoelectromotive force (thermopower) in HgSe:Fe crystals on geometric parameters and the heat-flow directions relative to the crystal axes in the Knudsen regime of the phonon gas flow. The crystallographic directions that ensure the maximum and minimum values of the thermopower are determined and the role of quasi-longitudinal and quasi-transverse phonons in the drag thermopower in HgSe:Fe crystals at low temperatures is analyzed. It is shown that the main contribution to the drag thermopower comes from slow quasi-transverse phonons in the directions of focusing in long samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Equations of state of ice VI and ice VII at high pressure and high temperature

High-pressure H{sub 2}O polymorphs among which ice VI and ice VII are abundant in the interiors of large icy satellites and exo-planets. Knowledge of the elastic properties of these pure H{sub 2}O ices at high-temperature and high-pressure is thus crucial to decipher the internal structure of icy bodies. In this study we assess for the first time the pressure-volume-temperature (PVT) relations of both polycrystalline pure ice VI and ice VII at high pressures and temperatures from 1 to 9 GPa and 300 to 450 K, respectively, by using in situ synchrotron X-ray diffraction. The PVT data are adjusted to a second-order Birch-Murnaghan equation of state and give V{sub 0} = 14.17(2) cm{sup 3} mol{sup −1}, K{sub 0} = 14.05(23) GPa, and α{sub 0} = 14.6(14) × 10{sup −5} K{sup −1} for ice VI and V{sub 0} = 12.49(1) cm{sup 3} mol{sup −1}, K{sub 0} = 20.15(16) GPa, and α{sub 0} = 11.6(5) × 10{sup −5} K{sup −1} for ice VII.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Hydration on the Single-crystal Elasticity of Fe-bearing Wadsleyite to 12 GPa

The single-crystal elastic properties of Fe-bearing wadsleyite with 1.93 wt% H{sub 2}O (Mg{sub 1.634}Fe{sub 0.202}H{sub 0.305}SiO{sub 4}) have been determined by Brillouin scattering. At ambient conditions, the aggregate bulk and shear moduli (K{sub S0}, G{sub 0}) of this wadsleyite are 156.2(5) and 98.0(3) GPa, respectively. Compared to the corresponding anhydrous wadsleyite, 1.93 wt% H{sub 2}O lowers K{sub S0} and G{sub 0} by 8.1% and 9.3%, respectively. High-pressure measurements up to 12 GPa show that the pressure derivative of the bulk modulus, K'{sub S0} = 4.8(1), is similar to that of the anhydrous Fe-wadsleyite with reported values of 4.6-4.74, but the addition of H{sub 2}O increases the pressure derivative of the shear modulus, G{sub 0}' from 1.5(1) to 1.9(1). This contrasts with the G{sub 0}' of Fe-free wadsleyite, which is the same within uncertainty for the hydrous and anhydrous phases. As a result, both the compressional- and shear-wave velocities (v{sub P}, v{sub S}) of hydrous Fe-bearing wadsleyite are about 200({+-}24) m/s slower than anhydrous Fe-bearing wadsleyite at transition zone pressures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Assessment of impact damage of composite rocket motor cases

This contract reviewed the available literature on mechanisms of low velocity impact damage in filament wound rocket motor cases, MDE methods to quantify damage, critical coupon level test methods, manufacturing and material process variables and empirical and analytical modeling off impact damage. The critical design properties for rocket motor cases are biaxial hoop and axial tensile strength. Low velocity impact damage is insidious because it can create serious nonvisible damage at very low impact velocities. In thick rocket motor cases the prevalent low velocity impact damage is fiber fracture and matrix cracking adjacent to the front face. In contrast, low velocity loading of thin wall cylinders induces flexure, depending on span length and the flexure induces delamination and tensile cracking on the back face wall opposed to impact occurs due to flexural stresses imposed by impact loading. Important NDE methods for rocket motor cases are non-contacting methods that allow inspection from one side. Among these are vibrothermography, and pulse-echo methods based on acoustic-ultrasonic methods. High resolution techniques such as x-ray computed tomography appear to have merit for accurate geometrical characterization of local damage to support development of analytical models of micromechanics. The challenge of coupon level testing is to reproduce the biaxial stress state that the full scale article experiences, and to determine how to scale the composite structure to model full sized behavior. Biaxial tensile testing has been performed by uniaxially tensile loading internally pressurized cylinders. This is experimentally difficult due to gripping problems and pressure containment. Much prior work focused on uniaxial tensile testing of model filament wound cylinders. Interpretation of the results of some studies is complicated by the fact that the fabrication process did not duplicate full scale manufacturing. It is difficult to scale results from testing subscale cylinders since there are significant differences in out time of the resins relative to full scale cylinder fabrication, differences in hoop fiber tensioning and unsatisfactory coupon configurations. It appears that development of a new test method for subscale cylinders is merited. Damage tolerance may be improved by material optimization that uses fiber treatments and matrix modifications to control the fiber matrix interface bonding. It is difficult to develop process optimization in subscale cylinders without also modeling the longer out times resins experience in full scale testing. A major breakthrough in characterizing the effect of impact damage on residual strength, and understanding how to scale results of subscale evaluations, will be a sound micromechanical model that described progressive failure of the composite. Such models will utilize a three dimensional stress analysis due to the complex nature of low velocity impact stresses in thick composites. When these models are coupled with non-contact NDE methods that geometrically characterize the damage and acoustic methods that characterize the effective local elastic properties, accurate assessment of residual strength from impact damage may be possible. Directions for further development are suggested.

Paris, Henry G.↗

Measurement of local internal friction in metallic glasses

Atomic force acoustic microscopy (AFAM), an advanced scanning probe microscopy technique, has been used to measure local elastic properties with a spatial resolution given by the tip-sample contact radius. AFAM is based on inducing out-of-plane vibrations in the specimen. The vibrations are sensed by the AFM cantilever from by the photodiode signal when its tip is in contact with the material under test. To measure local damping, the inverse quality factor Q{sup −1} of the resonance curve is usually evaluated. Here, from the contact-resonance spectra obtained, we determine the real and imaginary part of the contact stiffness k* and from these two quantities the local damping factor Q{sub loc}{sup −1} is obtained which is proportional to the imaginary part γ of the contact stiffness. The evaluation of the data is based on the cantilever's mass distribution with damped flexural modes and not on an effective point-mass approximation for the cantilever’s motion. The given equation is simple to use and has been employed to study the local Q{sub loc}{sup −1} of amorphous PdCuSi metallic glass and its crystalline counterpart as a function of position of the AFM tip on the surface. The width of the distribution changes dramatically from the amorphous to the crystalline state as expected from the consequences of the potential-energy landscape picture. The center value of the distribution curve for Q{sub loc}{sup −1} coincides very well with published data, based on global ultrasonic or internal friction measurements. This is compared to Q{sub loc}{sup −1} measured in crystalline SrTiO{sub 3}, which exhibits a narrow distribution, as expected.

36 MATERIALS SCIENCE↗

Single-crystal equations of state of magnesiowüstite at high pressures

Solid solutions of (Mg,Fe)O with high iron enrichment may be an important component of ultralow-velocity zones at Earth’s core-mantle boundary. However, to date there have been few high-precision studies on the elastic properties of these materials. In this study we present results on the compression of (Mg 0.22 Fe 0.78 )O magnesiowüstite in both neon and helium pressure media using single-crystal diffraction to ~55 GPa. In addition, our sample was characterized by time-domain synchrotron Mössbauer spectroscopy at ambient pressure using an extended time range that resulted in vastly improved energy resolution. The combination of these high-resolution techniques tightly constrains the presence of a defect-structure component at room pressure due to 4.7 mol% tetrahedrally-coordinated ferric iron, resulting in a renormalized composition of (Mg 0.215 Fe 0.762 ⟂ 0.023 )O. Both high-pressure diffraction datasets are well described by a 3rd-order Birch-Murnaghan equation of state. The best fit-parameters for a crystal with cubic structure in helium are K 0T = 148(3) GPa, K' 0T = 4.09(12), and V 0 = 78.87(6) Å 3 . Increasing differential stress in the neon-containing sample chamber was correlated with increasing apparent distortion of the initially cubic unit cell, requiring a lower-symmetry hexagonal cell to fit the data above ~20 GPa. For fit equations of state, we determine the pressure-dependent correlation ellipses for the equation of state parameters and compare with previously published single-crystal diffraction data from (Mg,Fe)O crystals in a helium medium. We make two main observations from the datasets using a helium pressure medium: K 0T decreases as a function of increasing iron content from periclase to wüstite and K' 0T is consistent with an approximately constant value of 4.0 that is independent of iron content, at least up to (Mg,Fe)O containing ~78 mol% FeO. Finally, in combination with previously reported thermal parameters, we compute the density of Mw78 at core-mantle boundary conditions and discuss the implications.

58 GEOSCIENCES↗

Evolution of elastic and thermal properties of cementitious composites containing micro-size lightweight fillers after exposure to elevated temperature

This work studies the evolution of elastic and thermal properties of cementitious composites containing micro-size lightweight fillers after exposure to elevated temperatures (up to 800 °C). A multiscale investigation is carried out to study the thermal degradation of cementitious composite materials at multiple scale levels: at cement past level, the dehydration kinetics of cement hydrates (i.e., C–S–H, CH and aluminate hydrates) and development of microcracks are studied as functions of exposure temperatures. The damage mechanism of the inclusion phases and damages within the interfacial transition zone (ITZ) under elevated temperature are also investigated. In addition, the change of mechanical (i.e., elastic moduli, compressive strengths) and thermal (thermal conductivities) properties are measured as functions of the exposure temperature. Based on the experimental studies, a multiscale thermal degradation model is developed where the thermal degradations of cement paste (including water composition, porosity, and solid phase changes), inclusion phases, and the interfaces are captured through a multiscale sub-stepping homogenization scheme. The thermal degradation model is validated through multiple sets of experimental data. Finally, the influence of key parameters including the particle size distribution of the inclusions, the chemical composition, as well as the effects of ITZ damage are studied.

36 MATERIALS SCIENCE↗

First-Principle Calculations of Structural, Elastic, and Electronic Properties of Intermetallic Rare Earth R{sub 2}Ni{sub 2}Pb (R = Ho, Lu, and Sm) Compounds

The structural, elastic, and electronic properties of rare earth intermetallic R{sub 2}Ni{sub 2}Pb (where R = Ho, Lu, and Sm) compounds were investigated with the density functional theory (DFT) calculations. The calculations are performed using the full potential-linearized augmented plane wave (FP-LAPW) method within the framework of local density approximation (LDA). The calculated values of the equilibrium lattice constants were in agreement with the available experimental values. The elastic constants (C{sub ij}) were also calculated to understand the mechanical properties and structural stability of the compounds. Furthermore, the density of states and the charge density distributions of the compounds were calculated to understand the nature of the bonding in the material. The calculated results are in accordance with the available data in the literature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Anomalies in the Elastic and Inelastic Properties of Co{sub x}(PZT){sub 100 –x} Nanocomposites

The elastic (G) and inelastic (Q{sup –1}) properties of Co{sub x}(PZT){sub 100 –x} nanocomposites (x = 23–76 at %) obtained by ion-beam sputtering have been studied in the temperature range 200–900 K. Internal friction peaks associated with Co atom hopping inside metallic granules have been discovered at 236 K. It has been found that the peak height grows with metallic phase concentration. Above 750 K, curve Q{sup –1}(T) rises considerably because of vacancy diffusion in Co granules under conditions of confined space.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Molecular dynamics simulation of the structural, elastic, and thermal properties of pyrochlores

We present a comprehensive simulation study of the effect of composition on the structural, elastic and thermal properties of 25 different compounds from the pyrochlore family. We joined a repulsive potential to an existing interatomic potential to enable molecular dynamics simulations of conditions away from equilibrium. We systematically varied the chemistry of the pyrochlore by substituting different cations in the A and B sites of the A2B2O7 formula unit. The A cations varied from Lu3+ to La3+, and the B cations from Ti4+ to Ce4+. The lattice parameter increased steadily with increasing the radius of A or B cations, but the bulk modulus showed a decreasing trend with increasing cation radius. However, the specific heat capacity and thermal expansion coefficient remained almost unchanged with increasing the radii of A and B cations. It is of interest to note that Ce on the B site significantly reduces the specific heat capacity and thermal expansion coefficient, which could have implications for annealing of radiation damage in cerate pyrochlores. The present results are consistent with the experimental measurements, which validates these potentials for simulation of dynamical processes, such as radiation damage, in pyrochlores.

computer simulation↗

Ultrasonic Acoustic Velocities During Partial Melting of a Mantle Peridotite KLB-1

Knowledge of the elastic properties of partially molten rocks is crucial for understanding low-velocity regions in the interior of the Earth. Models of fluid and solid mixtures have demonstrated that significant decreases in seismic velocity are possible with small amounts of melt, but there is very little available data for testing these models, particularly with both P and S waves for mantle compositions. We report ultrasonic measurements of P and S velocities on a partially molten KLB-1 sample at mantle conditions using a multi-anvil device at a synchrotron facility. The P, S, and bulk sound velocities decrease as melting occurs. We find that the quantity, ∂lnV S /∂lnV B (where V B is the bulk sound velocity) is lower than mechanical models estimate. Instead, our data, as well as previous data in the literature, are consistent with a dynamic melting model in which melting and solidification interact with the stress field of the acoustic wave.

58 GEOSCIENCES↗

Three-Dimensional Reconstruction and Microstructure Modeling of Porosity-Graded Cathode Using Focused Ion Beam and Homogenization Techniques

In this study, microstructure of a porosity-graded lanthanum strontium manganite (LSM) cathode of solid oxide fuel cells (SOFCs) has been characterized using focused ion beam (FIB) and scanning electron microscopy(SEM) combined with image processing. Two-point correlation functions of the two-dimensional (2D) images taken along the direction of porosity gradient are used to reconstruct a three-dimensional (3D) microstructure. The effective elastic modulus of the two-phase porosity-graded cathode is predicted using strong contrast (SC) and composite inclusion (CI) homogenization techniques. The effectiveness of the two methods in predicting the effective elastic properties of the porositygraded LSM cathode is investigated in comparison with the results obtained from the finite element model (FEM).

25 ENERGY STORAGE↗

Modeling of CO 2 sequestration in coal seams: Role of CO 2 -induced coal softening on injectivity, storage efficiency and caprock deformation: Original Research Article: Modeling of CO 2 sequestration in coal seams

An effective and safe operation for sequestration of CO 2 in coal seams requires a clear understanding of injection-induced coupled hydromechanical processes such as the evolution of pore pressure, permeability, and induced caprock deformation. In this study, CO 2 injection into coal seams was studied using a coupled flow-deformation model with a new stress-dependent porosity and permeability model that considers CO 2 -induced coal softening. Based on triaxial compression tests of coal samples extracted from the site of the first series of enhanced coalbed methane field tests in China, a softening phenomenon that a substantial (one-order-of-magnitude) decrease of Young's modulus and an increase of Poisson's ratio with adsorbed CO 2 content was observed. Such softening was considered in the numerical simulation through an exponential relation between elastic properties (Young's modulus and Poisson's ratio) and CO 2 pressure considering that CO 2 content is proportional to the CO 2 pressure. Our results of the numerical simulation show that the softening of the coal strongly affects the CO 2 sequestration performance, first by impeding injectivity and stored volume (cumulative injection) during the first week of injection, and thereafter by softening mediated rebound in permeability that tends to increase injectivity and storage over the longer term. A sensitivity study shows that stronger CO 2 -induced coal softening and higher CO 2 injection pressure contribute synergistically to increase a significant increase of CO 2 injectivity and adsorption, but also result in larger caprock deformations and uplift. This study demonstrates the importance of considering the CO 2 -induced softening when analyzing the performance and environmental impact of CO 2 -sequestration operations in unminable coal seams.

54 ENVIRONMENTAL SCIENCES↗

Cell alignment by smectic liquid crystal elastomer coatings with nanogrooves

Control of cells behavior through topography of substrates is a vital theme in biomedical applications. Among many materials used as substrates, polymers show advantages since they can be tailored by chemical functionalization. Fabrication of polymer substrates with nano- and microscale topography requires processing by lithography, microprinting, etching, etc. In this work, we present a different approach based on anisotropic elastic properties of polymerized smectic A (SmA) liquid crystal elastomer (LCE). When the SmA liquid crystal coating is deposited onto a substrate with planar alignment of the molecules, it develops nanogrooves at its free surface. After photopolymerization, these nanogrooves show an excellent ability to align human dermal fibroblasts (hDFs) over large areas. The alignment quality is good for both bare SmA LCE substrates and for substrates coated with fibronectin. The SmA LCE nano-topographies show a high potential for tissue engineering.

36 MATERIALS SCIENCE↗