Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Disks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Radiation Pressure-Driven Magnetic Disk Winds in Broad Absorption Line Quasi-Stellar Objects

We explore a model in which QSO broad absorption lines (BALS) are formed in a radiation pressure-driven wind emerging from a magnetized accretion disk. The magnetic field threading the disk material is dragged by the flow and is compressed by the radiation pressure until it is dynamically important and strong enough to contribute to the confinement of the BAL clouds. We construct a simple self-similar model for such radiatively driven magnetized disk winds, in order to explore their properties. It is found that solutions exist for which the entire magnetized flow is confined to a thin wedge over the surface of the disk. For reasonable values of the mass-loss rate, a typical magnetic field strength such that the magnetic pressure is comparable to the inferred gas pressure in BAL clouds, and a moderate amount of internal soft X-ray absorption, we find that the opening angle of the flow is approximately 0.1 rad, in good agreement with the observed covering factor of the broad absorption line region.

DeKool, Martin↗
NASA NTRS1995

Disk-Corona Model of Active Galactic Nuclei with Nonthermal Pairs

As a promising model for the X-ray emission from radio-quiet quasars and Seyfert 1 nuclei, we present a nonthermal disk-corona model, where soft photons from a disk are Comptonized by the nonthermal electron-positron pairs in a coronal region above the disk. Various characteristics of our model are qualitatively similar to the homogeneous, spherical, nonthermal pair models previously studied, but the important difference is that in our disk-corona model gamma-ray depletion is far more efficient, and, moreover, the gamma-ray annihilation line is much less prominent. Consequently, this model naturally satisfies the observed constraints on active galactic nuclei.

Tsuruta, Sachiko↗
NASA NTRS1997

The Origin of Warped, Precessing Accretion Disks in X-ray Binaries

The radiation-driven warping instability discovered by Pringle holds considerable promise as the mechanism responsible for producing warped, precessing accretion disks in X-ray binaries. This instability is an inherently global mode of the disk, thereby avoiding the difficulties with earlier models for the precession. Here we follow up on earlier work to study the linear behavior of the instability in the specific context of a binary system. We treat the influence of the companion as an orbit-averaged quadrupole torque on the disk. The presence of this external torque allows the existence of solutions in which the direction of precession of the warp is retrograde with respect to disk rotation, in addition to the prograde solutions that exist in the absence of external torques.

Maloney, Philip R.↗
NASA NTRS1997

Advection in Accretion Disk Boundary Layers

Recent numerical simulations of accretion disk boundary layers have shown qualitatively the importance tance of advected energy in the inner region of the disk. In this short paper we present quantitative results of advective boundary layers in the optically thick regime. Numerical results are obtained for various systems, by means of a one-dimensional time-dependent numerical code. At high accretion mass rates, dot-M approx. = 10(exp -4) solar mass/yr, or low values of the viscosity parameter, alpha approx. = 0.001-0.01 (characteristic of FU Orionis systems and some symbiotic stars), the optical thickness in the inner part of the disk becomes very large (tau much greater than 1). The disk, unable to cool efficiently, becomes geometrically thick (H/r approx. = 0.5). The energy dissipated in the dynamical boundary layer is radiated outward to larger radii and advected into the star. The boundary-layer luminosity is only a fraction of its expected value; the rest of the energy is advected into the star. The fraction of the advected energy is zeta = L(sub adv)/L(sub acc) approx. = 0.1 in symbiotic stars (accretion onto a low-mass main-sequence star) and zeta approx. = 0.2 in FU Ori systems (accretion onto a pre-main sequence star).

Godon, Patrick↗
NASA NTRS1998

Magnetohydrodynamic Origin of Jets from Accretion Disks

A review is made of magnetohydrodynamic (MHD) theory and simulation of outflows from disks for different distributions of magnetic field threading the disk. In one limit of a relatively weak, initially diverging magnetic field, both thermal and magnetic pressure gradients act to drive matter to an outflow, while a toroidal magnetic field develops which strongly collimates the outflow. The collimation greatly reduces the field divergence and the mass outflow rate decreases after an initial peak. In a second limit of a strong magnetic field, the initial field configuration was taken with the field strength on the disk decreasing outwards to small values so that collimation was reduced. As a result, a family of stationary solutions was discovered where matter is driven mainly by the strong magnetic pressure gradient force. The collimation in this case depends on the pressure of an external medium. These flows are qualitatively similar to the analytic solutions for magnetically driven outflows. The problem of the opening of a closed field line configuration linking a magnetized star and an accretion disk is also discussed.

Lovelace, R. V. E.↗
NASA NTRS1999

Fabrication of Large YBCO Superconducting Disks

We have undertaken fabrication of large bulk items to develop a repeatable process and to provide test articles in laboratory experiments investigating reported coupling of electromagnetic fields with the local gravity field in the presence of rotating superconducting disks. A successful process was developed which resulted in fabrication of 30 cm diameter annular disks. The disks were fabricated of the superconductor YBa2Cu3O(7-x). Various material parameters of the disks were measured.

Koczor, Ronald J.↗
NASA NTRS1997

Polarization of Line Emission from an Accretion Disk and Application to ARP 102B

We model the polarization properties of line emission from an accretion disk under a range of assumptions about the source function and electron-scattering optical depth tau(sub es). For small values of tau(sub es) and modest viewing angles, polarization can be in excess of the Chandrasekhar result for tau(sub es) = infinity. The polarization vector can be either parallel or perpendicular to the projected direction of the disk axis. The polarization properties of the double-peaked H-alpha emission line of the broad-line radio galaxy Arp 102B observed by Antonucci, Hurt, and Agol can be understood in terms of electron scattering and line broadening within the line-emitting region if tau(sub es) is of order unity, and if the position angle of polarization is parallel to the projected disk axis. The required small tau(sub es) is consistent with the hypothesis that the Balmer lines in Arp 102B are produced by photoionization of the disk atmosphere.

Chen, Kaiyou↗
NASA NTRS1999

Signatures of Exo-Solar Planets in Dust Debris Disks

We have developed a new numerical approach to the dynamics of minor bodies and dust particles, which enables us to increase, without using a supercomputer, the number of employed particle positions in each model up to 10(exp 10) - 10(exp 11), a factor of 10(exp 6) - 10(exp 7) higher than existing numerical simulations. We apply this powerful approach to the high-resolution modeling of the structure and emission of circumstellar dust disks, incorporating all relevant physical processes. In this Letter, we examine the resonant structure of a dusty disk induced by the presence of one planet of mass in the range of (5 x 10(exp -5) - 5 x 10(exp -3))M. It is shown that the planet, via resonances and gravitational scattering, produces (i) a central cavity void of dust; (ii) a trailing (sometimes leading) off-center cavity; and (iii) an asymmetric resonant dust belt with one, two, or more clumps. These features can serve as indicators of planet(s) embedded in the circumstellar dust disk and, moreover, can be used to determine the mass of the planet and even some of its orbital parameters. The results of our study reveal a remarkable similarity with various types of highly asymmetric circumstellar disks observed with the JCMT around Epsilon Eridani and Vega.

Ozernoy, Leonid M.↗
NASA NTRS2000

Implementing Journaling in a Linux Shared Disk File System

In computer systems today, speed and responsiveness is often determined by network and storage subsystem performance. Faster, more scalable networking interfaces like Fibre Channel and Gigabit Ethernet provide the scaffolding from which higher performance computer systems implementations may be constructed, but new thinking is required about how machines interact with network-enabled storage devices. In this paper we describe how we implemented journaling in the Global File System (GFS), a shared-disk, cluster file system for Linux. Our previous three papers on GFS at the Mass Storage Symposium discussed our first three GFS implementations, their performance, and the lessons learned. Our fourth paper describes, appropriately enough, the evolution of GFS version 3 to version 4, which supports journaling and recovery from client failures. In addition, GFS scalability tests extending to 8 machines accessing 8 4-disk enclosures were conducted: these tests showed good scaling. We describe the GFS cluster infrastructure, which is necessary for proper recovery from machine and disk failures in a collection of machines sharing disks using GFS. Finally, we discuss the suitability of Linux for handling the big data requirements of supercomputing centers.

Preslan, Kenneth W.↗
NASA NTRS2001

STIS Observations of the Disk and Outflow of the Herbig Ae Star HD163296

Coronagraphic imaging with the Space Telescope Imaging Spectrograph on board the Hubble Space Telescope reveals a approx. 450 AU radius circumstellar disk around the Herbig Ae star HDI63296. The disk includes an annulus of reduced scattering at 325 AU and exhibits a flat trend of surface brightness in to 180-222 AU, consistent with a cleared central zone. The disk is accompanied by a chain of nebulosities ("knots") oriented roughly perpendicular to the disk. Followup spectroscopy in the visible and the far ultraviolet confirms the Herbig-Haro nature of the observed knots. The FUV data in particular reveal the presence of a collimated, bipolar outflow, with a blue-shifted Lyman alpha jet that can be traced to within 0.06 arcseconds (7.3 AU) of HD163296 and a red-shifted Lyman alpha component that may be due to infall or to a poorly collimated wind. If the estimated age of this system is correct, these data indicate that protostellar outflows may last up to 10 times longer than previously believed.

Kimble, Randy↗
NASA NTRS2001

Vorticity and Wave Motion in a Compressible Protoplanetary Disk

The impact of an isolated vortex in a compressible Keplerian disk is examined using higher order numerical solutions of the Euler and entropy-conserving Energy equations. The vortex is stretched by the background shear flow with longer lasting anticyclonic vortices persisting for about 10 vortex revolutions. Simultaneously, the vortex emits transient radial waves consisting mainly of axisymmetrical weak shock waves and a slower, nonaxisymmetric Rossby wave. These waves may contribute to certain transient events in protoplanetary disks. The vortex stretching and waves were found to have little long-term feedback on the baseline 'standard solar nebula' disk structure and confirm the extremely stable structure of non self-gravitating disks.

Davis, Sanford S.↗
NASA NTRS2001

The Tensile Properties of Advanced Nickel-Base Disk Superalloys During Quenching Heat Treatments

There is a need to increase the temperature capabilities of superalloy turbine disks. This would allow full utilization of higher temperature combustor and airfoil concepts under development. One approach to meet this goal is to modify the processing and chemistry of advanced alloys, while preserving the ability to use rapid cooling supersolvus heat treatments to achieve coarse grain, fine gamma prime microstructures. An important step in this effort is to understand the key high temperature tensile properties of advanced alloys as they exist during supersolvus heat treatments. This could help in projecting cracking tendencies of disks during quenches from supersolvus heat treatments. The objective of this study was to examine the tensile properties of two advanced disk superalloys during simulated quenching heat treatments. Specimens were cooled from the solution heat treatment temperatures at controlled rates, interrupted, and immediately tensile tested at various temperatures. The responses and failure modes were compared and related to the quench cracking tendencies of disk forgings.

Gabb, Timothy P.↗
NASA NTRS2002

Evolution of Pre-Main Sequence Accretion Disks

The aim of this project is to develop a comprehensive global picture of the physical conditions in, and evolutionary timescales of, pre-main sequence accretion disks. The results of this work will help constrain the initial conditions for planet formation. To this end we plan to: (1) Develop much larger samples of 3-10 Myr-old stars to provide better empirical constraints on protoplanetary disk evolution; (2) Study the dusty emission and accretion rates in these systems, with ages closer to the expected epoch of (giant) planet formation at 3-10 Myr; and (3) Develop detailed model disk structures consistent with observations to infer physical conditions in protoplanetary disks and to constrain possible grain growth as the first stage of planetesimal formation.

Hartmann, Lee W.↗
NASA NTRS2002

Burst Testing of a Superalloy Disk with a Dual Grain Structure

Room temperature burst testing of an advanced nickel-base superalloy disk with a dual grain structure was conducted. The disk had a fine grain bore and a coarse grain rim. The results of this test showed that the disk burst at 39,100 rpm in line with predictions based on a 2-D finite element analysis. Further, significant growth of the disk was observed before failure which was also in line with predictions.

Gayda, John↗
NASA NTRS2003

Realistic Subscale Evaluations of the Mechanical Properties of Advanced Disk Superalloys

A series of experimental powder metallurgy disk alloys were evaluated for their processing characteristics and high temperature mechanical properties. Powder of each alloy was hot compacted, extruded, and isothermally forged into subscale disks. Disks were subsolvus and supersolvus heat treated, then quenched using procedures designed to reproduce the cooling paths expected in large-scale disks. Mechanical tests were then performed at 538, 704, and 815 C. Several alloys had superior tensile and creep properties at 704 C and higher temperatures, but were difficult to process and prone to quench cracking, chiefly due to their high gamma prime solvus temperature. Several other alloys had more favorable processing characteristics due to their lower gamma prime solvus temperature and balanced time-dependent properties at 704 C. Results indicate an experimental low solvus, high refractory alloy can build upon the best attributes of all these alloys, giving exceptional tensile and creep properties at high temperatures with good processing characteristics due to a low gamma prime solvus.

Gabb, Timothy P.↗
NASA NTRS2004

High Temperature Burst Testing of a Superalloy Disk With a Dual Grain Structure

Elevated temperature burst testing of a disk with a dual grain structure made from an advanced nickel-base superalloy, LSHR, was conducted. The disk had a fine grain bore and coarse grain rim, produced using NASA's low cost DMHT technology. The results of the spin testing showed the disk burst at 42 530 rpm in line with predictions based on a 2-D finite element analysis. Further, significant growth of the disk was observed before failure which was also in line with predictions.

Gayda, J.↗
NASA NTRS2004

[Predicting Spectra of Accretion Disks Around Galactic Black Holes]

The purpose of this grant was to construct detailed atmosphere solutions in order to predict the spectra of accretion disks around Galactic black holes. Our plan of action was to take an existing disk atmosphere code (TLUSTY, created by Ivan Hubeny) and introduce those additional physical processes necessary to make it applicable to disks of this variety. These modifications include: treating Comptonization; introducing continuous opacity due to heavy elements; incorporating line opacity due to heavy elements; adopting a disk structure that reflects readjustments due to radiation pressure effects; and injecting heat via a physically-plausible vertical distribution.

Krolik, Julian H.↗
NASA NTRS2004

Dusty Disks, Diffuse Clouds, and Dim Suns: Galactic Science with the Infrared Spectrograph on the Spitzer Space Telescope

The Infrared Spectrograph (IRS) on the Spitzer Space Telescope has now been in routine science operations since Dec. 14,2003. The IRS Science Team has used a portion of their guaranteed time to pursue three major science themes in galactic astronomy: the evolution of protostellar disks and debris disks; the composition and evolution of diffuse matter and clouds in the interstellar medium; and the composition and structure of brown dwarfs and low-mass main-sequence stars. We report here on the results from the first five months of IRS observations in these programs. Full IRS Spectra have already been obtained for large samples of YSO/protoplanetary disks in the Taurus and TW Hya associations, and or debris disks around main-sequence stars, in which many aspects of the evolution of planetary systems can be addressed for the first time. As anticipated, the mid-infrared IRS observations of brown dwarfs have yielded important new information about their atmospheres, including the identification of NH3 and measurements of new methane features. This work is based on observations made with the Spitzer Space Telescope, which is operated by the Jet Propulsion Laboratory, California Institute of Technology under NASA contract 1407. Support for this work was provided by NASA's Office of Space Science.

Roellig, T. L.↗